Variation in individual streams results from c. climate, geology and soil, topography, and plant cover.
Environmental factors affect individual variation within a species because natural factors determine personal resilience in an ecosystem. If the individual variation does not match the environment, the individual will be selected so it cannot continue its descent.
One of the individual variations within a species can be influenced by environmental factors. Environmental factors will bring out visible properties (different phenotypes); for example climate, temperature, sunlight intensity, pH, wind, rainfall, and altitude. Variation is a characteristic that exists in one species from another and is different to distinguish it, while mutations are changes that occur in genes or chromosomes.
Learn more about a variety of living things here :
https://brainly.com/question/10376897
#SPJ4
the state plane grid system for florida has three zones. which of the state plane projections, would be used map the florida east zone and why?
The majority of state plane zones are based on either a Lambert conformal conic projection or a transverse Mercator projection projections.
The state's shape and its zones determine which of the two map projections should be used. Typically, zones that are long east-west are separated into states that are long east-west . This coordinate system uses comparatively small zones to reach its high level of accuracy. The various zones of the State Plane Coordinate System often correspond to county boundaries (except in Alaska). A maximum typical State Plane coordinate system scaling factor is typically not greater there, at the boundary of the zone. The Lambert Conic is the projection that is most frequently used for states that are longest from east to west. This projection says the scale factor for east-west lines is constant.
Learn more about projections here :
https://brainly.com/question/14862305
#SPJ4
after viewing the map on canada's forest regions (figure 5-13 page 113) what trends do you notice in terms of the location of sawmills and pulp and paper mills and the distribution of the majority of canada's population
The trends in the distribution of Canada's majority population, and the location of the sawmills and pulp and paper mills is that they are located in areas that have forests.
How is Canada's population distributed?Canada is one of the largest nations in the world when it comes to landmass but there are parts of Canada that are not occupied by many people. This is because a lot of Northern Canada is basically frozen and would therefore be a difficult place to live for anyone.
This is why most of Canada's population is located in the South, where the climates are not as cold, and there are natural resources like forests. It is these forests that sawmills settle next to, as shown by the map of Canada's forest regions. We see saw mills in higher quantities in Cordilleran forests than any other place.
Pulp and paper mill factories on the other hand, see, to prefer Boreal forests.
Find out more on Canada's population at https://brainly.com/question/19310330
#SPJ1
the arctic and antarctic sea-ice extents are both changing. one important influence on how sea ice extent changes through time (in response to global mean sea-surface temperature rise) is the surroundings. whereas the arctic sea ice is surrounded by continental crust not covered by glaciers (with the exception of greenland), the antarctic sea ice surrounds a continent that is almost entirely covered by glacial ice.
The correct answer is Arctic sea ice has declined over the past five decades, while Antarctic sea ice has increased, and then declined.
Sea ice's surface albedo decreases as it melts at the surface, increasing the amount of solar energy absorbed by the ice surface and accelerating ice melt. By creating a barrier between the cooler air above and the warmer water below, sea ice also helps to keep the air cool. Penguins, seals, and other creatures depend on the Antarctic sea ice as part of their ecosystem. Sea ice cover has decreased globally as a result of warmer air and ocean temperatures. Less ice means less heat is reflected, which leads to more severe heatwaves everywhere. But it also means more severe winters because warmer air can cause the polar jet stream, a high-pressure wind that circles the Arctic region, to drop south and bring harsh cold with it.
To learn more about Arctic sea click the link below:
brainly.com/question/27645110
#SPJ4
a seismic station recorded an earthquake that was 4,000 km away. what was the travel time difference between p-wave arrival and s-wave arrival in seconds?
A seismic station 4,000 kilometers distant noted the earthquake. The time gap between the arrival of the P-wave and the arrival of the S-wave was 320 seconds.
Please refer to the attached picture below. The graph indicates that the P-wave will reach the seismic station in 7 minutes. P-wave extrapolation stops at a vertical time scale cutoff of 7 minutes. At 12 min. 20 sec., the S-wave will reach the seismic station.
