Answers
Answer:
I believe this answer is -They maintain their properties-
Explanation:
Let's see what others say. :)
Related Questions
urgenttt helpppp!!!!!!!!!!!!!!!!!!!!!!!!
a studentistrying to design an artificial eardrum for their science fair project. they made their eardrum hollow to cut down on cost and weight. when they tested how long it took to test the subject to hear deep, they found that their control ear drum made out of wood did better than their created one. the temperature that day wa 98 fahrenheit.
determine which statement supports the students findings.
a.the created eardrum performed worst because sound travels faster in solids due to large distance between the particals
b. the created eardrum performed worst because sound travels faster in solids due to the small distance between the particles.
c.the created eardrum performed worst because sound travels slower in air due to the small distance between the particles.
d.the created eardrum performed worst because sound travels slower through air in high temperatures due to the particles moving slower.
Answers
The blue mass in the image is 10kg.
The red mass in the image is 10kg.
The blue mass is currently 4 meters away from the red mass.
If we change each mass to 20kg, what will happen to the gravitational force each mass puts on the other?? You have to pick a answer through A,B,C! The force of gravity will increase as the masses increase.
The force of gravity will not change as the masses increase.
The force of gravity will decrease as the masses increase.
Answers
Venn diagrams are used for comparing and contrasting different topics. The overlapping sections show characteristics that the topics have in common, and the sections that are unique to each topic show the characteristics apply to only that topic.
Overlapping circles are labeled solid on top, liquid at right, gas at left, with the intersection of all three labeled state of matter.
Which Venn diagram accurately describes what characteristics of solids, liquids, and gasses could be added to this diagram?
Overlapping circles are labeled definite shape most dense at top, mid-level density at right, definite volume least dense at left, with the intersection labeled state of matter.
Overlapping circles are labeled definite shape most dense at top, mid-level density at right, least dense at left, with the intersection of all three labeled state of matter. The intersection of the top and right circles is labeled definite volume.
Overlapping circles are labeled definite shape most dense at top, definite volume mid-level density at right, least dense at left, with the intersection of all three labeled state of matter. The intersection of the left and right circles is labeled definite shape.
Overlapping circles are labeled definite shape least dense at top, definite mid-level density at right, most dense at left, with the intersection of all three labeled state of matter. The intersection of the left and right circles is labeled definite shape.
Answers
Answer:
its the third image
Explanation:
Answer:
3
Explanation:
IF YOU PASS SCIENCE TEST HELP ME PLEASE!!!
refer to the data table below. According to the data, what conclusion can be drawn from the data table below?
A. sound doesn't travel through human beings at all
B. sound travels through human beings faster than through cork.
C. sound travels through human beings slower than through a cork
D. sound travels through human being
Answers
Answer:
uhmmm wait I'm still doing my module
1) If you release a rubber band that had 10 units of elastic energy, 12 units of movement energy cannot be produced. Why not?
2) For the rubber band in question 3, what would its percentage efficiency be if 7 units of movement energy were produced? Where have the remaining 3 units of energy gone?
3) What are the by-product energy transformations for a car?
Answers
Answer:
press dat crown for meh
Explanation:
A system's internal energy is given by the heat added to the system less the work done by the system
1) 12 units of movement energy cannot by produced from 10 units of elastic energy because the additional 2 units of energy cannot be created in the closed system of the rubber band
2) Part A; The percentage efficiency = 70%
Part B; The remaining 3 units is transformed into heat and sound energy
3) The by-products of the energy transformation for a car are;
Heat energySound energyChemical energyThe reason for the above outcomes is as follows:
1) The first law of thermodynamics known as the law of conservation of energy states that the sum of energy within an closed or isolated system is constant and it is conserved as time progresses
Mathematically, the law can be expressed as follows;
K₁ + U₁ = K₂ + U₂
Where;
K₁ and U₁ = Initial kinetic and potential energy respectively
K₂ and U₂ = Final kinetic and potential energy respectively
The energy stored in the rubber band is given as 10 units of elastic energy. If the rubber band is taken as being in a closed system, then no additional energy is added, and we have;
U₁ = 10 units and K₁ = 0, which gives;
K₁ + U₁ = 10 units
According to the law of conservation of energy, we get;
10 units = K₁ + U₁ = K₂ + U₂
Therefore, the sum of the final kinetic and potential energy is 10 units and the energy can only be transferred from kinetic to potential (internal) energy, such that the maximum kinetic, movement, energy obtainable is 10 units and 12 units of movement energy cannot be produced
2) The given parameter:
Initial amount of elastic energy = 10 units
The amount of movement energy produced = 7 units
[tex]Efficiency = \mathbf{\dfrac{Useful \ energy \ produced}{Total \ energy \ stored} \times 100}[/tex]
[tex]\mathbf{Efficiency \ of \ the \ rubber \ band, \, \eta }= \dfrac{Movement \ energy \ produced}{Elastic \ energy \ stored} \times 100[/tex]
Therefore;
[tex]\mathbf{\eta = \dfrac{7}{10} \times 100} = 70 \%[/tex]
The percentage efficiency of the rubber band, η = 70%
Part B
The remaining 3 units of energy is transformed into other energy forms including heat and sound energy
3) A by-product is a secondary product, produced in addition to a main or primary product.
