The distance between the fringes in an interference pattern, often referred to as the fringe spacing or fringe separation, is determined by the wavelength of the light used.
The greater the wavelength, the larger the fringe spacing.
Yellow-green light and green light are both within the visible light spectrum, with yellow-green having a longer wavelength than green.
Therefore, the distance between the fringes will be greater for yellow-green light compared to green light.
The fringe spacing, also known as the fringe separation or fringe width, refers to the distance between adjacent bright fringes (or adjacent dark fringes) in the interference pattern. It is directly related to the wavelength of the light used.
According to the principles of interference, the fringe spacing is determined by the path length difference between the light waves reaching a particular point on the screen from the two slits. Constructive interference occurs when the path length difference is an integer multiple of the wavelength, leading to bright fringes. Destructive interference occurs when the path length difference is a half-integer multiple of the wavelength, resulting in dark fringes.
Learn more about interference here : brainly.com/question/31857527
#SPJ11
Two identical point charges of q = +2.25 x 10-8 C are separated by a distance of 0.85 m. How much work is required to move them closer together so that they are only 0.40 m apart?
The work required to move the charges closer together is -1.39 × 10^-18 J (negative because work is done against the electric force).
Given that, Two identical point charges of q = +2.25 x 10-8 C are separated by a distance of 0.85 m.
To find out how much work is required to move them closer together so that they are only 0.40 m apart. So,initial separation between charges = r1 = 0.85 m final separation between charges = r2 = 0.40 mq = +2.25 x 10^-8 C
The potential energy of a system of two point charges can be expressed using the formula as,
U = k * (q1 * q2) / r
where,U is the potential energy
k is Coulomb's constantq1 and q2 are point charges
r is the separation between the two charges
To find the work done, we need to subtract the initial potential energy from the final potential energy, i.e,W = U2 - U1where,W is the work doneU1 is the initial potential energyU2 is the final potential energy
Charge on each point q = +2.25 x 10^-8 C
Coulomb's constant k = 9 * 10^9 N.m^2/C^2
The initial separation between the charges r1 = 0.85 m
The final separation between the charges r2 = 0.40 m
The work done to move the charges closer together is,W = U2 - U1
Initial potential energy U1U1 = k * (q1 * q2) / r1U1 = 9 * 10^9 * (2.25 x 10^-8)^2 / 0.85U1 = 4.2 * 10^-18 J
Final potential energy U2U2 = k * (q1 * q2) / r2U2 = 9 * 10^9 * (2.25 x 10^-8)^2 / 0.4U2 = 2.81 * 10^-18 J
Work done W = U2 - U1W = 2.81 * 10^-18 - 4.2 * 10^-18W = -1.39 * 10^-18 J
To know more about work:
https://brainly.com/question/18094932
#SPJ11
The motion of a particle connected to a spring of spring constant k=5N/m is described by x = 10 sin (2 t). What is the potential energy of the particle in J) at t-2 s? Show your works. a. 0.125 b. 0.25 c. 0 d. 0.79 e. 1.0
The potential-energy of the particle at t = 2 s is approximately 0.79 J.
The potential energy of a particle connected to a spring can be calculated using the equation: PE = (1/2) k x^2, where PE is the potential energy, k is the spring-constant, and x is the displacement from the equilibrium position.
Given that k = 5 N/m and x = 10 sin(2t), we need to find x at t = 2 s:
x = 10 sin(2 * 2)
= 10 sin(4)
≈ 6.90 m
Substituting the values into the potential energy equation:
PE = (1/2) * 5 * (6.90)^2
≈ 0.79 J
Therefore, the potential energy of the particle at t = 2 s is approximately 0.79 J.
To learn more about potential-energy , click here : https://brainly.com/question/9349250
#SPJ11
Х A ball is thrown horizontally from the top of a building 0.7 km high. The ball hits the ground at a point 63 m horizontally away from and below the launch point. What is the speed of the ball (m/s) just before it hits the ground? Give your answer in whole numbers.
The speed of the ball just before it hits the ground is 28 m/s.
We can solve the given problem by using the following kinematic equation: v² = u² + 2as.
Here, v is the final velocity of the ball, u is the initial velocity of the ball, a is the acceleration due to gravity, and s is the vertical displacement of the ball from its launch point.
Let us first calculate the time taken by the ball to hit the ground:
Using the formula, s = ut + 1/2 at²
Where u = 0 (as the ball is thrown horizontally), s = 0.7 km = 700 m, and a = g = 9.8 m/s²
So, 700 = 0 + 1/2 × 9.8 × t²
Or, t² = 700/4.9 = 142.85
Or, t = sqrt(142.85) = 11.94 s
Now, we can use the horizontal displacement of the ball to find its initial velocity:
u = s/t = 63/11.94 = 5.27 m/s
Finally, we can use the kinematic equation to find the final velocity of the ball:
v² = u² + 2as = 5.27² + 2 × 9.8 × 700 = 27.8²
So, v = sqrt(27.8²) = 27.8 m/s
Therefore, the speed of the ball (m/s) just before it hits the ground is approximately 28 m/s.
To learn more about speed, refer below:
https://brainly.com/question/17661499
#SPJ11
A nucleus contains 68 protons and 92 neutrons and has a binding energy per nucleon of 3.82 MeV. What is the mass of the neutral atom ( in atomic mass units u)? = proton mass = 1.007277u H = 1.007825u ¹n = 1.008665u u = 931.494MeV/c²
The mass of the neutral atom, considering a nucleus with 68 protons and 92 neutrons, a binding energy per nucleon of 3.82 MeV, and the provided atomic mass units, appears to be -449.780444 u.
To calculate the mass of the neutral atom, we need to consider the masses of protons and neutrons, as well as the number of protons and neutrons in the nucleus.
Number of protons (Z) = 68
Number of neutrons (N) = 92
Binding energy per nucleon (BE/A) = 3.82 MeV
Proton mass = 1.007277 u
Neutron mass = 1.008665 u
Atomic mass unit (u) = 931.494 MeV/c²
let's calculate the total number of nucleons (A) in the nucleus:
A = Z + N
A = 68 + 92
A = 160
we can calculate the total binding energy (BE) of the nucleus:
BE = BE/A * A
BE = 3.82 MeV * 160
BE = 611.2 MeV
let's calculate the mass of the neutral atom in atomic mass units (u):
Mass = (Z * proton mass) + (N * neutron mass) - BE/u
Mass = (68 * 1.007277 u) + (92 * 1.008665 u) - (611.2 MeV / 931.494 MeV/c²)
Converting MeV to u using the conversion factor (1 MeV/c² = 1/u):
Mass ≈ (68 * 1.007277 u) + (92 * 1.008665 u) - (611.2 u)
Mass ≈ 68.476876 u + 92.94268 u - 611.2 u
Mass ≈ -449.780444 u
Learn more about binding energy: brainly.com/question/10095561
#SPJ11
An initially-stationary electric dipole of dipole moment □=(5.00×10−10C⋅m)1 placed in an electric field □=(2.00×106 N/C) I+(2.00×106 N/C)j. What is the magnitude of the maximum torque that the electric field exerts on the dipole in units of 10−3 Nnm ? 1.40 2.80 0.00 1.00
The magnitude of the maximum torque that the electric field exerts on the dipole is[tex]1.00×10^-3[/tex]N⋅m, which is equivalent to 1.00 N⋅mm or [tex]1.00×10^-3[/tex] N⋅m.
The torque (τ) exerted on an electric dipole in an electric field is given by the formula:
τ = p * E * sin(θ)
where p is the dipole moment, E is the electric field, and θ is the angle between the dipole moment and the electric field.
In this case, the dipole moment is given as p = 5.00×[tex]10^-10[/tex] C⋅m, and the electric field is given as E = (2.00×1[tex]0^6[/tex] N/C) I + (2.00×[tex]10^6[/tex] N/C) j.
To find the magnitude of the maximum torque, we need to determine the angle θ between the dipole moment and the electric field.
Since the electric field is given in terms of its x- and y-components, we can calculate the angle using the formula:
θ = arctan(E_y / E_x)
Substituting the given values, we have:
θ = arctan((2.00×[tex]10^6[/tex] N/C) / (2.00×[tex]10^6[/tex] N/C)) = arctan(1) = π/4
Now we can calculate the torque:
τ = p* E * sin(θ) = (5.00×[tex]10^-10[/tex]C⋅m) * (2.00×[tex]10^6[/tex] N/C) * sin(π/4) = (5.00×[tex]10^-10[/tex] C⋅m) * (2.00×[tex]10^6[/tex] N/C) * (1/√2) = 1.00×[tex]10^-3[/tex]N⋅m
To know more about torque refer to-
https://brainly.com/question/30338175
#SPJ11
Complete question
An initially-stationary electric dipole of dipole moment □=(5.00×10−10C⋅m)1 placed in an electric field □=(2.00×106 N/C) I+(2.00×106 N/C)j. What is the magnitude of the maximum torque that the electric field exerts on the dipole in units of 10−3 Nnm ?
Determine the electrical resistance of a 20.0 m length of tungsten wire of radius 0.200 mm. The resistivity of tungsten is 5.6×10^ −8 Ω⋅m.
The electrical resistance of a 20.0 m length of tungsten wire of radius 0.200 mm, when the resistivity of tungsten is 5.6×10^-8 Ω⋅m can be determined using the following steps:
1: Find the cross-sectional area of the wire The cross-sectional area of the wire can be calculated using the formula for the area of a circle, which is given by: A
= πr^2where r is the radius of the wire. Substituting the given values: A
= π(0.0002 m)^2A
= 1.2566 × 10^-8 m^2given by: R
= ρL/A Substituting
= (5.6 × 10^-8 Ω⋅m) × (20.0 m) / (1.2566 × 10^-8 m^2)R
= 1.77 Ω
To know more about resistivity visit:
https://brainly.com/question/29427458
#SPJ11
SOLID STATE PHYSICS - ASHCROFT/MERMIN Each partially filled band makes such a contribution to the current density; the total current density is the sum of these contributions over all bands. From (13.22) and (13.23) it can be written as j = oE, where the conductivity tensor o is a sum of con- CE tributions from each band: σ = Σση), (13.24) n ت % ) در جاده اهر - dk olm e2 Senat - » e.com (E,(k))v,(k),(k) (13.25) E=E/) 2. Deduce from (13.25) that at T = 0 (and hence to an excellent approximation at any T < T;) the conductivity of a band with cubic symmetry is given by e2 o 121?h T(E)US, (13.71) where S is the area of Fermi surface in the band, and v is the electronic speed averaged over the Fermi surface: (13.72) ſas pras). (Note that this contains, as a special case, the fact that filled or empty bands (neither of which have any Fermi surface) carry no current. It also provides an alternative way of viewing the fact that almost empty (few electrons) and almost filled (few holes) bands have low conductivity, since they will have very small amounts of Fermi surface.) Verify that (13.71) reduces to the Drude result in the free electron limit.
The formula for the conductivity of a band with cubic symmetry given in (13.71) is e2 o 121.
The h T(E)US, (13.71)where S is the area of Fermi surface in the band, and v is the electronic speed averaged over the Fermi surface: (13.72) ſas pras.The question requires us to verify that (13.71) reduces to the Drude result in the free electron limit. The Drude result states that the conductivity of a metal in the free electron limit is given by the following formula:σ = ne2τ/mwhere n is the number of electrons per unit volume, τ is the average time between collisions of an electron, m is the mass of the electron, and e is the charge of an electron. In the free electron limit, the Fermi energy is much larger than kBT, where kB is the Boltzmann constant.
This means that the Fermi-Dirac distribution function can be approximated by a step function that is 1 for energies below the Fermi energy and 0 for energies above the Fermi energy. In this limit, the integral over k in (13.25) reduces to a sum over states at the Fermi surface. Therefore, we can write (13.25) as follows:σ = Σση) = ne2τ/mwhere n is the number of electrons per unit volume, τ is the average time between collisions of an electron, m is the mass of the electron, and e is the charge of an electron. Comparing this with (13.71), we see that it reduces to the Drude result in the free electron limit. Therefore, we have verified that (13.71) reduces to the Drude result in the free electron limit.
To know more about conductivity:
https://brainly.com/question/31201773
#SPJ11
The emf of a battery is 12.0 volts. When the battery delivers a current of 0.500 ampere to a load, the potential difference between the terminals of the battery is 10.0 volts. What is the internal resistance of the battery?
The internal resistance of the battery is 4.0 ohms. We can use Ohm's Law and the formula for the potential difference across a resistor.
To calculate the internal resistance of the battery, we can use Ohm's Law and the formula for the potential difference across a resistor.
Ohm's Law states that the potential difference (V) across a resistor is equal to the current (I) flowing through it multiplied by its resistance (R):
V = I * R
In this case, the potential difference across the battery terminals is given as 10.0 volts, and the current flowing through the load is 0.500 ampere.
