Answer:
See Explanation
Explanation:
We can establish that there are chloride ions present in water if we add dilute trioxonitrate V acid to a sample of the water in drops followed by aqueous silver trioxonitrate V.
If a white precipitate is observed and the precipitate is found to be soluble in excess aqueous ammonia solution, then we can confirm the presence of chloride ion in the water.
Give the systematic (IUPAC) name for each molecule. This molecule has the condensed formula C H 3 C O C H 3. The oxygen atom has a double bond to the center carbon. systematic (IUPAC) name: This molecule has the condensed formula C H 3 C H 2 C H 2 C O C H 3. The oxygen atom has a double bond to carbon. systematic (IUPAC) name:
Answer: The IUPAC name of [tex]CH_3COCH_3[/tex] propan-2-one and [tex]CH_3CH_2CH_2COCH_3[/tex] is pentan-2-one.
Explanation:
The basic rules for naming of organic compounds are :
1. First select the longest possible carbon chain. The longest possible carbon chain should include the carbons of double or triple bonds or functional group.For the number of carbon atom, we add prefix as 'meth' for 1, 'eth' for 2, 'prop' for 3, 'but' for 4, 'pent' for 5, 'hex' for 6, 'sept' for 7, 'oct' for 8, 'nona' for 9 and 'deca' for 10.
2. The naming of alkane is done by adding the suffix -ane, alkene by adding the suffix -ene, alkyne by adding the suffix -yne and ketones by adding the suffix -one.;
3. The numbering is done in such a way that the carbon containing the functional group gets the lowest number. While writing the name, the word root is given first , followed by the position of carbon containing the functional group followed by the suffix.
The IUPAC name of [tex]CH_3COCH_3[/tex] propan-2-one and [tex]CH_3CH_2CH_2COCH_3[/tex] is pentan-2-one.
Determine the concentration of a solution of sodium hydroxide (NaOH) using a 0.500M Potassium Hydrogen Phthalate (KHP) standard solution. Acid-base indicator phenolphthalein is added in its (colorless) acidic form to a precise volume sample of KHP. The base NaOH is slowly added to the same of KHP. Once all the KHP has reacted with the base, the first excess drop of NaOH will cause the indicator to convert to its basic (pink) form.
Answer:
0.425M NaOH assuming the volume of KHP was 25.50mL and the volume of the NaOH solution was 30.0mL
Explanation:
The KHP reacts with NaOH as follows:
KHP + NaOH → KNaP + H₂O
Where 1 mole of KHP reacts per mole of KNaP
That means, the moles of KHP added to the NaOH solution = Moles NaOH at equivalence point. With the moles of NaOH and the volume in liters we can find the molar concentration of NaOH.
Assuming the volume added of KHP was 25.50mL and the solution of NaOH contains 30.0mL (0.0300L), the concentration of the NaOH is:
Moles KHP = Moles NaOH:
25.50mL = 0.02550L * (0.500mol / L) = 0.01275 moles KHP = Moles NaOH
Molarity NaOH:
0.01275 moles NaOH / 0.0300L =
0.425M NaOH assuming the volume of KHP was 25.50mL and the volume of the NaOH solution was 30.0mLA gas has an initial pressure of 633 torr and an initial volume of 87.3 mL. What is its new pressure if volume is changed to 45.0 mL?
Answer:
1230 torr
Explanation:
To solve this problem, all you need to do is apply Boyle's Gas Law: P1V1 = P2V2.
633 torr x 87.3 mL = 45.0 mL x P2 (Unknown)
P2 = 1230 torr
(Remember, we need to follow sig fig rules.)
The statement of the new pressure is "1228.02"
What is a pressure?The physical force exerted on an item is known as pressure. The pressure and volume of the gas are maintained at a constant temperature according to Boyle's law, that is pressure and volume are inversely proportional.
