Answer:
Solar energy causes evaporation; uneven heating of the Earth causes air masses to move; Coriolis forces help storms to take shape; and gravity makes rivers flow downhill. Another relevant factor is the high heat capacity (or specific heat) of water.
Explanation:
hoped this helped;)
Write the electronic configuration of the following element or ion and circle on their valance electrons
A.27 Al =
13
B. 31p-3
15
please answer my question now ! I will give you a Brinalist
1s2,2s2,2p6
Explanation:
electron arrangements
Two groups of students were given the same test. One group of students studied for 2 hours and the other group of students did not study at all. The group of students who studied achieved higher grades on the test. What is the DEPENDENT variable?
Answer:
Grade achieved is the dependent variable in the study.
Explanation:
A variable in any research or study is any property, characteristic, number, or a quantity which shows variability or change in its value i.e. it increases or decreases over time, depending on the treatment conditions.
There are two types of variables: Dependent variable and Independent variable.
An independent variable does not depent on any factor for its value or result, rather, a change units value brings about a change in the dependent variable.
A dependent variable is the variable which depends on some factor which the researcher controls. Any change made on the factor by the researcher would bring about a change on the dependent variable.
For example, in the given example above, studying habit affects academic performance. If a student studies more, his/her academic performance will improve as they will achieve higher grades. On the other hand, if a student fails to study, their academic performance will not show any improvement when compared to the group of students who studied. Thus, grade improvement depends on studying habit.
Therefore, grade obtained is the dependent variable in the study.
A gas occupies 4.21 Iiters at a pressure 1 074 atm. What will its volume be if the pressure is decreased to 0.46 atm?
Answer:
15.9 Liters
Explanation:
according to Boyle's law P1V1 = P2V2
so we just plug in the values the problem gives us and solve for V2
(1.74)(4.21)=(.46)(V2)
V2 = 15.9 Liters
*note - there is a typo in your question when you states P1 = 1 074 atm. I just assumed you meant 1.74, if this is a mistake just replace 1.74 with the real P1 and solve it as shown above
if you have any questions just comment them below
A mutation can cause which of the following in an organism?
1 Have no effect
2Be beneficial
3 Be harmful
6Causes a new trait
5 All of the above
Answer: 5 all of the above
Explanation:
A mutation can be a blessing or a curse. It can also have no effect on the person at all.
Hope this helps
What is the role of the producer in any food chain?
Question 1 options:
Producers turn light energy into food energy
Producers make the food that consumers eat
Without producers, consumers would starve
All of these answers are correct
Answer:
All of these answers are correct.
Explanation:
They are all correct because producers make their food(energy) through photosynthesis, they provide food to herbivores and therefore the rest of the food chain, and without them, the food chain would collapse and all the consumers would starve.
which organic compound has 4 carbon atoms with at least one triple bond?
Answer:
butene
Explanation:
Which refers to solid ice that condenses and forms on surfaces like grass or windows?
dew
frost
hail
sleet
Frost refers to solid ice that condenses and forms on surfaces like grass or windows.
WHAT IS FROST?Frost refers to a deposit of small white ice crystals formed on solid surfaces when the temperature falls below freezing temperature.
Frost forms when the temperature of the atmosphere is below freezing i.e. < 0°C.
Therefore, frost refers to solid ice that condenses and forms on surfaces like grass or windows.
Learn more about frost at: https://brainly.com/question/24843495
3. Svante Arrhenius developed a definition of acids and bases
which stated...
A. acids produce OH+ ions and bases produce H ions
B. acids produce H+ ions and bases produce OH ions
STAT
C. acids and bases are the same
D. acids have a high pH and bases have a low pH
pls help
btw any links will be reported.
Which is closer to the Sun—Neptune or the Earth?
O A.
The distance from the Earth to the Sun cannot be determined.
OB.
The Earth is closer to the Sun than Neptune is.
OC. They are the same distance from the Sun.
OD.
Neptune is closer to the Sun than the Earth is.
Answer: The earth is closer to the sun than neptune is
Explanation:
Answer:
The Earth is closer to the Sun than Neptune is.