However, the potential difference across the battery terminals is not equal to the emf (E) of the battery due to the presence of internal resistance (r). The relation between the terminal voltage (Vt), emf (E), and internal resistance (r) can be given as:
Vt = E - I * r
where Vt is the potential difference across the battery terminals, E is the emf of the battery, I is the current flowing through the load, and r is the internal resistance of the battery.
Given that Vt = 10.0 volts and E = 12.0 volts, we can substitute these values into the equation:
10.0 volts = 12.0 volts - 0.500 ampere * r
Simplifying the equation, we have:
0.500 ampere * r = 12.0 volts - 10.0 volts
0.500 ampere * r = 2.0 volts
Dividing both sides of the equation by 0.500 ampere, we get:
r = 2.0 volts / 0.500 ampere
r = 4.0 ohms
Therefore, the internal resistance of the battery is 4.0 ohms.
To learn more about Ohm's Law click here
https://brainly.com/question/1247379
#SPJ11
: A student wishes to use a spherical concave mirror to make an astronomical telescope for taking pictures of distant galaxies. Where should the student locate the camera relative to the mirror? Infinitely far from the mirror Near the center of curvature of the mirror Near the focal point of the mirror On the surface of the mirror
The student should locate the camera at the focal point of the concave mirror to create an astronomical telescope for capturing pictures of distant galaxies.
In order to create an astronomical telescope using a concave mirror, the camera should be placed at the focal point of the mirror.
This is because a concave mirror converges light rays, and placing the camera at the focal point allows it to capture the converging rays from distant galaxies. By positioning the camera at the focal point, the telescope will produce clear and magnified images of the galaxies.
Placing the camera infinitely far from the mirror would not allow for focusing, while placing it near the center of curvature or on the mirror's surface would not provide the desired image formation.
To learn more about concave mirror click here: brainly.com/question/31379461
#SPJ11
Find the force corresponding to the potential energy
U(x) =-a/x + b/x^2 + cx^2
The force corresponding to the potential energy function U(x) = -a/x + b/[tex]x^{2}[/tex] + c[tex]x^{2}[/tex] can be obtained by taking the derivative of the potential energy function with respect to x. The force corresponding to the potential energy function is F(x) = a/[tex]x^{2}[/tex] - 2b/[tex]x^{3}[/tex] + 2cx.
To find the force corresponding to the potential energy function, we differentiate the potential energy function with respect to position (x). In this case, we have U(x) = -a/x + b/[tex]x^{2}[/tex] + c[tex]x^{2}[/tex].
Taking the derivative of U(x) with respect to x, we obtain:
dU/dx = -(-a/[tex]x^{2}[/tex]) + b(-2)/[tex]x^{3}[/tex] + 2cx
Simplifying the expression, we get:
dU/dx = a/[tex]x^{2}[/tex] - 2b/[tex]x^{3}[/tex] + 2cx
This expression represents the force corresponding to the potential energy function U(x). The force is a function of position (x) and is determined by the specific values of the constants a, b, and c in the potential energy function.
To learn more about potential energy click here:
brainly.com/question/1455245
#SPJ11
Is He Speeding? on an interstate highway in a rural region of Wyoming, a car is traveling at a speed of 39 m/s. In the driver exceeding the speed limit of 65.0 mi/hr? SOLUTION Convert meters in the speed to miles, and then convert from seconds to hours: .--- (39 m/s 1 mi mi/e- mi/hr 1,609 m The driver exceeding the speed limit and should slow down EXERCISE Suppose you are traveling at 55 ml/hr. Convert your speed to km/h and m/s. Hint kom/hr m/s Need Help? Head
The car is not speeding. The speed of 39 m/s is equivalent to approximately 87.2 mi/hr.
Since the speed limit is 65.0 mi/hr, the driver is not exceeding the speed limit. Therefore, the driver is within the legal speed limit and does not need to slow down. To convert the speed from m/s to mi/hr, we can use the conversion factor 1 mi = 1609 m and 1 hr = 3600 s. So, 39 m/s is equal to (39 m/s) * (1 mi / 1609 m) * (3600 s / 1 hr) ≈ 87.2 mi/hr. Hence, the driver is not speeding and is within the speed limit.
To learn more about speed:
https://brainly.com/question/28224010
#SPJ11
The diameter of an oxygen (2) molecule is approximately 0.300 nm.
For an oxygen molecule in air at atmospheric pressure and 18.3°C, estimate the total distance traveled during a 1.00-s time interval.
The oxygen molecule is estimated to travel approximately 0.94248 nm during a 1.00-second time interval in air at atmospheric pressure and 18.3°C.
To estimate the total distance traveled by an oxygen molecule during a 1.00-second time interval,
We need to consider its average speed and the time interval.
The average speed of a molecule can be calculated using the formula:
Average speed = Distance traveled / Time interval
The distance traveled by the oxygen molecule can be approximated as the circumference of a circle with a diameter of 0.300 nm.
The formula for the circumference of a circle is:
Circumference = π * diameter
Given:
Diameter = 0.300 nm
Substituting the value into the formula:
Circumference = π * 0.300 nm
To calculate the average speed, we also need to convert the time interval into seconds.
Given that the time interval is 1.00 second, we can proceed with the calculation.
Now, we can calculate the average speed using the formula:
Average speed = Circumference / Time interval
Average speed = (π * 0.300 nm) / 1.00 s
To estimate the total distance traveled, we multiply the average speed by the time interval:
Total distance traveled = Average speed * Time interval
Total distance traveled = (π * 0.300 nm) * 1.00 s
Now, we can approximate the value using the known constant π and convert the result to a more appropriate unit:
Total distance traveled ≈ 0.94248 nm
Therefore, the oxygen molecule is estimated to travel approximately 0.94248 nm during a 1.00-second time interval in air at atmospheric pressure and 18.3°C.
Learn more about Oxygen from the given link :
https://brainly.com/question/4030823
#SPJ11
The reason that low kilovoltages are used in mammography is: a. Because the tissues concerned have low subject contrast. b. None of the above. c. Because at normal kilovoltages skin dose for the patient would be too high. d. Because the filtration is low (about 0.5 mm aluminum equivalent)
"The correct answer is c. Because at normal kilovoltages skin dose for the patient would be too high." Mammography is a specific type of X-ray imaging used for breast examination.
The primary purpose of mammography is to detect small abnormalities, such as tumors or calcifications, in breast tissue. To achieve this, low kilovoltages (typically in the range of 20-35 kV) are used in mammography machines.
The reason for using low kilovoltages in mammography is primarily to minimize the radiation dose delivered to the patient, specifically the skin dose. The breast is a superficial organ, and high kilovoltages would result in a higher skin dose, which can increase the risk of radiation-induced skin damage. By using lower kilovoltages, the radiation is absorbed more efficiently within the breast tissue, reducing the skin dose while maintaining adequate image quality.
Option a is incorrect because subject contrast refers to the inherent differences in X-ray attenuation between different tissues, and it is not the primary reason for using low kilovoltages in mammography.
Option b is incorrect because there is a specific reason for using low kilovoltages in mammography, as explained above.
Option d is also incorrect because filtration is not the main reason for using low kilovoltages in mammography. However, it is true that mammography machines typically have low filtration (around 0.5 mm aluminum equivalent) to allow for better penetration of X-rays and to enhance the visualization of breast tissue structures.
To know more about mammography visit:
https://brainly.com/question/15009175
#SPJ11
An emf of 15.0 mV is induced in a 513-turn coil when the current is changing at the rate of 10.0 A/s. What is the magnetic
flux through each turn of the coil at an instant when the current is 3.80 A? (Enter the magnitude.)
Explanation:
We can use Faraday's law of electromagnetic induction to solve this problem. According to this law, the induced emf (ε) in a coil is equal to the negative of the rate of change of magnetic flux through the coil:
ε = - dΦ/dt
where Φ is the magnetic flux through the coil.
Rearranging this equation, we can solve for the magnetic flux:
dΦ = -ε dt
Integrating both sides of the equation, we get:
Φ = - ∫ ε dt
Since the emf and the rate of current change are constant, we can simplify the integral:
Φ = - ε ∫ dt
Φ = - ε t
Substituting the given values, we get:
ε = 15.0 mV = 0.0150 V
N = 513
di/dt = 10.0 A/s
i = 3.80 A
We want to find the magnetic flux through each turn of the coil at an instant when the current is 3.80 A. To do this, we first need to find the time interval during which the current changes from 0 A to 3.80 A:
Δi = i - 0 A = 3.80 A
Δt = Δi / (di/dt) = 3.80 A / 10.0 A/s = 0.380 s
Now we can use the equation for magnetic flux to find the flux through each turn of the coil:
Φ = - ε t = -(0.0150 V)(0.380 s) = -0.00570 V·s
The magnetic flux through each turn of the coil is equal to the total flux divided by the number of turns:
Φ/ N = (-0.00570 V·s) / 513
Taking the magnitude of the result, we get:
|Φ/ N| = 1.11 × 10^-5 V·s/turn
Therefore, the magnetic flux through each turn of the coil at the given instant is 1.11 × 10^-5 V·s/turn.
An ice cube of volume 50 cm 3 is initially at the temperature 250 K. How much heat is required to convert this ice cube into room temperature (300 K)? Hint: Do not forget that the ice will be water at room temperature.
An ice cube of volume 50 cm³ is initially at the temperature of 250K. Let's find out how much heat is required to convert this ice cube into room temperature (300 K)
Solution:
It is given that the initial temperature of the ice cube is 250K and it has to be converted to room temperature (300K).
Now, we know that to convert ice at 0°C to water at 0°C, heat is required and the quantity of heat required is given byQ = mL
where, Q = Quantity of heat required, m = Mass of ice/water and L = Latent heat of fusion of ice at 0°C.
Now, to convert ice at 0°C to water at 0°C, heat is required.
The quantity of heat required is given by:
Q1 = mL1
Where, m = mass of ice
= Volume of ice × Density of ice
= (50/1000) × 917 = 45.85g(1 cm³ of ice weighs 0.917 g)
L1 = Latent heat of fusion of ice = 3.34 × 10⁵ J/kg (at 0°C)
Therefore,
Q1 = mL1 = (45.85/1000) × 3.34 × 10⁵
= 153.32 J
Now, the water formed at 0°C has to be heated to 300K (room temperature).
Heat required is given byQ2 = mCΔT
Where, m = mass of water
= 45.85 g (from above)
C = specific heat capacity of water = 4.2 J/gK (at room temperature)
ΔT = Change in temperature = (300 - 0) K
= 300 K
T = Temperature of water at room temperature = 300K
Therefore, Q2 = mCΔT= 45.85 × 4.2 × 300= 57834 J
Therefore, total heat required = Q1 + Q2= 153.32 J + 57834 J= 57987.32 J
Hence, the heat required to convert the ice cube of volume 50 cm³ at a temperature of 250K to water at a temperature of 300K is 57987.32 J.
To know more about temperature visit :
https://brainly.com/question/7510619
#SPJ11
Calculate how many times you can travel around the earth using 1.228x10^2GJ with an E-scooter which uses 3 kWh per 100 km. Note that you can travel to the sun and back with this scooter using the energy of a whole year.
Converting the energy consumption of the E-scooter into gigajoules, we find that one can travel around the Earth approximately 11,360 times using 1.228x10^2 GJ of energy with the E-scooter.
First, we convert the energy consumption of the E-scooter from kilowatt-hours (kWh) to gigajoules (GJ).
1 kilowatt-hour (kWh) = 3.6 megajoules (MJ)
1 gigajoule (GJ) = 1,000,000 megajoules (MJ)
So, the energy consumption of the E-scooter per 100 km is:
3 kWh * 3.6 MJ/kWh = 10.8 MJ (megajoules)
Now, we calculate the number of trips around the Earth.
The Earth's circumference is approximately 40,075 kilometers.
Energy consumed per trip = 10.8 MJ
Total energy available = 1.228x10^2 GJ = 1.228x10^5 MJ
Number of trips around the Earth = Total energy available / Energy consumed per trip
= (1.228x10^5 MJ) / (10.8 MJ)
= 1.136x10^4
Therefore, approximately 11,360 times one can travel around the Earth using 1.228x10^2 GJ of energy with the E-scooter.
To know more about energy consumption, refer to the link :
https://brainly.com/question/30125850#
#SPJ11
The function x=(5.0 m) cos[(5xrad/s)t + 7/3 rad] gives the simple harmonic motion of a body. At t = 6.2 s, what are the (a) displacement, (b) velocity, (c) acceleration, and (d) phase of the motion?
(a) The displacement at t = 6.2 s is approximately 4.27 m.
(b) The velocity at t = 6.2 s is approximately -6.59 m/s.
(c) The acceleration at t = 6.2 s is approximately -106.75 m/s².
(d) The phase of the motion at t = 6.2 s is (7/3) rad.
To determine the values of displacement, velocity, acceleration, and phase at t = 6.2 s, we need to evaluate the given function at that specific time.
