what are some benfits of getting involved with 4h

Answers

Answer 1

Answer:

the kids can get smarter and make the country where they live better

4h can help with making the next generation better, and better if we help them


Related Questions

Please help for our stem project :(

Explain how Ratio and proportion affect the strength of the Bridge.

STEM Project

Answers

Answer:

Do you have some a picture

the basic purpose of adjusting the fuel/air mixture at altitude is to

Answers

Answer:

The basic purpose of adjusting the fuel/air mixture at altitude is to. ... increase the amount of fuel in the mixture to compensate for the decrease in pressure and density of the air

what are the potential problems with the ag gag laws

Answers

Answer:

Ag-gag laws pose a threat to a wide spectrum of values and issues Americans care about. Social issues potentially negatively impacted by ag-gag laws include, but are not limited to: Animal Welfare. Food Safety.

Explanation:

A technician notes that an operating air-conditioning system has ice formed on the suction line at the condensing unit. The technician can reasonably assume that:

Answers

The technician can reasonably assume that evaporator coil is frozen over.

An air-conditioning system makes a place cooler by absorbing heat from the

surrounding. This is usually done with the aid of the evaporator coil.

In situations whereby there are ice particles formed on the suction line at the

condensing unit then it means the air conditioning system is faulty and must

be turned off to prevent damage to other parts.

Read more about Air conditioning system here https://brainly.com/question/24920322

2) What kinds of food can you eat in space?

Answers

Answer:

fruits, nuts, peanut butter, chicken, beef, seafood, candy, brownies now  if we talking about drinks ,coffee, tea, orange juice, fruit punches and lemonade

Explanation:somehow this all are delicious

what is created that highlights how to use the system and how to troubleshoot issues or problems?

Answers

Answer:

In this phase, the detailed user documentation is created that highlights how to use the system and how to troubleshoot issues or problems.

Explanation:

its all i got sorry but hope it helps a lil

can someone help showing the steps please​

Answers

Answer:

  a) 20 Ω

  b) 1 A

  c) 10 V on each

  d) 1/3 A through each

  e) 10 W in R1, 3 1/3 W in the others

  f) 20 W

Explanation:

The three 30 Ω resistors are in parallel with each other, so will have an equivalent resistance of (30 Ω)/3 = 10 Ω.

(a) The total circuit resistance is 10 Ω + 10 Ω = 20 Ω.

__

(b) All of the current supplied by the battery passes through R1. The current supplied by the battery is ...

  I = V/R = (20 v)/(20 Ω) = 1 A

__

(c) The voltage drop on R1 is (1 A)(10 Ω) = 10 v. Subtracting that from the battery voltage gives the voltage drop on the other resistors:

  20 v -10 v = 10 v . . . . drop on R2, R3, R4

__

(d) The current through resistors R2, R3, R4 is ...

  I = V/R = (10 v)/(30 Ω) = 1/3 A

__

(e) Power can be computed several ways. Here, it may be easiest to use ...

  P = VI

For R1, that is P1 = (10 v)(1 A) = 10 W

For R2-R4, that is P2-P4 = (10 v)(1/3 A) = 10/3 W = 3 1/3 W

__

(f) The total power dissipated is the total power supplied:

  P = VI = (20 v)(1 A) = 20 W

Adding up the power in the resistors, we get ...

  P = 10 W + 3·(10/3 W) = 20 W

true or false tensile forces are smaller in arch bridges

Answers

Answer:

True

Explanation:

The tensile forces are small in most arches and usually negligible.

What is the voltage across the load, RL, in
this voltage divider network?
10.25 V
4.55 V
5.71 V
11.50 V

Answers

Answer:

  (c)  5.71 V

Explanation:

The circuit can be redrawn to a Thevenin equivalent that is 6V through a 5-ohm resistor into a 100-ohm load. Then the voltage at the load is ...

  (6 V)(100/(100 +5) ≈ 5.71 V

1. What are hand tools ? *
1 point
2. Give one example and one use of the following handtools I. Measuring tool II. Cutting Tool III. Striking tool *
6 points
3. Name the hand tool used to drive nails *
1 point
4. Name the hand tool used to cut plastic and metal pipes *
1 point
5. Which hand tool is used to clamp your work piece to the work table ? *
1 point
6. What are portable power tools? *
1 point
7. Name the power tools used to carryout the following operations I. Boring holes II. Cutting curves III. Sanding *
3 points
8. List three examples of stationary machines *
3 points

Answers

Answer:

Microsoft Word - Hand tools SON

How do robots demonstrate the modern, technological Japan? *



Answers

Robots demonstrate modern, technological Japan because it serves as brought economical success to Japan since it help them to build products faster and efficiently.

