To arrange the elements in order of increasing ionization energy using only the periodic table, we can refer to the periodic trends. Ionization energy generally increases from left to right across a period and decreases from top to bottom within a group.
The elements provided are tin (Sn), tellurium (Te), iodine (I), and rubidium (Rb).
Rubidium (Rb) is in Group 1 (alkali metals) and is located at the far left of the periodic table. Alkali metals have the lowest ionization energies in their respective periods because their valence electrons are farther away from the nucleus and experience less attraction. Therefore, Rb will have the lowest ionization energy among the given elements.
Tin (Sn) is in Group 14 (carbon group) and is located to the left of tellurium (Te). As we move across Group 14 from left to right, the ionization energy generally increases due to increasing effective nuclear charge. So, Sn will have a higher ionization energy than Rb but lower than Te and iodine (I).
Tellurium (Te) is in Group 16 (chalcogens) and is located to the right of Sn. Chalcogens have higher ionization energies than elements in Group 14. Therefore, Te will have a higher ionization energy than Sn and Rb.
Iodine (I) is in Group 17 (halogens) and is located to the right of Te. Halogens have the highest ionization energies within their periods due to their strong electron-electron repulsion. Thus, I will have the highest ionization energy among the given elements.
Based on this analysis, the elements arranged in order of increasing ionization energy are:
Rubidium (Rb) < Tin (Sn) < Tellurium (Te) < Iodine (I)
In summary, ionization energy generally increases from left to right across a period and decreases from top to bottom within a group on the periodic table. Using this trend, we can arrange the given elements in the specified order.
To know more about ionization energy, click here:-
https://brainly.com/question/28385102
#SPJ11
7. HCIO (aq) + NO (g) → C1¹ (aq) + HNO2 (aq) (acidic solution)
The reaction between HCIO (aq) and NO (g) in an acidic solution produces C1 ⁻(aq) and HNO₂(aq).
This chemical equation represents a reaction between hydrochlorous acid (HCIO) in aqueous form and nitrogen monoxide (NO) in gaseous form, occurring in an acidic solution. The products of this reaction are C1⁻(chlorine ion) in aqueous form and nitrous acid (HNO₂) in aqueous form.In more detail, hydrochlorous acid (HCIO) is a weak acid that dissociates in water to form H+ ions and CIO- ions. On the other hand, nitrogen monoxide (NO) is a free radical gas. When the two substances come into contact in an acidic solution, they undergo a redox reaction.
During the reaction, the HCIO molecules donate H+ ions to the NO molecules, resulting in the formation of HNO2 (nitrous acid) and C1⁻ (chlorine ion). The chlorine ion is derived from the CIO⁻ ion present in HCIO, while the nitrous acid is formed when NO accepts the H⁺ion.This reaction is characteristic of an acidic environment, as the presence of excess H⁺ ions facilitates the proton transfer between the reactants. It is important to note that the reaction may proceed differently in other environments, such as basic or neutral solutions, due to variations in the concentration of H⁺ ions.
Learn more about: Redox reaction
brainly.com/question/28300253
#SPJ11
Reversible processes are not possible to be achieved in most practical applications. However, they form an important part of the thermodynamics' subject. Briefly explain two (3) reasons why the analysis of reversible processes is useful in thermodynamics.
please do neatly and it in 20 minutes its urgent
Reversible processes are an important part of thermodynamics, despite not being possible to achieve in most practical applications. The following are three reasons why the analysis of reversible processes is useful in thermodynamics:1.
Reversible processes help in determining the maximum efficiency:If a reversible process can be accomplished, it provides information about the maximum efficiency of a cycle. The maximum possible efficiency of a cycle is given by the ratio of the heat input to the heat output.2. Reversible processes help in determining the actual efficiency:If an irreversible process can be modelled as a reversible process, it can be used to calculate the actual efficiency of the cycle. The actual efficiency is always lower than the maximum possible efficiency.
Reversible processes are used to model real-life processes:Although reversible processes are idealized processes, they can be used to model real-life processes. The analysis of reversible processes allows for an understanding of the thermodynamic principles that govern real-life processes. Furthermore, reversible processes provide a useful starting point for the development of more complex models. These models can then be used to design and optimize real-world processes.Long answer is required to elaborate on the above mentioned points.
To know more about efficiency visit:-
https://brainly.com/question/31458903
#SPJ11
Calculate the Kf of nitrobenzene, whose freezing point is 5.7°C and whose molar enthalpy of fusion is 11.59kJ · mol-¹.
The cryoscopic constant (Kf) of nitrobenzene is 5.7 K·kg/mol.
To calculate the cryoscopic constant (Kf) of nitrobenzene, we can use the formula:
ΔT = Kf * m * i
where ΔT is the freezing point depression, m is the molality of the solution, and i is the van't Hoff factor. In this case, we are considering pure nitrobenzene, so the van't Hoff factor is 1.
Given that the freezing point depression (ΔT) of nitrobenzene is 5.7°C and the molar enthalpy of fusion (ΔHfus) is 11.59 kJ/mol, we need to convert the temperature to Kelvin (K) and the enthalpy to joules (J):
ΔT = 5.7°C = 5.7 K
ΔHfus = 11.59 kJ/mol = 11.59 * 10³ J/mol
Now, rearranging the formula, we can solve for Kf:
Kf = ΔT / (m * i)
Since we are considering pure nitrobenzene, the molality (m) will be 1 mol/kg.
Kf = (5.7 K) / (1 mol/kg * 1)
Therefore, the cryoscopic constant (Kf) of nitrobenzene is 5.7 K·kg/mol.
Learn more about nitrobenzene here:
https://brainly.com/question/31276962
#SPJ11
Unanswered Question Homework unawered H₂10 Cr-10; + Cr² Match the following for the above reaction Drage on the right-b What is being oxidized? What is being reduced? Cding Apent Oxidation half rea
According to the given reaction, (a) chromium is being oxidized, (b) hydrogen is being reduced, (c) the oxidizing agent is H₂CrO₁₀, (d) the reducing agent is H₂, (e) the oxidation half reaction is : Cr₂Oₓ + 14H+ + 6e- → 2Cr²+ + 7H₂O and the reduction half reaction is : 2H₂ → 4H+ + 4e-
(a) In the reaction H₂CrO₁₀ → Cr₂ + H₂O, the chromium is being oxidized. In the reactant, chromium has an oxidation state of +6, but in the product, it has an oxidation state of +2. This means that the chromium atom has lost electrons, which is what oxidation is.