Explanation:
pov
8. If 400 mL of gas has a temperature of 75°C, then what would be the new volume if the temperature increased to 95°C?
We are given:
V₁ = 400 mL T₁ = 75°c = (273+75)K = 348K
V₂ = x mL T₂ = 95°c = (273+95)K = 368K
Deriving Boyle's Law:
here, we can see that the volume and temperature are the only variables
from the ideal gas equation:
PV = nRT
T /V = P / nR
because P, n and R are constants, P/nR is a constant value
T / V = constant
which means that the initial and final ratio of P and T will be constant, hence:
T₁ / V₁ = T₂ / V₂, this is also known as the Charles' law. what I did above was it's derivation
Finding final volume:
plugging the given values:
348/400 = 368 / x
x = 368*400 / 348
x = 422.9 mL
beta-plus decay sodium protons and neutrons
Answer:
(β-decay) is a type of radioactive decay in which a beta particle (fast energetic electron or positron) is emitted from an atomic nucleus, transforming the original nuclide to an isobar of that nuclide. For example, beta decay of a neutron transforms it into a proton by the emission of an electron accompanied by an antineutrino; or, conversely a proton is converted into a neutron by the emission of a positron with a neutrino in so-called positron emission.
Explanation:
Answer:
Beta decay occurs when, in a nucleus with too many protons or too many neutrons, one of the protons or neutrons is transformed into the other. ... In beta plus decay, a proton decays into a neutron, a positron, and a neutrino: p Æ n + e+ +n.
Explanation:
Why is this conveyor important for Earth?
Answer:
.
Explanation:
Answer:
The great ocean conveyor plays a highly significant part in the climate of the planet. It transports heat to the Polar Regions, for example. In doing so, the amount of ice that can be formed in these regions is limited.
What mass of LiOH would need to be dissolved in water to make 300.0 mL of a solution with a pH of 11.33?
Execute Order 66________________
The mass of LiOH needed to make a 300 mL of a solution with a pH of 11.33 is 0.015 g
We'll begin by calculating the pOH of the solution.
pH = 11.33
pOH =?
pH + pOH = 14
11.33 + pOH = 14
Collect like terms
pOH = 14 – 11.33
pOH = 2.67 Next, we shall determine the concentration of hydroxide ion, OH⁻pOH = 2.67
Concentration of hydroxide ion [OH⁻] = ?pOH = –Log [OH⁻]
2.67 = –Log [OH⁻]
–2.67 = Log [OH⁻]
Take the as antilog of –2.67
[OH⁻] = antilog (–2.67)
[OH⁻] = 0.0021 MNext, we shall determine the concentration of LiOH.LiOH(aq) —> Li⁺(aq) + OH⁻(aq)
From the balanced equation above,
1 mole of LiOH contains 1 mole of OH⁻
Therefore,
0.0021 M LiOH will also contain 0.0021 M OH⁻.
Next, we shall determine the mole of LiOH in the solution.Molarity of LiOH = 0.0021 M
Volume = 300 mL = 300 / 1000 = 0.3 L
Mole of LiOH =?Mole = Molarity × volume
Mole of LiOH = 0.0021 × 0.3
Mole of LiOH = 0.00063 moleFinally, we shall determine the mass of LiOH needed to prepare the solution.Mole of LiOH = 0.00063 mole
Molar mass of LiOH = 7 + 16 + 1 = 24 g/mol
Mass of LiOH = ?Mass = mole × molar mass
Mass of LiOH = 0.00063 × 24
Mass of LiOH = 0.015 gTherefore, the mass of LiOH needed to prepare the solution is 0.015 g
Learn more: https://brainly.com/question/5851093
PLEASEEEE HELP :')
''If 5.6 mole of calcium metal is reacted, how many grams of calcium phosphide will form?'
Answer:
340 grams Ca₃P₂ (2 sig. figs.)
Explanation:
3Ca + 2P => Ca₃P₂
5.6 mole + excess => ? grams
Convert the 'known' to a coefficient of 1 by dividing all coefficients by 3.
