Use the equations below to calculate the enthalpy of formation for propane gas, C3H8, from its elements, hydrogen gas and solid carbon. Please hurry!!
​

Answer:

0.01 M

Explanation:

As this problem deals with a dilution process, we can solve it by using the following formula:

Where subscript 1 stands for the initial concentration and volume, while 2 stands for the final conditions.

That means that in this case:

We input the given data:

Answer:

The main function of the cell membrane is to protect the cell from the outer environment.

Answer: The answer is D.) to separate the inside of the cell from the outside environment

Explanation:

Answer:

C. some substances can move freely across the cell membrane, while others must be transported.

Explanation:

Answer:c it’s dropped off in the kidneys

Explanation:

I took the quiz

The solid wastes are from the circulatory system is expelled to the kidney where, the nitrogenous wastes like urea and uric acid is excreted as urine from the body.

A circulatory system is an organ system, where the blood is purified and oxygenation of blood takes place. Through circulatory system, the blood reaches throughout the body pumped from the heart through veins.

The organs included in circulatory system are lungs, heart, aorta, veins, blood vessels etc. There are various kinds of blood vessels each having specific functions.

There is a network of blood vessels including arteries and large veins, capillaries that join the venules and other veins. All the nutrients and ions are circulated throughout the body through blood and solid wastes are then expelled to kidney.

Kidney function as a sieve to clean the good fluid from waste products. Uric acid and urea along with water excreated as urine then. Thus, option C is correct.

To find more about circulatory system, refer the link below:

https://brainly.com/question/10103458

#SPJ6

Answer:

Lower the temperature of the solution

Answer:

A

Explanation:

brainliest pls

Answer:

One movement that i can't do is float in mid air

Explanation:

Answer:

https://www.clutchprep.com/chemistry/practice-problems/70217/hi-aq-h2o-l-h3o-aq-i-aq-identify-each-as-either-a-bronsted-lowry-acid-bronsted-l

Explanation:

https://www.clutchprep.com/chemistry/practice-problems/70217/hi-aq-h2o-l-h3o-aq-i-aq-identify-each-as-either-a-bronsted-lowry-acid-bronsted-l

Answer:

[tex]V_2=8.4L[/tex]

Explanation:

Hello there!

In this case, according to the definition of the Boyle's law, which describes de pressure-volume behavior as an inversely proportional relationship, it is possible for us to write:

[tex]P_1V_1=P_2V_2[/tex]

Thus, since we are given the initial pressure and temperature, and the final pressure, we are able to calculate the final volume as shown below:

[tex]baV_2=\frac{P_1V_1}{P_2}\\\\V_2=\frac{8.0L*1.013bar}{ 0.968bar}\\\\V_2=8.4L[/tex]

Regards!

Answer:

382.49 C degree Celsius

Explanation:

Hello,

This problem deals with understanding the ideal gas law which hopes to predict how ideal gases might behave in any given condition. I listed the formula below and we are basically just going to solve for temperature by rearranging the equation as seen on the picture (there's also other rearranged ones in case you need to solve for those).

Universal gas constant R has a value of 0.0821 L * atm/(mole * K) when working with these given units so it will be part of this equation. R value changes based on what units you have.

T = PV/nR

   = (2.33) (72.31) / (3.13)(0.0821)

   = 655.64 K

Question is asking temperature in celsius so we employ the formula attached below:

C = K - 273.15

   = 655.64-273.15

    = 382.49 degree Celsius

382.49 degree Celsius is the answer!

Answer:1/4

Explanation:

Answer:

matter is anything that occupies space

states of matter : solid,liquid, gas,plasma

Answer:

matter can be anything, tables chairs, literally anything. it has volume and takes up space.

Explanation:

Solids, liquids, gases, plasmas, and Bose-Einstein condensates (BEC)

Answer:

194g of distilled water.

Explanation:

Hello there!