(b) The hydrogen is being reduced. In the reactant, hydrogen has an oxidation state of +1, but in the product, it has an oxidation state of 0. This means that the hydrogen atom has gained electrons, which is what reduction is.
(c) The oxidizing agent is the substance that causes the oxidation of another substance. In this reaction, the oxidizing agent is H₂CrO₁₀.
(d) The reducing agent is the substance that causes the reduction of another substance. In this reaction, the reducing agent is H₂.
(e) The oxidation half reaction is the part of the reaction where oxidation occurs. In this reaction, the oxidation half reaction is:
Cr₂Oₓ + 14H+ + 6e- → 2Cr²+ + 7H₂O
Reduction half reaction
The reduction half reaction is the part of the reaction where reduction occurs. In this reaction, the reduction half reaction is:
2H₂ → 4H+ + 4e-
Thus, according to the given reaction, (a) chromium is being oxidized, (b) hydrogen is being reduced, (c) the oxidizing agent is H₂CrO₁₀, (d) the reducing agent is H₂, (e) the oxidation half reaction is : Cr₂Oₓ + 14H+ + 6e- → 2Cr²+ + 7H₂O and the reduction half reaction is : 2H₂ → 4H+ + 4e-
To learn more about oxidising agent :
https://brainly.com/question/14041413
#SPJ11
In which of the following reactions is Keq independent of the
pressure?
a. none of the above
b. CaCO 3( s) CaO( s) + CO 2( g)
c. 2CO( g) + O 2( g) 2CO 2( g)
d. I 2( g) + H 2( g) 2HI( g)
e. N 2( g) + 3
The Keq is independent of the pressure in the reaction represented by the equation c) 2CO(g) + O₂(g) ⇌ 2CO₂(g). Hence, the correct answer is option c).
For the reaction, aA + bB ⇌ cC + dD,
[tex]Keq = [C]^c[D]^d/[A]^a[B]^b[/tex] where [X] denotes the concentration of X. The concentration is given by [X] = n/V where n is the number of moles of X and V is the volume of the container. In the case of gases, we use the partial pressure instead of concentration.
The partial pressure of X is given by pX = nX*RT/V where nX is the number of moles of X and R is the universal gas constant. When the volume of the container is changed, the partial pressure of each gas changes, but the Keq remains the same.
This is because the reaction quotient Q changes in the same way as Keq when the concentrations or partial pressures change.
Therefore, the Keq is independent of the pressure in the reaction represented by the equation 2CO(g) + O₂(g) ⇌ 2CO₂(g).
To know more about Keq, refer
https://brainly.com/question/10048949
#SPJ11
need help !
Write the equation for each of the following. (Enter your answers in the form ^x.) Z chemPad Help XX (a) alpha decay of (b) beta decay of 238 92 U 151 60 Nd chemPad XoXº Greek Help Greek 4
Alpha decay of 23892 U can be represented by the following equation:
^23892 U ⟶ ^4 2 He + ^234 90 ThBeta decay of 15160 Nd can be represented by the following equation:
^15160 Nd ⟶ ^0-1 e + ^151 61 PmIn alpha decay, the atomic number and mass number of the parent nuclide decrease by 2 and 4, respectively. On the other hand, in beta decay, the atomic number of the parent nuclide increases by 1, while its mass number remains constant.
Therefore, the equations for alpha decay of 23892 U and beta decay of 15160 Nd are:
^23892 U ⟶ ^4 2 He + ^234 90 Th (alpha decay)^15160 Nd ⟶ ^0-1 e + ^151 61 Pm (beta decay)
In beta decay, a beta particle (either an electron or a positron) is emitted from the nucleus. Here, I assume the emission is an electron (^0_-1e). The original nuclide (^151_60Nd) transforms into a new nuclide (^151_61Pm) through this beta decay process.
To know more about Alpha decay visit:
https://brainly.com/question/27870937
#SPJ11
raw the skeletal ("line") structure of a carboxylic acid with 4 carbons in the main chain and 2 methyl group substituents.
The skeletal structure of 2,2-dimethylbutanoic acid is Skeletal structure of 2,2-dimethylbutanoic acid.
A carboxylic acid has the functional group –COOH, where a carbonyl carbon is bonded to a hydroxyl group and an alkyl or aryl group. It is represented by the formula RCOOH. A carboxylic acid that has a four-carbon chain and two methyl group substituents can be named 2,2-dimethylbutanoic acid or pivalic acid. It has the structure shown below: Structure of 2,2-dimethylbutanoic acid.
The skeletal structure of a carboxylic acid is represented as a line-angle structure in which carbon atoms are represented by corners and lines represent the covalent bonds. A carboxylic acid is written with a double bond between carbon and oxygen atoms and a single bond between carbon and hydroxyl group. The two methyl groups (CH₃) are attached to the second carbon atom on the main chain.
Learn more about skeletal structure: https://brainly.com/question/12213587
#SPJ11
18.8 Write the IUPAC name for each carboxylic acid. ОН -СООН (a) HOOC (c) CCl₂COOH COOH (b) OH
The IUPAC names for the carboxylic acids you provided are (a) 2-hydroxypropanoic acid (b) HOOC-CHCl-COOH = 3-chloropropanoic acid and (c) CCl2-COOH = 1,1-dichloroacetic acid
The IUPAC nomenclature for carboxylic acids is as follows:
The longest carbon chain that contains the carboxyl group is identified.The -e ending of the parent alkane name is replaced with -oic acid.The substituents are named and their positions are indicated by numbers.The substituents are listed in alphabetical order.(a) The longest carbon chain is propanoic acid, and the substituent is a hydroxy group. The hydroxy group is located on carbon 2, so the IUPAC name is 2-hydroxypropanoic acid.
(b) The longest carbon chain is propanoic acid, and the substituent is a chlorine atom. The chlorine atom is located on carbon 3, so the IUPAC name is 3-chloropropanoic acid.
(c) The longest carbon chain is acetic acid, and there are two chlorine atoms. The chlorine atoms are located on carbons 1 and 1, so the IUPAC name is 1,1-dichloroacetic acid.