=> Ca + 2/3P => 1/3Ca₃P₂
From the above, 1 mole of Ca => 1/3 mole Ca₃P₂
∴ 5.6 mole Ca in an excess of P => 1/3(5.6 mole) Ca₃P₂
=> 1.8666 mol Ca₃P₂ (calculator answer) ≅ 1.9 mol Ca₃P₂
=> 1.9 mole x 182 g Ca₃P₂/mol Ca₃P₂ = 339.73333 grams Ca₃P₂
≅ 340 grams Ca₃P₂ (2 sig. figs.)
Plz answer fast , (it’s a picture
Answer:
Explanation:
1.4193.61
2.1.69205e7
3.1.57611e14
4.46270.5
Define Acid and alkalis
Answer:
mark me brainliest
Explanation:
An acid is a substance that has a pH lower than 7. For example, hydrochloric acid, sulphuric acid, citric acid, ethanoic acid (vinegar). A base is a substance that neutralises an acid – those that dissolve in water are called alkalis. An alkali is a soluble substance with a pH higher than 7.
Answer:
The chemical which give hydrogen ion when dissolve in water is called acid.for example:HCL,HNO3,H2SO4 etc.
The bases that dissolve in water and produce hydroxyl ions are called alkalis.for example:NaOH,KOH etc.
Explanation:
What does the group number of an element tell you about the electrons?
Answer:
Explanation:
The group number of an element tells about the total number of electrons present in the valence shell or orbit of an atom.
A 50,000 g septic tank reading reports that methane gas bubbles are present with a concentration of 17 ppm
Answer:
[tex]m_{solute}=0.85g[/tex]
Explanation:
Hello there!
In this case, according to the given information for the parts per million of methane in this solution, it is possible for us to first write the equation for this unit of concentration as shown below:
[tex]ppm=\frac{m_{solute}}{m_{solvent}} *1x10^6[/tex]
In such a way, since the septic tank has a mass of 50,000 g, the mass of methane into it is calculated as shown below:
[tex]m_{solute}=\frac{ppm*m_{solvent}}{1x10^6}[/tex]
Now, we plug in the numbers to obtain:
[tex]m_{solute}=\frac{17*50000g}{1x10^6}\\\\m_{solute}=0.85g[/tex]
Regards!
copper oxide + hydrochloric acid →
Answer:
copper oxide + hydrochloric acid --> copper chloride + water
Explanation:
Thenks and mark me brainliest :))
Answer:
Copper oxide hydrochloric acid ( CuCl2 + H2O)
Explanation:
CuO + HCl → CuCl2 + H2O
how does gas create pressure?
a. the force of a collision between two gas molecules with the same amount of kinetic energy creates pressure
b. the force of a collision of a gas molecule against the walls of its container create pressure
c. the force of a collision between two gas molecules with different temperatures creates pressure
d. the force of a collision of a gas molecule against the air in a container creates pressure
Why do you think evolution is important?
Giving Bainliest!!!!!
In 2-3 sentences, describe the basic properties of waves including frequency, amplitude, wavelength, and speed.
Answer:
frequency: This is the number of oscillations in one second or number of complete wavelengths produced in one second.Amplitude: This is the maximum displacement of a particle from its mean position.Wavelength: This is the distance between one crest and another or one trough and another.Speed: This is the distance a wave travels in a given amount of time.What is a decay series?
a series of reactions that never ends
a different form of chemical bonding
a chain of decays that results in a stable nucleus
a series of chemical reactions that ends with a decay\
HELPPPPPP
Answer:
a chain of decays that result in a stable nucleus
Explanation:
Decay series is a series of decay in which radioactive element is decomposed in different elements until it produces one stable atom.
Answer:
C
Explanation:
took test Edg
1.00 mole of an ideal gas occupies a volume of 22.4 L at 0 C and 760 mmHg (STP). It is cooled to -41 C while the pressure is increased to 805 mmHg. What is the new volume of the gas in liters?
Answer:
[tex]V_2=18.0L[/tex]
Explanation:
Hello there!