P1.V1 = P2.V2
Now,
P1 = 633 torr and V1 = 87.3 mL
V2 = 45.0 mL
In order to find the new volume, substituting these values into Boyle’s law, we get
[tex]P2\;=\;\frac{P1.V1}{V2} \\P2\;=\;\frac{(633\; torr).(87.3\;mL)}{(45.0\;mL)} \\[/tex]
P2 = 1228.02 torr
Hence the correct answer is 1228.02 torr.
Learn more about pressure here
https://brainly.com/question/23358029
#SPJ2
An inventor claims to have developed a new perfume that lasts a long time because it doesn't evaporate. Comment on this claim.
a. This would be impossible to make because the perfume would have to be pressurized in order to not evaporate.
b. This product is sure sweep the market making many happy customers.
c. In order to smell something, the molecules must evaporate and reach your nose. If the new perfume doesn't evaporate, it will not have an odor.
d. A perfume that does not evaporate could be toxic since the molecules never leave the skin.
Answer:
C
Explanation:
Perfume needs to evaporate in order to smell. If this perfume didn't evaporate, it would stay as a liquid and never smell.
It wouldn't be D, as no toxic perfumes is sold.
It's not A because perfume doesn't have to be pressurized in order to not evaporate.
It's not B, as it is a hasty conclusion to the claim. Plus, if the perfume did have an odor, even while not evaporating, the sales would be low as the product is that good.
What force is required to accelerate a car at a rate of 4 m/s2 if the car has a mass of 37.5 kg?
Answer:150
Explanation:I think because f=MxA and the mass is 37.5 kg while acceleation is 4 m/s^2 and when you multiply that is gets 150 so F=150 N
Given the balanced equation:
2H2 + 02 --> 2H20
How many grams of H20 is produced if you have 7g of O2
Answer: 7.88375g
Explanation:
Here is the dimensional analysis table
7g O2 | 1 mol O2 | 2 mol H2O | 18.02 g H2O
| 32 g O2 | 1 mol O2 | 1 mol H2O
You use grams to convert to moles of O2, then use that to find grams of H20
wally fluoride is an imaginary gaseous
compound with a molar mass of 314.2 g/mol.
(a) What is the density of wollmanium fluoride at 425 K
and 165 torr?
Answer:
[tex]\rho =1.96\frac{g}{L}[/tex]
Explanation:
Hello there!
In this case, since this imaginary gas can be modelled as an ideal gas, we can write:
[tex]PV=nRT[/tex]
Which can be written in terms of density and molar mass as shown below:
[tex]\frac{P}{RT} =\frac{n}{V} \\\\\frac{P}{RT} =\frac{m}{MM*V}\\\\\frac{P*MM}{RT} =\frac{m}{V}=\rho[/tex]
Thus, by computing the pressure in atmospheres, the resulting density would be:
[tex]\rho = \frac{165/760 atm * 314.2 g/mol}{0.08206\frac{atm*L}{mol*K}*425K} \\\\\rho =1.96\frac{g}{L}[/tex]
Best regards!
If you were to describe America, what would you describe? In one word
Answer:
Happy..
grateful
freedom
Explanation:
Answer:
huge
Explanation:
What is meant by X-ray
Answer:
An X-ray, or X-radiation, is a penetrating form of high-energy electromagnetic radiation. Most X-rays have a wavelength ranging from 10 picometers to 10 nanometers, corresponding to frequencies in the range 30 petahertz to 30 exahertz and energies in the range 124 eV to 124 keV.
Explanation:
An X-ray, or X-radiation, is a penetrating form of high-energy electromagnetic radiation. Most X-rays have a wavelength ranging from 10 picometers to 10 nanometers, corresponding to frequencies in the range 30 petahertz to 30 exahertz (30×1015 Hz to 30×1018 Hz) and energies in the range 124 eV to 124 keV. X-ray wavelengths are shorter than those of UV rays and typically longer than those of gamma rays. In many languages, X-radiation is referred to as Röntgen radiation, after the German scientist Wilhelm Conrad Röntgen, who discovered it on November 8, 1895. He named it X-radiation to signify an unknown type of radiation. Spellings of X-ray(s) in English include the variants x-ray(s), xray(s), and X ray(s).