The function describing the simple harmonic motion is:
x = (5.0 m) cos[(5 rad/s)t + (7/3) rad]
(a) Displacement:
Substituting t = 6.2 s into the function:
x = (5.0 m) cos[(5 rad/s)(6.2 s) + (7/3) rad]
x ≈ (5.0 m) cos[31 rad + (7/3) rad]
x ≈ (5.0 m) cos(31 + 7/3) rad
x ≈ (5.0 m) cos(31.33 rad)
x ≈ (5.0 m) * 0.854
x ≈ 4.27 m
Therefore, the displacement at t = 6.2 s is approximately 4.27 m.
(b) Velocity:
To find the velocity, we need to differentiate the given function with respect to time (t):
v = dx/dt
v = -(5.0 m)(5 rad/s) sin[(5 rad/s)t + (7/3) rad]
Substituting t = 6.2 s:
v = -(5.0 m)(5 rad/s) sin[(5 rad/s)(6.2 s) + (7/3) rad]
v ≈ -(5.0 m)(5 rad/s) sin[31 rad + (7/3) rad]
v ≈ -(5.0 m)(5 rad/s) sin(31 + 7/3) rad
v ≈ -(5.0 m)(5 rad/s) sin(31.33 rad)
v ≈ -(5.0 m)(5 rad/s) * 0.527
v ≈ -6.59 m/s
Therefore, the velocity at t = 6.2 s is approximately -6.59 m/s.
(c) Acceleration:
To find the acceleration, we need to differentiate the velocity function with respect to time (t):
a = dv/dt
a = -(5.0 m)(5 rad/s)² cos[(5 rad/s)t + (7/3) rad]
Substituting t = 6.2 s:
a = -(5.0 m)(5 rad/s)² cos[(5 rad/s)(6.2 s) + (7/3) rad]
a ≈ -(5.0 m)(5 rad/s)² cos[31 rad + (7/3) rad]
a ≈ -(5.0 m)(5 rad/s)² cos(31 + 7/3) rad
a ≈ -(5.0 m)(5 rad/s)² cos(31.33 rad)
a ≈ -(5.0 m)(5 rad/s)² * 0.854
a ≈ -106.75 m/s²
Therefore, the acceleration at t = 6.2 s is approximately -106.75 m/s².
(d) Phase:
The phase of the motion is given by the argument of the cosine function in the given function. In this case, the phase is (7/3) rad.
Therefore, the phase of the motion at t = 6.2 s is (7/3) rad.
Learn more about acceleration:
https://brainly.com/question/460763
#SPJ11
Hoover Dam on the Colorado River is the highest dam in the United States at 221 m, with an output of 1300MW. The dam generates electricity with water taken from a depth of 151 m and an average flow rate of 620 m 3
/s. (a) Calculate the power in this flow. Report your answer in Megawatts 1,000,000 W =1MW 25. Hoover Dam on the Colorado River is the highest dam in the United States at 221 m, with an output of 1300MW. The dam generates electricity with water taken from a depth of 150 m and an average flow rate of 650 m 3
/s. (a) Calculate the power in this flow. (b) What is the ratio of this power to the facility's average of 680 MW? (These are the same values as the regular homework assignment) The ratio is 2.12 The ratio is 1.41 The ratio is 0.71 The ratio is 0.47
Hoover Dam on the Colorado River is the tallest dam in the United States, measuring 221 meters in height, with an output of 1300MW. The dam's electricity is generated by water that is taken from a depth of 151 meters and flows at an average rate of 620 m3/s.Therefore, the correct answer is the ratio is 1.41.
To compute the power in this flow, we use the formula:Power = (density) * (Volume flow rate) * (acceleration due to gravity) * (head). Where density is the density of water, which is 1000 kg/m3, and the acceleration due to gravity is 9.81 m/s2. Head = (depth) * (density) * (acceleration due to gravity). Substituting these values,Power = (1000 kg/m3) * (620 m3/s) * (9.81 m/s2) * (151 m) = 935929200 Watts. Converting this value to Megawatts,Power in Megawatts = 935929200 / 1000000 = 935.93 MWFor the second question,
(a) The power in the second flow is given by the formula:Power = (density) * (Volume flow rate) * (acceleration due to gravity) * (head)Where density is the density of water, which is 1000 kg/m3, and the acceleration due to gravity is 9.81 m/s2.Head = (depth) * (density) * (acceleration due to gravity) Power = (1000 kg/m3) * (650 m3/s) * (9.81 m/s2) * (150 m) = 956439000 Watts. Converting this value to Megawatts,Power in Megawatts = 956439000 / 1000000 = 956.44 MW
(b) The ratio of the power in this flow to the facility's average power is given by:Ratio of the power = Power in the second flow / Average facility power= 956.44 MW / 680 MW= 1.41. Therefore, the correct answer is the ratio is 1.41.
To know more about electricity visit:
brainly.com/question/31173598
#SPJ11
1)How much energy would be required to convert 15.0 grams of ice at –18.4 ºC into steam at 126.4 ºC.?
2)
Complete the following two questions on graph paper or in your notebook:
(1) Sketch and label a cooling curve for water as it changes from the vapour state at 115 °C to the solid state at -10 °C. Assume that the water passes through all three states of matter.
(2) How much heat is absorbed in changing 2.00 kg of ice at −5.0 °C to steam at 110 °C?
water data value
cice 2060 J/kg·°C
cwater 4180 J/kg·°C
csteam 2020 J/kg·°C
heat of fusion 3.34 x 105 J/kg
heat of vaporization 2.26 x 106 J/kg
This is a six step question. You will calculate five heat quantities and then total them.
Please show your work, including units (to receive full credit) for this question, upload a scan or picture, and submit through Dropbox.
The energy required to convert 15.0 grams of ice at -18.4ºC into steam at 126.4ºC is approximately 45,737 Joules.
To convert ice at -18.4ºC into steam at 126.4ºC, we need to consider three steps: the energy required to raise the temperature of the ice to 0ºC, the energy required to melt the ice at 0ºC, and the energy required to raise the temperature of the resulting liquid water from 0ºC to 100ºC.
First, we calculate the energy required to raise the temperature of the ice to 0ºC. The mass of ice is given as 15.0 grams, and the heat capacity of ice is 2.09 J/g·ºC. Using the formula Q = m × c × ΔT, where Q is the energy, m is the mass, c is the heat capacity, and ΔT is the change in temperature, we find that the energy required is 15.0 g × 2.09 J/g·ºC × (0 ºC - (-18.4 ºC)) = 556.8 J.
Next, we calculate the energy required to melt the ice at 0 ºC. The heat of fusion for ice is 334 J/g. So the energy required is 15.0 g × 334 J/g = 5010 J.
Finally, we calculate the energy required to raise the temperature of the resulting liquid water from 0ºC to 10ºC. The heat capacity of water is 4.18 J/g·ºC. Using the same formula as before, we find that the energy required is 15.0 g × 4.18 J/g·ºC × (100ºC - 0ºC) = 6270 J.
Adding up all three steps, we get a total energy requirement of 556.8 J + 5010 J + 6270 J = 11,836.8 J.
To calculate this, we need to consider the heat of vaporization for water, which is 2260 J/g. Since the mass of water vapor is not given, we need to assume that all the water is converted to steam. Therefore, the energy required is 15.0 g × 2260 J/g = 33,900 J.
Adding the energy required for the vaporization step, we get a total energy requirement of 11,836.8 J + 33,900 J = 45,736.8 J.
Hence, the energy required to convert 15.0 grams of ice at -18.4 ºC into steam at 126.4 ºC is approximately 45,737 Joules.
To know more about energy here https://brainly.com/question/2003548
#SPJ4
Part A What percentage of all the molecules in the glass are water? Express your answer using six significant figures. D | ΑΣΦ VO ? MAREH nwater Submit Request Answer % Assume the total number of molecules in a glass of liquid is about 1,000,000 million trillion. One million trillion of these are molecules of some poison, while 999,999 million trillion of these are water molecules.
Assuming the total number of molecules in a glass of liquid is about 1,000,000 million trillion.
One million trillion of these are molecules of some poison, while 999,999 million trillion of these are water molecules.
Express your answer using six significant figures. To determine the percentage of all the molecules in the glass that are water, we need to use the following formula: % of water = (number of water molecules/total number of molecules) × 100.
To know more about liquid visit:
https://brainly.com/question/20922015
#SPJ11
Imagine you had a device to use for this experiment. The device would shoot a series of 2. 0 g balls along the surface at the box, each with a velocity of 30 cm/s [E60N]. In 2. 0 s it shoots 10 successive 2. 0 balls, all of which collide and rebound off the 100g box, as with the first ball. What would be the total impulse delivered to the box by the 10 collisions?What would be the total change in momentum of the 100g box?What would be the total change in velocity of the 100g box after these 10 collisions?
The total impulse delivered to the box by the 10 collisions is 0.006 kg·m/s, the total change in momentum of the 100 g box is 0.012 kg·m/s, and the total change in velocity of the 100 g box after these 10 collisions is 0.12 m/s.
The total impulse delivered to the box by the 10 collisions can be calculated using the equation:
Impulse = Change in Momentum
First, let's calculate the momentum of each 2.0 g ball. The momentum of an object is given by the equation:
Momentum = mass x velocity
Since the mass of each ball is 2.0 g and the velocity is 30 cm/s, we convert the mass to kg and the velocity to m/s:
mass = 2.0 g = 0.002 kg
velocity = 30 cm/s = 0.3 m/s
Now, we can calculate the momentum of each ball:
Momentum = 0.002 kg x 0.3 m/s = 0.0006 kg·m/s
Since 10 balls are shot in succession, the total impulse delivered to the box is the sum of the impulses from each ball. Therefore, we multiply the momentum of each ball by the number of balls (10) to find the total impulse:
Total Impulse = 0.0006 kg·m/s x 10 = 0.006 kg·m/s
Next, let's calculate the total change in momentum of the 100 g box. The initial momentum of the box is zero since it is at rest. After each collision, the box gains momentum in the opposite direction to the ball's momentum. Since the box rebounds off the ball with the same momentum, the change in momentum for each collision is twice the momentum of the ball. Therefore, the total change in momentum of the box is:
Total Change in Momentum = 2 x Total Impulse = 2 x 0.006 kg·m/s = 0.012 kg·m/s
Finally, let's calculate the total change in velocity of the 100 g box after these 10 collisions. The change in velocity can be found using the equation:
Change in Velocity = Change in Momentum / Mass
The mass of the box is 100 g = 0.1 kg. Therefore, the total change in velocity is:
Total Change in Velocity = Total Change in Momentum / Mass = 0.012 kg·m/s / 0.1 kg = 0.12 m/s
Therefore, the total impulse delivered to the box by the 10 collisions is 0.006 kg·m/s, the total change in momentum of the 100 g box is 0.012 kg·m/s, and the total change in velocity of the 100 g box after these 10 collisions is 0.12 m/s.
To more about velocity visit:
https://brainly.com/question/34025828
#SPJ11
JUNCTION RULE: (1) I 1
=I 3
+I 4
LOOP RULE: (2) LOOP I (LEFT CIRUT) V 0
−I 3
R 3
−I 3
R 2
−I 1
R 1
=0 LOOP 2 (RIGHT CIRCUT): (3) −I 4
R 4
+I 3
R 3
+I 3
R 3
=0
According to the junction rule, the current entering junction 1 is equal to the sum of the currents leaving junction 1: I1 = I3 + I4.
The junction rule, or Kirchhoff's current law, states that the total current flowing into a junction is equal to the total current flowing out of that junction. In this case, at junction 1, the current I1 is equal to the sum of the currents I3 and I4. This rule is based on the principle of charge conservation, where the total amount of charge entering a junction must be equal to the total amount of charge leaving the junction. Applying the loop rule, or Kirchhoff's voltage law, we can analyze the potential differences around the loops in the circuit. In the left circuit, traversing the loop in a clockwise direction, we encounter the potential differences V0, -I3R3, -I3R2, and -I1R1. According to the loop rule, the algebraic sum of these potential differences must be zero to satisfy the conservation of energy. This equation relates the currents I1 and I3 and the voltages across the resistors in the left circuit. Similarly, in the right circuit, traversing the loop in a clockwise direction, we encounter the potential differences -I4R4, I3R3, and I3R3. Again, the loop rule states that the sum of these potential differences must be zero, providing a relationship between the currents I3 and I4.
To learn more about Kirchhoff's current law, Click here:
https://brainly.com/question/30394835
#SPJ11
2. A shell is fired from a cliff horizontally with initial velocity of 800 m/s at a target on the ground 150 m below. How far away is the target? ( 2 pts) 3. You are standing 50 feet from a building and throw a ball through a window that is 26 feet above the ground. Your release point is 6 feet off of the ground (hint: you are only concerned with Δ y). You throw the ball at 30ft/sec. At what angle from the horizontal should you throw the ball? (hint: this is your launch angle) (2pts)
Horizontal displacement = 4008 meters
The launch angle should be approximately 20.5°
To find how far away the target is, the horizontal displacement of the shell needs to be found.
