Answer:
3.135 kN/C
Explanation:
The electric field on the axis of a charged ring with radius R and distance z from the axis is E = qz/{4πε₀[√(z² + R²)]³}
Given that R = 58 cm = 0.58 m, z = 116 cm = 1.16m, q = total charge on ring = λl where λ = charge density on ring = 180 nC/m = 180 × 10⁻⁹ C/m and l = length of ring = 2πR. So q = λl = λ2πR = 180 × 10⁻⁹ C/m × 2π(0.58 m) = 208.8π × 10⁻⁹ C and ε₀ = permittivity of free space = 8.854 × 10⁻¹² F/m
So, E = qz/{4πε₀[√(z² + R²)]³}
E = 208.8π × 10⁻⁹ C × 1.16 m/{4π8.854 × 10⁻¹² F/m[√((1.16 m)² + (0.58 m)²)]³}
E = 242.208 × 10⁻⁹ Cm/{35.416 × 10⁻¹² F/m[√(1.3456 m² + 0.3364 m²)]³}
E = 242.208 × 10⁻⁹ Cm/35.416 × 10⁻¹² F/m[√(1.682 m²)]³}
E = 6.839 × 10³ Cm²/[1.297 m]³F
E = 6.839 × 10³ Cm²/2.182 m³F
E = 3.135 × 10³ V/m
E = 3.135 × 10³ N/C
E = 3.135 kN/C
an optician uses a plane mirror to help him. suppse a patient sits in a chair 2.5m away from him. He views the image of a chart which faces the mirror and is located 30m behindd him. how far is the chart as viewed by his eyes
Answer:
I think 75 m
Explanation:
tell if it was correct
A baseball is thrown at a 22.5° angle and an initial velocity of 65 m/s. What will be its horizontal
and vertical velocity?*
Answer:
Horizontal
Explanation:
It is going more sideways than upwards
What is the new speed for an 10 kg object after 16500 N was applied to it for 2 seconds?
Answer: 3300 m/s
F = ma; units: N = kg(m/s/s); where F and a are both vectors, while m, t, and v (speed) are scalars
We are given the mass, force, and the time; however, speed is our unknown.
[F = 16500 N] [m = 10 kg] [t = 2 s] [v = unknown]
What we can do is use kinematics in order to relate v and t with F and m:
For example, we can use V = V₀ + at
Since F = ma can equal a = F/m, we can replace the a variable within the kinematics equation with F/m, so that:
V = V₀ + at
V = V₀ + (F/m)t
In this problem, we can assume the initial value V to equal 0, giving us:
V = (F/m)t
Plugging in the quantities we get:
V = [tex]\frac{16500 N}{10kg}[/tex]· 2s
V = 3300 m/s
To further check whether this is the right manipulated equation to use, we can use dimensional anaylsis to determine that:
V = [tex]\frac{kg(m/s/s) }{kg}[/tex]· s
V = m/s
I hope this helped!
Where was the first FIFA World Cup held?
(HINT: The host country won the tournament
Answer:
The 1930 FIFA World Cup was the inaugural FIFA World Cup, the world championship for men's national association football teams. It took place in Uruguay from 13 to 30 July 1930.
Explanation:
hope it helps if so pls give it the brainliest answer
Answer:
[tex]\huge\boxed{Uruguay\hookleftarrow}[/tex]
⎇ The first FIFA World Cup Championship took place in Uruguay from from 13 July 1930 to 30 July 1930.
When an object absorbs light energy, it reflects
A. all of the colors
B. none of the colors
C. only the colors you see
When an object absorbs light energy, it reflects none of the colors. The correct option is B.
What is reflection?The change in direction of a wavefront at an interface between two different media so that the wavefront returns to the medium from which it originated is referred to as reflection. Reflection of light, sound, and water waves are common examples.
Objects appear different colors because they absorb certain colors (wavelengths) while reflecting or transmitting others. The wavelengths that are reflected or transmitted are what we see as colors.
If photon energy is absorbed, the energy from the photon is typically manifested as heating the matter.
Light absorption causes an object to become dark or opaque to the wavelengths or colors of the incoming wave: Wood is impervious to visible light.
Thus, the correct option is B.