Thus, the IUPAC names for the carboxylic acids you provided are (a) 2-hydroxypropanoic acid (b) HOOC-CHCl-COOH = 3-chloropropanoic acid and (c) CCl2-COOH = 1,1-dichloroacetic acid
To learn more about carboxylic acids :
https://brainly.com/question/26855500
#SPJ11
In a steady flow combustor, H2 gas (fuel) enters at 25 C and 100 kPa, and is oxidized by O2 gas, entering the combustor at 25° C and 100 kPa. The products contain only H2O (in vapor state) and H2 gas. Products leave at 2000 K and 100 kPa. The oxygen to fuel ratio by mass is,
O 1.9
O 1.7
O 1.5
O 1.3
O 1.0
The chemical equation for the combustion of hydrogen (H2) with oxygen (O2) is given as H2 + (1/2)O2 → H2O. This is an exothermic reaction which releases heat and produces H2O as products.In a steady flow combustor, the fuel is H2 gas which enters the combustor at 25 °C and 100 kPa.The oxygen to fuel ratio by mass is O 1.0. The correct option is (E).
The oxidant is O2 gas which enters the combustor at 25 °C and 100 kPa. The products of the combustion reaction contain H2O (in vapor state) and H2 gas. The products leave the combustor at 2000 K and 100 kPa.The oxygen to fuel ratio by mass is given as follows:Let the mass of H2 be mH2, and the mass of O2 be mO2. Then the mass of the products of combustion would be mH2O and mH2.The balanced chemical equation for the combustion of H2 with O2 is: H2 + (1/2)O2 → H2O1 mol of H2 requires 0.5 mol of O2 for combustion.
Therefore, mO2/mH2 = 0.5/1 = 0.5mO2 = 0.5 × mH2We know that the mass of the products of combustion is equal to the mass of H2 and H2O produced. Therefore,mH2 + mH2O = (mass of fuel + mass of oxygen) = (mH2 + mO2)The molar mass of H2 is 2 g/mol, and the molar mass of O2 is 32 g/mol.
Therefore, mH2 = 2 × nH2, and mO2 = 32 × nO2. Here, nH2 and nO2 are the number of moles of H2 and O2 present in the combustor respectively.
Substituting these values in the above equation,
mH2 + mH2O = mH2 + 0.5 × mH2/32or mH2O = 0.03125 × mH2
Substituting mH2O and mO2 in terms of mH2 in the oxygen to fuel ratio,mO2/mH2 = 0.5 × mH2/mH2 = 0.5.
To know more about combustion visit:-
https://brainly.com/question/15117038
#SPJ11
4
.(b). You are given the starting materials of
PPh3, NH3, and [PtCl4]2-. Illustrate the efficient routes to
synthesise both cis- and
trans-[PtCl2(NH3)(PPh3)].
(16 marks)
The efficient routes to synthesize both cis- and trans-[PtCl2(NH3)(PPh3)] can be achieved by reacting PPh3, NH3, and [PtCl4]2-. These reactions involve ligand exchange and coordination processes to form the desired products.
To synthesize cis-[PtCl2(NH3)(PPh3)], we can follow the following step-by-step procedure:
1. Start by reacting PPh3 with [PtCl4]2- to form [PtCl2(PPh3)2].
2. Then, add NH3 to the above solution and reflux it to promote ligand exchange. This leads to the substitution of two PPh3 ligands with two NH3 ligands, resulting in the formation of cis-[PtCl2(NH3)2(PPh3)].
3. Finally, react cis-[PtCl2(NH3)2(PPh3)] with hydrochloric acid (HCl) to remove one NH3 ligand and form cis-[PtCl2(NH3)(PPh3)].
To synthesize trans-[PtCl2(NH3)(PPh3)], the following steps can be followed:
1. Begin by reacting PPh3 with [PtCl4]2- to obtain [PtCl2(PPh3)2].
2. Add NH3 to the above solution and reflux it to promote ligand exchange. This results in the substitution of two PPh3 ligands with two NH3 ligands, forming trans-[PtCl2(NH3)2(PPh3)].
3. Finally, treat trans-[PtCl2(NH3)2(PPh3)] with silver nitrate (AgNO3) to induce an anion exchange reaction. This leads to the replacement of one NH3 ligand with a chloride ion (Cl-), resulting in the formation of trans-[PtCl2(NH3)(PPh3)].
Overall, these step-by-step procedures outline the efficient routes for synthesizing both cis- and trans-[PtCl2(NH3)(PPh3)] by employing ligand exchange and coordination reactions.
To know more about cis- and trans click here:
https://brainly.com/question/32197586
#SPJ11
Biological macro-molecules are polymers that are formed when ____ are joined by a ____ reaction.
Group of answer choices
- Monomers; hydrolysis
- Subunits; reduction
- Multimers; dehydration
- Monomers; dehydration
The correct option is d) Monomers; dehydration, Biological macromolecules are formed when monomers are joined by a dehydration reaction.
Biological macromolecules are polymers, which are large molecules made up of repeating units called monomers. The monomers are joined together by a dehydration reaction, which is a type of chemical reaction that removes water molecules. In a dehydration reaction, two monomers share electrons to form a covalent bond, and a water molecule is released as a byproduct.
For example, the sugar glucose is a monomer that can be polymerized to form the disaccharide maltose. In the dehydration reaction that forms maltose, two glucose molecules share electrons to form a covalent bond, and a water molecule is released.
glucose + glucose <=> maltose + H2O
Biological macromolecules are polymers that are formed when monomers are joined together by a dehydration reaction. This reaction removes water molecules and forms a covalent bond between the monomers. Dehydration reactions are essential for the formation of all biological macromolecules, including carbohydrates, proteins, lipids, and nucleic acids.
Learn more about macro-molecules here:
https://brainly.com/question/2456851
#SPJ11
The apparatus shown can be used to compare the amount of energy given out by different fuels. The shields and lid are used to limit loss of... what?
The shields and lid in the apparatus are used to limit the loss of heat energy. When comparing the amount of energy given out by different fuels.
The shields and lid in the apparatus are used to limit the loss of heat energy. When comparing the amount of energy given out by different fuels, it is essential to minimize any external influences or energy losses that could affect the accuracy of the measurements.
The shields surrounding the apparatus serve as insulators, reducing heat transfer between the system and its surroundings. By minimizing heat loss to the environment, the shields help maintain a more controlled and isolated environment, ensuring that the energy released by the fuels is primarily measured and accounted for within the apparatus.
The lid further aids in limiting heat loss by covering the top of the apparatus. It helps trap the heat generated during fuel combustion and prevents it from escaping through the opening. By keeping the heat contained within the system, the lid minimizes the loss of energy to the surrounding environment.
Overall, the shields and lid work together to minimize the loss of heat energy, allowing for a more accurate comparison of the energy given out by different fuels.
For more question on heat energy
https://brainly.com/question/19666326
#SPJ8
A 0.026 mº tank contains 0.083 kg of Nitrogen gas (N) at a pressure of 2.87 atm. Find the temperature of the gas in °C. Take the atomic weight of nitrogen to be N= 28 g/mol Number: "C
The temperature (in °C ) of the gas in the 0.026 m³ tank that contains 0.083 kg of Nitrogen gas is 34.06 °C
How do i determine the temperature?The temperature of the gas can be obtained as follow:
Mass of gas, N₂ (m) = 0.083 Kg = 0.083 × 1000 = 83 gMolar mass of gas, N₂ (M) = 28 g/molMole of gas (n) = m / M = 83 / 28 = 2.96 molesPressure (P) = 2.87 atmVolume of gas (V) = 0.026 m³ = 0.026 × 1000 = 26 LGas constant (R) = 0.0821 atm.L/mol KTemperature (T) =?PV = nRT
Inputting the given parameters, we have
2.87 × 26 = 2.96 × 0.0821 × T
Divide both sides by (2.96 × 0.0821)
T = (2.87 × 26) / (2.96 × 0.0821)
= 307.06 K
Subtract 273 to obtain answer in °C
= 307.06 - 273 K
= 34.06 °C
Thus, the temperature of the gas, N₂ is 34.06 °C
Learn more about temperature:
https://brainly.com/question/23058797
#SPJ4
Complete question:
A 0.026 m³ tank contains 0.083 kg of Nitrogen gas (N₂) at a pressure of 2.87 atm. Find the temperature of the gas in °C.
Take the atomic weight of nitrogen to be N₂ = 28 g/mol
Number = _°C
The following ionic equation (not balanced) represents the
reaction that occurs when aqueous solutions of ammonium sulfate and
silver(I) acetate are combined. Identify the spectators ions in the
equat
The given ionic equation (not balanced) represents the reaction that occurs when aqueous solutions of ammonium sulfate and silver(I) acetate are combined and the spectators ions in the equation are:
Spectator ions are the ions that are present on both sides of the equation and does not participate in the reaction. These ions appear the same way in the reactant and product side, so they cancel out when we write the net ionic equation.The chemical equation is given by :
[tex]$\ce{ (NH4)2SO4(aq) + 2AgC2H3O2(aq) -> 2NH4C2H3O2(aq) + Ag2SO4(s)}$[/tex]
The chemical equation shows the reaction of aqueous ammonium sulfate and aqueous silver(I) acetate that gives aqueous ammonium acetate and silver(I) sulfate as solid precipitate respectively.The spectator ions present in the equation are:
[tex]$\ce{2 NH4+(aq)}$ and $\ce{2 C2H3O2-(aq)}$[/tex]
To know more about reactant , visit;
https://brainly.com/question/6421464
#SPJ11
4 5 3 2 1000 6 5 points Consider the equation: 2A+ 3B->2C AGO (A) 51.09 kJ/mol AGO (B)=-205.70 kJ/mol AGO (C)-71.68kJ/mol Calcualte AGº for this reaction at 298K in kJ. Report your answer with 2 plac
The given chemical equation is 2A + 3B -> 2C. The standard free energy of reaction is a measure of the maximum work that the reaction can do; therefore, the reaction will be spontaneous if the free energy change is negative.
The standard free energy change for a reaction can be calculated from the standard free energies of formation of the reactants and products using Hess’s law.
The formula for calculating the standard free energy of a reaction is as follows:ΔG°rxn = ΣnΔG°f (products) - ΣmΔG°f (reactants)where,ΔG°rxn = the standard free energy change for the reactionΔG°f = the standard free energy of formationn = the number of moles of productsm = the number of moles of reactants Given, AG° (A) = 51.09 kJ/molAG° (B) = -205.70 kJ/mol AG° (C) = -71.68 kJ/mol The balanced chemical equation for the reaction is,2A + 3B -> 2CThis indicates:
that,Δn = (2 × nC) - (2 × nA + 3 × nB) = (2 × (-71.68 kJ/mol)) - [2 × (51.09 kJ/mol) + 3 × (-205.70 kJ/mol)]Δn = - 55.05 kJ/molTherefore,ΔG°rxn = (2 × AG°f (C)) - (2 × AG°f (A)) - (3 × AG°f (B))= (2 × (-71.68 kJ/mol)) - (2 × 51.09 kJ/mol) - (3 × (-205.70 kJ/mol))= - 26.56 kJ/molThe standard free energy change for the given reaction is -26.56 kJ/mol at 298K. Thus, the answer is -26.56 kJ/mol.
To know more about chemical visit:
https://brainly.com/question/29240183
#SPJ11
Rohit and Ramon are best friends they study in class VI. One day they were playing in the school
on sand. Suddenly Raman asked to Rohit if we mixed salt in sand then how will you separate the
mixture of sand and sold Rohit was quite intelligent so he immediately explained the method of
separation.
Read the passage carefully and answer the following questions:
a. How is a mixture of sand and salt is separated?
b. Name the method
c .which are applicable in the separation of this mixture?
( Can we can separate sand and salt with the help of sieve from sieving method )
( Please answer it correctly )
a. The mixture of sand and salt can be separated by dissolving the salt in water and then filtering the mixture.
b. The method used is dissolution and filtration.
c. Filtration is applicable in the separation of the sand and salt mixture. Sieving method is not suitable for this particular mixture as both sand and salt particles would pass through the sieve.
a. A mixture of sand and salt can be separated by the process of filtration. Filtration is a method used to separate solid particles from a liquid or a mixture by passing it through a porous medium, such as filter paper or a filter funnel. In this case, a filter paper or a filter funnel can be used to separate the sand and salt mixture. The sand particles being larger in size are retained on the filter paper, while the salt, being a soluble substance, passes through the filter and gets collected in the filtrate.
b. The method used to separate the mixture of sand and salt is called filtration.
c. Filtration is the applicable method for separating a mixture of sand and salt. Sieving method, which uses a sieve with specific-sized openings to separate particles based on size, would not be suitable in this case because both sand and salt particles are likely to pass through the sieve. Since salt is soluble in water, filtration is preferred as it allows for the separation of sand (insoluble) and salt (soluble) by using the solvent property of water to dissolve and carry away the salt while retaining the sand particles.