This can be done using the formula:
horizontal displacement = initial horizontal velocity x time
The time taken for the shell to reach the ground can be found using the formula:
vertical displacement = initial vertical velocity x time + 0.5 x acceleration x time^2
Since the shell is fired horizontally, its initial vertical velocity is 0. The acceleration due to gravity is 9.8 m/s^2. The vertical displacement is -150 m (since it is below the cliff).
Using these values, we get:-150 = 0 x t + 0.5 x 9.8 x t^2
Solving for t, we get:t = 5.01 seconds
The horizontal displacement is therefore:
horizontal displacement = 800 x 5.01
horizontal displacement = 4008 meters
3. To find the launch angle, we can use the formula:
Δy = (v^2 x sin^2 θ)/2g Where Δy is the vertical displacement (26 ft), v is the initial velocity (30 ft/s), g is the acceleration due to gravity (32 ft/s^2), and θ is the launch angle.
Using these values, we get:26 = (30^2 x sin^2 θ)/2 x 32
Solving for sin^2 θ:sin^2 θ = (2 x 26 x 32)/(30^2)sin^2 θ = 0.12
Taking the square root:sin θ = 0.35θ = sin^-1 (0.35)θ = 20.5°
Therefore, the launch angle should be approximately 20.5°.
Note: The given measurements are in feet, but the calculations are done in fps (feet per second).
Learn more about horizontal displacement here https://brainly.com/question/6107697
#SPJ11
Which of the alternatives are correct for an elastic
collision?
a. In an elastic collision there is a loss of kinetic energy.
b. In the elastic collision there is no exchange of mass between
the bodie
The alternative that is correct for an elastic collision is that in an elastic collision there is no loss of kinetic energy and no exchange of mass between the bodies involved.
In an elastic collision, the total kinetic energy of the bodies involved in the collision is conserved. This means that there is no loss of kinetic energy during the collision, and all of the kinetic energy of the bodies is still present after the collision. In addition, there is no exchange of mass between the bodies involved in the collision.
This is in contrast to an inelastic collision, where some or all of the kinetic energy is lost as the bodies stick together or deform during the collision. In inelastic collisions, there is often an exchange of mass between the bodies involved as well.
Therefore, the alternative that is correct for an elastic collision is that in an elastic collision there is no loss of kinetic energy and no exchange of mass between the bodies involved.
To know more about elastic collision, refer
https://brainly.com/question/12644900
#SPJ11
QUESTION 17 Doppler Part A A carousel that is 5.00 m in radius has a pair of 600-Hz sirens mounted on posts at opposite ends of a diameter. The carousel rotates with an angular velocity of 0.800 rad/s. A stationary listener is located at a distance from the carousel. The speed of sound is 350 m/s. What is the maximum frequency of the sound that reaches the listener?Give your answer accurate to 3 decimals. QUESTION 18 Doppler Parts What is the minimum frequency of sound that reaches the listener in Part A? Give your answer accurate to 3 decimals. QUESTION 19 Doppler Part what is the beat frequency heard in the problem mentioned in partA? Give your answer accurate to three decimals. Doppler Part D what is the orientation of the sirens with respect to the listener in part A when the maximum beat frequency is heard? Onone of the above the sirens and the listener are located along the same line. one siren is behind the other. the sirens and the listener form an isosceles triangle, both sirens are equidistant to the listener.
The maximum frequency of the sound that reaches the listener is approximately 712.286 Hz. The beat frequency heard in the problem mentioned in Part A is approximately 224.571 Hz.
Radius of the carousel (r) = 5.00 m
Frequency of the sirens (f) = 600 Hz
Angular velocity of the carousel (ω) = 0.800 rad/s
Speed of sound (v) = 350 m/s
(a) The maximum frequency occurs when the siren is moving directly towards the listener. In this case, the Doppler effect formula for frequency can be used:
f' = (v +[tex]v_{observer[/tex]) / (v + [tex]v_{source[/tex]) * f
Since the carousel is rotating, the velocity of the observer is equal to the tangential velocity of the carousel:
[tex]v_{observer[/tex] = r * ω
The velocity of the source is the velocity of sound:
[tex]v_{source[/tex]= v
Substituting the given values:
f' = (v + r * ω) / (v + v) * f
f' = (350 m/s + 5.00 m * 0.800 rad/s) / (350 m/s + 350 m/s) * 600 Hz
f' ≈ 712.286 Hz
Therefore, the maximum frequency of the sound that reaches the listener is approximately 712.286 Hz.
(b) Minimum Frequency of the Sound:
The minimum frequency occurs when the siren is moving directly away from the listener. Using the same Doppler effect formula:
f' = (v + [tex]v_{observer)[/tex] / (v - [tex]v_{source)[/tex] * f
Substituting the values:
f' = (v + r * ω) / (v - v) * f
f' = (350 m/s + 5.00 m * 0.800 rad/s) / (350 m/s - 350 m/s) * 600 Hz
f' ≈ 487.714 Hz
Therefore, the minimum frequency of the sound that reaches the listener is approximately 487.714 Hz.
(c) The beat frequency is the difference between the maximum and minimum frequencies:
Beat frequency = |maximum frequency - minimum frequency|
Beat frequency = |712.286 Hz - 487.714 Hz|
Beat frequency ≈ 224.571 Hz
Therefore, the beat frequency heard in the problem mentioned in Part A is approximately 224.571 Hz.
(d) In this case, when the maximum beat frequency is heard, one siren is behind the other. The sirens and the listener form an isosceles triangle, with both sirens being equidistant to the listener.
Learn more about sound here:
https://brainly.com/question/30045405
#SPJ11
As part of Jayden's aviation training, they are practicing jumping from heights. Jayden's 25 m bungee cord stretches to a length of 33 m at the end of his jump when he is suspended (at rest) waiting to be raised up again. Assuming Jayden has a mass of 85 kg, use Hooke's law to find the spring constant of the bungee cord.
The spring constant of Jayden's bungee cord is approximately 104.125 N/m.
To find the spring constant of the bungee cord, we can utilize Hooke's law, which states that the force exerted by a spring is directly proportional to the displacement of the spring from its equilibrium position. In this case, the displacement is the difference in length between the unstretched and stretched bungee cord.
The change in length of the bungee cord during Jayden's jump can be calculated as follows:
Change in length = Stretched length - Unstretched length
= 33 m - 25 m
= 8 m
Now, Hooke's law can be expressed as:
F = k * x
where F is the force exerted by the spring, k is the spring constant, and x is the displacement.
Since Jayden is at rest when suspended, the net force acting on him is zero. Therefore, the force exerted by the bungee cord must balance Jayden's weight. The weight can be calculated as:
Weight = mass * acceleration due to gravity
= 85 kg * 9.8 m/s^2
= 833 N
Using Hooke's law and setting the force exerted by the bungee cord equal to Jayden's weight:
k * x = weight
Substituting the values we have:
k * 8 m = 833 N
Solving for k:
k = 833 N / 8 m
= 104.125 N/m
Therefore, the spring constant of Jayden's bungee cord is approximately 104.125 N/m.
To learn more about spring constant
https://brainly.com/question/23885190
#SPJ11
Q5. A Michelson interferometer uses a laser with a wavelength of 530 nm. A cuvette of thickness 10 mm is placed in one arm containing a glucose solution. As the glucose concentration increases, 88 fringes are observed to emerge at the screen. What is the change in refractive index of the glucose solution?
The change in refractive index of the glucose solution is 2.34.
Michelson interferometer is an instrument used to measure the refractive index of a substance. It uses a laser beam that is divided into two equal parts, and each part travels a different path before recombining to produce an interference pattern on a screen.
A cuvette of thickness 10 mm is placed in one arm containing a glucose solution. As the glucose concentration increases, 88 fringes are observed to emerge at the screen. We need to determine the change in refractive index of the glucose solution.
The fringe order is given by:
n = (2t/λ) * δwhere,
t = thickness of the cuvette
λ = wavelength of the laser
δ = refractive index of the glucose solution
Since we know the values of t, λ and n, we can solve for
δδ = (nλ) / (2t)
= (88 × 530 nm) / (2 × 10 mm)
= 2.34
Therefore, the change in refractive index of the glucose solution is 2.34.
Learn more about refractive index, here
https://brainly.com/question/83184
#SPJ11
How do the vibrational and rotational levels of heavy hydrogen (D²) molecules compare with those of H² molecules?
The vibrational and rotational levels of heavy hydrogen (D²) molecules are similar to those of H² molecules, but with some differences due to the difference in mass between hydrogen (H) and deuterium (D).
The vibrational and rotational levels of diatomic molecules are governed by the principles of quantum mechanics. In the case of H² and D² molecules, the key difference lies in the mass of the hydrogen isotopes.
The vibrational energy levels of a molecule are determined by the reduced mass, which takes into account the masses of both atoms. The reduced mass (μ) is given by the formula:
μ = (m₁ * m₂) / (m₁ + m₂)
For H² molecules, since both atoms are hydrogen (H), the reduced mass is equal to the mass of a single hydrogen atom (m_H).
For D² molecules, the reduced mass will be different since deuterium (D) has twice the mass of hydrogen (H).
Therefore, the vibrational energy levels of D² molecules will be shifted to higher energies compared to H² molecules. This is because the heavier mass of deuterium leads to a higher reduced mass, resulting in higher vibrational energy levels.
On the other hand, the rotational energy levels of diatomic molecules depend only on the moment of inertia (I) of the molecule. The moment of inertia is given by:
I = μ * R²
Since the reduced mass (μ) changes for D² molecules, the moment of inertia will also change. This will lead to different rotational energy levels compared to H² molecules.
The vibrational and rotational energy levels of heavy hydrogen (D²) molecules, compared to H² molecules, are affected by the difference in mass between hydrogen (H) and deuterium (D). The vibrational energy levels of D² molecules are shifted to higher energies due to the increased mass, resulting in higher vibrational states.
Similarly, the rotational energy levels of D² molecules will differ from those of H² molecules due to the change in moment of inertia resulting from the different reduced mass. These differences in energy levels arise from the fundamental principles of quantum mechanics and have implications for the spectroscopy and behavior of heavy hydrogen molecules compared to regular hydrogen molecules.
To know more about hydrogen ,visit:
https://brainly.com/question/24433860
#SPJ11
A normal person has a near point at 25 cm and a far point at infinity. Suppose a nearsighted person has a far point at 157 cm. What power lenses would prescribe?
To correct the nearsightedness of a person with a far point at 157 cm, lenses with a power of approximately -0.636 diopters (concave) should be prescribed. Consultation with an eye care professional is important for an accurate prescription and fitting.
To determine the power of lenses required to correct the nearsightedness of a person, we can use the formula:
Lens Power (in diopters) = 1 / Far Point (in meters)
Given that the far point of the nearsighted person is 157 cm (which is 1.57 meters), we can substitute this value into the formula:
Lens Power = 1 / 1.57 = 0.636 diopters
Therefore, a nearsighted person with a far point at 157 cm would require lenses with a power of approximately -0.636 diopters. The negative sign indicates that the lenses need to be concave (diverging) in nature to help correct the person's nearsightedness.
These lenses will help diverge the incoming light rays, allowing them to focus properly on the retina, thus improving distance vision for the individual. It is important for the individual to consult an optometrist or ophthalmologist for an accurate prescription and proper fitting of the lenses based on their specific needs and visual acuity.
To learn more about lenses
https://brainly.com/question/28039799
#SPJ11
Astronomers measure the distance to a particular star to
be 6.0 light-years (1 ly = distance light travels in 1 year). A spaceship travels from Earth to the vicinity of this star at steady speed, arriving in 3.50 years as measured by clocks on the spaceship. (a) How long does the trip take as measured by clocks in Earth's reference frame? (b) What distance does the spaceship travel as measured in its own
reference frame?
The time taken by the spaceship as measured by Earth's reference frame can be calculated as follows: Δt′=Δt×(1−v2/c2)−1/2 where:v is the speed of the spaceship as measured in Earth's reference frame, c is the speed of lightΔt is the time taken by the spaceship as measured in its own reference frame.
The value of v is calculated as follows: v=d/Δt′where:d is the distance between Earth and the star, which is 6.0 light-years. Δt′ is the time taken by the spaceship as measured by Earth's reference frame.Δt is given as 3.50 years.Substituting these values, we get :v = d/Δt′=6.0/3.50 = 1.71 ly/yr.
Using this value of v in the first equation v is speed, we can find Δt′:Δt′=Δt×(1−v2/c2)−1/2=3.50×(1−(1.71)2/c2)−1/2=3.50×(1−(1.71)2/1)−1/2=2.42 years. Therefore, the trip takes 2.42 years as measured by clocks in Earth's reference frame.
The distance traveled by the spaceship as measured in its own reference frame is equal to the distance between Earth and the star, which is 6.0 light-years. This is because the spaceship is at rest in its own reference frame, so it measures the distance to the star to be the same as the distance measured by Earth astronomers.
Learn more about speed:
brainly.com/question/13943409
#SPJ11