For more details regarding reflection, visit:
https://brainly.com/question/15487308
#SPJ2
PLEASE ANSWER ASAP, WILL MARK BRAINLIEST***
What is the characteristic of image formed by a convex lens that is placed at the focal length of the lens?
Answer:
The image will be real, inverted, and enlarged. For convex lenses, when the object is placed inside F, the image will be on the same side of the lens as the object and it will be virtual, upright, and enlarged.Feb
A(n) _______ studies physical components and characteristics of celestial objects.
The answer is ASTROPHYSICIST!
Answer:
Astronomers?
Explanation:
Answer:
Astrophysicist?
Explanation:
How death rate helps in changing population
All eukaryotic cells have mitochondria, but only the cells of photosynthetic organisms have chloroplasts. Explain how what takes place in chloroplasts differs from what takes place in mitochondria (singular = mitochondria).
Answer:
Explanation:
In the chloroplast, photosynthesis occur. The chloroplast capture light energy from the sun and use it with carbondioxide and water to produce glucose and oxygen. Chloroplasts is found in plant cells only
But mitochondria is refer as the power House of the cell. It's break down fuel molecules and produce energy in cellular respiration. Mitochondria is found in both plant and animal cell.
A scientist wants to spend her summer conducting research on the effects of very cold temperatures on the human body. Which part of the world would be the best place to conduct her summer research?
Answer:
Antarctica
Explanation:
ap3x
Tyra made the following bar graph shown to represent the relative distances of four different astronomical bodies from Earth.
The title of the bar graph is Distance of Bodies in Space from Earth. Four bars are labeled A, B, C, and D. Bar C is the shortest. Bar D is about three times the size of bar C. Bar A is about six times the size of bar C. Bar B is about eight times the size of bar C.
If D represents Mercury, which of the following could be represented by B and C?
B could be the moon, and C could be Venus.
B could be Venus, and C could be the moon.
B could be the moon, and C could be Jupiter.
B could be Jupiter, and C could be the moon.
Answer: D
Choice A calls B the moon which is incredibly tiny compared to Venus so this is wrong, choice B calls B Venus which is a relatively small planet and C the moon... that is a bit overkill so no. Choice C says B is the moon and C is Jupiter, Jupiter being the largest planet this is a easy no, leaving D to be the only logical and correct answer.
Explanation: MARK ME BRAINLIEST PLZZZZZZZZZZzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
Answer: Answer D. because B. Jupiter is the farthest from Earth from those answer choices and C. is the moon because it is the closest out of those answer choices.
So, the answer is D: B could be Jupiter, and C could be the moon.
Explanation: Please give Brainlist.
Hope this helps!!!!
When a wave passes from a less dense medium to a denser one, most of the
wave energy is
A. reflected.
B. diffracted.
C. absorbed.
D. refracted.
Answer:
D. Refracted
Explanation:
At the point when light passes from a less thick to a more thick substance, (for instance passing from air into water), the light is refracted (or bowed) towards the ordinary. The bowing happens on the grounds that light voyages all the more gradually in a denser medium. The answer is D, refracted.
What are successfulness of the Competition policy in South Africa?
Answer:
The product choices along with its competitive prices were provided to the consumers. Practices such as horizontal collusion and resale price maintenance was declared unlawful in 1984. Prevention of monopoly growth was the aim of the competition policy act.
Explanation:
hope this helps you
A lamp is connected to the power supply.
The lamp requires an input potential difference of 5.0V
The alternator generates a potential difference of 1.5V
The primary coil of the transformer has 150 turns.
Calculate the number of turns needed on the secondary coil
Number of turns on the secondary coil = ?
Answer:
There are 45 turns in the secondary coil.
Explanation:
Given that,
Input potential of the lamp, [tex]V_{in}=5\ V[/tex]
The output potential of the lamp, [tex]V_{out}=1.5\ V[/tex]
Number of turns in primary coil, [tex]N_P=150[/tex]
We need to find the number of turns needed on the secondary coil. We know that the ratio for a transformer is as follows :
[tex]\dfrac{V_{out}}{V_{in}}=\dfrac{N_s}{N_P}\\\\N_s=\dfrac{V_{out}N_P}{V_{in}}\\\\N_s=\dfrac{1.5\times 150}{5}\\\\N_s=45\[/tex]
So, there are 45 turns in the secondary coil.
A monochromatic beam of light has a frequency of 6.5 x 10" hertz. What color is the light?
O orange
O yellow
O violet
O blue
Answer:
violet
Explanation:
Using the diagram above, the coefficient of kinetic friction for copper is ____ (Your answer should be given to the nearest thousandths.)
This coefficient _____ applies to all similar copper surfaces.
Answer:
μ= 0.0375, kinetic
Explanation:
For this exercise we set a reference system with the x axis parallel to the chord
Y axis
N - W = 0
N = W
X axis
T - fr = 0
the expression for the friction force is
fr = μ N
we substitute
T - μ W = 0
μ = T / W
we calculate
μ = 1.5 / 40
μ= 0.0375
coefficient of kinetic friction
A bird is standing on an electric transmission line carrying a large amount of current. Find the power dissipated by the bird If the
current it experiences is 1.35^-10 A which results in a potential difference of .0054V.
Side Note:
(I know the answer is 7.3 x 10^-11 W, I just don’t know how to get it)
P = 7.3 × 10^-13 Watt
Explanation:
First of all, are you sure that what you have is the right answer?
Anyway, the definition of power dissipated is given by
P = I^2×R
where I is the current and R is the resistance. But we also know from Ohm's law that
V = IR
so we can rewrite the equation for power P as
P = I^2R = I(IR) = VI
= (0.0054 volt)(1.35 × 10^-10 A)
= 7.3 × 10^-13 Watt
A student is building a model of a lens that will spread light over the biggest space. Which best describes the type of model the student should make?
O A The student should make a convex lens model because it directs light away from the center of the lens.
OB. The student should make a concave lens model because it breaks light down into bands of color
c. The student should make a concave lens model because it directs light away from the center of the lens
D. The student should make a convex lens model because it breaks light down into bands of color.
Answer:
C. The student should make a concave lens model because it directs light away from the center of the lens
Explanation:
The student should make a concave lens model because it directs light away from the center of the lens.
What is Concave lens?A lens that has at least one inward-curving surface is said to be concave. Since it is a divergent lens, light rays that have been bent by it are dispersed. Short-sightedness is treated by concave lenses, which are thinner in the center than the borders (myopia).
The earliest known usage of a corrective lens is mentioned in Pliny the Elder's writings (23–79). Pliny claims that Emperor Nero used an emerald, perhaps concave formed to adjust for myopia, to watch gladiatorial matches.
After passing through the lens, light beams appear to originate from a spot known as the primary focus.
Therefore, The student should make a concave lens model because it directs light away from the center of the lens.
To learn more about Concave lens, refer to the link:
https://brainly.com/question/2919483
#SPJ5
calculate the frequency of a wave using an equation
Answer:
1. f=1T. where: f is the frequency of the wave in hertz. T is the period of the wave in seconds.
2. f=vλ where: f is the frequency of the wave in hertz. v is the velocity of the wave in meters per second. λ is the wavelength of the wave in meters
3. f=cλ
Explanation:
A car accelerates at a rate of 13m/s^2[S]. If the car's initial velocity is 120km/h[N]. What will its final velocity be in m/s, after two seconds.
Answer:
the final velocity of the car is 59.33 m/s [N]
Explanation:
Given;
acceleration of the car, a = 13 m/s²
initial velocity of the car, u = 120 km/h = 33.33 m/s
duration of the car motion, t = 2 s
The final velocity of the car in the same direction is calculated as follows;
v = u + at
where;
v is the final velocity of the car
v = 33.33 + (13 x 2)
v = 59.33 m/s [N]
Therefore, the final velocity of the car is 59.33 m/s [N]
Atoms in Group 18 elements are inert (chemically unreactive) because ___________________________. A they combined to form molecules. B they have no valence electrons. C they have filled inner energy levels. D they have a full valence shell.
When you say full valence shell, are you talking about a valence electron shell?
I am learning about atoms and i know a little bit
Atoms in Group 18 elements are inert (chemically unreactive) because they have no valance electrons. The correct option is B.
What is valency?In chemistry, an element's valence or valency is the measure of its ability to combine with other atoms to form chemical compounds or molecules.
The number of atoms of one element combined with one atom of another element to form a molecule is referred to as its valency.
Valency is also referred to as molecular weight. Valency is a measure of an atom's combining power. The number of electrons in an element's outermost shell determines its valency.