Know more about Filtration here:
https://brainly.com/question/23945157
#SPJ8
Which of the following reactions represents the standard enthalpy of formation, AH, for methane gas, CH₂(g)? Choose one: OA. CH₂(1) CH₂(g) OB. 2C (s.graphite) + 4H₂(g) → 2CH₂(g) C. C(
The reaction that represents the standard enthalpy of formation (ΔH°f) for methane gas, CH₄(g), is Option C: C(graphite) + 2H₂(g) → CH₄(g). This equation correctly shows the formation of methane from its constituent elements under standard conditions.
The standard enthalpy of formation (ΔH°f) represents the enthalpy change when one mole of a compound is formed from its constituent elements in their standard states. In the case of methane, it is formed from carbon (C) in the form of graphite and hydrogen gas (H₂).
The balanced equation for the formation of methane can be written as:
C(graphite) + 2H₂(g) → CH₄(g)
This equation correctly represents the formation of methane gas (CH₄) by combining carbon in the form of graphite (C) with two moles of hydrogen gas (H₂). It is important to note that the coefficients in the balanced equation correspond to the stoichiometric ratios of the reaction.
Option A (CH₂(1) → CH₂(g)) does not represent the formation of methane from its elements but rather the vaporization of a hypothetical compound CH₂.
Option B (2C(s.graphite) + 4H₂(g) → 2CH₂(g)) contains an incorrect stoichiometric coefficient for the formation of methane. The correct stoichiometric ratio should be one mole of carbon reacting with two moles of hydrogen gas to form one mole of methane.
Therefore, Option C (C(graphite) + 2H₂(g) → CH₄(g)) is the correct reaction that represents the standard enthalpy of formation (ΔH°f) for methane gas, CH₄(g).
Learn more about enthalpy
https://brainly.com/question/30431725
#SPJ11
How many liters of a 1.35 MNaCl solution will provide 20.3 g of
NaCl ? Express your answer with the appropriate units.
To provide 20.3 g of NaCl, you would need 15.04 L of a 1.35 M concentration of NaCl solution.
To calculate the volume of the NaCl solution needed, we can use the formula:
Volume (L) = Mass (g) / Concentration (Molarity) x Molar Mass (g/mol) / 1000
Given:
Mass of NaCl is given
Mass of NaCl = 20.3 g
Concentration of NaCl solution = 1.35 M (Molarity)
The molar mass of NaCl is 58.44 g/mol.
Substituting the values into the formula, we get:
Volume can be determined as:
Volume (L) = 20.3 g / (1.35 mol/L) x (58.44 g/mol) / 1000
= 15.04 L
Therefore, you would need 15.04 L of a 1.35 M NaCl solution to provide 20.3 g of NaCl.
To know more about concentration visit:
https://brainly.com/question/26255204
#SPJ11
Technetium-99 is a gamma emitter with a half-life of 6 hours. It is used for imaging of heart function. A patient receives an injection containing 12 mg of Technetium-99 at 6:00 a.m. on Tuesday. How much remains at 9:00 p.m. the next day.
Approximately 2.063 mg of Technetium-99 remains at 9:00 p.m. on Wednesday. Since Technetium-99 is a gamma emitter with a half-life of 6 hours, that means that every 6 hours the amount of the substance is reduced by half.
Since 15 hours (from 6:00 a.m. on Tuesday to 9:00 p.m. on Wednesday) have elapsed, there are 2 and a half half-lives in that time period. Let's check,6:00 a.m. on Tuesday to 12:00 p.m. on Tuesday: 6 hours (1 half-life)12:00 p.m. on Tuesday to 6:00 p.m. on Wednesday: 30 hours (5 half-lives)6:00 p.m. on Wednesday to 9:00 p.m. on Wednesday: 3 hours (0.5 half-lives)
Total number of half-lives that have passed = 1 + 5 + 0.5 = 6.5Now we can use the half-life formula to determine the amount of Technetium-99 that remains. The formula is given as: N(t) = N₀(1/2)ᵗ/h Where N(t) is the amount of the substance remaining after time tN₀ is the initial amount of the substance
h is the half-life of the substanceᵗ is the time that has passed since the initial amount was given
Putting in the given values, N(6.5) = 12 mg (1/2)⁶.⁵/6N(6.5) = 2.063 mg (approx.)
Therefore, approximately 2.063 mg of Technetium-99 remains at 9:00 p.m. on Wednesday.
To know more about Technetium-99, refer
https://brainly.com/question/32886681
#SPJ11
Finding the Simplest Formula 1. Mass of empty crucible + cover whitel magnesium Ribbon 20.61
g 2. Initial appearance of the magnesium 0.33
White/ magnesium Ribbon
g 4. Mass of crucible + cover + oxide product g Calculations 5. Mass of magnesium g 6. Mass of magnesium compound g 7. Mass of oxygen in the product g 8. Moles of Mg mole 9. Moles of O (Show calculations.) mole 10. Which number of moles (Mg or O) is smaller
The experiment involves finding the simplest formula. The mass of the empty crucible is 20.61 g while the white magnesium ribbon is 0.33 g. The magnesium ribbon is heated till it turns into a white magnesium oxide product.
The mass of the crucible, cover, and the oxide product is determined. The mass of the magnesium ribbon is found by calculating the difference between the mass of the empty crucible and the magnesium ribbon and is found to be 0.33 g.
The mass of the magnesium compound is calculated by calculating the difference between the mass of the crucible, cover, and oxide product and the mass of the empty crucible and the magnesium ribbon. The mass of the magnesium compound is found to be 1.
To know more about experiment visit:
https://brainly.com/question/15088897
#SPJ11
Which compounds will provide a broad IR signal
centered around 2900-3000 cm-1?
butanol
3,3-dimethylbutanoic acid
4-methoxyphenol
all
The compounds that can provide a broad infrared (IR) signal centered around 2900-3000 cm-1 are butanol, 3,3-dimethylbutanoic acid, and 4-methoxyphenol.
Infrared spectroscopy is a technique used to analyze the chemical composition of a substance by studying its interaction with infrared radiation. The specific range of 2900-3000 cm-1 corresponds to the region where the C-H stretching vibrations of aliphatic compounds occur.
Butanol, also known as n-butanol or 1-butanol, is a four-carbon alcohol with the molecular formula C4H9OH. It has a broad IR signal centered around 2900-3000 cm-1 due to the presence of C-H bonds in its aliphatic chain.
3,3-dimethylbutanoic acid is an organic compound with the molecular formula C6H12O2. It contains a branched aliphatic chain with two methyl groups. The compound exhibits C-H stretching vibrations in the range of 2900-3000 cm-1, resulting in a broad IR signal in that region.