On the vertical scale, one minute is split into three segments. Thus, each segment will last 20 seconds.
So, travel time difference = S wave arrival - P wave arrival
= 12 minutes 20 seconds - 7 minutes
= 5 minutes 20 seconds
We know that 1 minute = 60 seconds
So, 5 minutes = 5 × 60
= 300 seconds
Consequently, the distance between the arrival of P wave and the arrival of S-wave = 300 seconds + 20 seconds
= 320 seconds
To learn more about earthquake
https://brainly.com/question/29500066
#SPJ4
which of the following are factors that influence the amount of rainfall that becomes runoff versus groundwater?
The factors that influence the amount of rainfall that becomes runoff are the nature of the ground surface, the rate of rainfall and the slope of the land. (Option D)
Surface runoff, also known as overland flow, refers to the water discharged which occurs on the ground surface when excessive water from rainwater, stormwater, meltwater, or other sources, saturates the ground up to a point that water can no longer be sufficiently and rapidly infiltrate in the soil. In order words, when rainfall exceeds the soil infiltration rate, surface runoff happens. Factors affecting runoff include rainfall intensity, ground water storage capacity, slope of the ground, and infiltration rate.
Note: The question is incomplete as it is missing options which are A) nature of the ground surface. B) rate of rainfall. C) slope of the land. D) all of the above.
Learn more about Runoff:
https://brainly.com/question/25796102
#SPJ4
What is needed in an area in order for it to be settled? (Choose ALL that
apply)
Answer: A settlement is a place where people live. A settlement could be anything from an isolated farmhouse to a mega city (settlement with over 10 million people). Settlements can either be temporary or permanent. Temporary settlements include things such as refugee camps.
Explanation:
an earthquake of magnitude 7.0 on the richter scale is how much greater than an earthquake of magnitude 5.0?
On the Richter scale, a magnitude 7.0 earthquake is 100 times more powerful than a magnitude 5.0 earthquake.
When compared to a magnitude 5 earthquake, a magnitude 7 earthquake is 100 times stronger. The scale went up from 5 to 7, which is an increase of 2, so you multiply the magnitude of the weaker earthquake earthquake by 107-5, which equals 102, to get the magnitude of the stronger earthquake..
earthquake, any jolting of the earth that occurs suddenly and is brought on by seismic waves moving through the planet's rocks. Seismic waves magnitude are created when a form of energy that has been trapped in the Earth's crust for a while suddenly escapes, typically when massive rocks that are rubbing up against one another suddenly fracture and "slip." Most earthquakes happen along geologic faults, which are confined areas earthquake where rock masses move relative to one another. The major fault lines in the world can be found on the edges of the enormous tectonic plates that make up the crust of the Earth. (View the list of large earthquakes.)
Learn more about earthquake here
https://brainly.com/question/29500066
#SPJ4
If the Earth were to reorient such that the North Pole always received direct sunlight (always faced the Sun), how would that change Earth's climate? A. The equator would not change in climate. B. The South Pole would get colder. C. The equator would get warmer. D. The North Pole would get more wind.
If the Earth were to reorient such that the North Pole always received direct sunlight (always faced the Sun),The South Pole would get colder.
The Earth receives sunlight due to its tilt and rotation about its axis, and the position of the North Pole is realigned with the position of the Sun, so more sunlight reaches the north, snow and ice melt faster, The equator has little effect, but Antarctica is darker and colder, indirectly affecting Earth's climate.
therefore, If the Earth were to reorient such that the North Pole always received direct sunlight (always faced the Sun),The South Pole would get colder.
learn more about climates at https://brainly.com/question/2170808
#SPJ4
In order to reach the persian gulf from iraq through which country must you travel.
We must pass through Kuwait in order to travel from Iraq to the Persian Gulf.
The Persian Gulf, also referred to as the Arabian Gulf, is a Mediterranean sea located in Western Asia. The waterway is an extension of the Arabian Sea and runs between Iran and the Arabian Peninsula. It connects to the Gulf of Oman in the east via the Strait of Hormuz.
The Persian Gulf is significant because it produces around one-third of the world's oil, has more than half of the world's reserves of crude oil, and makes a considerable contribution to the world's natural gas reserves.
For more info about 'Persian Gulf' click on below link - brainly.com/question/1105731
#SPJ4
The sun's ray are strongest or most direct at the
Answer:
Explanation:
The equator
The sun’s rays are strongest at the equator where the sun is most directly overhead and where UV rays must travel the shortest distance through the atmosphere.
1.In a heavy snow year that sees an expansion of the zone of accumulation, what happens to the line of equilibrium?It increases in elevation.It retreats away from the toe.It remains constant.It decreases in elevation.It retreats uphill.
In a heavy snow year that sees an expansion of the zone of accumulation the line of equilibrium increases in elevation.
The area above the firn line on a glacier known as the accumulation zone is where snowfall accumulates and outpaces ablation losses. Each year, the accumulation and ablation zones are divided by the annual equilibrium line. The area of a glacier's surface, typically at higher elevations, where there is net snow accumulation that later turns into firn and glacier ice is known as the accumulation zone. The area of the glacier where snow accumulates and freezes moves outward from that point.
Equilibrium line cuts through and separates the accumulation and the factors that lead to material destruction as a result of some factors, like erosion.
The line of equilibrium rises in elevation as a result of substance deposition during a heavy snow year that sees an expansion of the zone of accumulation.
Learn more about Accumulation zone, here
https://brainly.com/question/17219369
#SPJ4
The expansion of the universe after its origin takes place by a phenomenon called.
The expansion of universe origin after an event known as "Big bang"
Before the big bang it was assumed that universe's size was like pea and with increasing temperature and gases in it become denser and later it explodes.
Big bang assumes to be starting point for the expansion of the universe and other bodies starting to be formed like planets, comets etc. This phenomenon has its own importance for studying the continuing growth of the universe.
To know more about big bang theory, click below
https://brainly.com/question/17209127
f differential erosion exists a region, which of the following is true? a) it is likely to be a humid region with minimal weathering. b) it is likely to be a humid region of sandstone rocks. c) it is likely to be an arid region of massive igneous rocks. d) it is likely to be an arid region of multiple sedimentary layers.
If differential erosion exists in a region, it's likely to be an arid region of multiple sedimentary layers.
Differential erosion is a type of erosion that occurs at irregular and varying rates. It's caused by the resistance and surface hardness difference in the materials that are being eroded. Softer and weaker ones will be eroded more quickly than the harder ones.
When differential erosion occurs, it most likely happens in an arid region that has multiple sedimentary layers. Multiple different sedimentary layers mean multiple different materials, each having its own hardness and erosion rate. Various erosion rates then will occur, showing differential erosion.
Learn more about erosion at https://brainly.com/question/17905503
#SPJ4
examine the figure. of the three forms of hard stabilization illustrated here, which one is the groin?
The correct answer is Hard stabilization is the use of human-made structures to prevent coastal erosion.
Rocks, soils, and/or sands near the coast are worn down or carried away by the process of coastal erosion, which is brought on by local sea level rise, powerful wave action, and coastal flooding. As a result of the action of waves, currents, tides, wind-driven water, waterborne ice, or other storm-related effects, coastal erosion is the loss or displacement of land as well as the long-term removal of silt and rocks along the coastline.The last main erosional process is known as hydraulic action, and it involves erosion brought on by the power of a water body. Rocks are forced toward the ocean as a result of the shock wave pressure that separates them from their source. Stacks, sea caves, and sea arches are common formations along coastlines that have undergone erosion.
To learn more about coastal erosion click the link below:
brainly.com/question/20087178
#SPJ4
how does the inward drop in air pressure cause heat to be added to a hurricane that is over the ocean?
Once an air parcel reaches the hurricane's eyewall, it turns upward and rises due to a process called convection.
