Using moles to balance equations
Use the amounts of each product and reactant
listed below to balance the equations for the
reaction between carbon dioxide and water.
CO2 + H₂O C6H12O6 + O2
CO₂ = 528g H₂O = 216g C6H12O6 = 360g
0₂ = 384g

The balanced equation of the redox reaction using the ion-electron method is:

The correct option is D.

Redox reactions include a change in the oxidation state of the substrate. When oxidation occurs, electrons are lost, or the oxidation state increases. When a reduction occurs, electrons are gained or the oxidation state decreases.

The balanced equation of the redox reaction using the ion-electron method is given below as follows:

Hg + HNO₃ → Hg(NO₃)₂ + NO + H₂O

Hg⁰ is oxidized to Hg²⁺ by the loss of two electrons

N⁵⁺ is reduced to N²⁺ by a gain of three electrons

To balance electron loss, we add a coefficient of 3 in from of Hg and a coefficient of 8 in front of HNO₃

3 Hg + 8 HNO₃ → 3 Hg(NO₃)₂ + 2 NO + 4 H₂O

Learn more about redox reactions at: https://brainly.com/question/21851295

#SPJ1

The pressure of the gas produced is approximately 587.17 kPa.

To solve this problem, we first need to find the amount of gas produced by the reaction of aluminum hydroxide with ammonium persulfate, then use the Ideal Gas Law (PV = nRT) to calculate the pressure.

First, let's find the number of moles of ammonium persulfate by using the molar mass:

10.35 g ÷ (2 * (1 + 32 + 64 + 16)) g/mol = 0.108 mol

Next, let's find the number of moles of aluminum hydroxide:

613.28 mL * 2.744 M = 1692.04 mol

Now, let's assume that the reaction goes to completion and that all the aluminum hydroxide reacts with ammonium persulfate, so the number of moles of gas produced will be equal to the number of moles of ammonium persulfate:

0.108 mol

Finally, we can use the Ideal Gas Law to calculate the pressure:

P = (n * R * T) / V

where n = 0.108 mol, R = 8.31 J/mol K, T = (42.455 + 273.15) K, and V = 1536.70 mL * 10^-3 L

P = (0.108 * 8.31 * (42.455 + 273.15)) / (1536.70 * 10^-3)

P = (0.108 * 8.31 * 315.605) / (1.5367)

P = 905.752 / 1.5367

P = 587.17 kPa

So, the pressure of the gas produced is approximately 587.17 kPa.

Read more about pressure here:

https://brainly.com/question/28012687

#SPJ1

Christopher can change the force applied to item 3 to cause it to move the same distance that object 1 did. Mass times acceleration equals force (F = ma). As a result, the acceleration will decrease.

if the force is maintained while the object's mass increases. Christopher may thus exert additional force on item 3 to make up for the object's increased mass. In order for object 3 to move the same distance with the same force as object 1, he can also reduce its mass to match object 1's. As an alternative, Christopher can change the amount of friction that object 3 encounters. The force that opposes an object's motion is known as the friction force. If item 3 encounters less resistance to motion,With the same effort, it will travel further. To minimize friction and have item 3 go the same distance as object 1, Christopher might apply a lubricant to it. Christopher may make item 3 travel the same distance as object 1 by changing the force, mass, or friction force of that object.

learn more about Mass  here:

https://brainly.com/question/19694949

#SPJ4

When 66.4 g of the hydrochloric acid reacts with the excess manganese (iv) oxide, The grams of chlorine gas are formed is 129.2 g.

The reaction is given as :

4HCl(aq)  +  MnO₂(s)  --->  MnCl₂(aq)  +  2H₂O(g) + Cl₂(g)

Given that :

The mass of the hydrochloric acid = 66.4 g

The number of moles = mass / molar mass

The number of moles = 66.4 / 36.45

                                     =  1.82 mol

1 mole of HCl produces 1 mole of  Cl₂

Moles of  Cl₂ = 1.82 mol

The mass of  Cl₂ = moles × molar mass

                            = 1.82 × 71

                            = 129.2 g

Thus, the mass of the chlorine gas is 129.2g.

To learn more about moles here

https://brainly.com/question/26416088

#SPJ4

Answer:

The energy is released/harnessed in the form of an electrical current.  

Explanation:

The concept of a fuel cell is to harvest the energy of the H2 + O2 reaction in the form of electrical current, not as light, heat, and sound.  Although energy in the light, heat, and sound provide a higher entertainment value, the electricity produced in a fuel cell proves useful in powering computers, electric cars, phones, televisions, toasters, and other electrical and electronic devices.  The TV, phone, and computer provide substitute entertainment.