4-methoxyphenol, also known as p-anisole, is an aromatic compound with the molecular formula C7H8O2. Although it is an aromatic compound, it also contains aliphatic C-H bonds in its structure, which give rise to an IR signal in the 2900-3000 cm-1 range.
In summary, butanol, 3,3-dimethylbutanoic acid, and 4-methoxyphenol are compounds that exhibit broad infrared signals centered around 2900-3000 cm-1 due to the presence of aliphatic C-H stretching vibrations in their structures.
To know more about Infrared spectroscopy click here :
https://brainly.com/question/13265448
#SPJ11
Which compound below fits the following proton NMR data? Н H A OA B Oc O-CH3 CH3 D singlet 5 3.98 (3H) quartet 8 2.14 (2H) triplet 6 1.22 (3H) CH3-CH, 0-C-CH, 22 сн CHY-O-CH2-C CH3 C в 2-CH CH3 CH
Based on the given proton NMR data, Compound C is the compound that fits the data.
Based on the proton NMR data provided, we can analyze the different signals and their corresponding splitting patterns to identify the compound.
Signal A:
- Singlet at 5.0 ppm
Signal B:
- Quartet at 8.0 ppm with a chemical shift of 2.14 (2H)
Signal C:
- Triplet at 6.0 ppm with a chemical shift of 1.22 (3H)
- CH3-CH group
Signal D:
- Singlet at 2.0 ppm with a chemical shift of 3.98 (3H)
- O-CH3 group
Based on the given proton NMR data, the compound can be identified as follows:
- Signal A (singlet at 5.0 ppm) does not match any of the other signals.
- Signal B (quartet at 8.0 ppm) has a chemical shift of 2.14 ppm, which does not match any other signals.
- Signal D (singlet at 2.0 ppm) corresponds to an O-CH3 group.
Therefore, the compound must have an O-CH3 group, which matches with Signal D.
Since Signal C (triplet at 6.0 ppm) corresponds to a CH3-CH group, and Signal D matches an O-CH3 group, the compound that fits the given proton NMR data is Compound C.
Based on the given proton NMR data, Compound C is the compound that fits the data. It exhibits a singlet at 5.0 ppm, a quartet at 8.0 ppm with a chemical shift of 2.14 (2H), a triplet at 6.0 ppm with a chemical shift of 1.22 (3H), and a singlet at 2.0 ppm with a chemical shift of 3.98 (3H). The presence of an O-CH3 group and a CH3-CH group in Compound C matches the observed signals in the proton NMR data.
To know more about proton NMR data, visit
https://brainly.com/question/30645266
#SPJ11
Atomic and Ionic Radii Select the greater of each of the following pairs of radii. The ionic radius of 0²- The ionic radius of N³- The ionic radius of Se²- The ionic radius Rb+ The covalent radius
O2- < N3-
Se2- < O2-
Rb+ < Se2-
Covalent radius < ionic radii
To determine the greater value in each pair of radii, we need to consider the trends in atomic and ionic radii across the periodic table.
Atomic radii generally increase as you move down a group in the periodic table due to the addition of more energy levels (shells) and the shielding effect of inner electrons. Conversely, atomic radii generally decrease as you move across a period from left to right due to increasing effective nuclear charge and stronger attraction between the nucleus and outer electrons.
Ionic radii are influenced by the same factors but are also affected by the gain or loss of electrons. When an atom gains electrons to form an anion (negatively charged ion), its ionic radius increases compared to its atomic radius. On the other hand, when an atom loses electrons to form a cation (positively charged ion), its ionic radius decreases compared to its atomic radius.
Comparing the pairs of radii:
The ionic radius of O2- vs. the ionic radius of N3-:
Oxygen (O) is in Group 16, and Nitrogen (N) is in Group 15 of the periodic table. Since both are negatively charged anions, the ionic radius of O2- is larger than the ionic radius of N3- due to O being lower in the periodic table.
The ionic radius of Se2- vs. the ionic radius of O2-:
Selenium (Se) is located below oxygen in Group 16. Thus, the ionic radius of Se2- is larger than the ionic radius of O2- due to Se being lower in the periodic table.
The ionic radius of Rb+ vs. the ionic radius of Se2-:
Rb+ is a cation, while Se2- is an anion. Cations are smaller than their parent atoms, so the ionic radius of Rb+ is smaller than the ionic radius of Se2-.
Covalent radius vs. ionic radii:
Covalent radii refer to the size of atoms bonded together in a covalent molecule. Generally, ionic radii are larger than covalent radii because the electrostatic attraction between ions in an ionic compound leads to larger distances between them compared to covalent bonding.
Please note that the values provided above are general trends, and the actual values may vary depending on the specific compounds and conditions involved.
Learn more about electrons at: brainly.com/question/12001116
#SPJ11
b) A load of 4000 N is applied to a titanium wire with a diameter of 0.40 cm. Compute to find out whether the wire will deform elastically or plastically and whether the wire will show necking. Given the yield strength and tensile strength of the wire is 305MPa and 360 Pa respectively. [10 marks]
The wire will deform plastically and it will show necking.
To determine whether the wire will deform elastically or plastically, we need to compare the stress applied to the wire with its yield strength.
First, let's calculate the cross-sectional area of the wire. The diameter of the wire is given as 0.40 cm, so the radius (r) can be calculated as follows:
r = 0.40 cm / 2 = 0.20 cm = 0.0020 m
The cross-sectional area (A) can be calculated using the formula for the area of a circle:
A = πr^2 = π(0.0020 m)^2 ≈ 0.00001257 m^2
Next, we can calculate the stress (σ) applied to the wire using the formula:
σ = F/A
where F is the applied load. In this case, F = 4000 N.
σ = 4000 N / 0.00001257 m^2 ≈ 318,624,641.74 Pa
The stress applied to the wire is approximately 318.62 MPa.
Comparing this stress with the yield strength of the wire (305 MPa), we can see that the stress exceeds the yield strength. Therefore, the wire will deform plastically.
To determine whether the wire will show necking, we need to compare the stress applied to the wire with its tensile strength.
The stress applied to the wire is 318.62 MPa, which is less than the tensile strength of the wire (360 MPa). Therefore, the wire will not reach its tensile strength and undergo necking.
The titanium wire will deform plastically under the applied load of 4000 N, and it will not show necking.