The inward drop in air pressure in a hurricane allows inward flowing air to cool below the sea-surface temperature, which in turn allows more heat to flow in from the sea.
Due to low pressure at its center, twists stream toward the focal point of the tempest and air is constrained vertical. High in the climate, winds stream away from the tempest, which permits additional air from underneath to rise. The air that ascents should be warm and wet so it frames the billows of the tempest.
Know more about the hurricanes - https://brainly.com/question/19139017
#SPJ4
in the accompanying hydrograph for major river, a flood was caused by a single episode of heavy rainfall 50 kilometers upstream. when did the rain most likely occur?
In the adjacent hydrograph for a significant river, a single incident of intense rainfall 50 km upstream has been the reason of a flood. When did that rain at time C most likely happen?
What exactly is a flood?Floods, the most common sort or natural disaster, happen when an excess of water submerges normally dry ground. Floods are frequently brought on by prolonged periods of heavy rain, quick runoff, or storm surges from tropical cyclones or tsunamis in coastal locations.
What consequences do floods have?Flooding's negative effects include: the taking of a life. Infrastructure and property destruction. dangers of landslides, erosion, or road closures.
To know more about Flood visit:
https://brainly.com/question/29417169
#SPJ4
the earth's surface absorbs solar radiation and then radiates it into the atmosphere as infrared radiation. greenhouse gases absorb this radiation and trap heat within the atmosphere. this process leads to which of the following properties of earth's atmosphere? (hint: from which direction is the atmosphere heated?)
Pressure increases with altitude Temperature decreases with altitude in the troposphere Ozone O3 is formed in the thermosphere Temperature increases with altitude in the troposphere
The troposphere, the first and lowest layer of the Earth's atmosphere, is where most meteorological events take place and comprises 75% of the planet's total atmospheric mass, 99% of the entire mass of water vapor, and aerosols.
The Greek terms tropos, which means "spinning," and sphaira, which means "sphere," indicate that rotational turbulence mixes the air layers and so defines the structure and phenomena of the troposphere.
To learn more about troposphere refer here:
https://brainly.com/question/13497783
#SPJ4
Near what land mass did Hurricane Jeanne die?
please help , the marking period is going to end in a few days.
Near the island of Hispaniola Hurricane Jeanne lose strength and downgrade to a tropical depression.
What do you mean by Hurricane?A tropical storm that has sustained winds of 74 mph or greater is referred regarded as a hurricane.
Jeanne reached hurricane strength on September 16 near the eastern coast of the Dominican Republic on the island of Hispaniola after passing through Puerto Rico, but later that day as it proceeded across the mountainous island, it weakened to tropical storm status.
Therefore, Hurricane Jeanne lose strength and downgrade to a tropical depression near the island of Hispaniola.
Learn more about Hurricane, here;
https://brainly.com/question/14548385
#SPJ1
overturn occurs after ice melts and water at 4 0c rises, while a blank is the area of a lake in summer where the water temperature changes abruptly due to thermal stratification.
In temperate lakes, a spring capsize occurs after ice melts and water at 4 0C rises, while a thermocline is the area of a lake in summer where the water temperature changes suddenly due to thermal position.
The subcaste that separates warmer face mixed water from cooler deep water is known as a thermocline.
Water bodies correspond of layers that vary in consistence grounded on temperature. The epipelagic zone, also known as the" ocean skin" or the" sun zone," is the topmost subcaste of the ocean's face. The commerce of this subcaste with the wind and swells mixes the water and disperses the heat. The thermocline is located at this subcaste's base. The subcaste that lies between the face's warmer mixed water and its cooler depths is known as a thermocline. In a body of water, the thermocline can generally be linked by the unforeseen temperature change that occurs.
Learn more about Thermocline, here
https://brainly.com/question/17258307
#SPJ4
Complete question:
In temperate lakes, a ______ overturn occurs after ice melts and water at 4 0C rises, while a ______ is the area of a lake in summer where the water temperature changes abruptly due to thermal stratification.