The amount of energy released is the same.  It is simply in a different form.  

If the piece of the metal has the volume of the 0.00670 L and the mass of the 60 g. The density of the rock is 8955.2 g/L.

The mass of the metal = 60 g

The volume of the metal = 0.00670 L

The density is the ration the mass to the volume of the substances .

The density expression is given as :

The Density = mass / volume

Where,

The mass = 60 g

The volume = 0.00670 L

The density = 60 / 0.00670

The density = 8955.2 g/L

Thus the density of the rock is the 8955.2 g/L.

To learn more about density here

https://brainly.com/question/18158909

#SPJ4

Uf6 is created using a bromine and fluorine combination. BrF3 is standard empirical formula for both the specified chemical.

Typically, the stoichiometry is used to only display the components of a molecule. When one wishes to quickly identify the elements they are working with, this is helpful. When you want to know how several atoms of each element are represented in the molecule, the chemical weight is the most helpful.

In statistics, the experimental rule is frequently applied to forecast outcomes. These rule can be employed as a rough approximation of the outcomes of the upcoming data after computing the error margin and before gathering precise data.

Percentage of Br = 58.37 %

Percentage of F = 41.63 %

Mass of Br = 58.37 g

Mass of F = 41.63 g

Bromine = 0.73 /0.73

= 1

Fluorine = 2.19 / 0.73

= 3

ratio = Br : F

= 1 : 3

To know more about empirical formula visit:

https://brainly.com/question/14044066

#SPJ4

Yes Paul feyerabend falls more under postmodernism rather than modernism.

Paul feyerabend is considered a postmodernist philosopher of science. He is known for his critiques of the scientific method and the idea that there is a single "correct" way to do science. He argued that science is not a rational or objective enterprise, but is instead shaped by social and cultural factors. Feyerabend's views align more with postmodernism, which emphasizes the importance of context and subjectivity in understanding knowledge and reality.

learn more about postmodernism here :

https://brainly.com/question/29447160

#SPJ4

The correct answer is  printed  flyers and internet .

Printed flyers and internet are two popular advertising mediums used to promote businesses. Printed flyers can be distributed directly to customers through mail or handed out in public places. This allows for a targeted approach and can be cost-effective, especially if the business is located in a small area. However, printed flyers can easily get lost or discarded, making it difficult to measure their effectiveness.

On the other hand, the internet offers a wider reach and can target a larger audience. Advertisements can be placed on websites, social media platforms, and search engines. This allows for more precise targeting based on demographics and interests. The internet also offers the ability to track and analyze the success of advertising campaigns in real-time, allowing for quick adjustments to be made to improve their effectiveness. However, the cost of internet advertising can be higher than traditional print advertising, and it may require more technical knowledge and resources to create and manage an online advertising campaign.

learn more about  advertising here:

brainly.com/question/16257206

#SPJ4

Leslie wants to know which advertising medium works best to promote her electronics store. She surveys her customers over a weekend and creates a bar graph. Based on her survey, which advertising mediums will work best to publicize Leslie’s in-store specials?

To neutralize 0.0350L of an unidentified Sn(OH)2 solution, 0.125L of a 0.075 M HBr solution is utilized. The molarity of the unknown Sn(OH)2 solution is 0.268 M.

The neutralization reaction between HBr and Sn(OH)2 is as follows:

HBr + Sn(OH)2 ---> SnBr2 + 2H2O

We can use the balanced equation and the stoichiometry of the reaction to find the molarity of the unknown Sn(OH)2 solution.

From the balanced equation, we can see that for every 1 mole of HBr, 1 mole of Sn(OH)2 is consumed.

We know that the HBr solution is 0.125L and 0.075M, so the number of moles of HBr is 0.125L x 0.075M = 0.00937 moles.

Since the number of moles of HBr is equal to the number of moles of Sn(OH)2, we can use the same number of moles to find the molarity of the unknown Sn(OH)2 solution.

The quantity of solute molecules per liter of solution is known as a solution's molarity. Therefore,

Molarity of unknown Sn(OH)2 solution = moles of solute / liters of solution

Molarity = 0.00937moles / 0.0350L = 0.268 M

Therefore, the molarity of the unknown Sn(OH)2 solution is 0.268 M.

To know more about molarity please refer: https://brainly.com/question/8732513

#SPJ4

A spoonfull of sodium chloride is dissolved in a liter of water.Solute is sodium chloride in this solution.