Because of their full valence shells, noble gases are unreactive. They do not easily gain or lose electrons because they are already in the most stable electronic configuration.
Thus, the correct option is B.
For more details regarding valency, visit:
https://brainly.com/question/12744547
#SPJ6
Give three examples of the importance of gravity to humans?
A car accelerates at a rate of 13m/s^2[S]. If the car's initial velocity is 120km/h[N]. What will be its final velocity in m/s, after 2 seconds.
Answer:
the final velocity of the car is 59.33 m/s [N]
Explanation:
Given;
acceleration of the car, a = 13 m/s²
initial velocity of the car, u = 120 km/h = 33.33 m/s
duration of the car motion, t = 2 s
The final velocity of the car in the same direction is calculated as follows;
v = u + at
where;
v is the final velocity of the car
v = 33.33 + 13 x 2
v = 59.33 m/s [N]
Therefore, the final velocity of the car is 59.33 m/s [N]
How does the motion of the atoms in the spoon change when the spoon is placed in the hot coffee?
А
The atoms vibrate faster due to the conduction of heat through atoms in the spoon.
B
The atoms vibrate slower due to the conduction of heat through atoms in the spoon
С
The atoms move closer toward each other due to the radiation of heat through atoms in the spoon.
D
The atoms move away from each other due to the convection of heat through atoms in the spoon.
Answer:
A.The atoms vibrate faster due to the conduction of heat through atoms in the spoon.
If the temperature (at constant volume) of an ideal gas with 20 K is increased to 60 K, the pressure will be:
increased to 3P
increased to 40P
decreased by 3P
decreased by 40P
Answer:
it will obviously be decreased by 40p
Of all of the structures in a cell, which actually contains the cell's DNA? A. Mitochondria B. Cell membrane C. Nucleus D. Cytoplasm
Answer:
C. Nucleus
Explanation:
The nucleus, formed by a nuclear membrane around a fluid nucleoplasm, is the control center of the cell. Threads of chromatin in the nucleus contain deoxyribonucleic acid (DNA), the genetic material of the cell.
have a good day and here’s a funny comic just for fun! :)
5 points
The figure below shows two people ice-skating. Person A collides with
person B. After the collision they move together with the same velocity.
Calculate the mass, m, of person B.
Before collision
After collision
Person A
mass = 60 kg
Person B
mass, m
Person A and person B
moving off together
Speed of
Person A -
5.5 m/s
Speed of
Person B -
2.0 m/s
Speed of Person A and
Person B = 4.0 m/s
mB = 45 kg
Explanation:
Using conservation of linear momentum,
mAvA + mbvB = (mA + mB)v
(60 kg)(5.5 m/s) + (2.0 m/s)mB = (60 kg + mB)(4.0 m/s)
(330) + 2mB = 240 + 4mB
2mB = 90
mB = 45 kg
Ellie cycled from her home to her friend’s house. She stayed at her friend’s house and then travelled home.
a. At what time did Ellie leave home?
b. How far was Ellie from home while visiting her friend?
c. How long did Ellie stay at her friend’s house?
An astronaut in space cannot use a conventional means, such as a scale or balance, to determine the mass of an object. But she does have devices to measure distance and time accurately. She knows her own mass is 78.4 kg, but she is unsure of the mass of a large gas canister in the airless rocket. When this canister is approaching her at 3.50 m/s, she pushes against it, which slows it down to 1.20 m/s (but does not reverse it) and gives her a speed of 2.40 m/s. What is the mass of this canister
Answer:
81.81 kg
Explanation:
[tex]m_1[/tex] = Mass of person = 78.4 kg
[tex]m_2[/tex] = Mass of canister
[tex]u_1[/tex] = Initial velocity of person = 0
[tex]u_2[/tex] = Initial velocity of canister = 3.5 m/s
[tex]v_1[/tex] = Final velocity of person = 2.4 m/s
[tex]v_2[/tex] = Final velocity of canister = 1.2 m/s
The momentum balance in the system is given by
[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2\\\Rightarrow 78.4\times 0+m_2\times 3.5=78.4\times 2.4+m_2\times 1.2\\\Rightarrow m_2=\dfrac{78.4\times 2.4}{3.5-1.2}\\\Rightarrow m_2=81.81\ \text{kg}[/tex]
Mass of the canister is 81.81 kg.