According to the question, we are to discuss how the robot help japan in terms of technology and modernization.

As a result of this we can see that Japan is moving forward in technology with development of robot because it makes them to build more products.

Therefore, Robot has  brought economical success to Japan

Learn more about robot at:

https://brainly.com/question/10387419

John has an exhaust leak in his Acura Integra GS-R, What steps would he take to fix the leak in time for his inspection?

Answers

Answer:

Explanation:

Fist you need to identify where the leak is coming from. You can do this by either listening for the leak or spraying soapy water on the exhaust to look for air bubbles coming out of the exhaust. Depending on the spot of the leak there are many ways you can fix this leak.

1. Exhaust clamp

2. Exhaust putty

3. Exhaust tape

4. New exhaust

Exhaust clamp is best used for holes on straight pipes.

Putty is best used on welds or small holes like on exhaust manifolds or welds connecting various pieces like catalytic converters, mufflers, or resonators.

Tape will work best on straight pipes with holes.

New exhaust is for when the thig is beyond repair, like rust.

Now good luck because working on exhausts is a pain.

Many amateur video games suffer from what kind of layout?
A. an overly neutral layout
B. an overly simplistic layout
C. an over-crowded layout
D. a boring layout

Answers

Answer:

D a boring layout I think but you welcome

¿Qué es una restricción FACTIBLE?
El tema es sobre Programación Lineal.

Por favor no se roben los puntos, necesito una respuesta.


NO WIKIPEDIA.

Answers

Answer: A feasible solution for a linear program is a solution that satisfies all the constraints of the linear programming problem. There could be many solutions that satisfy all the restrictions. Any point in the feasible region is a feasible solution for the LPP. A feasible solution for a linear program is a solution that satisfies all the constraints.

Explanation: Hope this helps: ^

All of the following are examples of capital intensive industries EXCEPT: *
1 point
Soft drink production
oil extraction
manufacturing
hospitality

Answers

Answer:

hospital

Explanation:

Soft drink production is a capital intensive industry as it's depends upon the economy and trade.Oil extraction is a national industry and it also involves the intention of trade.Manufacturing is similar to soft drink production and has intense of trade.Hospital doesn't has the intention of trade so it's the answer

Select the correct answer. which process involves creating a product by heating metals and changing their shape through the application of mechanical force?

A. finishing
B. forming
C. assembling
D. casting

would it be forming? or casting? I'm so lost​

Answers

Answer:

I would say that it is forming.

Explanation:

Give brainliest if u can. :S

what element is the primary constituent of ferrous alloys?

Answers

what element is the primary constituent of ferrous alloys?
Answer: Ferrous alloys or metals are metals that consist mostly of iron (Fe). Steel is an iron-based alloy containing typically less than 1% carbon, where iron frequently contains 2% or more carbon.

determine the moments of inertia of the quartercircular area about the x- and y- axes, and find the polar radius of gyration about point o.

Answers

I can’t take a full photo of step one so sorry but this is the step 2 and step 3 with the final answer


(b) The application of user centred design can lead to innovative products such as the umbrella shown in Figure 9.

Explain the concept of user centred design and how it may have influenced the design of the umbrella shown in Figure 9. (6 marks)

Answers

Answer:

the concept of user centred design is the idea of putting your clients best needs in mind. you need to be empathic and understanding of how to make their life easier. by doing research you can do this. for example the design in figure 9 shows an umbrella with a canopy. the canopy can deflect rain and still have the easy design of an umbrella. this makes it not only easier to use but functional.

Explanation:

i wrote this myself so copy it or just rewrite it, it doesnt matter

in what flight condition is torque effect the greatest in a single-engine airplane?

Answers

Answer:

Low airspeed, high power, high angle of attack

At an open or uncontrolled intersection, yield if _____.
Need Help

Answers

If you are the last vehicle

Help!!
So I think that someone is tracking my truck with an apple airtag but I don't know for sure. The only apple product I have is an iPad and I don't know how to check if an airtag is near by!!

Answers

Explanation:

I mean honestly it depends like how old is it? is it one of the newer generations because a majority of apple products have airtags but their is also the lost my iPhone app so they can track where ever their iPad or iPhone is.

Ok it depends how old it is

Which is NOT an example of labour intensive industry?

Healthcare practitioner
steel production industry
local farmers
small cakery

Answers

Answer:

small cakery

Explanation:

it only makes food it does not cut logs, wood etc.

Answer:

small cakery

Explanation:

cakery or bakery don't require labour services almostThere hardly one or two person works so it can't be called labour intensive industry

WHICH LUBRICATION SYSTEM RECEIVES OIL FROM THE OIL SUPPLY TANK, PRESSURIZES THE OIL, SENDS THE OIL THROUGH THE FILTER AND DELIVERS THE OIL TO THE BEARINGS

Answers

Answer:

The following is the answer.

Explanation:

PRESSURE SYSTEM.

Oil refining is an example of:

Construction Production
Extractive Production
Domestic Production
Traditional Production

Answers

Extractive industry, can be defined as a processes that involve different activities that lead to the extraction of raw materials from the earth (such as oil, metals, mineral and aggregates), processing and utilization by consumers.

1. Write an equation that shows the equivalency between meters and Gigameters.

Answers

The equation is below:
10^9 m = 1 Gm

True of false an understaffed store can cause loss of inventory

Answers

Answer:

probably true, if it's understaffed people are more likely to steal and the overworked workers that still remain are likely to make more mistakes

True.

It's important to keep a balance of store labor with incoming consumer traffic. Understaffing affects the impact of profitability.

a wire is not strong enough to pick up a washer or much of anything. what is a way to strengthen the magnetic field?

Answers

Answer:

making it straight and making it exercising every time

if a population has no predadors and plenty of available resources, how might that population change

Answers

Answer:

B (exponential growth )

Explanation: wish u the best bby <33

MANUFACTURING QUESTION PLEASE HELP​

Answers

Answer:

"He then pours the metal into a mold and allows it to solidify."

Other Questions
What did Eli whitney innovators with the effects f their contributions Read the text The History of Ice Cream:(1) I scream, you scream, we all scream for ice cream! Who doesn't love a nice, cold scoop of ice cream on a warm day? For thousands of years, ice cream has been a decadent dessert loved by most people around the world.(2) There is some argument about who first invented ice cream. Some believe that ice cream was invented by the Chinese people anywhere from 2,000 to 6,000 years ago. They created a recipe of frozen milk and rice that was served as a dessert. Persia has also been credited with first serving frozen desserts. Over 2,000 years ago, the wealthy people of Persia enjoyed shaved ice from the mountains, covered with grape juice. They later learned to freeze rosewater and add different fruit toppings. These desserts were considered delicacies that only the richest families could experience. About 1,000 years after this, there is evidence that suggested Nero, the Roman Emperor, also enjoyed frozen treats and demanded that a constant supply of ice from the mountains be available to him. He liked to add honey to the top of his dessert.(3) Ice cream as we know it can be traced back to the 9th century in Arab cities, such as Baghdad, Damascus, and Cairo. Near the end of the 13th century, Marco Polo returned to Italy after his travels through China with news of a frozen creamed dessert. In Europe, ice cream could only be found in Italy. Then, in 1533, Italian noblewoman Catherine de'Medici of Italy married Henry II of France. As Queen, Catherine introduced ice cream to France. Soon, the popularity of the dessert spread across all of Europe.(4) The first recorded account of ice cream in the United States was in 1744. In a written letter, a guest of Maryland Governor William Bladen detailed a delicious frozen dessert featuring strawberries and milk. The invention of electricity and manufacturing meant that ice cream could be made and kept much more easily, and the popularity of the frozen treat grew quickly across the country.(5) To start, ice cream was served in a dish. It wasn't until the late 19th century that the ice cream cone made its first appearance. As with ice cream itself, there has always been some controversy over who the true inventor of the ice cream cone was. It is claimed that in 1896, a man by the name of Italo Marchiony invented the ice cream cone in New York City. He was granted a patent for this cup-shaped invention in 1903. Then, in 1904, ice cream was served in a true conical-shaped cone by Ernest Hamwi at the St. Louis World Fair. Whoever the true inventor was, the discovery caught on, and by 1924, Americans were eating over 200 million ice cream cones a year!Read the text "How Ice Cream Is Made":Ice cream is a frozen blend of sweetened cream and air with added flavoring. This is how it is made commercially.Necessary Ingredients:Dairy products, including milk, cream, and butter fatSugarEggsFlavoringApproved additives to prevent ice crystals during production processProduction Steps:Step 1: To start, the ingredients are carefully measured and then combined together. The dairy ingredients, solids, and additives are blended well to ensure the liquid and dry components are completely mixed.Step 2: Next, the mix is pasteurized. This means it is heated to high temperatures to remove any bacteria which could be found in the raw ingredients. Pasteurization can occur at 155F for 30 minutes or 175F for 25 seconds. The temperatures used to pasteurize ice cream need to be higher than those used for milk because the mixture includes high-fat dairy sources, sweeteners, and egg yolks.Step 3: Following