In this case, according to the given information for this problem, it turns out possible for us to use the given mass of the solution and the percent by mass of NaF to firstly calculate the grams of this solute as shown below:

[tex]\%m=\frac{m_{solute}}{m_{solution}} *100\%\\\\m_{solute}=\frac{\%m*m_{solution}}{100\%} \\\\m_{solute}=\frac{3.0\%*200.0g}{100\%} \\\\m_{solute}=6g[/tex]

And finally, since the mass of solution is calculated by adding mass of solute and mass of solvent we obtain the mass of water (solvent) as follows:

[tex]m_w=200g-6g=194g[/tex]

Therefore, the answer is 194g of distilled water

Regards!

Answer:

55.0g water can be made

Explanation:

To solve this question, we must convert the molecules of H2 to moles using Avogadro's constant. With the moles, and the reaction:

H2 + 1/2O2 → H2O

We can find the moles of H2O = Moles H2 and its mass of using molar mass of water -H2O = 18.01g/mol-

Moles H2 = Moles H2O:

1.84x10²⁴ molecules * (1mol / 6.022x10²³ molecules) = 3.055 moles H2O

Mass:

3.055 moles H2O * (18.01g / mol) = 55.0g water can be made

Answer: D.) non-spontaneous.

Explanation:

Answer:

1.5 × 10³ g

Explanation:

Step 1: Given and required data

Step 2: Calculate the temperature change

ΔT = 28.5°C - 22.0 °C = 6.5 °C

Step 3: Calculate the mass (m) of water

We will use the following expression.

Q = c × m × ΔT

m = Q / c × ΔT

m = 41,840 J / (4.184 J/g.°C) × 6.5 °C = 1.5 × 10³ g

Answer:

[tex]C_{alloy}=0.497\frac{J}{g\°C}[/tex]

Explanation:

Hello there!

In this case, according to this calorimetry problem on equilibrium temperature, it is possible for us to infer that the heat released by the metal allow is absorbed by the water for us to write:

[tex]Q_{allow}=-(Q_{water}+Q_{Al})[/tex]

Thus, by writing the aforementioned in terms of mass, specific heat and temperature, we have:

[tex]m_{alloy}C_{alloy}(T_{eq}-T_{alloy})=-(m_{water}C_{water}(T_{eq}-T_{water})+m_{Al}C_{Al}(T_{eq}-T_{Al})[/tex]

Then, we solve for specific heat of the metallic alloy to obtain:

[tex]C_{alloy}=\frac{-(m_{water}C_{water}(T_{eq}-T_{water})+m_{Al}C_{Al}(T_{eq}-T_{Al})}{m_{alloy}(T_{eq}-T_{alloy})}[/tex]

Thereby, we plug in the given data to obtain:

[tex]C_{alloy}=\frac{-(400g*4.184\frac{J}{g\°C} (30.5\°C-10.0\°C)+200g*0.900\frac{J}{g\°C}(30.5\°C-10.0\°C)}{150g(30.5\°C-540\°C)} \\\\C_{alloy}=0.497\frac{J}{g\°C}[/tex]

Regards!

Answer: The pressure is 1137.5 mm Hg its pressure if its volume is increased to 150 [tex]cm^{3}[/tex] at 35 °C

Explanation:

Given: [tex]P_{1}[/tex] = 750 mm Hg,    [tex]V_{1} = 130 cm^{3}[/tex],     [tex]T_{1} = 20^{o}C[/tex]

[tex]P_{2}[/tex] = ?,          [tex]V_{2} = 150 cm^{3}[/tex],            [tex]T_{2} = 35^{o}C[/tex]

Formula used to calculate the new pressure is as follows.

[tex]\frac{P_{1}V_{1}}{T_{1}} = \frac{P_{2}V_{2}}{T_{2}}[/tex]

Substitute the values into above formula as follows.

[tex]\frac{P_{1}V_{1}}{T_{1}} = \frac{P_{2}V_{2}}{T_{2}}\\\frac{750 mm Hg \times 130 cm^{3}}{20^{o}C} = \frac{P_{2} \times 150 cm^{3}}{35^{o}C}\\P_{2} = 1137.5 mm Hg[/tex]

Thus, we can conclude that the pressure is 1137.5 mm Hg its pressure if its volume is increased to 150 [tex]cm^{3}[/tex] at 35 °C.

Answer:

(a) 157.7 g

(b) 7.04 g/dm³

Explanation:

(a) From the question,

According to Avogadro's Law,

1 mole of every gas at STP occupies a volume of 22.4 dm³

But mass of 1 mole of the diatomic gas  = molar mass of the gas.