A ___________ ion is made of 2 or more atoms of different elements
O nuclear
O polyatomic
O magnetic
O mono-atomic
Answer: polyatomic
Explanation:hope you find helpful
How is heat involved in chemical reactions and processes
Most chemical reactions involve the breaking and formation of chemical bonds. It takes energy to break a chemical bond but energy is released when chemical bonds are formed. If more energy is released than consumed, then the chemical reaction evolves heat and is said to be exothermic.
(Have a good day!)
Answer:
Most chemical reactions involve the breaking and formation of chemical bonds. It takes energy to break a chemical bond but energy is released when chemical bonds are formed. If more energy is released than consumed, then the chemical reaction evolves heat and it called exothermic.
How many grams are in 2.4 moles of sulfur?
Answer:
76.96
Explanation:
A mole is Avagadro’s number of atoms of a substance. My periodic table of the elements gives the Gram Atomic Mass of natural sulphur is 32.066 grams/mole. Therefore, 2.4 moles would have a mass of 76.96 grams.
What is the main difference between rain and hail?
Answer:
Rain is a liquid and hail is a solid.
b) How many kilojoules of heat will be released by the combustion of 22.52 g of this liquid at
constant pressure?
C2H5OH burning in a simple alcohol lamp is -1277.3kJ/mol
Answer:
Explanation:
You realize that C2H5OH releases -1277.3kJ/mol. We need to convert this to the amount based on the question. We that 22.52g of C2H5OH = 0.48884 mol.
This means that it will release (-1277.3)(0.48884) = 624.40 KJ of heat will be released. Note the negative sign is not necessary here (I think) because it says how much is released and not the change in heat of the system so it should be positive.
the maximum amount of copper sulfate that can be dissolved in 45.0g of water at 70C is 20.0g. what is the solubility of copper sulfate at that temperature?
(in grams per 100g water)
Answer:
That depends on the amount. Solubility is the maximum amount of salt dissolved in 100 g of water. So, if the amount is within limit, then yes. Solubility of anhydrous copper sulfate is 24.3 g/100 g water, so it is not bad. Put it in perspective, the solubility of NaCl is about 35 g/100 g water at room temperature. If the amount of copper sulfate is unknown, qualitative I'd say solid copper sulfate will dissolve in water completely.
Explanation:
If you use the pentahydrate CuSO4.5H2O then the solubility at 20°C is 20.8g/100ml H2O
If you use the anhydride, CuSO4. then the solubility at 20°C is 36.2g/100ml H2O
Arrange the following molecules in order of increasing bond polarity (highest bond polarity at the bottom):
a. NF3
b. NCl3
c. Nbr3
d. CF4
2.56 x 10^13 molecules of HgO equates to how many moles of HgO?
Explanation:
To find the number of moles in a substance given it's number of entities we use the formula
[tex]n = \frac{N}{L} \\[/tex]
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
We have
[tex]n = \frac{2.56 \times {10}^{13} }{6.02 \times {10}^{23} } \\ \\ \\ = 4.25 \times {10}^{ - 11} \: \: \: moles[/tex]
Hope this helps you
Aeronautical engineers have to consider the weight, trust, life, and drag of an airplane to determine whether or not…
Answer:
the plane will crash, or if it is usable or not.
2. A plant growing in response to the sunlight.
Gravitropism
Phototropism
Thigmotropism
Hydrotropism
Answer:
Phototropism.
Explanation:
Phototropism is the phenomenon of plants growing in response to light. This is a response to the plants to align or steer towards the source of sunlight, thereby becoming the 'path' to their growth.
The term "photo" means light and "tropism" means "growth" or movement towards". So, we can safely say that phototropism is the scientific and natural phenomenon of plants growing towards or in response to the sunlight.
Thus, the correct answer is phototropism.
Ammonia is produced by the chemical reaction of hydrogen and nitrogen
N2 + 2H2 → 2NH3
How many moles of H2 are needed to react with 1.8 moles of N2
Answer:
3.6 mol H₂
Explanation:
N₂ + 2H₂ → 2NH₃In order to convert from N₂ moles to H₂ moles we need to use a conversion factor. This conversion factor has to have N₂ moles in the denominator and H₂ moles in the numerator, using the stoichiometric coefficients of the reaction, as follows:
1.8 mol N₂ * [tex]\frac{2molH_2}{1molN_2}[/tex] = 3.6 mol H₂Is anyone good at chemistry if so can someone help me please ?
(NO LINKS)
In general, salts (formed during a neutralization reaction) are ionic compounds that are soluble in water and dissociate in solution into ions that conduct electricity. Out of the six statements given, there are three related statements that rehash the foregoing, and there are three related statements that are collectively incorrect.
Statements A, B, and D are (generally) true regarding salts formed during a neutralization reaction. When you consider that the net ionic equation of many acid-base neutralization reactions is H⁺(aq) + OH⁻(aq) → H₂O(l), the counterions of the H⁺(aq) and OH⁻(aq) are the aqueous spectator ions that comprise the salt. These ions are electrolytes, as they are charged species that can carry a current in solution; they are ionic compounds by definition since they're composed of cations and anions; and, as aqueous species, they're clearly dissolved in water.
Statements C, E, and F, as a whole, generally aren't true of such salts.
When 4.088 grams of a hydrocarbon, CxHy, were burned in a combustion analysis apparatus, 13.82 grams of CO2 and 2.829 grams of H2O were produced.
In a separate experiment, the molecular weight of the compound was found to be 78.11 amu. Determine the empirical formula and the molecular formula of the hydrocarbon.
Answer:
Empirical formula: CH
Molecular formula: C₆H₆
Explanation:
Based on the combustion of a hydrocarbon, the moles of CO₂ = Moles of Carbon in the hydrocarbon and the moles of H₂O = 1/2 moles of hydrogen in the hydrocarbon.
The empirical formula is the simplest whole number of atoms present in a molecule. With the moles of C and H we can find empirical formula:
Moles C -Molar mass CO₂ = 44.01g/mol-:
13.82g * (1mol / 44.01g) = 0.314 moles C
Moles H -Molar mass H₂O = 18.01g/mol-:
2.829g H₂O * (1mol / 18.01g) = 0.157 moles H₂O * (2mol H / 1mol H₂O) = 0.314 moles of H
The ratio of moles H: moles C:
0.314 moles / 0.314 moles = 1
That means empirical formula is:
CHWith the molecular weight and empirical formula we can find the molecular formula:
Molar mass CH = 12.01g/mol+1.01g/mol = 13.02g/mol
As the molecular weight of the molecule is 78.11amu = 78.11g/mol, there are:
78.11g/mol / 13.02g/mol = 6 times the empirical formula in the molecular formula
That means molecular formula is:
C₆H₆Given the following set of data from the decomposition of hydrogen peroxide,
how is the initial rate of the reaction (between time 0 and 300 seconds)
different from the rate of the reaction between 1800 and 3000 seconds?
[H202 M
Time (s)
2.0
0
1.6
300
1.4
600
1.1
1200
0.72
1800
0.15
3000
Answer:
what it mean I don't know
if eleanor starts with 25.00 ml of a weak acid (the concentration is 0.1084 m), then how many ml of 0.1817 m naoh has to be added to reach the equivalence point
Answer:
14.91 mL
Explanation:
Assuming the weak acid is monoprotic, we can solve this problem using the equation:
C₁V₁=C₂V₂Where subscript 1 stands for the Volume and Concentration of the weak acid, while 2 stands for those of NaOH.