pasteurization, the ice cream mix is homogenized. This occurs when the fat globules in the cream are broken down into smaller parts through vigorous mixing. Once homogenized, the ice cream should be very smooth and uniform, meaning free of bubbles. Now the ice cream will be easier to whip and will not melt as fast.Step 4: The next step is to let the ice cream mixture stand for at least four hours. During this time, the fat cools and forms crystals.Step 5: A special barrel freezer is then used to gradually freeze the ice cream. The machine also pumps clean air into the mix. This keeps the ice cream soft and allows it to absorb the different flavorings. Without the air, the mixture would become as hard as an ice cube.Step 6: During freezing, flavoring can be added. Ice cream flavors have moved on from plain vanilla and chocolate to include hundreds of combinations using fruit, nuts, candy, cookies, and other baked goods.Step 7: Finally, the ice cream is packaged and put into a blast freezer where the temperature is between -22 to -40 Fahrenheit.How does paragraph 4 of The History of Ice Cream relate to Step 7 of "How Ice Cream Is Made"? napthalene combustion can be used to calibrate the heat capacity of a bomb calorimeter The heat of combustion of naphthalene is -40.1kj/g. When .8210g of naphthalene was burned in a calorimeter containing 1,000g of water, a temperature rise of 4.21C was observed. What is the heat capacity? A contractor can spend at most $350 a day on operating costs and payroll. It costs $75 each day to operate the forklift and $55 a day for each crew member. Write an inequality to represent the contractor's budget for the day. 75 55x 350 75 55x 350 75x 55 350 75x 55 350. fjhkfjkfhklghjlghjkl Tom and Rosie are designing a game. In each turn, a player rolls five 666-sided dice and adds the numbers showing on each face to determine how many points they get that turn. For example, the lowest number of points in a given turn is 1+1+1+1+1=51+1+1+1+1=51, plus, 1, plus, 1, plus, 1, plus, 1, equals, 5 points, and the highest is 6+6+6+6+6=306+6+6+6+6=306, plus, 6, plus, 6, plus, 6, plus, 6, equals, 30 points. They let XXX represent the sum in a given turn, and they find the expected value of XXX is E(X)=17.5E(X)=17.5E, left parenthesis, X, right parenthesis, equals, 17, point, 5 points. Tom says, "A player will most likely get 17.517.517, point, 5 points in any given roll." Rosie says, "Over 100100100 turns, we can expect a total of about 175175175 points." Whose statement is correct based on the expected value? 3. A strain of cells undergoes a mutation that increases the permeability of the innermitochondrial membrane to hydrogen ions.a) What effect would you expect this mutation to have on the process of cellularrespiration? 12b) Assuming the mutant cells can survive, how might the metabolic requirements ofthese cells differ from those of a non-mutant strain of the same variety? 12 Intermediaries are businesses involved in selling the goods and services of producers to consumers and other businesses.b. Falsea. True Why has George, throughout the novel, been trying to buy Tom'scar?The great gastby Six grapefruit cost as much as a dozen oranges. The cost of a dozen grapefruit and two dozen orangesis $12. If Susan purchased one orange and one grapefruit, how much did she spend? Show yourthinking.a.Write System of equations for the above problem.b. Solve the system of equationsc.Explain the meaning of the solution in the context of the problem. What is the probability for a bowler to score over 136? The mean for the set is 130, and the standard deviation is 3. So I know that it is Mean + 2(Standard Deviation), so is it 2.35% or 2.5%? All of the following are functions of the nervous system except. the leading cause of cancer death is attributed to what type of cancer? Resultant of two froce 3N nad 4N acting ar apoit is 5N show that the two froce are 2 perpendicular to each other huang 3 shirts that each cost the same amount, a pair of pants that cost $12, and he pays with a $100 bill. Whichexpression represents the amount of change Huang should receive? Select three options.100-(3)100--12)(100-12) - 3(100-12)*x*)100-x) - 12 Which type of muscle cell can have multiple nuclei The owner of a small store buys coats for 55.00 each He sells the coats for 66.00 each what is the answer to 5x+1=3x+7 PLEASE HELP ME 50 POINTSS 1!1!1!1!1!1!1!1!1!11!1!1!1!How long does it take a baseball moving with an averagespeed of 35 m/s to travel 18 m?What is the average speed of a car that travels 870 km in 14.5h? (g) Will he pass the exam!6. Change the following speech into indirect speech.(a) He said to me, "Write your name on this paper."(b) He said to me,"Wait for me here."(c) He said to them "Don't go out alone."(d) He said to me,"Type this letter immediately."(6) Peter said, "Don't do it again."(The students said, "We may be a little late."(g). He said, "You must answer this question."(h) He said, "I can't stay out very late."() She said to me, "You ought tomore careful."(k) I said to them, "Don't write on your desks."