In this case, according to the given information, we infer that we need the combined gas law in order to solve this problem:
[tex]\frac{P_2V_2}{T_2}} =\frac{P_1V_1}{T_1}}[/tex]
Thus, by suing the temperatures in Kelvins, we can solve for the final volume as shown below:
[tex]V_2 =\frac{P_1V_1T_2}{T_1P_2}}\\\\V_2 =\frac{(760mmHg)(22.4L)(232K)}{(273K)(805mmHg)} \\\\V_2=18.0L[/tex]
Regards!
What is the new pressure of 150 mL of a gas that is compressed to 50 mL when the original pressure was 3.0 ATM and the temperature is held constant
Answer:
[tex]\boxed {\boxed {\sf P_2= 9 \ atm}}[/tex]
Explanation:
Since the temperature is held constant, we only need to focus on the volume and pressure. We will use Boyle's Law, which states the volume of a gas is inversely proportional to the pressure. The formula is:
[tex]P_1V_1=P_2V_2[/tex]
Originally, the gas had a volume of 150 milliliters and a pressure of 3.0 atmospheres. We can substitute these values into the left side of the equation.
[tex]3.0 \ atm * 150 \ mL = P_2V_2[/tex]
The original gas was compressed to a volume of 50 milliliters, but we don't know the volume.
[tex]3.0 \ atm *150 \ mL= P_2 * 50 \ mL[/tex]
Now, we need to solve for the new pressure (P₂). Multiply on the left side first.
[tex]450 \ atm*mL= P_2 * 50 \ mL[/tex]
Since we are solving for the pressure, we need to isolate the variable. It is being multiplied by 50 mL. The inverse of multiplication is division. Divide both sides by 50 mL.
[tex]\frac{450 \ atm*mL}{50 \ mL}= \frac{P_2 * 50 \ mL}{50 \ mL}[/tex]
[tex]\frac{450 \ atm*mL}{50 \ mL}= P_2[/tex]
The units of milliliters will cancel.
[tex]\frac{450 \ atm}{50 }= P_2[/tex]
[tex]9 \ atm =P_2[/tex]
The new pressure is 9 atmospheres.
WILL GIVE BRANLIEST!!! Methane, CH4 is a __ (polar, nonpolar) molecule. In a molecule of methane, the primary intermolecular forces are ___ (London dispersion forces, dipole dipole forces, hydrogen forces, hydrogen bonding)
Answer:
Nonpolar; London dispersion forces
Explanation:
At what temperature will 2.50 moles of ideal
gas produce a pressure of 25.0 atm in a 10.0 L
container
Answer: 1,218K
Explanation:
calculate the atomic mass of gallium if gallium has two naturally occurring isotopes with the following massess and natural abundances Ga-69 68.9256 amu 60.11% Ga-71 70.9247 amu 39.89
Answer: Atomic mass of gallium = 69.72304093 amu
Explanation:
We calculate the atomic mass of Gallium by using the Relative abundance of the isotopes.
Atomic mass =mass x Natural Abundance of Isotope 1 +mass x Natural Abundance of Isotope 2
(60.11/100 x 68.9256) + (39.89/100 x 70.9247)
= 41.43117816 + 28.29186283 = 69.72304093 amu
What is the oil refining process?
Answer:
"the chemical engineering processes and other facilities used in petroleum refineries to transform crude oil into useful products such as liquefied petroleum gas, gasoline or petrol, kerosene, jet fuel, diesel oil and fuel oils"
-wikipedia
Explanation:
[tex]\huge{\textbf{\textsf{{\color{pink}{An}}{\red{sw}}{\orange{er}} {\color{yellow}{:}}}}}[/tex]
An oil refinery or petroleum refinery is an industrial process plant where crude oil is transformed and refined into useful products such as petroleum naphtha, gasoline, diesel fuel, asphalt base, heating oil, kerosene, liquefied petroleum gas, jet fuel and fuel oils.
Thanks Hope it helps.In your OWN words, what is the difference between a solute, solvent and solution?
Answer:
could u all help me??
Who was Agamemnon trying to persuade to come fight with him again?
Patroclus
Achilles
Odysseus
Hector
Explanation: