m_c (mass of cylinder)=50 kg
d=25 cm so r=12.5 cm = 0.125 m m_b
(mass of bucket)=20 kg
So using the equations: RT = � = I � RT= I � (m_b)g-T= (m_b)aR And from what I understand, this is the same as the tangential acceleration? (m_b)g-T=(m_b) � r = F T= ( i � ) / r (m_b)g -(( i � ) / r ) = m � r � ( ((m_b)r) + (I /R ) ) = (m_b)g Leaving us with the final : � = ((m_b)g)/(((m_b)r) + (I /r)) Using this equation, I found I = 0.390625 and the final answer would be 35 rad/s^2 Sorry for such a long post--this is my first time on the website and I read the rules so hopefully I've done everything correctly! Thank you all!
/
at what velocity (in revolutions per minute) will the peak voltage of a generator be 475 v, if its 475 turn, 8.00 cm diameter coil rotates in a 0.250 t field?
The velocity at which the peak voltage of the generator is 475 V is 95.0 revolutions per minute.
The peak voltage (V) of a generator is given by the equation V = NBAω, where N is the number of turns in the coil, B is the magnetic field strength, A is the area of the coil, and ω is the angular velocity of the coil.
We are given that the coil has 475 turns, a diameter of 8.00 cm, and rotates in a 0.250 T field. We can use these values to find the area of the coil:
radius = diameter/2 = 4.00 cm
[tex]area = π(radius)^2 = 50.27 cm^2[/tex]
Now we can solve for ω:
V = NBAω
[tex]ω = V/(NBA) = (475 V)/(475 turns)(0.250 T)(50.27 cm^2)(1 m^2/10,000 cm^2)(1 rev/2π radians)[/tex]
ω = 95.0 rev/min
Therefore, the velocity at which the peak voltage of the generator is 475 V is 95.0 revolutions per minute.
Learn more about The velocity
https://brainly.com/question/17127206
#SPJ4
1260 RPM. RPM = (Peak Voltage / (2 * pi * coil diameter * magnetic field strength)) * 60 can be used to compute this.
The formula Vp = NABw/2, where N is the number of turns in the coil, A is the coil's area, B is the strength of the magnetic field, and w is the coil's angular velocity, determines the peak voltage produced by a revolving coil. We arrive at w = 2Vp/(NAB) after solving for w. Since the coil diameter rather than the area is provided, we can apply the calculation A = pi*d2/4 to determine the area. After simplifying and substituting the given variables, we get at w = 2 * 475 / (475 * pi * 0.082 * 0.25) = 420 rad/s. Finally, we increase this by 60 / (2 * pi), which gives us 1260 RPM.
learn more about coil here:
https://brainly.com/question/27961451
#SPJ11
a student designed a pump cycle, in which 200 kj of heat removed from a reservoir at a temperature of 240 kelvin is rejected into another reservoir at a temperature of 400 k. the heat pump requires 100 kj of work. is the designated heat pump cycle reversible?
No, the heat pump cycle is not reversible.
The reversible process is an ideal process in which no energy is lost to the surroundings, and the system returns to its initial state when the process is reversed. In the given pump cycle, heat is transferred from a low-temperature reservoir to a high-temperature reservoir with the help of work input.
This process violates the second law of thermodynamics, which states that heat cannot flow spontaneously from a cold body to a hot body without any external work input. Therefore, the given pump cycle cannot be reversible.
Additionally, the efficiency of a reversible cycle is always greater than the efficiency of an irreversible cycle. In this case, the efficiency of the heat pump cycle can be calculated using the equation:
efficiency = (heat transferred - work input) / heat transferredSubstituting the given values, we get:
efficiency = (200 - 100) / 200 = 0.5 or 50%This efficiency is less than the maximum theoretical efficiency that a reversible cycle could achieve. Therefore, the pump cycle is irreversible.
To learn more about heat pump cycle, here
https://brainly.com/question/12937347
#SPJ4
if hydrogen is the most common element in the universe, why do we not see the lines of hydrogen in the spectra of the hottest stars?
The reason we do not see the lines of hydrogen in the spectra of the hottest stars is due to the ionization of hydrogen atoms at high temperatures.
