Answer:
Follows are the soplution to this question:
Explanation:
In the given scenario it would be like a fluid in a simple harmonic in contact with the earth. Whenever a cheetah hops quicker, oscillatory amplitude rises, while the duration stays the same since it does not depend on frequency, which mostly means that time will be the same if you're in contact with the substrate.
Explain how a current is induced in the wire?
Answer:
If a coil of wire is placed in a changing magnetic field, a current will be induced in the wire. This current flows because something is producing an electric field that forces the charges around the wire. (It cannot be the magnetic force since the charges are not initially moving). ... that determines the induced current.
Three charges lie along the x-axis. One positive charge, q1 = 4.80*10^-18 C, is at x = 3.72 m, and another positive charge, q2 = 1.60*10^-19 C, is at the origin.
At what point on the x-axis must a negative charge, q3, be placed so that the resultant force on it is zero?
Answer:
The third charge needs to be placed at [tex]x \approx 0.57\; \rm m[/tex].
Explanation:
Both [tex]q_1[/tex] and [tex]q_2[/tex] would attract [tex]q_3[/tex].
These two electrostatic attractions need to balance one another. Hence, they need to be opposite to one another. Therefore, [tex]q_1[/tex] and [tex]q_2[/tex] need to be on opposite sides of [tex]q_3[/tex]. That is possible only if [tex]q_3 \![/tex] is on the line segment between [tex]q_1 \![/tex] and [tex]q_2 \![/tex].
Assume that [tex]q_3[/tex] is at [tex]x\; \rm m[/tex], where [tex]0 < x < 3.72[/tex] (in other words, [tex]q_3 \![/tex] is on the line segment between [tex]q_1[/tex] and [tex]q_2[/tex], and is [tex]x\; \rm m \![/tex] away from [tex]q_2 \![/tex].)
Let [tex]k[/tex] denote Coulomb's constant.
The magnitude of the electrostatic attraction between [tex]q_1[/tex] and [tex]q_3[/tex] would be:
[tex]\displaystyle \frac{k\cdot q_1 \cdot q_3}{(3.72 - x)^{2}}[/tex].
Similarly, the magnitude of the electrostatic attraction between [tex]q_2[/tex] and [tex]q_3[/tex] would be:
[tex]\displaystyle \frac{k\cdot q_2 \cdot q_3}{x^{2}}[/tex].
The magnitudes of these two electrostatic attractions need to be equal to one another for the resultant electrostatic force on [tex]q_3[/tex] to be [tex]0[/tex]. Equate these two expressions and solve for [tex]x[/tex]:
[tex]\displaystyle \frac{k\cdot q_1 \cdot q_3}{(3.72 - x)^{2}} = \frac{k\cdot q_2 \cdot q_3}{x^{2}}[/tex].
[tex]\displaystyle \frac{q_1}{(3.72 - x)^{2}} = \frac{q_2}{x^{2}}[/tex].
[tex]\displaystyle \frac{x^2}{(3.72 - x)^{2}} = \frac{q_2}{q_1}[/tex].
[tex]\displaystyle \frac{x^2}{(3.72 - x)^{2}} = \frac{q_2}{q_1} = \frac{1}{30}[/tex].
By the assumption that [tex](0 < x < 3.72)[/tex], it should be true that [tex](x > 0)[/tex] and [tex](3.72 - x > 0)[/tex]. Therefore, [tex]\displaystyle \frac{x}{(3.72 - x)} > 0[/tex].
Take the square root of both sides of the equation [tex]\displaystyle \frac{x^2}{(3.72 - x)^{2}} = \frac{1}{30}[/tex].
[tex]\displaystyle \sqrt{\frac{x^2}{(3.72 - x)^{2}}} = \sqrt{\frac{1}{30}}[/tex].
[tex]\displaystyle \frac{x}{3.72 - x} = \frac{1}{\sqrt{30}}[/tex].
[tex]\sqrt{30}\, x = 3.72 - x[/tex].
Therefore:
[tex]\left(1 + \sqrt{30}\right)\, x = 3.72[/tex].
[tex]\displaystyle x = \frac{3.72}{1 + \sqrt{30}} \approx 0.57[/tex].
Hence, [tex]q_3[/tex] should be placed at [tex]x \approx 0.57\; \rm m[/tex].
Which of the following is an example of an electromagnetic wave ?
Answer:
Its a wave
Explanation:
THis is one
Answer: a light wave
Explanation: a pex
HELP PLZZZ
Which optical devices can form images that are larger than the original
object?
Answer: B- A and C
Explanation:
A P E X
The optical devices uses light. The correct option for the optical devices can form images that are larger than the original object is B i.e A and C.
What is optical device?The device which uses light for the meaningful purpose is called optical devices.
The device which form the images larger than the object are the converging type of lens or mirror.
The lens which is converging is the convex lens denoted by C in diagram and the converging mirror is the concave mirror denoted by A.
