Under which of the following sets of conditions is a real gas expected to deviate from ideal behavior?
(I) High pressure, small volume.
(II) High temperature, low pressure.
(III) Low temperature, high pressure
A. Only I
B. Only II
C. Only III
D. I and III both
Answer: D

pressure: A>B, RMS: A<B, kinetic energies: A=B

All perfect gases would have the same molarity since they have same number density.It'll be 22.4 L at STP.This is helpful if you really want to visualize the separation of molecules in various samples.

According to Avogadro's hypothesis, all gases have an equal number of particles in an equal volume at a given temperature and pressure.The actual particle size themselves is almost negligible because the majority of a gas's volume is made up of the void space between its particles.

To know more about gases visit:

https://brainly.com/question/1369730

#SPJ4

These are the nuclear reactions of the unstable nuclide.

What is nuclear equation?

An equation that specifies the nuclides involved in the reaction, their mass numbers and atomic numbers, as well as the other particles involved in the reaction, is used to describe nuclear reactions.

What is unstable nuclide?

In their valence shell, they have two or eight electrons. They don't acquire, shed, or share electrons.

The ratio of the number of neutrons (N)

to the number of protons (Z)

determines the most likely mode of decay. The atomic number of an atom is represented as the number of protons (Z)

The difference between mass number(A)

and atomic number is represented as the number of neutrons(N). According to the (N/z)

value, the type of decay can be identified.

The nuclear stability belt is drawn between the number of neutrons taking at the y- axis and number of protons at the x- axis. Those lying above or below the belt are unstable nuclides while those lying at the belt are stable nuclides. This belt helps to determine the type of decay that occurs in a species, whether it is alpha decay, beta decay, positron decay or electron capture.

Number of protons (Z)= atomic number

Number of  neutrons (N) = mass number(A)-  atomic number(z)

If (N/z)

value is greater than 1, then it undergoes β decay. This is because the element has more neutrons and it can tend to convert into a proton by beta decay. The daughter nucleus produced from this decay has increased the atomic number by 1 unit compared to the parent nuclei and there is no change in the mass number.

X= parent nucleus

Y= daughter nucleus

If  (N/z)

value is less than 1, then it undergoes positron emission. This is because the element has less neutrons and it cannot tend to convert into a proton. Therefore, it undergoes positron emission in which the daughter nucleus produced from this decay has decreased the atomic number by 1 unit compared to parent nuclei and there is no change in the mass number.

X= parent nucleus

Y= daughter nucleus

If  (N/z)

ratio is too low with greater than atomic number of 82, there are too many protons and the nuclide will undergo alpha decay. The alpha decay for any element X is shown below.

A               A-4               4

       X                    Y+         a

Z                Z-2                2

The most likely mode of decay for the given unstable nuclide is as follows.

Therefore, these are the nuclear reactions of the unstable nuclide.

Learn more about nuclide from the given link

https://brainly.com/question/13421378

#SPJ4

The conversion factor that you will need to use is Avogadro's Number.

What is Avogadro's  number?

The number of units in a mole of any substance, which is determined by its molecular weight in grams, is equal to 6.02214076 1023. Depending on the composition of the substance and the characteristics of the reaction, the units may be electrons, atoms, ions, or molecules.

What is atom?

An atom is a unit of matter that specifically characterizes a chemical element. One or more negatively charged electrons surround the central nucleus of an atom, which is made up of all of them. One or more protons and neutrons, which are relatively heavy particles, can be found in the positively charged nucleus.

Firstly, we will divide the given number of atoms by Avogadro's number to find the number of moles. After finding moles, we will multiply them with molar mass to find the weight of graphene containing given number of atoms.

Therefore, conversion factor that you will need to use is Avogadro's Number.

Learn more about  Avogadro's Number from the given link.

https://brainly.com/question/1513182

#SPJ4

2Ag+(aq)+Ni(s)→2Ag(s)+Ni2+(aq)2Ag+(aq)+Ni(s)→2Ag(s)+Ni2+(aq).

Ni (s), Ni+2 (aq), and two e- As the Ni releases two electrons to form Ni+2, the Silver ion must accept two electrons to balance the net reaction, therefore two silver ions will absorb two electrons to form silver. 2 e- 2 Ag + 2 Ag+ (aq) (s).

What is Redox reaction?

Redox reactions are oxidation-reduction chemical processes in which the oxidation states of the reactants change. Redox is a shortened version of reduction-oxidation. Two distinct processes—a reduction process and an oxidation process—can be used to describe all redox reactions.

Redox or Oxidation-Reduction processes always involve simultaneous oxidation and reduction reactions. In a chemical reaction, the material that is being reduced is referred to as the reducing agent, while the substance that is being oxidized is the oxidizing agent.

A chemical process in which electrons are moved between two reactants is referred to as a redox reaction. The alteration in the oxidation states of the reacting species can be used to pinpoint this electron transfer.

To learn more about Redox reaction

https://brainly.com/question/21851295

#SPJ4

it false john weighs 85 pounds. jeff weighs 105 pounds. jake weighs 115 pounds. two of them standing together on the same scale could weigh 200 pounds.

A pounds is defined as 16 ounces, 7,000 grains (or 0.45359237 kg) of avoirdupois weight and 12 ounces, 5,760 grains (or 0.37324171216 kg) of troy and apothecaries' weight. The letter lb comes from the Roman libra, which was the forerunner of the modern pound. The pound, also known as pound-mass, is a unit of mass that is used in both the British imperial and American customary measurement systems.

Balance Analytical These are most frequently discovered in laboratories or other locations where weighing items requires a high level of sensitivity. In analytical balances, mass is measured. Chemical analysis is always based on mass, so the results are never based on localized gravity, which would have an impact on the weight.

Learn more about pounds here:

https://brainly.com/question/27994061

#SPJ4

The number of moles of propane that reacts when 294g of carbondioxide forms is 2.23 moles.

Stoichiometry is the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions (chemical equations).

According to this question, propane gas undergoes a combustion reaction with oxygen to form carbondioxide and water as follows:

C₃H₈ + 5O₂ → 3CO₂ + 4H₂O

Based on the balanced equation above, 1 mole of propane is required to produce 3 moles of carbondioxide.

moles of carbondioxide = 294g ÷ 44g/mol = 6.68mol

moles of propane needed = 6.68 × ⅓ = 2.23moles

Therefore, 2.23 moles of propane is required to produce 294g of carbondioxide.

Learn more about stoichiometry at: https://brainly.com/question/9743981

#SPJ1

two aqueous solutions are mixed in the calorimeter shown to determine the heat of the reaction. after measuring the change in temperature of the water bath, the equation used is q = c*m*(change in temperature).

A calorimeter is a device used in calorimetry, a procedure for calculating heat capacity and measuring the heat of chemical processes or other physical changes. Among the most popular kinds are differential scanning calorimeters, isothermal micro calorimeters, titration calorimeters, and accelerated rate calorimeters.

It can be used to measure change on the temperature, ultimately helping in calculating heat transferred.

To know more about calorimeter, click here,

brainly.com/question/22504881

#SPJ4

Enzymes speed up the reaction of the substrate by lowering the activation energy.

Substrates are the substances on which an enzyme act. In enzymes, the substrate interacts with the side chain of amino acids which leads to the formation or breaking of bonds. The interaction of a substrate molecule with an enzyme must occur before it is transformed into a product.  The place of interaction between an enzyme and a substrate is known as an active site.

After the formation of the product, the enzymes remains intact which means they get back to there original form.

Therefore, enzymes speed up the reaction and remain the same after the formation of product.

To learn more about enzymes check the link below:

https://brainly.com/question/1596855

#SPJ4

Aqueous solutions of sodium sulfate ( Na₂SO₄ ) and barium chloride are mixed, then the precipitate formed is barium sulphate ( BaSO₄ ). Therefore, option 4 is correct.

The inorganic substance having the chemical formula BaSO4 is called barium sulfate. It is a tasteless, crystalline white substance that is insoluble in water. The main commercial source of barium and the materials made from it is the mineral barite, which is where it naturally occurs.

Barium sulfate and sodium chloride are created when barium chloride (BaCl2) and sodium sulfate (Na2SO4) react. The above-mentioned reaction produces a white precipitate as a result of the creation of barium sulphate.

Thus, option 4 is correct,

To learn more about barium sulphate, follow the link;

https://brainly.com/question/22119786

#SPJ1

According to VSEPR theory the shape of the molecule is trigonal bipyramidal.

The VSEPR theory postulates that the shape of a molecule can be predicted by the electron pairs that surround the central atoms of the molecule. The valence shell electron pair repulsion (VSEPR) uses 3-D molecular geometry.

The VSEPR is a geometry that minimizes repulsion between electrons. The shape of the molecule is "trigonal bipyramidal" because of the presence of 2 single bonds in the X atom atom attached to the Y atom. The 5 main shapes of VSEPR are linear, trigonal planar, tetrahedral, trigonal bipyramidal and octahedral.

The full question is:

A Lewis structure is a two-dimensional representation of a molecule that does not necessarily show what shape that molecule would take in three dimensions. From the given Lewis structure and what you know about VSEPR theory, identify the shape of the molecule. A molecule with atom Y single bonded with 2 X substituents. The Y atom has two lone pairs.

Learn more on VSEPR theory here: https://brainly.com/question/17177984

#SPJ1

The mass of the oxygen that has been reacted is 2.72 g.

We know that the term stoichiometry has to do with the way that we can be able to obtain the parameter of a reaction by looking at the balanced reaction equation of the reaction as it were.

We can see from the question that the balanced chemical reaction equation  can be written as;  2 Mg +0₂ → 2 MgO

Number of moles of Mg = 4.0 g/24 g/mol

= 0.17 moles

Now;

2 moles of Mg reacted with 1 mole of oxygen

0.17 moles would  now react with 0.17 moles * 1 mole / 2moles

= 0.085 moles

Mass of oxygen reacted =  0.085 moles * 32 g/mol = 2.72 g

Learn more about stoichiometry:https://brainly.com/question/9743981

#SPJ1

The molarity of a 97.62 (m/m) % acetic acid solution given that the solution density is 1.05 g/ml is 17.5M.

Reason:

Glacial acetic acid is 100% acetic acid. The MW of acetic acid is 60. The density of acetic acid (100%) is 1.05. So in 1 L we have 1.05 Kg. The number of moles of acetic acid is then 1050 g divided by 60 = 17.5 mol. So the molarity is 17.5 mold/L or 17.5 M.

Learn more about Acetic Acid Solution:

https://brainly.com/question/16737443

#SPJ4

The density of a gas with a molar mass of 28.011gmol at 281 k and 1.90 atm is 2.30 g/l or grams per liter.

The formula for the ideal gas constant is PV= nRT

[tex]\frac{P}{RT}= \frac{n}{V}[/tex] = molarity

[tex]\frac{n}{V}[/tex] = molarity

Using M = molar mass to multiply both sides, we obtain

[tex]\frac{PM}{RT} = \frac{nM}{V}[/tex]

We can write [tex]\frac{PM}{RT}[/tex]= ρ.......equation (i)

since density, ρ = [tex]\frac{mass}{volume}[/tex] and

density, ρ= [tex]molarity*molar mass (\frac{nM}{V})[/tex]

After plugging in all the numbers in equation (i), we get

ρ= [tex]\frac{ 1.90*28.011}{281*0.082}[/tex]

ρ= [tex]\frac{522090}{2304200}[/tex]

ρ= 2.30 g/l.

To learn more about molar mass, refer:-

https://brainly.com/question/22997914

#SPJ4

According to the statement you do every time you are setting up glassware for a vacuum filtration are:

1. Check that there are no cracks or defects in the glassware.

2. Ensure that the glassware is designed for use with a vacuum.

3. Inspect the tubing for any holes.

By removing the air beneath the filter paper, vacuum filtration maintains a pressure differential across the filter media. Filtration under a vacuum accelerates the process and exerts a force on the mixture in addition to gravity.

The collection of a particle (bacteria, precipitate, etc.) from with a liquid suspension typically involves vacuum filtration in microbiological and laboratory operations.

Vacuum and gravity filtering differ primarily in their efficiency and mode of operation. The filtration is powered by one technique, which employs a vacuum source, and by the other, which uses gravity. Vacuum filtering becomes quicker and more practical as a result. However, it doesn't apply to all experiments.

To know more about vacuum filtration visit:

https://brainly.com/question/28503164

#SPJ4

The formula for aluminum chloride is correctly written as AlCl₃.

What is aluminum chloride?

Chemically speaking, aluminum chloride has the formula AlCl3. It frequently exhibits a yellow hue when polluted with iron chloride as opposed to the white of the pure product. Lewis bases are employed in a variety of chemical processes; the most often utilized Lewis acid is anhydrous aluminum trichloride.

Excessive perspiration can be managed with aluminum chloride (a LOO minum klor ide). Other use for this medication are possible.

Therefore,  The formula for aluminum chloride is correctly written as AlCl₃.

To learn more about aluminum chloride

Here: https://brainly.com/question/26851161

#SPJ4

Potassium is positively charged inside the cell, sodium is positively charged outside the cell, phosphate is negatively charged inside the cell, and chloride is negatively charged outside the cell.

Blood clotting, muscular movements, acid equilibrium, and fluid control can all be affected when your body is low on electrolytes. Electrolytes aid in the regulation of your heartbeat because your heartbeat is a muscle.

Drinks like isotonic drinks, milk, apple juice, other juice drinks can all help with electrolyte balance and hydration. For the majority of people, maintaining electrolyte levels only necessitates a well-balanced diet and enough water to drink.

To know more about Electrolytes visit:

https://brainly.com/question/14566383

#SPJ4

The balanced chemical reaction for the complete neutralization between HNO₃ and Ba(OH)₂ is given as,

2 HNO₃ (aq) + Ba(OH)₂ (aq) → Ba(NO₃)₂ + 2 H₂O

Balanced equations

In order to balance the equation, the component atoms in the reactants and products must be the same in terms of number and mass.

Thus, in the above chemical equation, the number atoms of H, N, O, and Ba in the reactants and the products must be equal.

Therefore, the overall equation for the chemical reaction is,

2 HNO₃ (aq) + Ba(OH)₂ (aq) → Ba(NO₃)₂ + 2 H₂O

Learn more about balanced chemical equation from the link given below.

https://brainly.com/question/2289653

#SPJ4

The number of kilowatt-hours of electricity required to produce 4.60kg of metallic sodium from the electrolysis of molten NaCl(s) is 3.13 kWh when the applied emf is 4.50V

An equation for the reaction can be given as follows;

[tex]Na^{+} + e^{-} ---- > Na (s)[/tex]

Hence, the moles of Na is equal to the moles of electron used

Therefore, we can calculate the number of moles of sodium as follows;

No of moles = mass ÷ molar mass

No of moles = 4600 g ÷ 23 g/mol     (As 1 kg = 1000 g)

No of moles =  200 mol

As Q = n × F;  where F represents  Faraday's constant

Q = 200 mol × 96500 C

Q = 19,300,000 mol C

The relation between electrical energy and Q is as follows;

E = Q × V

Now we can substitute the given values into the above formula and then calculate the value of electricity as follows;

E = 19,300,000 × 4.50

E = 86,850,000 J

As 1 J = 2.77 × 10^-7 kWh

Therefore;

86,850,000 ÷ 2.77 × 10^-7  kWh = 3.13 kWh

Hence, we can conclude that 3.13 kilowatt-hours of electricity is required to produce 4.60kg of metallic sodium from the electrolysis of molten NaCl(s)

To learn more about electrolysis; click here:

https://brainly.com/question/12629784

#SPJ4

The energy released inside the alpha decay for 238 92u is 5.5862 MeV in this equation.

Energy can take on a variety of shapes. Examples of these include: electric power, sound energy, energy source, nuclear or atomic energy, light energy, generate heat, mechanical energy, gravity force, and so on. Each form has the potential to migrate or transform into the others. Because it's a basic human necessity, energy plays a major role in our daily lives. Our human-made structures are not only heated by energy, but also cooled by it.

The deterioration is spelled as ²³⁸Pu→²³⁴U+⁴He

Its energy released, or its Q value, is provided by

Q=[238.04955−234.04095−4.002603]c(2)u

=0.005997×931.5MeV

=5.5862 MeV.

To know more about energy visit:

brainly.com/question/5144470

#SPJ4

Alloy is a substance formed from the combination of two or more metals. It can be combinations of other elements also. To determine the chemical composition of an alloy (or any metal) are X-ray fluorescence spectroscopy (XRF) and optical emission spectroscopy (OES) are the two main methods used.  

How to find weight composition of an alloy?

Given data

The composition of alloy is:

CAg=94.1%, Ag=0.941C

Ccu=5.9%, Cu=0.059C

The atomic weight of Ag is: WAg=107.87g/mol

The atomic weight of Cu is: WCu=63.55g/mol

The percentage composition for Ag.