In these stars, the temperatures are so high that the electrons in the hydrogen atoms are stripped away, leaving behind only the protons. This ionized hydrogen does not produce the same spectral lines as neutral hydrogen, which is what we typically observe in cooler stars. Instead, the spectra of hot stars are dominated by lines from ionized metals, such as helium, carbon, and oxygen. So while hydrogen is indeed the most common element in the universe, its presence in the spectra of hot stars is not as prominent due to ionization.
More on hydrogen: https://brainly.com/question/30077093
#SPJ11
Humerus
Sholder
Joint
2. What side of the chicken's body did this wing belong to? Why?
The upper limb is the side of the chicken's body did this wing belong to.
Where is the shoulder joint in a chicken?Humerus, shoulder, and joint are related to the anatomy of the upper limb. The humerus is the long bone in the upper arm, the shoulder is the joint that connects the arm to the body, and the joint refers to the articulation between bones.
In a chicken, the shoulder joint is located at the junction of the humerus (upper arm bone) and the scapula (shoulder blade). It is a ball-and-socket joint that allows for a wide range of motion in the chicken's wing. The shoulder joint is important for a chicken's ability to fly, flap its wings, and perform other movements that require mobility and stability in the upper limb.
Read more on upper limb here:https://brainly.com/question/6963710
#SPJ1
In Young's experiment, light from a red laser (wavelength 700 nm) is sent through two
slit. At the same time, monochromatic visible light with another wavelength passes through the same
apparatus. As a result, most of the pattern that appears on the screen is a mixture of two colors; however, the
center of the third bright fringe of the red light appears pure red. What are the possible wavelengths of the
second type of visible light?
In Young's experiment, the pattern that appears on the screen is a result of interference between two sets of waves that are diffracted through two slits.
The location of the bright fringes in the pattern depends on the wavelength of the light used. This means that the path difference between the waves that interfere to produce this fringe is an integer multiple of the red light's wavelength (700 nm).
ΔL = mλ_red = nλ_other
where ΔL is the path difference between the waves, m and n are integers, λ_red is the wavelength of the red light, and λ_other is the wavelength of the second type of visible light.
Solving for λ_other, we get:
λ_other = (m/n) λ_red.
To know more about Young's experiment, here
brainly.com/question/30452257
#SPJ4
a hair drier uses 8 a at 114 v. it is used with a transformer in england, where the line voltage is 237 v. what should be the ratio of the turns of the transformer (primary to secondary)?
To determine the ratio of turns of the transformer, we can use the principle of conservation of power, which states that power in equals power out in an ideal transformer.
The power input to the hair dryer is:
P = VI = (8 A)(114 V) = 912 W
The power output of the transformer should be the same as the input power, so we can use this equation to find the current in the secondary circuit:
P = VI = (I_s)(237 V)
where I_s is the current in the secondary circuit. Solving for I_s, we get:
I_s = P/V_s = (912 W)/(237 V) = 3.85 A
Now we can use the turns ratio equation to find the ratio of the turns in the transformer:
N_p/N_s = V_p/V_s = (114 V)/(237 V)
where N_p and N_s are the number of turns in the primary and secondary coils, respectively. Solving for N_p/N_s, we get:
N_p/N_s = 0.481
Therefore, the ratio of turns in the transformer should be approximately 0.481.
To know more about conservation of power :
https://brainly.com/question/9013890
#SPJ11
A client reports general malaise and has a temperature is 103.8°F (39.9°C). What is the rationale for administering a prescribed aspirin, an antipyretic, to this client?
Antipyretics protect vulnerable organs, such as the brain, from extreme temperature elevation.
Temperatures in excess of 99.5°F (37.5°C) can result in seizure activity.
Lower temperatures inhibit the protein synthesis of bacteria.
Most antipyretics have been shown to have little effect on core temperature but alleviate discomforts.
A client reports general malaise and has a temperature is 103.8°F (39.9°C). What is the rationale for administering a prescribed aspirin, an antipyretic, to this client
step-by-step explanation:
Step 1: A client reports general malaise and has a temperature of 103.8°F (39.9°C).
Step 2: The high temperature is an indication that the body is fighting an infection or inflammation.