___ are based on connections. They are organized around a focal point and including the areas linked to the focus through patterns of trade,communication, and/or transportation routes.
Functional regions are based on connections. They are organized around a focal point and including the areas linked to the focus through patterns of trade, communication, and/or transportation routes.
What is Functional regions aboutA functional region is a predetermined geographic area with a predetermined focal point and function.
In geography, a functional region is a space dominated by a node, focal point, or central hub and enclosed by interconnected links. The principal node in a functional region features neighboring areas with shared social, political, or economic functions that relate to transportation, trade, communications.
Hence, it is a region with a main purpose that is built around a certain activity. For whatever function or activity the functional region is concerned with, there is typically a central hub or point of distribution within the region.
Learn more about functional region from;
brainly.com/question/12860221
#SPJ1
Functional regions are based on connections. They are organized around a focal point and including the areas linked to the focus through patterns of trade, communication, and/or transportation routes.
What is Functional regions about?A functional region is a predetermined geographic area with a predetermined focal point and function.
In geography, a functional region is a space dominated by a node, focal point, or central hub and enclosed by interconnected links. The principal node in a functional region features neighboring areas with shared social, political, or economic functions that relate to transportation, trade, communications.
Hence, it is a region with a main purpose that is built around a certain activity. For whatever function or activity the functional region is concerned with, there is typically a central hub or point of distribution within the region.
Learn more about functional region from
brainly.com/question/12860221
#SPJ1
What are the four classes of large organic molecules important to life on earth?.
There are four classes of large organic molecules important to life on Earth—carbohydrates, lipids, proteins, and nucleic acids.
They carry out the chemical processes necessary for life and build the cells of an organism. All of these molecules contain carbon, which is the fundamental component of life and is referred to as a biomolecule since it is a component of living matter. Because all living things contain carbon, organic substances are crucial. They are the fundamental elements that drive many cycles that shape the planet. Consider the carbon cycle, which involves the exchange of carbon between plants and animals during photosynthesis and cell respiration. Carbon atoms are joined to other atoms, such as hydrogen, oxygen, and nitrogen, to form organic molecules. The four categories of organic molecules found in the human body are lipids, proteins, nucleic acids, and carbohydrates. Energy is generated through the consumption of carbohydrates.
Learn more about organic molecules here:
https://brainly.com/question/14160379
#SPJ4
oil and gas of the paradox basin: the location and age of the basin, its interpreted tectonic setting, the sequence of rocks, and the origin and geologic trapping of petroleum oil and gas of the permian basin: the location and age of the basin, its interpreted tectonic setting, the sequence of rocks, and the origin and geologic trapping of petroleum limestone resources of the southwest united states: the location, age, and formation names of the main sources of limestone used in the production of cement and lime in arizona, utah, nevada, and southern california
According to the Federal Reserve Bank of Dallas, the larger Permian Basin is responsible for almost 40% of the nation's total oil production and nearly 15% of its natural gas production.
And the Delaware Basin alone offers a sizable amount of prospective expansion. The Delaware Basin in West Texas and Southern New Mexico has the potential to generate 281 trillion cubic feet of natural gas and 46.3 billion barrels of oil, according to a 2018 estimate by the U.S. Geological Survey. In fact, the Permian Basin is a significant and lucrative supply of domestic natural gas and oil. But according to the most recent geological evaluations and American energy use, Permian oil reserves are not expected to last Americans for 200 years.
Lean more about the oil production here:
https://brainly.com/question/8610457
#SPJ4
what is the reason that coasts such as those in canada, north britain, and scandinavia have been uplifted?
The reason that coasts such as those in Canada, north Britain, and Scandinavia have been uplifted are The crust is rebounding after the recession of glaciers. The correct answer is option (d).
The coast is the land near an expanse. The line of a coast, where land meets water, is named the border by water. Waves, tides, and currents help form coastlines. Such a classification leads to the description of three comprehensive tectonic types of coasts: (1) accident coasts, (2) following-edge coasts, and (3) borderline ocean coasts.
A glacier is a continuous body of thick icicles namely uniformly affecting under allure own weight. A glacier forms a place the growth of snowstorms surpasses allure ablation over many ages, frequently day. The best glacier on the planet, Antarctica's Lambert Glacier, is one of the planet's fastest-mobile hailstone streams.
To know more about glaciers refer to: https://brainly.com/question/11447301
#SPJ4
The complete question is:
What is the reason that coasts such as those in Canada, north Britain, and Scandinavia have
been uplifted?
A) The sea level has fallen.
B) The ocean crust has subsided.
C) The crust has uplifted due to plate tectonics.
D) The crust is rebounding after the recession of glaciers.
Which of these pieces of evidence did alfred wegener cite to support his hypothesis of continental drift?.
Wegner propounded the continental drifting theory and stated that continents are moving apart from each other.
To support this theory, he also cited some evidence which proves that continents are really drifting, they are
Jig saw fit, after matching the coastline of Africa and Soth America and also of North America and Europe, these all coastlines were perfectly fit into each other.Fossil fuels, same kind of fossil fuel were found on different continents which are thousands of kilometers away from each other.Placer deposits, rocks of minerals were found where there is no evidence of such mineral for example gold's placer found in Ghana coast, but the source are available in Brazil, so it was assumed such deposits were derived from Brazilian plateau in Ghana.Rocks, of same age were found on different continents so it was assumed that once these continents are together like in case of Brazilian and African plateau.Tillite deposits, are the sediments deposited by the glaciers and such similarities were found over India, Africa, Antartica, Australia (once they all were part of Gondwana).But such evidence was enough to support its theory because other scientists were not satisfied with the forces that cause this drifting of continents.
To know more about continental drifting theory, click below
https://brainly.com/question/16538264
the rules that constrain how point, line, and polygon features share geometry. defines and enforces data integrity within a geodatabase as well as allowing advanced relationship queries and feature creation/editing tasks.
Geodatabase topology is the rules that constrain how point, line, and polygon features share geometry. Defines and enforces data integrity within a geodatabase as well as allowing advanced relationship queries and feature creation/editing tasks.
About Geodatabase topologyA Geographic Information System (GIS) is a database system with analytical capabilities for spatially referenced data. GIS has the ability to integrate spatial data and attribute data so that the analysis is able to produce the desired information. GIS can also be used to input, store, retrieve, process, analyze and generate geospatial data, to support decision making in the planning and management of natural resources, environmental transportation, urban facilities and other public services.
In GIS there is a database that has a geographic reference (georeference) or also called a geodatabase. Geodatabase is an integrated database, a central source of data and can be accessed by various existing and future applications for information and analysis needs. Geodatabase is a relational data management concept that contains spatial and nonspatial data. Geodatabase helps the process of storing and managing geographic information in a standard data management system.
By using a geodatabase, users will get several benefits at once. These include all features and their attributes having a centralized storage location, the ability to group features into subtypes and create spatial and attribute validation rules. Geodatabase became known in ArcGIS 9.x. Geodatabase is a relational database containing geographic information. Geodatabase consists of feature classes (spatial) and tables (non-spatial).
Learn more about geodatabase topology at https://brainly.com/question/8972168.
#SPJ4
how would a decrease in the tilt of the earth's axis change the intensity of the seasons in the mid-latitudes?
A decrease in the tilt of the earth's axis changes the intensity of the seasons in the mid-latitudes when tilt affects the amount of sunlight on the Earth's surface receives throughout the year.
The tilt of the earth's axis of rotation is a condition in which the angle of the earth's axis of a planet deviates from the perpendicular drawn to its orbital plane. This kind of tilt makes the amount of sunlight that the earth receives varies at each point. This phenomenon then affects the change of seasons on earth throughout the year.