We input the data:
25.00 mL * 0.1084 M = 0.1817 M * V₂And solve for V₂:
V₂ = 14.91 mLThe volume of 0.1817 M NaOH has to be added to reach the equivalence point is 14.91 mL.
How we calculate the volume?Volume for the given solution will be calculated from the below equation:
M₁V₁ = M₂V₂, where
M₁ = Molarity of weak acid = 0.1084 M
V₁ = volume of weak acid = 25 mL
M₂ = molarity of NaOH = 0.1817 M
V₂ = volume of NaOH = to find?
On putting all these values on the above equation and calculate for V₂ as:
V₂ = (0.1084)(25) / (0.1817) = 14.91 mL
Hence required volume is 14.91 mL.
To know more about molarity, visit the below link:
https://brainly.com/question/489225
How many moles of hydrogen atoms are there in 43g of pentathol C5H11OH
Answer:
Using your answer from Part A, calculate the volume of a mole of Na atoms (in cm3/mol ). Assume that the entire volume is occupied by Na atoms leaving no gaps or holes between adjacent atoms. (Answer A is V= 2.70*10^7)
A small file or organization use a payroll program for calculating staff wages each month each employee has a unique payroll number had is paid a fixed hourly rate which may be different for different employee. the system uses a master file containing long term details such as name Address, hourly,rate of pay and total pay for a year .the key field in the master file is the payroll number and the filled is stored in this field .each month by each a transaction file is produced containing details of the hours worked during that month by each employee,(a)state the type of processing used in this application and explain why this type of processing is suctable,(b) describe the processing take place each month when the payroll program is run staff with unsorted transaction file and end after the master file has been updated the pay slips have been printed,(c) explain what would happen during the processing of an employee payroll number had been entered incorrectly into the transaction file
Answer:
the company is now aarav and its CEO of samruddhi and is the CEO in meeting with holika and will come in to help with holika as brainlyiest as the company's chief financial adviser to solve di problems
Explanation:
it was the most common thing that happened in my first pregnancy in my first year and I m and the other girl Bo.. were pretty good vibes for the last day of samruddhi but they are still very much a many years after I was knowing that
You want to produce a casting of sterling silver that is silver plus 13 atomic% copper. Pure silver is too soft for many applications and adding 13 atomic% copper strengthens the silver without significantly changing the color. To produce the sterling silver casting, you are going to melt commercially available pure silver and copper in a furnace, and then you will pour the liquid metal mixture into a mold. The following questions relate to this alloy. (a) In selecting a furnace, what must be the minimum value of the high-temperature capability of your selected furnace
Answer:
1085° C
Explanation:
From the phase diagram of Ag-Cu shown below:
The minimum value of the high-temp required to be selected for the furnace is: 1085° C
This is on the grounds that the furnace should be chosen to such an extent that it should melt any sort of possible material including pure Cu that melts and liquefies at the temperature of 1085° C.
A light year is a measurement of ___________.
Which word best completes the sentence?
Answer:
distance
Explanation:
(=^w^=) it is literally just the distance a beam of light moves in one year
Answer:
It is distance( they were right)
Explanation:
Took test
Given this slope equation, calculate the x-intercept (the point at which y = 0).
y = 0.523x + 16.8
Answer:
The answer is (-31.58, 0) when rounded to 2 decimal places.
According to 2011/Chemistry Reference Tables
A. The electronegativity value of Cobalt is higher than the electronegativity value of Nickel
B. The electronegativity value of nitrogen is higher than the electronegativity value of fluorine
C. The electronegativity value of calcium is lower than the electronegativity value of silicon
D. The electronegativity value of boron is lower than the electronegativity value of beryllium
Answer:
C
Explanation:
C. The electronegativity value of calcium is lower than the electronegativity value of silicon
is the only correct statement.