In the energy transformations of a car, the main product of the energy transformation is the movement energy of the car
The by-product of the energy transformation in a car includes;
Heat energy; The temperature of the engine of the car rises
Sound energy; The engine sound
Chemical energy; The formation of new chemicals during the combustion process
Learn more about conservation of energy here:
https://brainly.com/question/11728993
Two laws are described below:
Law A: It can be broken under certain conditions.
Law B: It does not focus on a natural phenomenon.
Based on these characteristics, what can you conclude about Law A and Law B?
Both Law A and Law B are societal laws.
Both Law A and Law B are scientific laws.
Law A is a scientific law and Law B is a societal law.
Law A is a societal law and Law B is a scientific law.
Answers
Answer:
B is the answer. Law A is a scientific law and Law B is a societal law
Answer: Both law A and B are scientific laws
Rahul sees a flock of birds. He watches as the flying birds land in neat little rows on several power lines. Which change of state does the motion of the birds most closely model?
melting
vaporization
deposition
sublimation
Answers
Answer:
C.) Deposition.
Explanation:
I just took the unit test
The change of state that Rahul sees and models the motion (movement) of the birds is called deposition.
What is deposition?In physics, deposition can be defined as a transition phase from a gaseous state to a solid without the need to pass to a liquid state.
The physical phenomena of deposition are relatively common in nature and they include many natural processes.In conclusion, the change of state that Rahul sees and models the motion (movement) of the birds is called deposition.
Learn more about deposition here:
https://brainly.com/question/1128134
#SPJ5
Can someone help me
Which of the following would a good frame of reference?
A) the moon
B) a tree
C) a rabbit
D) your sister while she rides her bike
Answers
Which contributions did Johannes Kepler make? Check all that apply.
Which contributions did Johannes Kepler make? Check all that apply.
He revived Aristotle’s model of the solar system.
He solved Ptolemy’s model by proving elliptical orbits.
He proved Galileo’s calculations were incorrect.
He determined that planets move faster when closer to the Sun.
He discovered laws of planetary motion.
Answers
Answer:
he solved ptolemy's model of the solar system
he determined that planets move faster when closer to the sun
he discovered laws of planetary motion
Explanation:
•✧•
John Kepler made significant contributions to optics and geometries. Options 2,4 and 5 are the statement that shows the contribution of Johannes Kepler.
What are the contributions of Johannes Kepler?Johannes Kepler was indeed an astronomer and mathematician who finds the planet's elliptical orbits around the sun.
He identifies three basic rules of planetary motion. He also made significant contributions to optics and geometries.
Following are the contributions of Johannes Kepler;
2. He solved Ptolemy’s model by proving elliptical orbits.
4. He determined that planets move faster when closer to the Sun.
5. He discovered the laws of planetary motion.
Hence options 2,4 and 5 are the statement that shows the contribution of Johannes Kepler.
To learn more about the Johannes Kepler refer to the link;
https://brainly.com/question/247659
True or False this is a black hole 75 points + Brainliests
Answers
Answer:
true
Explanation:
lol idek tbh
Answer: true?
thx for the points anyway
Explanation:
Use the chemical reaction to answer the question.
Answers
Answer:
60 grams
Explanation:
Where in the eye are rods and cones located?
cornea
retina
lens
iris
WILL GIVE BRAINLIEST!
Answers
Answer:
By the Retina
Explanation:
I like your profile pic
Answer: retina
Explanation: They are located in the retina (a layer at the back of the eye).
A lever has an input arm 50 centimeters long and an output arm 40 centimeters long. What is the mechanical advantage of the lever? (MA=Input distance / Output distance) a 2.0 b 1.25 c 1 d 0.8
Answers
Answer:
45
Explanation:
well 45
Mechanical advantage will be option b)1.25
What is Mechanical advantage ?
Mechanical advantage equal to the ratio of length of the input arm and output arm
Given
Input arm = 50 cm
output arm = 40 cm
Mechanical advantage = Input distance / Output distance
= 50 / 40
= 1.25
Mechanical advantage will be option b)1.25
learn more about Mechanical advantage :
https://brainly.com/question/16617083?referrer=searchResults
#SPJ2
PLEASE HELP! 20 POINTS!
Amy and Chris took different routes to travel from Point A to Point E. Amy took the route along A, B, C, D, and E and reached the destination in 2 hours. Chris took the route along A, G, F, and E and reached the destination in 3 hours. Their routes are shown.
Which conclusion is correct?
Amy's average speed is twice Chris's average speed.
Chris's average speed is twice Amy's average speed.
Amy's average speed is equal to Chris's average speed.
Chris's average speed is three times Amy's average speed.
Answers
Answer:
Amy's average speed is equal to Chris's average speed
Answer:
im pretty sure its 'a'
Explanation:
Amy took 1 more point than Chris and reached their destination in 2 Hrs. when Chris took less and reached the destination in 3 Hrs.
see picture for visual explanation: