Answers
Answer:
I'm pretty sure you have it correct
Related Questions
Which is NOT an assumption of matter made by the kinetic molecular theory of gases?
a. The kinetic energy of particles is determined by their mass and their velocity.
b. Gas particles are widely dispersed and therefore are not affected significantly by attractive or repulsive forces.
c. Gas particles are small and take up little volume relative to the volume of the space around them.
d. When particles collide, their total energy is decreased.
Answers
Answer:
There is strong attraction or repulsion between the gas particles.In other words,they strongly interact with each other" is NOT an assumption made by kinetic molecular theory.
The theory that attempts to elucidate the behaviour of gases is known as kinetic molecular theory.
The postulates of kinetic molecular theory of gases are given below,
\bigstarGases consist of large number of identical particles(atoms or moleculesthat are so small and so far apart
\bigstar There is no force of attraction between the particles of a gas at ordinary temperature and pressure
\bigstarParticles of a gas are always in constant and random motion
\bigstarParticles of a gas move in all possible directions in straight lines. During their random motion, they collide with each other and with the walls of the container
\bigstarCollisions of gas molecules are perfectly elastic. This means that total energy of molecules before and after the collision remains same
\bigstarThe average kinetic energy (energy due to motion) of the gas particles is proportional to the temperature measured in kelvin. As temperature increases, the particles move faster and have more energy
\bigstarAt any particular time, different particles in the gas have different speeds and hence different kinetic energies.
\therefore From the above data it is clear that "There is strong attraction or repulsion between the gas particles.In other words,they strongly interact with each other" is NOT an assumption made by kinetic molecular theory.
Explanation:
According to Kinetic theory of gases, the kinetic energy of particles are derived from the temperature and not by their mass and velocity. Hence, option a is not an assumption of kinetic theory of gases.
What is kinetic theory gases ?According to kinetic theory of gases, gases substances are made of tiny particles. These particles when taken in a container have negligible volume compared to the volume of the container.
The collision between the gaseous particles and and between the particles and the wall make the pressure within the container. The kinetic energy of the particles is directly proportional to the temperature of the gas.
According to the theory, the kinetic energy is not determined from the mass and velocity of the particles, but by the temperature of the system. Hence, option a is not an assumption of kinetic molecular theory of gases.
Find more on kinetic theory:
https://brainly.com/question/14349214
#SPJ3
20. How many atoms of Lithium (Li) are in the REACTANTS side of the
equation?
Answers
Answer:
2 atoms
Explanation:
The reactants side is the left side of the arrow. Li represents lithium and there is a 2 next do it which indicates that there are 2 lithium particles or atoms
2. Describe two ways in which you could decide when an
acid has been completely neutralised by an insoluble
carbonate.
Answers
Answer:
search in chrome u will get your answer
Explanation:
15. What is the molar mass of H2CO3?
(atomic mass: C = 12.01, H = 1.01, 0 = 15.99)
Answers
Answer:
62.00
Explanation:
H2 means that there are two moles of hydrogen so multiply the atomic mass by two (1.01 × 2 = 2.02)
C only has one mole sp leave 12.01 alone
And multiply oxygen by 3 because there are three moles of oxygen (15.99 × 3 = 47.97)
Add them all together!
2.02 + 12.01 + 47.97 = 62.00 for molar mass
Fill in the blanks according to the chemical reaction below to
indicate how many molecules of each substance are present.
N2 + 3H2 + 2NH3
Substance
N2
H2
NH3
Molecules Present (Coefficient)
Answers
The molecules or coefficient of N2 would be 1, that of H2 would 3, and that of NH3 would be 2.
From the balanced equation of the reaction:
[tex]N_2 + 3H_2 ---> 2NH_3[/tex]
1 mole of N2 will react with 3 moles of H2 in order to produce 2 moles of NH3. In order words, the mole ratio of N2 to H2 to NH3 in the reaction will always be 1:3:2.
Thus, the coefficient of N2 in the equation will be 1, the coefficient of H2 will be 3, and the coefficient of NH3 will be 2.
More on balancing equations can be found here: https://brainly.com/question/7181548?referrer=searchResults
Answer: 3:2
this is the answer I came up with that was correct after I did the question in ck12
Name the following compounds:
Answers
Answer:
why
Explanation:
why don't we need to answer, did you already found the answers
what happens when
limestone is heated
Answers
Answer:
When limestone is heated strongly, the calcium carbonate it contains absorbs heat (endothermic ) and decomposes to form calcium oxide. Calcium oxide (also known as quicklime) is a key ingredient in the making of cement and is also used to make certain types of plaster.
Explanation:
Limestone heated
When limestone is heated strongly, the calcium carbonate it contains absorbs heat (endothermic ) and decomposes to form calcium oxide. ... Calcium oxide (also known as quicklime) is a key ingredient in the making of cement and is also used to make certain types of plaster.
Burning Limestone
Burning limestone, which is calcium carbonate, gives you quick lime, calcium oxide. Mixed with water this produces slaked lime, calcium hydroxide. ... This is soft when first mixed, but with time absorbs carbon dioxide from the atmosphere and hardens as it reverts back to calcium limestone.
Limestone exposed to heat and pressure.
Marble is a metamorphic rock that forms when limestone is subjected to the heat and pressure of metamorphism. ... Under the conditions of metamorphism, the calcite in the limestone recrystallizes to form a rock that is a mass of interlocking calcite crystals.
2A → B + C The above reaction is run and it is found that a plot of the natural log of the concentration versus time is linear. This indicates that the reaction is ...
Answers
Answer:
zero order reaction
Explanation:
The seem to be a reaction is zero order as the data only fits to zero order integrated rate law.
Integrated rate law:
[A] = [A]_0 – kt
Here y = [ A] and slope is -k , so when we plot concentration of A with respect to t then we get the equation in the form of line
y = mx + c
So the answer Zero order in [A]
Which statement is correct about the law of conservation of energy?
Energy is created when water freezes.
Energy is destroyed when sugar is burned.
Energy stays inside molecules permanently.
Energy is transferred when atoms are rearranged.
Answers
Answer:
Energy is transferred when atoms are rearranged
Explanation:
Breaking bonds between atoms need energy. When new bonds are formed, energy is released
The law of conservation of energy is energy isn't created or destroyed
A and B are wrong because there is creation or destruction of energy
C is wrong because energy can be transferred (think touching a hot stove with your finger. heat is transferred from the stove to your finger OUCH!)
D is correct because the energy is still there, but in a different form
can someone answer the 4 questions? (4 is optional) it would really help me out thanks
Answers
Answer:
1)Energy converter is the transformation of one form of energy into another form .It is more specifically that the term energy conversions refers to the process through which energy is changed into forms that are useful to humans .For 100 of years humans have used an array of devices and systems for this purpose.
2) The three energy converters that you or your family use regularly are
Electric Iron Electric BulbElectric generator3)The three kinds of power plants that produce electricity in Ontario are
Nuclear Power PlantsHydroelectric Power PlantsGeothermal Power Plants4)A power plant is an industrial facility that generates electricity from primary energy most of the power plants use one more generators that convert mechanical energy into electrical energy in order to supply power to the electrical grid for society's electrical needs.
may be this was ur answer for ur question u wanted
Consider the reaction H2(g) + I2(g) Double headed arrow. HI(g) with an equilibrium constant of 46.3 and a reaction quotient of 525. Which direction will the system shift to?
Answers
Answer:
The reaction shifts to the left.
Explanation:
Equilibrium constant (K) = 46.3
Reaction Quotient (Q) = 525
The relationship between Q and K with their implications are given as;
K = Q (No net reaction)
K > Q (Reaction shifts to the right)
K < Q (Reaction shifts to the left)
Since in this question, Q (525) > K (46.3)
The reaction shifts to the left.