Step 3: Antipyretics, such as aspirin, work by blocking the production of certain chemicals in the body that cause fever.
Step 4: Lowering the body temperature can help alleviate the discomfort associated with fever and reduce the risk of complications, such as seizures or dehydration.
Step 5: Aspirin is a commonly prescribed antipyretic that can be effective in reducing fever.
Step 6: The rationale for administering a prescribed aspirin, an antipyretic, to this client is to lower the body temperature and alleviate the discomfort associated with fever.
Step 7: It is important to follow the prescribed dosage and instructions for aspirin to avoid potential side effects or interactions with other medications.
Step 8: If the fever persists or worsens, it is important to seek medical attention to determine the underlying cause and ensure appropriate treatment.
To know more about Antipyretics :
https://brainly.com/question/30758739
#SPJ11
A nurse is caring for a client who is in labor and has an epidural anesthesia block. The client's blood pressure is 80/40 mmHg and the fetal heart rate is 140/min. Which of the followign is the priority nursing action?
A. Elevate the client's legs.
B. Monitor vital signs every 5 min.
C. Notify the provider.
D. Place the client in a lateral position.
The priority nursing action in this scenario would be to notify the provider.
An epidural anesthesia block can cause a drop in blood pressure in the mother, which can in turn affect the fetal heart rate.
A blood pressure reading of 80/40 mmHg is considered low, and can indicate hypotension.
Hypotension can lead to decreased blood flow to the placenta and fetus, which can result in fetal distress.
Therefore, it is important for the provider to be notified of the low blood pressure reading and fetal heart rate, so that appropriate interventions can be implemented to address the situation.
The provider may choose to adjust the dosage of the epidural anesthesia, administer IV fluids, or consider other measures to stabilize the mother's blood pressure and fetal well-being.
While monitoring vital signs and positioning the client can also be important interventions, they are not the priority in this scenario.
Elevating the client's legs may help to increase blood flow to the heart and improve blood pressure, and placing the client in a lateral position may also help to improve blood flow and prevent supine hypotensive syndrome.
These actions should be taken after the provider has been notified and appropriate interventions have been implemented.
To know more about epidural anesthesia visit link :
https://brainly.com/question/14205576
#SPJ11
which particles have positive charges, and which have negative charges? sort the particles into positive and negative charged.
Protons have a positive charge, neutrons have no charge, and electrons have a negative charge.
The three fundamental particles in an atom are protons, neutrons, and electrons. Protons have a positive charge and are located in the nucleus of the atom, along with neutrons, which have no charge. Electrons have a negative charge and orbit the nucleus. The number of protons in an atom determines its atomic number, which in turn determines the element to which it belongs.
The number of electrons in an atom determines its chemical properties, as they are involved in chemical bonding with other atoms. The charges of the particles are important in determining the behavior of atoms in chemical reactions and in the formation of molecules and compounds.
To know more about charge, here
brainly.com/question/3412043
#SPJ4
--The complete question is, Which fundamental particles have positive charges, and which have negative charges?--
an object with mass m is released from rest at distance r0 from earth's center and falls on the earth's surface. what is the velocity of the object when it hits the earth's surface?
The velocity of the object when it hits the Earth's surface depends only on the height from which it was dropped and the acceleration due to gravity.
The velocity of an object when it hits the Earth's surface can be calculated using the principle of conservation of energy. When the object is released from rest at a distance r0 from the Earth's center, it has an initial gravitational potential energy of mgh0, where g is the acceleration due to gravity and h0 is the height of the object above the Earth's surface.
As the object falls towards the Earth's surface, its potential energy is converted into kinetic energy. When it hits the Earth's surface, all of its potential energy has been converted into kinetic energy. Therefore, we can write:
[tex]mgh0 = (1/2)mv^2[/tex]
where v is the velocity of the object when it hits the Earth's surface.
Solving for v, we get:
v = sqrt(2gh0)
Learn more about The velocity
https://brainly.com/question/17127206
#SPJ4
consider the picture above of mars's orbit around the sun. which spot shows where mars will be when we see it in retrograde motion on earth?
When retrograde motion occurs and how it is related to Mars's orbit around the Sun:
Retrograde motion occurs when a planet appears to move backward in the sky from Earth's perspective. In the case of Mars, this happens when Earth overtakes Mars in their respective orbits around the Sun.
To understand when Mars will be in retrograde motion, consider these steps:
1. Picture both Mars and Earth orbiting the Sun, with Mars having a larger, slower orbit due to its greater distance from the Sun.
2. As Earth moves faster in its orbit, it eventually catches up to and passes Mars.
3. During this time, the relative positions of Earth, Mars, and the Sun create the illusion of Mars moving backward in the sky, as seen from Earth.
So, when trying to identify the spot where Mars will be in retrograde motion, look for the point in its orbit where Earth is passing Mars, creating the optical illusion of Mars moving backward in the sky.
To know more about Retrograde motion:
https://brainly.com/question/31026528
#SPJ11
A mass of 25. 0 kg is acted upon by two forces: is 15. 0 n due east and is 10. 0 n and due north. The acceleration of the mass is
the acceleration of the mass is 0.7212 m/s^2.
To find the acceleration of the mass, we need to first determine the net force acting on it. We can do this by using vector addition to add the two forces together.
Using the Pythagorean theorem, we can find the magnitude of the diagonal force:
sqrt[[tex](15N)^{2}[/tex] + [tex](10N)^{2}[/tex]] = sqrt[225 + 100] = sqrt(325) = 18.03 N
The direction of this force can be found using the inverse tangent function:
theta =[tex]tan^{-1}(10.0N/15.0N)[/tex] = 33.69 degrees north of east
We can now use vector addition to find the net force on the mass:
F_net = sqrt[[tex](15N)^{2}[/tex] + [tex](10N)^{2}[/tex]] = 18.03 N, at an angle of 33.69 degrees north of east
To find the acceleration of the mass, we can use Newton's second law, which states that the net force acting on an object is equal to its mass times its acceleration:
F_net = ma
Solving for the acceleration, we get:
a = F_net / m = 18.03 N / 25.0 kg = 0.7212 m/s^2
Therefore, the acceleration of the mass is 0.7212 m/s^2.
Learn more about Vector Addition:
https://brainly.com/question/19420810
as per subpart b, a physician who is a member of the research team on a study involving nonviable neonates may assist the treating physicians in determining whether neonates are nonviable. True or false?
True a significant factor in algal blooms and the excessive growth of aquatic vegetation that results in competition for sunlight and congestion.
What exactly is a contest?Job competition is fierce. Computer firms compete fiercely with one another. The two businesses are in opposition to one another.It can also be described more broadly as the either direct or indirect relationship between species that affects fitness when they share a resource.When there is monopolistic competition, several vendors offer differentiated goods—goods with minor differences but similar functions.
An organism is what?Therefore, every animal, plant, mould, protist, organism, or archaeon found on Earth would be considered an organism. There are numerous methods to categorise these species.a single organism that uses its organs to carry out its life's functions
To know more about organism visit:
https://brainly.com/question/13278945
#SPJ1
how can sonar best be used to monitor the hydrosphere
Sonar can be a useful tool for monitoring the hydrosphere, which includes all of the water on and beneath the Earth's surface.
Sonar works by emitting sound waves that bounce off objects in the water, and then measuring the time it takes for the sound waves to return to the source. By analyzing the echoes, scientists can map the seafloor, measure the depth of the water, and even identify the size and location of marine organisms.
Sonar can also be used to monitor the movements of water masses, including ocean currents, tides, and storm surges. This information is important for understanding global climate patterns and predicting the effects of natural disasters
Learn more about global climate
https://brainly.com/question/27919422
#SPJ4
10. A roller coaster accelerates at 8.75 m/s² from rest to a final velocity of 70 m/s. How long does it
take to speed up?
A roller coaster accelerates at 8.75 m/s² from rest to a final velocity of 70 m/s it takes 8 sec to speed up.
How to calculate time?Using the equation v = u + at, we can find:70 m/s for final velocityThe roller coaster starts at rest, therefore u = starting velocity = 0 m/s.8.75 m/s2 for acceleration and time, respectivelyWhen we solve for t, we obtain:t = (v - u) / at = (70 m/s - 0 m/s) / 8.75 m/s2 t = 8 sec.In light of this, the roller coaster's acceleration takes 8 seconds.The rate of change in an object's velocity with respect to time is known as acceleration in mechanics. The vector quantity of accelerations. The direction of the net force that is acting on an object determines its acceleration.For more information on time of roller coaster kindly visit to
https://brainly.com/question/18002471
#SPJ1
5 of 225 of 22 Items
12:41
Question
The basic concept of how a simple motor works is explained by which statement?
Answer:
The basic concept of how a simple motor works is that you put electricity into it at one end and an axle (metal rod) rotates at the other end giving you the power to drive a machine of some kind. The simple motors you see explained in science books are based on a piece of wire bent into a rectangular loop, which is suspended between the poles of a magnet. In order for a motor to run on AC, it requires two winding magnets that don’t touch. They move the motor through a phenomenon known as induction.
I hope this helps! Let me know if I'm wrong!
Explanation:
starting from rest, a disk rotates about its central axis with constant angular acceleration. in 5.0 s, it rotates 50 rad. what is the instantaneous angular velocity of the disk at the end of the 20.0 s?
The instantaneous angular velocity is 20.0 s is 400 rad/s.
What is the final instantaneous angular velocity of a disk rotating about its central axis with constant angular acceleration?Since the angular acceleration is constant, we can use the formula:
[tex]θ = 1/2 * α * t^2 + ω0 * t[/tex]
where
[tex]θ = angle rotated = 50 rad[/tex]
[tex]α = angular acceleration[/tex]
[tex]t = time = 5.0 s[/tex]
[tex]ω0 = initial angular velocity = 0 (starting from rest)[/tex]
Solving for α, we get:
[tex]α = 2 * (θ - ω0 * t) / t^2 = 2 * 50 rad / 5.0 s^2 = 20 rad/s^2[/tex]
Now, using the formula:
[tex]ω = α * t + ω0[/tex]
where
ω = instantaneous angular velocity at the end of 20.0 s (what we need to find)
[tex]α = angular acceleration = 20 rad/s^2[/tex]
[tex]t = time = 20.0 s[/tex]
[tex]ω0 = initial angular velocity = 0 (starting from rest)[/tex]
we get:
[tex]ω = 20 rad/s^2 * 20.0 s + 0 = 400 rad/s[/tex]
Therefore, the instantaneous angular velocity of the disk at the end of 20.0 s is 400 rad/s.
Learn more about angular acceleration
brainly.com/question/29428475
#SPJ11
13. what type of lens is used to make a magnifying glass? a) converging b) diverging c) either type would work equally well.
Option (a).
A converging lens is used to make a magnifying glass, which works by bending light to create a magnified image.
The curved surface of the lens helps to focus and magnify the object being viewed.
Learn more about lens https://brainly.com/question/15123066
#SPJ11
A train car with a mass of 2000 kg is traveling east at 10 m/s. It is approaching another train car with a mass of 1000 kg also traveling east at 3 m/s. After the trains collide, the more massive train car continues east at 6 m/s. What is the new velocity of the less massive train car?
The new velocity of the less massive train car has a velocity of 10 m/s after the collision.
What is velocity?Velocity is a measure of the rate and direction of an object's motion. It is a vector quantity, meaning it has both magnitude and direction. Velocity is typically represented by the equation v = s/t, where v is the velocity, s is the displacement (or distance travelled), and t is the time taken. Velocity is often confused with speed, which is the measure of the magnitude of an object's motion. Speed is a scalar quantity and is represented by the equation s = t/v.
The total momentum of the two train cars before the collision is calculated by multiplying the mass of each car by its velocity.
The total momentum of the system before the collision is 2000 kg x 10 m/s + 1000 kg x 3 m/s = 23000 kg m/s.
The total momentum of the system after the collision is 2000 kg x 6 m/s + 1000 kg x v, where v is the velocity of the less massive train car after the collision.
Therefore, we can set up the equation 23000 = 12000 + 1000v and solve for v.
v = 10 m/s.
To learn more about velocity
https://brainly.com/question/24445340
#SPJ1
What does it mean when we say our sense of motion depends on our frame of reference? Include the phrases “fixed frame” and “moving frame” in your answer.
frame of reference that is not inertial. A non-inertial frame is now defined as a frame that accelerates relative to the underlying inertial reference frame. Newton's law won't be valid.
How does the framework function?
Performance could change depending on the lighting. The Frame automatically modifies the Plasma tvs brightness and contrasting settings after analyzing the lighting conditions in the room and the light level of your content.
What distinguishes a system from a frame?
the hard architecture (bones and condyle) that serves as an animal's body's framework. skeletal system, skeleton, and systema skeletale. system: a collection of organs or bodily parts that function or are anatomically related; "the body contains a system for organs for digestion."
To know more about frame visit:
https://brainly.com/question/9708057
#SPJ1
A wire, of length L = 3. 8 mm, on a circuit board carries a current of I = 2. 54 μA in the j direction. A nearby circuit element generates a magnetic field in the vicinity of the wire of B = Bxi + Byj + Bzk, where Bx = 6. 9 G, By = 2. 6 G, and Bz = 1. 1 G. A) Calculate the i component of the magnetic force Fx, in newtons, exerted on the wire by the magnetic field due to the circuit element.
B) Calculate the k component of the magnetic force Fz, in newtons, exerted on the wire by the magnetic field due to the circuit element.
C) Calculate the magnitude of the magnetic force F, in newtons, exerted on the wire by the magnetic field due to the circuit element
The i component of the magnetic force on the wire is 1.06 × 10^-13 N. The k component of the magnetic force on the wire is 6.69 × 10^-14 N. The magnitude of the magnetic force on the wire is 1.26 × 10^-13 N.
To calculate the i component of the magnetic force, we use the formula:
F = I * L x B
where I is the current, L is the length of the wire, B is the magnetic field, and x represents the cross product.
The cross product of L and B gives a vector perpendicular to both L and B, which is in the i direction. So we only need to find the magnitude of the cross product and multiply it by I to get Fx.
|L x B| = |L| |B| sinθ
where θ is the angle between L and B. Since L is in the j direction and B has i and k components, we have:
|L x B| = L * Bz = (3.8 × 10^-3 m) * (1.1 × 10^-4 T) = 4.18 × 10^-8 N
Then, Fx = I * |L x B| = (2.54 × 10^-6 A) * (4.18 × 10^-8 N) = 1.06 × 10^-13 N
To calculate the k component of the magnetic force, we use the same formula and take the k component of the cross product:
|L x B|k = |L| |B| sin(π/2) = |L| |B| = (3.8 × 10^-3 m) * (6.9 × 10^-5 T) = 2.63 × 10^-7 N
Then, Fz = I * |L x B|k = (2.54 × 10^-6 A) * (2.63 × 10^-7 N) = 6.69 × 10^-14 N
The magnitude of the magnetic force is given by,
F = sqrt(Fx^2 + Fz^2) = sqrt((1.06 × 10^-13 N)^2 + (6.69 × 10^-14 N)^2) = 1.26 × 10^-13 N
To know more about magnetic force, here
brainly.com/question/3160109
#SPJ4
polaris and the star at the other end of the little dipper, kochab, are both apparent magnitude 2. in a photo of the night sky, they would appear similar to how they appear here in a planetarium simulation: larger than other stars. this is because
Polaris and Kochab's apparent magnitude of 2 and their proximity to the celestial pole make them appear larger in a photo or planetarium simulation compared to other stars.
A comparatively brilliant star as compared to other stars in the night sky, Kochab and Polaris both have an apparent magnitude of 2, making them both bright stars. In addition, they are both close to the celestial pole, which gives them a motionless appearance in the sky while giving the impression that other stars are rotating around them.
They stand out in the night sky because of their fixed location and brightness, and because of their brightness and proximity to the celestial equator, they look bigger than other stars in pictures or planetarium simulations.
Learn more about planetariums:
https://brainly.com/question/23119731
#SPJ4
the amplitude of the electric field of an electromagnetic wave is 196. v/m. what is the amplitude of the magnetic field of the electromagnetic wave?
The amplitude of the magnetic field of the electromagnetic wave is 6.53 x 10^-7 T.
To find the amplitude of the magnetic field of an electromagnetic wave, we need to use the relationship between the electric and magnetic fields in an electromagnetic wave.
According to this relationship, the amplitude of the magnetic field is equal to the amplitude of the electric field divided by the speed of light (c). Therefore, if the amplitude of the electric field of an electromagnetic wave is 196 V/m, the amplitude of the magnetic field can be calculated as follows:
Amplitude of magnetic field = Amplitude of electric field / Speed of light
Amplitude of magnetic field = 196 V/m / 3 x 10^8 m/s
Amplitude of magnetic field = 6.53 x 10^-7 T
It is important to note that the amplitude of the magnetic field and the electric field of an electromagnetic wave are perpendicular to each other and are responsible for the wave's propagation through space.
To learn more about : electromagnetic
https://brainly.com/question/13874687
#SPJ11
a bridge of length 50.0 m and mass 8.20 104 kg is supported on a smooth pier at each end as shown in the figure below. a truck of mass 2.50 104 kg is located 15.0 m from one end. what are the forces on the bridge at the points of support?
The forces at the left support are 1.61 x 105 N upward and the forces at the right support are 8.88 × 105 N downward by taking into account the forces acting on the bridge and the vehicle.
Finding the forces on a bridge with a truck positioned 15.0 metres from one end and piers supporting it at each end is the task at hand in this challenge. The truck weighs 2.50 x 104 kg, whereas the bridge is 50.0 metres long and 8.20 x 104 kg in weight.
The forces acting on the bridge at its places of support must be determined using Newton's laws of motion. We may determine that the forces at the left support are 1.61 x 105 N upward and the forces at the right support are 8.88 × 105 N downward by taking into account the forces acting on the bridge and the vehicle.
Learn more about forces:
https://brainly.com/question/30526425
#SPJ4
The complete question:
A bridge of length 50.0 m and mass 8.20×10^4 kg is supported on a smooth pillar at each end as shown. A truck of mass 2.50×10^4 kg is located 15.0 m from one end. What are the forces of the bridge at the points of support?
If we know the size of an asteroid, we can determine its density by A) comparing its reflectivity to the amount of light it reflects. B) looking for brightness variations as it rotates. C) determining its mass from its gravitational pull on a spacecraft, satellite, or planet. D) radar mapping. E) spectroscopic imaging.
Option C) is correct in determining its mass from its gravitational pull on a spacecraft, satellite, or planet. Knowing the mass and size of an asteroid allows us to calculate its density.
Option A) is incorrect because reflectivity only tells us about the asteroid's surface properties, not its density. Option B) is incorrect because brightness variations during rotation do not give us enough information to determine density. Option D) and E) are methods of studying asteroids but are not directly related to determining density.
Knowing the size of an asteroid alone is not enough to determine its density, as different materials can have different densities at the same size. By measuring the gravitational pull of the asteroid on a spacecraft, satellite, or planet, we can determine its mass. Once we have the mass and the size, we can calculate the asteroid's density. Methods such as radar mapping and spectroscopic imaging can provide additional information about the asteroid's composition, but they are not directly used to determine its density.
To learn about gravitational pull please visit:
https://brainly.com/question/13467280
#SPJ11
C) calculating its mass based on the gravitational attraction it exerts on a satellite, planet, or spacecraft.
We can determine an asteroid's mass by observing the gravitational pull it has on a neighbouring body, like a planet, satellite, or spacecraft. We can determine the asteroid's density once we know its mass and size. The gravitational force of an object will be stronger the denser it is. As a result, an asteroid must be denser the more massive it is for a given size.
The density of an asteroid can be determined using this method, which is especially helpful for small or erratic-shaped asteroids that are challenging to see using other techniques like radar mapping or spectroscopic imaging. Additionally, it can offer crucial details on the asteroid's makeup and structure, which can aid researchers in understanding the asteroid's formation and evolution.
learn more about mass here:
https://brainly.com/question/18064917
#SPJ11
this question has multiple answers. choose all that are correct. the hotter an object group of answer choices the brighter the object. the faster the object. the redder the object. the dimmer the object. the bluer the object. the slower the object.
The hotter an object is, the brighter and redder it appears, while cooler objects appear dimmer and bluer.
The question is asking about the relationship between an object's temperature and its brightness, color, and speed. The correct answers are that the hotter an object is, the brighter it appears and the redder it appears.
This is because hot objects emit more light, including more of the red end of the spectrum. The opposite is also true, meaning that cooler objects appear dimmer and bluer.
The speed of an object is not directly related to its temperature, so that answer is incorrect. However, it is important to note that the temperature of an object can affect its movement and velocity in certain situations.
To learn more about : objects
https://brainly.com/question/28308143
#SPJ11
Most battery-powered devices won?t work if you put the battery in backward. But for a device that you plug in, you can often reverse the orientation of the plug with no problem. Part A Explain the difference. a. You can often reverse the plug in the wall because it is an AC. However, a battery is a DC. b. Battery-powered devices are low-powered. c. Battery-powered devices have many defects in their construction d. You can often reverse the plug in the wall because it is a DC. However, a battery is an AC.
Battery-powered devices require the correct orientation of the battery to function properly.
The difference between being able to reverse the orientation of a plug in a wall outlet versus a battery has to do with the type of electrical current being used.
Wall outlets provide AC (alternating current) power, which means that the direction of the electrical flow switches back and forth rapidly. This means that the orientation of the plug doesn't matter, since the current will flow in either direction.
In contrast, batteries provide DC (direct current) power, which means that the electrical flow only goes in one direction. If a battery is inserted backwards, the current will flow in the wrong direction and the device won't work properly or may even be damaged. Therefore, battery-powered devices require the correct orientation of the battery to function properly.
Learn more about Battery-powered devices
https://brainly.com/question/13530533
#SPJ4
For battery-powered gadgets to operate properly, the battery must be positioned correctly.
The type of electrical current being utilised determines whether a plug in a wall outlet can be turned around vs whether a battery can.
The electricity that comes out of wall plugs is AC (alternating current), which means that the flow of electricity rapidly changes direction. Because the current can flow in either direction, the plug's orientation is irrelevant.
Batteries, on the other hand, deliver DC (direct current) power, which refers to electrical flow that only occurs in one direction. The device won't function properly or might even be harmed if a battery is inserted backwards since the current will flow in the wrong direction. As a result, batteries must be oriented appropriately for battery-powered gadgets to work properly.
Learn more about Battery-powered devices here:
https://brainly.com/question/13530533
#SPJ11
A person weighs 540 N on Earth. What is the person's mass?
describing light interactions with curved mirrors match the descriptions to the feature
a student is 2.50m away from a convex lens while her image is 1.80m from the lens, what is the focal length?
To find the focal length of a convex lens, we can use the formula:
1/f = 1/di + 1/do
Where f is the focal length, di is the distance of the image from the lens, and do is the distance of the object from the lens.
We are given that the student is 2.50m away from the lens, so do = 2.50m. We are also given that the image is 1.80m from the lens, so di = 1.80m.
Plugging these values into the formula, we get:
1/f = 1/1.80 + 1/2.50
Simplifying this equation, we get:
1/f = 0.5556
Multiplying both sides by f, we get:
f = 1.80 / 0.5556
Solving for f, we get:
f ≈ 3.24 meters
Therefore, the focal length of the convex lens is approximately 3.24 meters.
To know more about focal length of a convex lens:
https://brainly.com/question/1031772
#SPJ11
A convex lens is 1.80 meters from a student who is 2.50 meters distant, and its focal length is 1.04 meters.
To solve this problem, we can use the lens equation:
1/f = 1/do + 1/di
where f is the focal length of the lens, do is the object distance (distance of the object from the lens), and di is the image distance (distance of the image from the lens).
In this problem, the object distance is do = 2.50 m and the image distance is di = 1.80 m. We can plug these values into the lens equation and solve for the focal length:
1/f = 1/do + 1/di
1/f = 1/2.50 + 1/1.80
1/f = 0.4 + 0.56
1/f = 0.96
f = 1/0.96
f ≈ 1.04 meters
Therefore, the focal length of the convex lens is approximately 1.04 meters.
To learn more about focal length, refer:-
https://brainly.com/question/29870264
#SPJ11