Salt, often known as sodium chloride (NaCl), is a substance that human body needs in order to:transporting and absorbing nutrition,keep blood pressure steady,maintain the proper fluid equilibrium.send nerve impulses,Muscles are tense and relaxed.Since salt is an inorganic substance, it does not originate from biological things. It is created when sodium chloride and chloride combine to produce white, crystalline cubes.Although salt is essential for your body to operate, too little or too much salt can be bad for your health.While salt is widely used in cooking, it is also a component of several meals and cleaning products. Your doctor or nurse will often administer sodium chloride as an injection in medical situations. Continue reading to learn why and how salt affects your body.

learn more about  sodium chloride Refer:brainly.com/question/9811771

#SPJ4

The equation for the standard Enthalpy of Formation of potassium bromate, KBrO3, corresponds to the reaction in which potassium bromate is formed from its individual elements at standard conditions (25°C and 1 atm pressure). The reaction can be represented as:

K(s) + Br2(l) + 1/2O2(g) → KBrO3(s)

The standard enthalpy of formation for a substance is the change in enthalpy that occurs when one mole of the substance is formed from its individual elements at standard conditions.

In this case, the standard enthalpy of formation for potassium bromate is the amount of heat released or absorbed when one mole of potassium bromate is formed from its individual elements (potassium, bromine, and oxygen) at standard conditions.

Learn more about Enthalpy of Formation here: https://brainly.com/question/28302300

#SPJ4

Note that Aerosol cans can explode if punctured or exposed to heat. Pressure cookers can malfunction and release steam & hot liquids if not properly maintained. Always use safety precautions and supervise children around these items.

Aerosol cans and pressure cookers are both ubiquitous household devices that, if not used properly, can be deadly.

Pressurized gas in aerosol cans forces the product out of the can. An aerosol can can explode if it is pierced or exposed to heat, inflicting significant harm or even death. It is critical to keep aerosol cans away from heat sources at all times and to never puncture or burn them.

Pressure cookers cook food faster by trapping steam within the pot to produce high pressure and high temperatures. However, if the pressure cooker is not correctly maintained or operated, it might malfunction and cause burns or scalds by releasing steam and boiling liquids.

It is critical to be aware of the possible risks of these goods and to use them with caution. Keep them away from heat sources and in excellent functioning order at all times. If you're not sure how to use them securely, seek assistance from an adult. It is also critical to watch youngsters while they are in the vicinity of aerosol cans or pressure cookers to protect their safety.

Learn more about Aerosol Cans:
https://brainly.com/question/29418985
#SPJ1

In a physical change, the substance's shape or appearance changes, but the type of matter it contains stays the same. But when matter undergoes a chemical change, at least one new substance with novel properties is created.

Chemical synthesis, or, alternatively, chemical decomposition into two or more different substances, occurs when one substance reacts with another to create a new substance.

Physical modifications are those that affect a chemical substance's form but not its chemical composition. Physical changes are usually unable to separate compounds into chemical elements or simpler compounds, but they can be used to separate mixtures into their component compounds.

An overview was given as your information is incomplete.

Learn more about chemical change on:

https://brainly.com/question/19794032

#SPJ1

The correct option is (C), i.e. C. The UV index represents the intensity of the ultraviolet rays.

The UV index serves as a gauge for the UV radiation intensity from the sun. It is a scale that ranges from 0 to 11+ and it is used to indicate the level of solar UV radiation on a particular day. The higher the UV index, the stronger the sun's UV radiation and the greater the risk of sunburn and other harmful effects on the skin and eyes. It is important to pay attention to UV index when spending time outdoors, especially during summer months and at high altitude or closer to the equator where the sun is stronger.

To know more about UV please refer: https://brainly.com/question/29473116

#SPJ4

Taking into account the reaction stoichiometry, given 0.842 g of NH₃ and 0.728 g of O₂, NH₃ is the excess reactant.

The balanced reaction is:

4 NH₃ + 5 O₂ → 4 NO + 6 H₂O

By reaction stoichiometry, the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

By reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

The limiting reactant is the one that is found in the least amount and, therefore, will be finished first at the time of the chemical reaction, resulting in the end of the reaction. In other words, when this reagent is finished, it will no longer be possible to continue generating a certain product.

The reactant in excess is one of which there is more than what is necessary for the chemical reaction to take place.

To determine the limiting reagent, it is possible to use a simple rule of three as follows: if by stoichiometry 68 grams of NH₃ reacts with 160 grams of O₂, 0.842 grams of NH₃ reacts with how much mass of O₂?

mass of O₂= (0.842 grams of NH₃× 160 grams of O₂)÷68 grams of NH₃

mass of O₂= 1.98 grams

But 1.98 grams of O₂ are not available, 0.728 grams are available. Since you have less mass than you need to react with 0.842 grams of NH₃, O₂ will be the limiting reagent.