8. Write the notation of an atom 'X', if the mass number is A and the atomic number is Z.
Answers
Answer:
[tex]^A_ZX[/tex] is the notion of an atom 'X', if the mass number is A and the atomic number is Z
Explanation:
The symbol of the element is "X"
The notion comprises of symbol of element "X" in the center.
On the upper left side of the symbol mass number "A" is kept and on the lower left side of the symbol, atomic number "Z" is kept.
Thus, notion will be
[tex]^A_ZX[/tex]
How can sand be classified as individual evidence?
Answers
Answer:
Individual Characteristics are properties of physical evidence that can be attributed to a common source with a high degree of certainty. Examples of individual evidence include anything that contains nuclear DNA, toolmarks, and fingerprints.
Explanation:
Why are metals so strong and hard ?
Answers
Answer:
Metals are tough because of an effect called plasticity
Explanation:
if you want to know more go to this site
https://en.wikibooks.org/wiki/A-level_Physics_(Advancing_Physics)/Metals#:~:text=Metals%20are%20tough%20for%20the,This%20effect%20is%20called%20plasticity.
Answer:
The strength of metal depends upon the status of its molecular bonding in the lattice. Stronger the forces stronger will be the metal.
Is this answer right ?
Answers
Answer:
YESExplanation:
Explanation
#KEEPSTUDYINGYes because it released the most amount of heat overall!!! well done xx
PLZZZ HELP BRAINILEST (science)
Answers
Answer:
i cannot see the question due to the flash you used
Explanation:
Create a timeline to show how atomic structure was developed over the centuries?
Answers
Answer A`bousi
Explanation:
A STACK OF BOOKS WEIGHED 5 KILOGRAMS. ONE BOOK, WHICH WEIGHED 1,000 GRAMS, WAS
REMOVED FROM THE STACK HOW MUCH DID THE REMAINING BOOKS WEIGH?
Answers
Answer:
the remaining books weigh 4 kilograms or 4000 grams
Is Octisalate (C15H22O33) ionic or covalent?
Answers
Look at the dots around each symbol and the energy levels from the resources above;
Answer the questions in the text entry option for this assignment.
Copy and paste questions and respond in complete sentences.
Include a space between each question.
Be specific with your responses for each question. Assume your reader has no knowledge of the subject and you are teaching them via your answers.
Please answer the following questions:
Why does Na have only one dot?
Why do none of these diagrams show more than 8 dots?
What relationship do you notice between the dots in these two charts?
The number of dots that hydrogen and helium have in their dot diagram is the same as the number of electrons shown for them on the Periodic Table. Why? (Hint: Octet Rule (Links to an external site.))
Answers
Hello! Here's the answer I was able to come up with:
Why does Na have only one dot?
Sodium, or Na, has only one valence electron. (This makes the atom tend to participate in ionic bonding and "give" its single valence electron to an atom like chlorine.)
Why do none of these diagrams show more than 8 dots?
It is physically impossible for an atom to have more than 8 electrons in its valence layer, according to the Octet Rule.
What relationship do you notice between the dots in these two charts?
The dot diagram for each element represents the number of electrons each element will have in its outermost, or valence, shell. (2-8-8)
The number of dots that hydrogen and helium have in their dot diagram is the same as the number of electrons shown for them on the Periodic Table. Why?
An atom can have a maximum of two electrons in its innermost layer. Hydrogen and helium have only one and two electrons, respectively, so they don't have enough electrons to actually have more than one layer. Therefore, their outermost layer is, in fact, their only layer. This is why the number of dots that hydrogen and helium have in their dot diagram is the same as the number of electrons shown for them on the Periodic Table.
Don't copy this word for word! You will most likely be in trouble for plagiarism. Instead, rewrite these ideas in your own words, or paraphrase. Good luck, and I know you can do it! ♥
An ionic compound that conducts electricity is called an ______
Answers
Answer:
Electrolyte
hope it helps and your day will be full of happiness
which horizon has the least weathered rocks? How do you know?
Answers
Answer:
C: The C horizon is a subsurface horizon. It is the least weathered horizon. Also known as the saprolite, it is unconsolidated, loose parent material. The master horizons may be followed by a subscript to make further distinctions between differences within one master horizon.
Explanation:
PLEASE HELP I WILL MARK YOU BRAINLIEST How many moles of FeCl2 do you need to react 5 moles of Cl2?
Answers
Answer:
1. Ok, so you have a 1:1 ratio of FeCl2 to FeCl3, which is shown by the fact that if you react 2 moles of FeCl2 you get 2 moles of FeCl3. So therefore, if you react 4 moles of FeCl2, you'd form 4 moles of FeCl3.
2. You have a 1:2 ratio of Cl2 to FeCl2, for every 1 mole of Cl2, you need 2 moles of FeCl2, so therefore, for 7 moles of Cl2, you need 2x7moles = 14 moles
3. 1:1 ratio. So you start with 2.28moles.
4. 1:2 ratio of Cl2 to FeCl2, so therefore to get from FeCl2 to Cl2 you need to divide by 2. Therefore, you need 3.25moles / 2 = 1.625 moles
Explanation:
pls mark branliest
Im not entirely sure how to do this would someone mind answering it for me?
Answers
why is no one helping me this is some bs
Answers
why do scientist think the earths core have iron in it .
Answers
Sorting and separating are ways to classify matter using _______ properties. Your answer
I need help on this :/
Answers
Answer:
Physical
Explanation:
Hope this helps :)
Predict the shape of the molecule.
B. trigonal planar
A. linear
D. bent
C. tetrahedra
Answers
chemical equation Water decomposes into hydrogen and oxygen.
Answers
Water is a chemical compound also known as H2O and is composed of two hydrogen atoms (H) and one oxygen atom (O).
2 H2O → 2 H2 + O.
Consider a buffer solution that is 0.50 M in NH3 and 0.20 M in NH4Cl. For ammonia, pKb=4.75. Calculate the pH of 1.0 L of the solution upon addition of 30.0 mL of 1.0 M HCl to the original buffer solution.
Express your answer to two decimal places.
***will mark Brainliest for right answer ***
Answers
30.0 mL of 1.0 M HCl is 0.0300 mol of HCl. This will react with the NH3 to produced 0.030 mol of NH4+.
You now have 0.47 mol NH3 and 0.23 mol NH4+. Now use the Henderson-Hasselbach equation to calculate your pH. The equation says to use concentration of acid and base, but you can just use the moles of them because it doesn’t make a difference.
pH = pKa + log(base/acid)
pKa = 14 - pKb = 14 - 4.75 = 9.25
pH = 9.25 + log(0.47/0.23) = 9.56
The pH of the solution is 9.56.
Given:
Mol of NH₃ = 0.50
Mol of [tex]NH_4^+[/tex] = 0.20 to start (NH₄Cl dissolves completely)
Molarity = 1.0 M
30.0 mL of 1.0 M HCl is 0.0300 mol of HCl.
This will react with the NH₃ to produced 0.030 mol of [tex]NH_4^+[/tex] .
Henderson-Hasselbach equation:This equation is used to calculate pH. It is an approximate equation that shows the relationship between the pH or pOH of a solution and the pKa or pKb and the ratio of the concentrations of the dissociated chemical species
pH = pKa + log(base/acid)
pKa = 14 - pKb
pKa= 14 - 4.75
pKa= 9.25
pH = 9.25 + log(0.47/0.23)
pH = 9.56
Thus, the pH of the solution is 9.56.
Find more information about pH here:
brainly.com/question/22390063