PCAg=CAgWAgCAgWAg+CCuWCu×100PCAg=CAgWAgCAgWAg+CCuWCu×100

Substitute the given value.

PCAg=0.941×107.87g/mol0.941×107.87g/mol+0.059×63.55g/mol×100

=96.43%PCAg

=0.941×107.87g/mol0.941×107.87g/mol+0.059×63.55g/mol×100

Thus main answer is =96.43%

The percentage composition for Cu.

PCCu=CCuWCuCAgWAg+CCuWCu×100PCCu=CCuWCuCAgWAg+CCuWCu×100

Substitute the given value.

PCCu=0.059×63.55g/mol0.941×107.87g/mol+0.059×63.55g/mol×100

=3.56%PCCu

=0.059×63.55g/mol0.941×107.87g/mol+0.059×63.55g/mol×100

Thus, main answer is =3.56%

Thus, the percentage composition of Ag is 96.43%96.43% and percentage composition of Cu is 3.56%3.56%.

So, the option (b) is correct.

To know more about alloy, click on https://brainly.com/question/16935193

#SPJ4

When the temperature is 5 k and there are 2 molecules per cm3, the pressure is 1.38*1016 Nm2.

What degree of heat is too much for people?

People frequently cite a 2010 study that concluded that the highest limit of safety, above which the human body can no longer cool itself by draining sweat from the body's surface, would be a wet-bulb temperature of 35 C, or 95 F at 100% humidity or 115 F at 50% humidity.

Where on earth is it the hottest?

The world's hottest air temperature was recorded at Death Valley: Temperatures in the California desert's aptly called Furnace Creek region peaked on July 10th, 1913, at

Briefing:

P = nKT/V

 = 2*1.38*10⁻²³*5/10⁻⁶

 = 1.38*10⁻¹⁶ Nm⁻²

To now more about temperature visit:

https://brainly.com/question/11464844

#SPJ4

The carbonic hardness is 131.1475 mg/L, non carbonic hardness is 243.442 mg/L and total hardness is 345.833 mg/L.

Anions - they're shaped when non-metal profits the electrons. They benefit one or a couple of electron. consequently, they own a net poor price. a few examples of anions are Iodide (I–), chloride (Cl–), hydroxide (OH–).

Calculation:-

Total hardness - is sue to multivalent cations.

The multivalent cations in the given questions are Ca²+ and Mg ²+.

= 237.5 + 108.33

= 345.833 mg/L of CaCo3.

Carbonceous hardness - is due to HCO3-

Therefore carbonaceous = 160/60/1 (100/2) as CaCO3

= 131.1475 mg/L

Non carbonaceous hardness - is due ti cl- and SO4- anions.

= 135/96/2 × 100/2

= 243.442 mg/L as CaCo3.

Carbonate is a polyatomic anion with the components CO2−3 and has a trigonal planar molecular shape which includes a carbon atom surrounded via 3 oxygen atoms. The carbonate ion is a reasonably sturdy base, so through definition of a Lewis base, it draws protons in aqueous solutions.

Learn more about water here:-

brainly.com/question/1313076

#SPJ4

When comparing the use of red cabbage indicator and phenolphthalein,  the one give more useful results is red cabbage indicator.

The red cabbage indicator is most useful . the red cabbage indicator gives different colors based on the solution whether it  is acidic solution , basic solution or neutral solution. the red cabbage indicate gives separate color for each the these different states. the red cabbage indicator contains the a chemical known as anthocyanin. the red cabbage give red or pink color when the solution is acidic. the  red cabbage indicator  give purple color when the solution is neutral. the  red cabbage indicator gives blue, green yellow color when the solution is basic.

Thus, the red cabbage indicator is more useful as compared to the phenolphthalein .

To learn more about  red cabbage indicator here

https://brainly.com/question/16060048

#SPJ4

The two main elements that are found in ceramics are Oxygen and silicon.

Ceramics are extra than pottery and dishes: clay, tiles, glass, as well as cement are in all likelihood the best-regarded examples. Ceramic substances are utilized in electronics because, relying on their composition, they'll be semiconducting, superconducting, ferroelectric, or an insulator. They are hard wearing, resistant to high temperatures and good corrosion resistance.

Therefore, option d is the correct choice as the two main elements are silicon and oxygen.