Then, NH₃ will be the excess reactant.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

brainly.com/question/24653699

#SPJ1

Bond energy is explained as the energy needed to destroy a bond/link. These values ​​are positive, indicating that bond scission is endothermic.

To learn more about Bond energy from the given link:

https://brainly.com/question/14205107

#SPJ1

Carbohydrates like sugars and starches are made of only these three elements (C,H,O) form long chains that keep growing, so the identity of each compound is always changing.

Carbon, hydrogen, and oxygen make up the biological molecules known as carbohydrates, with the ratio of one carbon atom (C) to one water molecule (H 2O) being about right. Because they are composed of carbon (carbo-) and water, carbohydrates have the term "carbohydrates" (-hydrate). The length of carbohydrate chains varies, and the three types of physiologically significant carbohydrates are monosaccharides, disaccharides, and polysaccharides. We will learn more about each type of carbohydrate in this article, as well as the vital energy and structural functions they provide in humans and other living things.

learn more about Carbohydrates Refer:brainly.com/question/29775112

#SPJ4

To make up 1 L of a 0.5 M solution of EDTA starting with the free acid, the pH must be adjusted to 7.0. EDTA is a weak acid with a pKa of 2.0, 2.67, 6.16, and 10.26 for the four acetic acid groups.

At a pH of 7.0, EDTA will exist in a buffered state, meaning that it will be partially protonated and partially deprotonated.

To adjust the pH of the EDTA solution to 7.0, an alkali solution such as 10 M NaOH must be added. The amount of NaOH required can be calculated using the Henderson-Hasselbalch equation:

pH = pK a + log([base]/[acid])

where [base] is the concentration of the deprotonated form of EDTA and [acid] is the concentration of the protonated form of EDTA.

At a pH of 7.0, the acid-base equilibrium of EDTA will be:

[EDTA-] = [HEDTA]

At this pH, the buffer capacity is high. Since the pKa of EDTA is close to the desired pH, the buffer will resist changes in pH caused by added acids or bases.

Learn more about pH Buffer here: https://brainly.com/question/17878969

#SPJ4

Answer:

Element - Co. This is because an element is an atom that is made up of purely its own element. In this case, we have Co, also known as Cobalt on the periodic table of elements

Compound - CO. A compound is a substance that can be broken down into simple stable substances. Each compound is made from the atoms of two or more elements that are chemically bonded. As you can see, C (carbon) and O (oxygen) are chemically bonded together

Homogeneous mixture - C+O2

Heterogeneous mixture - CO2

Answer:

Humans use many fossil fuels such as oil and coal which in turn releases much carbon into the atmosphere. And burning of the forests also releases much carbon as well. This carbon in the atmosphere does many negative changes to the earth such as causing ocean acidification and overall hurting the planet's ecosystems.

Answer:

Explanation:

The molecular weights of the two components, which together have a molecular weight of 120 g/mol, would be the predicted m/z of the molecular ion peak for compound 2, which is a combination of acetic

Chemical compounds made up of two or more atoms and bound together by chemical bonds are called molecules. These bonds can be ionic or covalent, in which case the atoms transfer electrons rather than sharing them. Either H2 or DNA are examples of simple molecules. The different atom kinds and their arrangements inside a molecule affect the characteristics of that molecule. Molecules including proteins, lipids, and nucleic acids are necessary for the operation of living things, according to biochemistry. The kinds and configurations of molecules inside a material can have an impact on its characteristics, according to materials science. Pharmaceuticals create compounds that interact with certain

Learn more about molecular here:

https://brainly.com/question/3016219

#SPJ4

The temperature of the gas is 2.18 K, or -270.97°C, if I have 5 moles of the gas at a pressure of 6. 5 atm and a volume of 14 litres. The physical concept of temperature indicates in numerical form how hot or cold something is.

We may apply the Ideal Gas Law, which stipulates that PV = nRT, to determine the temperature of a gas.

P, V, and n all have known values of 6.5 atm, 14 L, and 5 moles, respectively. We also know that R, or 8.314 J/mol K, is the ideal gas constant.

So, to get the temperature, we may apply the equation shown below:

PV = nRT

T = (PV) / (nR) (nR)

T is calculated as (6.5 atm x 14 L) / (5 mol x 8.314 J/mol K).