To know more about deform , visit:
https://brainly.com/question/31254921
#SPJ11
discuss the Biochemistry of vision, focusing on i) what part of
the brain controls eyes and how does it do that, ii) what are the
three types of cones in our eyes and what is each one’s specific
fun
i) The primary visual cortex, located in the occipital lobe, controls vision by processing visual information received from the eyes.
ii) The three types of cones in our eyes are red, green, and blue cones, each sensitive to different wavelengths of light, allowing us to perceive color vision.
Biochemistry of Vision Vision is the ability of the body to detect light and interpret it as an image. This process of vision occurs in three stages: capture of light by photoreceptors, transmission of signals through the optic nerve, and processing of these signals in the brain.
The biochemistry of vision, therefore, involves the biochemical reactions that take place within the eye to allow us to see.The part of the brain that controls the eyes and how it does thatThe eyes are controlled by the visual cortex, which is located at the back of the brain.
This part of the brain processes the signals that are transmitted from the eyes through the optic nerve. It does this by interpreting the electrical impulses that are generated by the photoreceptors in the retina.What are the three types of cones in our eyes and what is each one’s specific function?
There are three types of cones in the human eye, each with a specific function. These are:S-cones (short-wavelength cones) - these are sensitive to blue light and are responsible for our ability to see blue and violet light.M-cones (medium-wavelength cones) - these are sensitive to green light and are responsible for our ability to see green light.
L-cones (long-wavelength cones) - these are sensitive to red light and are responsible for our ability to see red light.These three types of cones work together to allow us to see all the colors of the visible spectrum. The brain then processes the information received from these cones to create a visual image.
For more such questions on human eye
https://brainly.com/question/12641604
#SPJ8
Part A
How many milliliters of a stock solution of 5.40 MM HNO3HNO3
would you have to use to prepare 0.180 LL of 0.550 MM HNO3HNO3?
Part B
If you dilute 20.0 mLmL of the stock solution to a final volu
The number of milliliters of a stock solution of 5.40 M HNO₃ you would have to use to prepare 0.180 L of 0.550 M HNO₃ is 18 mL.
The following equation can be used to determine the volume of the stock solution of HNO₃ that needs to be used to prepare a specific amount of HNO₃. The equation is:
C1V1 = C2V2
Here, V1 is the volume of the stock solution, C1 is the concentration of the stock solution, C2 is the desired concentration of the new solution, and V2 is the final volume of the new solution.
By plugging in the given values in the above formula, we get,
C1V1 = C2V2
V1 = (C2V2)/C1
Concentration of stock solution of HNO₃, C1 = 5.40 M
Final concentration of HNO₃ in the solution, C2 = 0.550 M
Final volume of the solution, V2 = 0.180 L
By substituting these values in the above formula we get,
V1 = (C2V2)/C1 = (0.550 M x 0.180 L) / (5.40 M) = 0.018 L or 18 mL
Therefore, the volume of the stock solution required to prepare 0.180 L of 0.550 M HNO₃ is 18 mL.
Learn more about stock solution here: https://brainly.com/question/31440822
#SPJ11
While the majority component of air is nitrogen (N 2
), the gas is very unreactive because of its stability due to the triple bonds that hold the nitrogen atoms together. Nitrogen gas is, therefore, relatively unavailable for chemical reactions. One of the few ways to "fix" nitrogen, making a nitrogen compound from the elemental nitrogen in the atmosphere, is the Haber process (aka Haber-Bosch process). In this reaction, nitrogen gas combines with hydrogen gas to yield ammonia. The enthalpy (ΔH) of this reaction is −92.22 kJ. This process was discovered by the German chemist Fritz Haber in the early twentieth century. Through extensive experimentation, Haber found the conditions that would produce adequate yields (at a temperature of about 50 ∘
C and a pressure of about 200 atm ). This process holds a significant importance today because of its application in the industrial production of ammonia-based fertilizer. In 1918 , Haber received the Nobel Prize in Chemistry for his work. However, a lot of controversy followed the Nobel Prize award. For this experiment, 16.55 grams of nitrogen gas and 10.15 grams of hydrogen gas are allowed to react in the reaction vessel. The ammonia vapor that is produced is then condensed, liquefied, and collected into a collection vessel. QUESTION SHEET Students must work individually. The following questions refer to the reaction described above. Answer the questions on the Answer Sheet provided. Make sure to put your student ID number on each page. ANY ANSWERS THAT ARE NOT WRITTEN ON THE ANSWER SHEET WILL NOT BE GRADED. MAKE SURE TO TURN IN BOTH THE QUESTION SHEET AND THE ANSWER SHEET. You must show all relevant work clearly and completely. Sentences must be used to state answers on the lines provided. Appropriate use of significant figures and units is required in order to receive full credit. 1. Write a balanced thermochemical equation with phase labels for the Haber process with the heat energy as part of the equation. ( 3 pts) 2. What is the theoretical yield of ammonia (in grams) if 16.55 grams of nitrogen gas and 10.15 grams of hydrogen gas are allowed to react? ( 9pts ) 3. Based on your theoretical yield, what is the percent yield of ammonia if only 8.33 grams of ammonia is
1.) Balanced thermochemical equation for the Haber process is N2(g) + 3H2(g) → 2NH3(g) + ΔH. 2) The theoretical yield of ammonia, is 5.027 grams. 3) The percent yield of ammonia, is 165.6%.
The balanced thermochemical equation for the Haber process, including the heat energy term, is as follows:
N2(g) + 3H2(g) → 2NH3(g) + ΔH
Theoretical Yield Calculation
To determine the theoretical yield of ammonia, we need to calculate the moles of nitrogen and hydrogen and determine the limiting reactant.
First, calculate the moles of nitrogen:
moles of N2 = mass of N2 / molar mass of N2
moles of N2 = 16.55 g / 28.0134 g/mol = 0.5901 mol
Next, calculate the moles of hydrogen:
moles of H2 = mass of H2 / molar mass of H2
moles of H2 = 10.15 g / 2.0159 g/mol = 5.0361 mol
Since the balanced equation has a 1:3 ratio between nitrogen and hydrogen, we can determine that nitrogen is the limiting reactant because it has fewer moles.
Using the balanced equation, we can calculate the theoretical yield of ammonia:
moles of NH3 = (moles of N2) / 2
moles of NH3 = 0.5901 mol / 2 = 0.2951 mol
Finally, calculate the mass of ammonia:
mass of NH3 = moles of NH3 × molar mass of NH3
mass of NH3 = 0.2951 mol × 17.031 g/mol = 5.027 g
Therefore, the theoretical yield of ammonia is 5.027 grams.
Percent Yield Calculation
To calculate the percent yield, we need the actual yield of ammonia. Given that only 8.33 grams of ammonia is obtained, we can calculate the percent yield as follows:
percent yield = (actual yield / theoretical yield) × 100
percent yield = (8.33 g / 5.027 g) × 100 = 165.6%
The percent yield of ammonia is 165.6%.
In summary, the balanced thermochemical equation for the Haber process is N2(g) + 3H2(g) → 2NH3(g) + ΔH. The theoretical yield of ammonia, when 16.55 grams of nitrogen gas and 10.15 grams of hydrogen gas react, is 5.027 grams. The percent yield of ammonia, based on an actual yield of 8.33 grams, is 165.6%. The percent yield indicates the efficiency of the reaction and takes into account any losses or side reactions that may occur during the process.
To learn more about Haber process click here:
brainly.com/question/30928282
#SPJ11
If I have 7.9 moles of gas at a pressure of 0.082 atm and at a
temperature of 55.oC, what is the volume of the
container that the gas is in, in liters?
The volume of the container is approximately 2591.28 liters
The ideal gas law equation is PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant (0.0821 L·atm/mol·K), and T is the temperature in Kelvin.
First, we need to convert the given temperature from Celsius to Kelvin. Adding 273.15 to 55.0°C gives us 328.15 K.
Now we can substitute the values into the equation:
PV = nRT
V = (nRT) / P
Plugging in the values:
V = (7.9 mol × 0.0821 L·atm/mol·K × 328.15 K) / 0.082 atm
Simplifying the equation:
V = 7.9 mol × 328.15 K
Calculating the result:
V ≈ 2591.28 L
Therefore, the volume of the container is approximately 2591.28 liters
Learn more about ideal gas here:
https://brainly.com/question/30236490
#SPJ11
1. The movement of Na+ out of a nerve cell following a depolarization event is? True or False?
-True
-False
2. Which ion channels are open and responsible for membrane rapid repolarization of a nerve fiber?
-Na+
-K+
-Ca++
-No answers provided
3. Excitatory graded potentials are the results of? -opening of voltage gated sodium channels -opening of receptors operated sodium channels -efflux of potassium through leakage channels -opening of voltage gated chloride channels
1) False ; 2) K⁺ ion channels are open and responsible for membrane rapid repolarization of a nerve fiber ; 3)Excitatory graded potentials are the result of the opening of receptors operated sodium channels
1) It is false that the movement of Na+ out of a nerve cell following a depolarization event. When a depolarization event occurs in a neuron, sodium channels open, and sodium ions move into the neuron, resulting in the membrane potential becoming more positive.
2. K⁺: K⁺ ion channels are open and responsible for membrane rapid repolarization of a nerve fiber. The rapid repolarization phase of the action potential is the result of the potassium channels opening and potassium ions leaving the cell.
3. Opening of receptors operated sodium channels: Excitatory graded potentials are the result of the opening of receptors operated sodium channels. The result is the depolarization of the postsynaptic neuron and the initiation of an action potential. Inhibitory graded potentials are the result of opening potassium channels, increasing the membrane potential's negative charge to reduce the likelihood of depolarization.
To know more about nerve fiber, refer
https://brainly.com/question/30671786
#SPJ11
Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) causes the disease known as COVID-19. The virus has a lipid bilayer envelope that holds its other components together, and helps it to adhere to the oils on human skin. b) Explain in your own words how soap molecules might interact with this virus, and why washing your hands with soap or another surfactant is a simple way of removing it from the skin. Illustrate your answer with one or more diagrams. c) Although crystalline solids may contain cubic structures, liquid droplets and bubbles are usually spherical. Explain why droplets and bubbles are not cubic or some other polyhedral shape. d) Calculate the surface tension of a liquid if it rises 0.080 m in a capillary of radius 3 10-5 m, with a contact angle of 10. The acceleration due to gravity is 9.8 m s-2 the density of the liquid at 25 C is 900 kg m-3, and you can assume that the density of the liquid vapour is zero. Comment on the reason for the sign of the answer. Under what circumstances would you gimage basedet the opposite sign? (10 marks)
a) Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) causes the disease known as COVID-19. The virus has a lipid bilayer envelope that holds its other components together, and helps it to adhere to the oils on human skin.
b) Soap molecules interact with the virus by dissolving the lipid bilayer envelope, which consists of a thin layer of lipids and proteins on the outside of the virus. Soap molecules contain two ends; one is polar and hydrophilic (water-loving) and the other is non-polar and hydrophobic (water-hating).
The hydrophilic end dissolves in water, while the hydrophobic end dissolves in fats and lipids. The hydrophobic end of the soap molecules can enter the lipid bilayer and surround the lipids and proteins of the virus, while the hydrophilic end of the soap molecules is attracted to the water molecules. As a result, the virus is disrupted and disintegrated.
Washing your hands with soap or another surfactant is a simple way of removing it from the skin as it dissolves the lipid bilayer envelope and breaks the virus into smaller pieces, preventing its transmission to other surfaces and people.
c) Droplets and bubbles are usually spherical rather than cubic or some other polyhedral shape because a sphere has the least surface area of all the possible shapes with a fixed volume. When a droplet or a bubble is formed, the surface tension pulls the surface of the liquid into the smallest surface area, which is a sphere. The surface tension is the reason why liquids tend to form spheres, which can be seen in raindrops, water droplets on a leaf, and soap bubbles.
d)The formula for surface tension is T = 2prρghwhere T is the surface tension of the liquid, p is the contact angle, r is the radius of the capillary tube, ρ is the density of the liquid, g is the acceleration due to gravity, and h is the height the liquid rises in the capillary tube.
Substituting the given values into the formula,
T = 2 × 3.14 × 3 × 10^-5 × 900 × 9.8 × 0.080 / 10°
T = 0.037 N/m
The reason for the sign of the answer is that the surface tension is a force that acts to reduce the surface area of a liquid. The force is always directed towards the center of the liquid, which is why it is a positive quantity. If the surface area of the liquid were to increase, the surface tension would act to reduce it again. Therefore, it is always positive.
Under the circumstances where the liquid is repelled by the capillary tube, the sign of the answer would be negative. This happens when the contact angle is greater than 90°.
learn more about surface tension here
https://brainly.com/question/138724
#SPJ11