To learn more about Ceramics check the link below:

https://brainly.com/question/20491242

#SPJ4

Both Na and K use passive diffusion across the plasma membrane to leak channels.

The plasma membrane, also known as the cell membrane, is the membrane that separates the interior of a cell from its external environment. It may be found in all types of cells. A cell wall connects the plasma membrane to the outside of both bacterial and plant cells. The plasma membrane protects the cell from its surroundings while simultaneously controlling cellular mobility and sending signals. The plasma membrane, according to the fluid mosaic model, is a patchwork of phospholipids. Non-gated ion channels are ones that are always open. Because they simply allow ions to pass through the channel without causing any damage.

To learn more about diffusion please click on below link

https://brainly.com/question/13513898

#SPJ4

It is acidic shampoo. Not basic, but in between acidic and neutral. Because basic shampoo would be harmful in this situation. The basic ph of soap is incorrect.

Once or twice will not harm your hair when you wash it with soap, but frequent washings with bar soap can lead to serious issues including roughness and severe tangles. Choose a shampoo instead to clean your hair. Dry shampoo is an excellent option for your hair if you wish to forgo shampoo.

You can wash your hair with soap, but if you're used to using liquid shampoo, the results will probably not be satisfactory.

Learn more about shampoo here:

https://brainly.com/question/11192467

#SPJ4

Answer:

650cm

Explanation:

1m = 100cm

6.50m = 650cm

The combustion of ammonia in the prescne of excess oxygen yield no2 and h2o. 0.119  grams of no2 are produced when 43.9mg of ammonia burn.

Molar mass of NH3 = 1*MM(N) + 3*MM(H)

= 1*14.01 + 3*1.008

= 17.034 g/mol

mass of NH3 = 0.0439 g

mol of NH3 = (mass)/(molar mass)

= 0.0439/17.034

= 2.577*10^-3 mol

From balanced chemical reaction, we see that

when 4 mol of NH3 reacts, 4 mol of NO2 is formed

mol of NO2 formed = moles of NH3

= 2.577*10^-3 mol

Molar mass of NO2 = 1*MM(N) + 2*MM(O)

= 1*14.01 + 2*16.0

= 46.01 g/mol

mass of NO2 = number of mol * molar mass

= 2.577*10^-3*46.01

= 0.119 g

To learn more about Molar mass visit:https://brainly.com/question/22997914

#SPJ4

The two-sided confidence interval is (87.85 ≤ μ ≤ 93.11) , with 87.85 being the lower level and 93.11 being the upper level.

The amount of product you actually get after doing an experiment is known as the experimental yield. Calculating the % yield will show you how much of the theoretical yield you actually achieved in a particular experiment. The quantity of pure and dry product produced in a chemical reaction is known as the reaction yield (absolute yield). The relative or percentage yield (%) is typically determined in order to assess the effectiveness of a chemical process in organic synthesis.

The percent yield can be calculated by applying the following formula:%yield = (actual yield/theoretical yield) x 100.

Step-by-step explanation:

Given the data:

91.6, 88.75, 90.8, 89.95, 91.3

Mean, m = Σx / n

n = sample size = 5

Mean = 452.4 / 5 = 90.48

Standard deviation, σ = 3

Zcritical at 95% = 1.96

Confidence interval :

Mean ± Error margin

Error margin = Zcritical*σ/sqrt

Error margin = 1.96 * 3/sqrt(5)

Error margin = 2.630

Lower boundary : 90.48 - 2.630 = 87.85

Upper boundary : 90.48 + 2.630 = 93.11

(87.85 ; 93.11)

To know more about Yield of a Chemical visit:

https://brainly.com/question/14408642

#SPJ4

To restore acid rain to its natural pH, Sulphur should be present in lower proportions in the atmosphere. Sulphur dioxide emissions mixed with nitrogen oxide emissions cause acid rain.

Both substances interact with airborne molecules including water, oxygen, and other molecules to produce this effect. Particularly when it comes to aquatic life, this phenomena is exceedingly hazardous for both people and other animals and plants. For example, the elevated pH prevents several kinds of freshwater fish from developing or growing. When the pH is even lower, however, in some situations, the organisms are unable to survive and eventually perish. Therefore, a decrease in atmospheric Sulphur concentrations could lessen acid rain and bring rain back to its normal pH in the atmosphere.

Learn more about Sulphur here

https://brainly.com/question/23535995

#SPJ4