T = (91 J) / (41.57 J/K)

T = 2.18 K

A thermometer is used to determine temperature. Thermometers are calibrated using a variety of temperature scales, which historically defined distinct reference points and thermometric substances.

learn more about temperature here:

https://brainly.com/question/7510619

#SPJ4

400.0 ml of a 0.300 m solution of NaCl is diluted to 900.0 ml. The new concentration of the solution is 0.133 M.

Given that :

The initial concentration, C1 = 0.300 M

The initial volume, V1 = 400 mL

The final volume, V2 = 900 mL

The final concentration , C2 = ?

The final concentration can be calculated as :

C1 V1 = C2 V2

C2 = C1 V1 / V2

C2 = ( 0.300 × 400 ) / 900

C2 = 0.133 M

Thus, the concentration of the new volume with the volume of 900 mL is 0.133 M.

To learn more about concentration here

https://brainly.com/question/25642048

#SPJ4

volume of the platinum bar is 30 cm3, density of the platinum bar is 25g/cm3

It is assumed that,

750 g is the mass of a platinum bar.

L = 5 cm is the bar's length.

The width of the bar is 4 cm.

Bar width, 1.5 cm in height

V=l*b*h v=4*5*1.5=30cm3 is the volume of the bar.

The density of the platinum bar needs to be determined. Any substance's density can be calculated using:

The density of the platinum bar is 25g/cm3 and the volume of the platinum bar is 30 cm3.

So, the platinum bar's density. Therefore, this is the necessary solution.

Learn more about density here:

https://brainly.com/question/29775886

#SPJ4

Answer: C

Explanation:

If a mixture contains 0.250 mol of fe and 1.20g of c. the total number of atoms in the mixture is:  2.106× 10^23.

First step is to convert it into number of atoms

Atoms  of Fe = 0.250 mol × 6.02 × 10^23 /1 mol

Atoms of Fe = 1.505 ×10^23

1.20g of C to atoms of C

Molar mass of C =12.011g/mol

Atom of C = 1.20g × 1 mol/12.011g × 6.02 × 10^23 /1 mol

Atom of C = 6.014× 10^22

Now let find the total number of atoms

Total number of atoms  = Atoms of Fe + Atoms of C

Total number of atoms  =  1.505 ×10^23 + 6.014× 10^22

Total number of atoms   = 2.106× 10^23

Therefore the Total number of atoms  is  2.106× 10^23

Learn more about Total number of atoms  here:https://brainly.com/question/441927

#SPJ1

50.9 grams of Cu are added to the excess silver nitrate solution.

The molar mass of a chemical compound is defined in chemistry as the ratio between the mass and amount of substance in any sample of said compound. The molar mass of a substance is a bulk property, not a molecular property. A substance's molar mass is the mass in grams of one mole of the compound. A mole is the number of entities present in a substance, such as atoms, molecules, or ions. A mole of any substance is defined as 6.022*10^23 molecules.

Here,

moles =  mass÷  molar mass

molar mass of Cu = 63.5 g/mol

moles = 15.00 g÷ 63.5 g/mol

= 0.236  moles

moles of Ag   =0.236  

moles  x 2/1 =0.472  moles

mass = moles x molar mass

the molar mass of Ag =107.87 g/mol

mass  = 0.472  moles x 107.87 g/mol = 50.9 g

50.9 grams of Cu is added to the solution of excess silver nitrate.

To know more about molar mass,

https://brainly.com/question/11766789

#SPJ1

Answer:

80,000km/h

Explanation:

Answer: 12.5 hope this is right.

Explanation:

The highest melting point is 0.100 m AlCl₃

Water has a 0.51 Cl  molal melting point elevation constant.

They all share the same molal melting point elevation constant because they are all aqueous solutions.

ΔT = i*Kb*m

The melting point elevation is ΔT, 

i = the van't Hoff factor =1,

The molal elevation constant of water's melting point is 0.51°C/m.

"where m = the molality = 0.100 m"

ΔT = i*Kb*m

ΔT = 1 * 0.51 * 0.100

ΔT  = 0.051 °C

ΔT = i*Kb*m

ΔT =2 * 0.51 * 0.100

ΔT = 0.102 °C

ΔT = i*Kb*m

ΔT =4 * 0.51 * 0.100

ΔT = 0.204 °C

ΔT = i*Kb*m

ΔT =3 * 0.51 * 0.100

ΔT = 0.153 °C

Your question is incomplete but most probably your full question was

which aqueous solution will have the highest melting point? assume all of the solute are nonvolatile and have ideal van't hoff factors. 0.100 m C₆H₁₂O₆ 0.100 m NaCl 0.100 m AlCl₃0.100 m MgCl₂

learn more about melting point at

https://brainly.com/question/29578567

#SPJ4