Seasonal changes will affect temperature changes. Temperature changes are affected by latitude. The temperature will be inversely proportional to latitude. The higher the latitude, the lower the temperature. The temperature will rise or warm when the latitude is at a low point.
More about Earth's Axis an:
https://brainly.com/question/14639935
#SPJ4
tectonic plates unit review practice 1 of 81 of 8 itemspause question why is no land created or destroyed at transform boundaries?(1 point) responses because the plates only slip past each other at these boundaries because the plates only slip past each other at these boundaries because the plates are more dense at these boundaries because the plates are more dense at these boundaries because magma rushes into gaps at these boundaries because magma rushes into gaps at these boundaries because the plates crumble into each other at these boundaries
Review for the unit on tectonic plates. One of 81 total products. The plates only pass each other at certain borders, causing a pause.
Simply put, what do tectonic plates mean?A tectonic plate, also known as a lithospheric plate, is a substantial slab of solid rock with an uneven shape that is typically made up of the both the oceanic and continental lithosphere. The Ocean and Antarctic Provinces are some of the largest plates, but they can vary in size from very few hundred to a few thousand kilometers broad.
Tectonic plates: how are they created?Cooler portions of the Earth's crust were dragged downward into to the hotter upper mantle starting about four billion years ago, causing damage to and deterioration of the overlying crust. According the authors, this cycle repeated until the weak spots established plate borders.
To know more about Tectonic plates visit:
https://brainly.com/question/19317822
#SPJ4
ECONOMICS: Economic Systems: Who makes decisions about production, distribution and consumption in each of the systems below? Traditional: ☆ Capitalism (Free-Enterprise): Socialism: Communism: are they would fall on the spectrum below.
Economic system varies with time and also influences the production, distribution and consumption system in the economy.
In traditional economic system, people are main participant in decision making about all this process.
In capitalist economic system, private sector is making decision about the economy like what to produce? how to produce? and for whom to produce.
In socialistic economic system government is the main body to make such decision about society and concerned about equal treatment and no privileges for anyone.
In communism economic system community as whole chose a government and they make decision for people.
To know more about economic systems, click below
https://brainly.com/question/14854239
when do rocks along a fault have the highest amount of stress and stored elastic strain? multiple choice right before an earthquake several weeks or months after an earthquake none of the choices are correct. because rocks cannot behave in an elastic manner right after an earthquake
The correct response to the question is "just before an earthquake," when rocks around a fault have the maximum levels of strain or absorbed elastic strain.
Explain what rocks are.According to geology, a rock is just a naturally occurring material made up of crystalline crystals of ore deposits that have fused to together form a solid mass. The minerals might not even have formed simultaneously.
How are rocks used?They are a part of daily life and aid in the development of new technology. We use mineral deposits for things like construction, cosmetics, transportation, infrastructure, and appliances.
To know more about Rocks visit:
brainly.com/question/11473096
#SPJ4
most earthquakes occur at depths of: multiple choice 100-700 km. less than 100 km. greater than 100 km.
Most earthquakes occur at depths of less than 100 km. As most of the earthquakes restricted to this depth only except the deep focus earthquake at trench.
Earthquakes happen in the crust or upper mantle, which extends from the surface of the planet to a depth of around 800 kilometers (about 500 miles).The intensity of shaking at the surface from an earthquake that happens at 500 km depth is significantly less than if the same earthquake had occurred at 20 km depth because the intensity of shaking from an earthquake weakens with increasing distance from the earthquake's source.Additionally, we can learn a lot about the tectonic environment and the structure of the Earth from the depths at which earthquakes occur. The subduction zones, where plates collide and one plate is subducted beneath another, are the most obvious examples of this. We can see specifics of the structure of a subduction zone, such as how steeply it is dipping and whether the down-going plate is planar or bending, by carefully plotting the location and depth of earthquakes associated with the zone. The mechanics and characteristics of the deformation in the subduction zone are revealed by these specifics, which are significant because they provide us with knowledge of their nature.Learn more about Earthquakes, here
https://brainly.com/question/29500066
#SPJ4