2. What is the mass of 5.3 moles of CaCl2?
Answer:
590 g CaCl₂
General Formulas and Concepts:
Chemistry - Atomic Structure
Reading a Periodic TableUsing Dimensional AnalysisExplanation:
Step 1: Define
5.3 mol CaCl₂
Step 2: Identify Conversions
Molar Mass of Ca - 40.08 g/mol
Molar Mass of Cl - 35.45 g/mol
Molar Mass of CaCl₂ - 40.08 + 2(35.45) = 110.98 g/mol
Step 3: Convert
[tex]5.3 \ mol \ CaCl_2(\frac{110.98 \ g \ CaCl_2}{1 \ mol \ CaCl_2} )[/tex] = 588.194 g CaCl₂
Step 4: Check
We are given 2 sig figs. Follow sig fig rules and round.
588.194 g CaCl₂ ≈ 590 g CaCl₂
what is the chemical equation for this?
Answer:
J
Explanation:
Chlorine Gas is Cl2 so if it isnt on the left as that its wrong.
Then on the products see that Fe III means Fe is +3 charge so we have to have 3 Cl to balance it to 0 since each cl as -1 charge.
FInally check if the equation is balanced J is maybe H but its to blurry to tell
Explain why, in a balanced chemical equation C + O2 CO2, we know that 1 gram of C will not react exactly with 1 gram of O2.
Answer:
See the answer below
Explanation:
From the equation, 1 mole of C requires 1 mole of O2 for a balanced reaction.
1 g of C will not exactly react with 1 g of O2 because the 1 g of each of the reactants contain different amounts of the substance.
The amount (in moles) of a substance is the mass of that substance divided by the molar mass.
Hence, 1 g of C will contain 1/12 moles of the substance while 1 g of O2 will contain 1/32 moles of the substance.
pls this is my second time asking these questions, i'm sorry, but i really need help!!! 1. what happens to atoms when there is a chemical reaction? 2. what are the rules that have to be followed for atoms? 3. what do these rules mean for chemical reactions? sorry, chemistry isn’t really my best subject lol
Answer:
the atoms of the original substances gain, lose and even share their very own electrons. write the symbols of the elements that form the compound. Write down the valency, and lastly go over valencies. This is all I got so far. I hope this helps
Explanation:
halogenation of propane
Answer:
The halogenation of propane discloses an interesting feature of these reactions. All the hydrogens in a complex alkane do not exhibit equal reactivity. For example, propane has eight hydrogens, six of them being structurally equivalent primary, and the other two being secondary
Describe the Electromagnetic spectrum. Which waves have most/least energy? List the colors in the visible spectrum from weakest to strongest.
If I have a 30,000 mL container that holds 65 moles of gas at a temperature of 205 degrees Celsius, what is the pressure inside the container?
Answer:
85.384 atm or 64608.13086 mmHg
Explanation:
PV= NRT
P= NRT/V
n= mols
R= gas constant (i used .0821 for atm)
T= Temp in Kelvins (Celsius degrees + 273)
V= in L
(65molsx480kx.0821)/30L
2 points
Al + HCI—_AICI:
+_H2
Synthesis
Decomposition
Single Replacement
Double Replacement
Combustion
Complete Symbols
Find each of these:
a) number of protons
b) number of neutrons
c) number of electrons
d) atomic number
e) mass Number
80Br35
Answer: a) 35 , b) 45 , c) 35 , d) 35 , e) 80
Explanation:
a) - protons equal to atomic number of element , b) - subtract atomic number by number of protons to get neutrons (80 - 35 = 45) , c) - protons same as electrons unless its an ion , d) - atomic number is equal to protons , e) - protons plus neutrons equal mass number (35 + 45 = 80). :)
Explain why Ra is larger than Be. With 2 points.
Explanation:
Radium(Ra)=>atomic number=88
BERYLLIUM (Be)=>atomic number =4
why is Ra larger than Be
1. since the atomic number of Ra is greater than Be, the number of electrons is more, which means there are more number of shells present in Ra than Be. (atomic Radius)2. the more the valence electron (excluding fully filled ones) the less is the nuclear attraction forcesince Ra has more valence electron in its outermost shell, the nuclear attraction force is less which means that Ra 's size is greater than Be.hope it helps:)
Can one mole of peas fit inside your house? List the materials and steps of an experiment that answers the
question without actually filling up your house with peas!
Answer:
No.
Explanation:
No, one mole of peas do not fit inside a house because one mole is equals to 6.022 × 10²³ units which is a very large value. mole only use for atoms, ions and molecules etc due to very small size but mole is not used for big sized materials such as peas and other vegetables etc. So that's why we can conclude that one mole of peas did not fit inside a house.
Which particles are referred to as nucleons (subatomic particles located in the nucleus)?
Answer:
protons and neutrons
Explanation:
The protons have a positive electrical charge and the neutrons have no electrical charge. A third type of subatomic particle, electrons, move around the nucleus. The electrons have a negative electrical charge
What THREE organisms use photosynthesis?
Answer:
Plants, bacteria, and algae
Explanation: Plants are known to gather food from the sun, algae is a type of plant, and bacteria gather food from the sun while they are in the air.
Given the reaction: 4Al + 302 --> 2AI2O3
How many moles of Aluminum oxide do you have if you have 6 moles of AI?
A
6: moles
B: 2 moles
C: 3 moles
D: 12 moles
Answer:
B: 2 moles
Explanation:
that my answer I got i think its correct
True or false. When an area within an atom is crowded with electrons it is known as a dipole "moment False True
Answer:true
Explanation:
Answer:
im not sure but ill say false
Explanation:
______________- the layers of soil. More mature (older) soils have more of these layers
fill in the blank please
I am not sure why your teacher isn't asking for the layers, but here is the list of layers;
A -(topsoil) Mostly minerals from parent material with organic matter incorporated. A good material for plants and other organisms to live.
E - (eluviated) - Leached of clay, minerals, and organic matter, leaving a concentration of sand and silt particles of quartz or other resistant materials – missing in some soils but often found in older soils and forest soils.
B - (subsoil) Rich in minerals that leached (moved down) from the A or E horizons and accumulated here.
C - (parent material) The deposit at Earth’s surface from which the soil developed.
R - (bedrock) A mass of rock such as granite, basalt, quartzite, limestone or sandstone that forms the parent material for some soils – if the bedrock is close enough to the surface to weather. This is not soil and is located under the C horizon.
In a solid, the particles..
A. Vibrate in place
B. Overcome the strong attraction
C. Slide past one another
D. Move freely
Why is it so important to use more than just fossil fuels for our energy sources?
Answer:
Fossil fuels are non-renewable which means that they wont last forever and they contribute largely to unnatural climate change.
Explanation:
Write the names of the following covalent compounds: no2
Answer:
nitrogen dioxide
Explanation:
this was on my chemistry test
How many molecules of H,0 can be produced from 0.918 mol NO, according to the balanced equation?
4NH3+6NO --> 5N + 6H2O
How many moles of Ba(NO3)2 are there in 0.25 L of a 2.00 M Ba(NO3)2 solution?
Use Molarity equals StartFraction moles of solute over liters of solution EndFraction..
0.13 mol
0.50 mol
2.25 mol
8.0 mol
Answer:
0.5moles
Explanation:
Given parameters:
Volume of solution= 0.25L
Molarity of solution = 2.00M
Unknown:
Number of moles = ?
Solution:
To solve this problem;
Molarity is the number of moles of solute in a given volume of solution, so
Number of moles = molarity x volume
Now insert the parameters and solve;
Number of moles = 0.25 x 2 = 0.5moles
Answer:
b
Explanation:
got it right on test
Calculate the mass of 1.25 mol ammonium sulfide, (NH4)2S. *
Answer:
85g
Explanation:
To convert the moles of a substance to grams we need to know the molar mass of the substance. We, as first, must obtain the molar mass of (NH₄)₂S as follows:
There are 2 atoms of N, 8 of H and 1 of S:
N = 2*14g/mol = 28g/mol
H = 8*1g/mol = 8g/mol
S = 1*32g/mol = 32g/mol
Molar mass: 68g/mol
That means 1 mole of (NH₄)₂S has a mass of 68g.
1.25moles have a mass of:
1.25moles * (68g/mol) =
85gElena makes the table below to determine the number of atoms of each element in the chemical formula 3(NH4)2SO4. A table with 3 columns and 4 rows. The first column labeled element has entries nitrogen, hydrogen, sulfur, oxygen. The second column labeled calculation has entries 1 times 2 times 3 , 4 times 2 times 3, 1 times 4 times 3, 4 times 3. The third column labeled total atoms has entries 6, 24, 12, 12. What mistake did Elena make? She should not have multiplied the sulfur atoms by the subscript 4. She should not have multiplied the nitrogen atoms by the subscript 2. She should not have multiplied the oxygen atoms by the coefficient 3. She should not have multiplied the hydrogen atoms by the coefficient 3.
Answer:
c
Explanation:
because i got 100 on the quiz
Answer: A) She should not have multiplied the sulfur atoms by the subscript 4
Explanation: got an 100 on the quiz:)
The name for the ionic compound CoHPO4
Answer:
Dicalcium phosphate. (I'm sure meant for the "o" to be an "a" for Calcium).
Explanation:
I hope this helps! :D Have a nice night!
Which chemicals are reactants?
0: NH₃ + 0 02
0:02 0: N2 + 0:420
A. NH3 and O2
B. O, and H2O
C. N, and H2O
D. NH3 and N2
Match each type of mass movement to its description.
the rapid downhill flow of a mixture of rock,
soil, and water
slump
mudflow
the slow downhill movement of rock and soil
creep
the rapid downhill movement of a mass of
rock, debris, or soil
landslide
a loosely connected mass of rock and soil
that moves a short distance
Answer: np
Explanation:
Correctly matched are :
landside - rapid movement of rock, debris, and soil. mudflow - mixture of rocks, soil, water. slump - loosely mass of rocks and soil.What is a landslide?A landslide is also called a land slip. It refers to several forms of mass wasting and may include a wide range of ground movements. They occur in a variety of environments characterize by gentle and steep slope gradients.
The mudflow is a mixture of rocks and soil along with water. While a creep is a slow downloads movement of rocks and soil.
Find out more information about the mass movement.
brainly.com/question/6068732
Worth 40 Points❤ 10th grade chemistry
Answer:
FEGACBDExplanation:
Those are the answers in order, BUT the Goldstein and Rutherford ones are confusing me because Rutherford discovered protons and the nuclear atom. Through my research I also noticed that Goldstein contributed to the discovery of the protons made Rutherford, so I listed him as the one who discovered the proton.
I hope this helps! Have a wonderful night! :D
PLEASE HELP CHEMITRY!
What happens to the binding energy of lighter elements when they undergo fusion?
What is the most stable nucleus (the one with the highest binding energy)?
What happens to the binding energy of elements like uranium when they undergo fission?
Why does the fusion of elements beyond iron in our universe require a supernova? Use this diagram to explain your answer.
Answer:
.
Explanation:
Answer:
1) In fusion reactions, two light atomic nuclei fuse together to form a heavier nucleus. In doing so, they release a comparatively large amount of energy that arises from the binding energy, creating an increase in temperature of the reactants.
2) iron-56
3) When a large, fissile atomic nucleus such as uranium-235 or plutonium-239 absorbs a neutron, it may undergo nuclear fission. However, one neutron does collide with an atom of uranium-235, which then splits and releases two neutrons and more binding energy.
4) Iron cannot release energy by fusion because it requires a larger input of energy than it releases. This energy blows the outer layers of the star off into space in a giant explosion called a supernova (plural: supernovae.)
have you tried G o o g l e
calculate the percentage of iron in iron (III) sulphate
Answer:
28.01 percent
Explanation:
Iron (III) sulphate, [tex]Fe_2(SO_4)_3[/tex], has 2 atoms of Fe.
One atom of Fe has a molar weight of 56. Hence, 2 atoms of Fe would have a total molar weight of 56 x 2 = 112 g/mol
Molar weight of [tex]Fe_2(SO_4)_3[/tex] = 399.88 g/mol
Percentage Fe in [tex]Fe_2(SO_4)_3[/tex] = 112/399.88 x 100%
= 28.01%
The percentage of iron is iron (III) sulphate is, therefore, 28.01 percent.
the pH of a solution of a is increased from 2 to 3 then the concentration of h + ions will become
Answer:
The H+ concentration would decrease by 10 fold. From .01 to .001
Explanation:
This is due to how a pH of 2 is expressed in scientific notation as 10^-2 power when referring to H+ concentration so a pH of 3 would be 10^-3. Hence it would be 10 times smaller in concentration as the power increases to the negative power the smaller the concentration becomes.