Therefore, the correct option for the optical devices can form images that are larger than the original object is B i.e A and C.
Learn more about optical devices.
https://brainly.com/question/11860215
#SPJ2
A medication given to treat ventricular
tachycardia and ventricular fibrillation
Answer:
Amiodarone
Explanation:
Charges of +5C and −9C are at a distance of 1m from each other. Which diagram represents the force between the two charges?
Answer: Well the charges in 9c are positive so 5c is th force between the two making the ansewr
Explanation:
Answer:
C (3RD OPTION)
Explanation:
E2020
Think of a technology or appliance that you use regularly. Identify the transfers and transformations of energy necessary to operate the technology. Explain your answer
PLZZ
Answer:
Energy conversion
Explanation:
We regularly use automobile which runs on the chemical energy of the fuels such as diesel and petrol, the chemical energy from the fuel would convert into the thermal energy which is used to drive the engine of the vehicle,further the thermal energy converted into the mechanical energy which is used to drive the prime mover of the automobile.
What is thermal energy?It can be defined as the form of the energy in which heat is transferred from one body to another body due to their molecular movements, thermal energy is also known as heat energy.
We frequently utilize vehicles that operate on chemical energy from fuels like diesel and gasoline.
This chemical energy is transformed into thermal energy, which drives the engine of the vehicle, and then mechanical energy, which drives the prime mover of the vehicle.
Thus, we can say that the transfers and transformations of energy are necessary to operate the technology.
Learn more about thermal energy from here, refer to the link;
brainly.com/question/3022807
#SPJ2
A room is 5.0 m long, 4.0 m wide, and 3.0 m high. What is the mass of the air it contains?
Answer:
Here u go
Explanation:
Mass of air in the room m= volume of room×density of air
=(5m×4m×3m)(1.20kgm3)=72kg
Weight of air, W=mg=(72kg)(9.8ms2)=706N.
Answer:
person above is correct, i did the work and got the smae answer
30 PTS NEED THIS FAST
Answer:
the one made from aluminum
Explanation:
For which angle of projection range of projectile is maximum
(a) 40°
(b) 35°
(e) 43°
(d) 48°
Answer:
the correct answer is e
Explanation:
In projectile launching, the range or distance on the x-axis is given by the expression
R = [tex]\frac{v_o^2 \ sin 2 \theta }{g}[/tex]
where v₀ is the initial velocity θ the launch angle.
When analyzing this expression is maximum when the sine function is maximum
sin 2 θ = 1
2θ = sin⁻¹ 1
2 θ = 90
θ = 90/2
θ = 45º
reviewing the answers there are no correct ones since the maximum angle occurs for 45º
if we analyze with these angles we have
θ = 40
sin 2θ = sin 2 40 = 0.98
θ = 35
sin 2 35 = 0.939
θ = 43
sin 2 43 = 0.998
θ = 48
sin 2 48 = 0.994
if we take the written angles the range is maximum for 43º
therefore the correct answer is e
fast need answers
Find the amount of force if the body has pressure of 178 Pa on 18 mm²
Answer:
Force = 3.204Newton
Explanation:
Given the following data;
Pressure = 178
Area = 18 mm² to meter = 18/1000 = 0.018 m²
To find the force;
Force = pressure * area
Force = 178 * 0.018
Force = 3.204 Newton.
a dogs tail hit a 1.3kg flower vase, knocking it over. the net force on the flower vase over time is shown below
what is the bases speed at t=20 ms?
round answer to two significant figures
note that time is in ms.
Answer: 0.15 m/s
Explanation:
Which image shows an example of the strong nuclear force in action?
i think this is the incomplete page that you are showing but the answer is
:-
BTo increase an impulse:
A. increase the change in momentum.
B. decrease the change in velocity.
C. increase the distance.
D. decrease the mass.
A worker drives a .500kg spike into a rail tie with a 2.50kg sledgehammer. The hammer hits the spike with a speed of 65.0 m/s. If one-third of the hammer's kenetic energy is converted to the internal energy of the hammer and spike, how much does the total internal energy increase?
Answer:
The increase internal energy is 1,760.41[tex]\overline 6[/tex] J
Explanation:
The given parameters of the worker, sledgehammer, and rail line are;
The mass of the spike driven into the rail, m₁ = 0.500 kg
The mass of the sledgehammer, m₂ = 2.50 kg
The speed of the sledgehammer, v = 65.0 m/s
The fraction of the hammers kinetic energy, KE, converted to the internal energy of the hammer and the spike, Δ[tex]E_{internal}[/tex] = 1/3 × KE
Therefore, we have;
The kinetic energy, KE, of the sledgehammer is given by KE = 1/2·m₂·v²
Where;
m₂ = The mass of the sledge hammer = 65.0 m/s
v = The velocity o the sledgehammer
∴ KE = 1/2 × 2.50 kg × (65.0 m/s)² = 5,281.25 J
Therefore;
The increase internal energy, Δ[tex]E_{internal}[/tex] = 1/3 × 5,281.25 J = 1760.41[tex]\overline 6[/tex] J
You come out of a shopping mall one night and look at your car. Your car is painted blue, and the light illuminating the car is yellow. What color does your car appear to you in the yellow light?
what are three assumptions of the kinetic molecular theory
What exactly occurs at the alveoli? Explain using blood vessels, diffusion, oxygen, and carbon dioxide in your answer (2-3 sentences)
Answer:
Gas exchange takes place in the millions of alveoli in the lungs and the capillaries that envelop them. Inhaled oxygen moves from the alveoli to the blood in the capillaries, and carbon dioxide moves from the blood in the capillaries to the air in the alveoli.