This Implies that,

The molar mass of the gas at STP occupies a volume of 22.4 dm³

From the question,

If,

0.25 L bottle contain 1.76 g of the gas,

Therefore,

Molar mass of the gas = (1.76×22.4)/0.25

Molar mass of the gas = 157.7 g.

(b) Density of the gas = mass/volume

D = m/v

Given: m = 1.76 g, v = 0.25 L = 0.25 dm³

Therefore,

D = 1.76/0,25

D = 7.04 g/dm³

Answer:

hope you liked it!!!!!!

A compound is a pure substance that is composed of elements chemically bonded in definite proportions. A compound can be broken down into simpler substances only by chemical reactions, such as electrolysis.

A solution is a homogeneous mixture, meaning that it is the same throughout. A solution is composed of one or more solutes dissolved in a solvent. The proportions of the solute(s) can vary, as the components of a solution are not chemically bonded. The components of a mixture can be separated by physical means, such as filtration and distillation

Answer:

dimond is stronger

Explanation:

Answer:

Graphite and Diamond are different because they have different structures. ... However each carbon atom in Diamond has 4 covalent bonds with other Carbons, making it extremely strong and hard. On the other hand, each carbon in graphite is bonded to three carbons, and therefore graphite is formed in layer

Also:

Each carbon atom in a diamond is linked to four other carbon atoms. Each carbon atom in graphite is linked to three other carbon atoms. Diamond is poor conductor of electricity due to the absence of free electrons. Graphite is good conductor of electricity due to the presence of free electrons in its structure.

Explanation:

Hope this helps

Answer:

13%

Explanation:

Answer:chemical formula of acetic acid is  or

so, molecular mass of acetic acid = 2 × atomic mass of C + 4 × atomic mass of H + 2 × atomic mass of O

= 2 × 12 + 4 × 1 + 2 × 16

= 24 + 4 + 32

= 60g/mol

given mass of acetic acid = 22g

so, no of moles of acetic acid = given mass/molecular mass

= 22/60 ≈ 0.367

so, number of moles of acetic acid is 0.367mol

number of molecules in 0.367 mol of acetic acid = 6.022 × 10²³ × 0.367

= 2.21 × 10²³

Explanation:

Answer: Tadpole, also called polliwog, aquatic larval stage of frogs and toads. Compared with the larvae of salamanders, tadpoles have short, oval bodies, with broad tails, small mouths, and no external gills. The internal gills are concealed by a covering known as an operculum.

Explanation:

Answer:

[tex]0.00068M[/tex]

Explanation:

Hello there!

In this case, according to the ionization of calcium hydroxide, a strong base:

[tex]Ca(OH)_2\rightarrow Ca^{2+}+2OH^-[/tex]

Thus, since there is a 1:2 mole ratio of calcium hydroxide to hydroxide ions, we apply the following proportional factor to obtain:

[tex]0.00034\frac{molCa(OH)_2}{L}*\frac{2molOH^-}{1molCa(OH)_2} \\\\=0.00068\frac{OH^-}{L}\\\\=0.00068M[/tex]

Regards!

Answer:

Fe is limiting reactant and 3.00g of Fe2O3 will be produced

Explanation:

To solve this question we must convert the mass of each reactant to moles and, using the reaction we can find limiting reactant. With moles of limiting reactant we can find moles of Fe2O3 and its mass as follows:

Moles Fe -Molar mass: 55.845g/mol-

2.1g * (1mol / 55.845g) = 0.0376 moles

Moles O2 -Molar mass: 32g/mol-

2.1g * (1mol / 32g) = 0.0656 moles

For a complete reaction of 0.0656 moles of O2 are needed:

0.0656moles O2 * (4mol Fe / 3 mol O2) = 0.0875 moles Fe

As there are just 0.0376 moles,

Fe is limiting reactant

The mass of Fe2O3 is:

Moles:

0.0376 moles Fe* (2mol Fe2O3 / 4mol Fe) = 0.0188 moles Fe2O3

Mass:

0.0188 moles Fe2O3 * (159.69g / mol) =

3.00g of Fe2O3 will be produced