Explanation:
Hope this helps :)
A long board is free to slide on a sheet of frictionless ice. As shown in the top view in the diagram, a skater skates to the board and hops onto one end, causing the board to slide and rotate. In this situation, which of the following occurs? Select two answers.
Answer:
A) rational kinetic energy is conserved
For the scenario painted below Rational kinetic energy is conserved
Option A is correct
What is Rational kinetic energy?Kinetic energy is simply defined as the energy that an item or particle has as a result of its movement.
In conclusion, For A longboard is free to slide on a sheet of frictionless ice. and a skater skates to the board and hops onto one end, causing the board to slide and rotate. In this situation Rational kinetic energy is conserved
Read more about Kinetic energy
https://brainly.com/question/999862
what does "no reference to direction of motion mean"?
Explanation:
its means the quantity in question is a scalar quantity, has only magnitude but no direction, for example. speed,has no reference to direction of motion, since the speed of a body say 5 m/s( the direction of the body has not been stated) but the velocity of a body say 5m/s to the east has a reference to direction of the motion.
That's why velocity is different from speed
When a wool cloth is rubbed on the surface of a balloon, it tends to give away electrons causing the surface of the balloon to become :
positively charged
negativity charged
neutrally charged
Answer:
It is negativity charged
Answer:
positively charged
Explanation:
a wool has neutral charges hence when rubbed against a balloon it will generate positive charges
The speed of the 2 kg cart after 5 seconds is ? cm/s.
Why does eating less meat conserve more water than just eating plants?
Answer:
Studies show that eating fewer animal-based products could reduce water use since animal production uses more water than crops do. In addition, reducing the amount of food that's lost or wasted at various points in the food supply chain could feed about 1 billion extra people while simultaneously reducing water use.
A guitar string vibrates 600 times in 2 seconds.
Find its frequency and time period.
Steps Required.
frequency is equal to number of oscillations or vibrations upon time
therefore,
check picture
Who created the periodic table
Answer:
Dimitri Mendeleev
In 1869 Russian chemist Dimitri Mendeleev started the development of the periodic table, arranging chemical elements by atomic mass. He predicted the discovery of other elements, and left spaces open in his periodic table for them.
Carlos uses a rope to pull his car 30 m to a parking lot because it ran out of gas. If Carlos exerts 2,000 N of force to pull the rope, and the rope is at an angle of 15° to the road, how much work did he do? Round your answer to two significant figures.
1.6 × 104 J
3.5 × 104 J
5.8 × 104 J
9.0 × 104 J
Answer:
Explanation:
Remark
The only thing that might trip you up is what to do with the angle. The vertical component of the 15 degrees does no work against anything. So the 15 degrees limits the horizontal force.
The formula is
Work = F * d * cos(15)
The givens are
F = 2000 N
d = 30 m
Cos(15) = 0.9659
Solution
Work = 2000 * 30 * cos(15)
Work = 57,955
Rounded to two places would be 5.8 * 10^4
C
a ball rolls from rest down an incline with a uniform acceleration of 4m/s². what is it speed after 8 seconds
1.
Two children sit on a uniform seesaw such that a 400. N child is 2.0 m from the support. How
far from the center should the second child of weight 475 N sit in order to balance the system
if the support is at the center of the plank?
Answer:
The other child must sit the same meters as the N child so they an be balanced.
Explanation:
Solar energy heats the surface of the Earth, including the ground, rocks, and even roadways. As the temperature of these surfaces increases, heat energy is released back into the atmosphere, forming a pocket of warm air. As the warm air pocket rises, it is replaced by cooler air. This process is responsible for many of the weather patterns in our atmosphere and is known as
Answer:
convection
Explanation:
I hope this helps
A car of mass 800 kg goes round a corner of radius 65 m at a
speed of 10 m/s
b) Suggest how this force is likely to be obtained.
Answer:
Centrifugal force = 1230.77 Newton.
Explanation:
The force associated with the car is generally referred to as centrifugal force and it can be calculated using the formula;
Centrifugal force = mv²/r
Given the following data;
Mass = 800kg
Radius = 65m
Velocity = 10m/s
To find the force;
Centrifugal force = (800*10²)/65
Centrifugal force = (800*100)/65
Centrifugal force = 80000/65
Centrifugal force = 1230.77 Newton.