Un prisma rectangular de cobre, de base igual a 36 centímetros cuadrados y una altura de 10 cm se sumerge hasta la mitad por medio de un alambre en un recipiente que contiene alcohol ¿que volumen de alcohol desaloja?

Answer:

Vf = 34.3 m/s

1st equation of motion was used to solve.

Explanation:

In order to find the final speed of the cow, when it hits the bushes, we can use first equation of motion:

Vf = Vi + gt

where,

Vf = Final Velocity of Cow = ?

Vi = Initial Velocity of Cow = 0 m/s

g = acceleration due to gravity = 9.8 m/s²

t = time taken = 3.5 s

Therefore,

Vf = 0 m/s + (9.8 m/s²)(3.5 s)

Vf = 34.3 m/s

1st equation of motion was used to solve.

Answer:

800 kg

Explanation:

I just did it :)

Answer:

The moment of a given force about a given axis of rotation can be decreased by decreasing the perpendicular distance of force from the axis of rotation.

Answer:

hope it helps...

Explanation:

The moment of a given force about a given axis of rotation can be decreased by decreasing the perpendicular distance of force from the axis of rotation.

Answer:

Mechanical advantage = 20

Explanation:

Given:

Output force = 8,000 N

Input force = 400 N

Find:

Mechanical advantage

Computation:

Mechanical advantage = Output force / Input force

Mechanical advantage = 8,000 / 400

Mechanical advantage = 20

Answer:

Both the initial and final substances are composed of atoms because all matter is composed of atoms. According to the law of conservation of matter, matter is neither created nor destroyed, so we must have the same number and kind of atoms after the chemical change as were present before the chemical change.

Explanation:

Answer:

The law of conservation of atoms is simple but it has a great affect. An atom cannot be destroyed by such a force. Matter/atoms can't be created by any means. An atom exits only by nature and not by force.

Hope this helped! Please mark brainliest! Have a great day!

Answer:

d

Explanation:

Answer:

a = 0.98J

Explanation:

PE = mgh

PE = 0.1 x 9.8 x 1

PE = 0.98J

(a) The potential energy of the car at the beginning of the experiment is 9.8(m) J.

(b) The kinetic energy of the car for group a is 3.125(m) J.

(c) The kinetic energy of the car for group b is 4.5(m) J.

The potential energy of the car is calculated as follows;

P.E = mgh

where;

P.E = m x 9.8 x 1

P.E = 9.8(m) J

K.E = ¹/₂mv²

K.E = ¹/₂ x m x (2.5)²

K.E = 3.125(m) J

K.E = ¹/₂mv²

K.E = ¹/₂ x m x (3)²

K.E = 4.5(m) J

Learn more about kinetic energy here:https://brainly.com/question/25959744

#SPJ2

Answer:

B. Law of Conservation of Mass

Explanation:

In other words, the mass of any one element at the beginning of a reaction will equal the mass of that element at the end of the reaction. If we account for all reactants and products in a chemical reaction, the total mass will be the same at any point in time in any closed system.

Answer:

1) The velocity of the ball return to the thrower's hand is -15 meters per second.

2) The resulting velocity of the boat is [tex]\vec v_{B} = 6\,\hat{i}+18\,\hat{j}\,\left[\frac{m}{s} \right][/tex].

Explanation:

1) Let suppose that ball experiments a free fall, that is an uniform accelerated motion, in which effects from gravity and Earth's rotation can be neglected. The velocity of the ball is represented by the following equations of motion:

Position

[tex]v_{o}\cdot t -\frac{1}{2}\cdot g\cdot t^{2} = 0[/tex]

[tex]t\cdot \left(v_{o}-\frac{1}{2}\cdot g\cdot t \right) = 0[/tex] (1)

Velocity

[tex]v = v_{o}-g\cdot t[/tex] (2)

Where:

[tex]t[/tex] - Time, measured in seconds.

[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.

[tex]v_{o}[/tex] - Initial velocity of the ball, measured in meters per second.

[tex]v[/tex] - Final velocity of the ball, measured in meters per second.

From (1), we get the time when the ball returns to the thrower's hand:

[tex]v_{o}-\frac{1}{2}\cdot g\cdot t = 0[/tex]

[tex]t = \frac{2\cdot v_{o}}{g}[/tex]

And then we apply this result in (2):

[tex]v = v_{o}-g\cdot \left(\frac{2\cdot v_{o}}{g} \right)[/tex]

[tex]v = -v_{o}[/tex] (3)

Then, the velocity of the ball return to the thrower's hand is -15 meters per second.

2) The resulting velocity of the boat ([tex]\vec v_{B}[/tex]) is represented by the vectorial sum of the velocity of the boat relative to the river ([tex]\vec v_{B/R}[/tex]) and the velocity of the river ([tex]\vec v_{R}[/tex]), both measured in meters per second, that is:

[tex]\vec v_{B} = \vec v_{R}+\vec {v}_{B/R}[/tex] (4)

If we know that [tex]\vec v_{R} = 6\,\hat{i}\,\left[\frac{m}{s} \right][/tex] and [tex]\vec v_{B/R} = 18\,\hat{j}\,\left[\frac{m}{s} \right][/tex], then the resulting velocity of the boat is:

[tex]\vec v_{B} = 6\,\hat{i}+18\,\hat{j}\,\left[\frac{m}{s} \right][/tex]

The resulting velocity of the boat is [tex]\vec v_{B} = 6\,\hat{i}+18\,\hat{j}\,\left[\frac{m}{s} \right][/tex].

Answer:

B food coloring will move quicker in hot water because the molecules move faster when they are hot

Explanation:

SCIENCE! aaaaand my physics text book

Option B is correct:  The food coloring in the hot water will spread more quickly than in the cold water because water molecules move more quickly when hot since they have more kinetic energy.

According to the question, we place a drop of blue food coloring in a cup of cold water and another drop of food coloring in a cup of hot water and then observe the spreading of the blue color in both the cups.

Option B will be correct because the kinetic energy of the molecules of a gas or a liquid is directly proportional to the absolute temperature of the gas or the liquid.

High kinetic energy means that the molecules will have higher velocity, which will make it easier for any solvent to dissolve in water since it will spread faster.  

So the cup which has water at a higher temperature will have a faster spread of the food coloring.

Learn more about kinetic energy:

https://brainly.com/question/12669551?referrer=searchResults

Question:

A cork floats on the surface of an incompressible liquid in a container exposed to atmospheric pressure. The container is then sealed and the air above the liquid is evacuated. The cork:

A. sinks slightly  

B. rises slightly  

C. floats at the same height  

D. bobs up and down about its old position

Answer:

The correct answer is C)  floats at the same height  

Explanation:

The liquid is incompressible because its density very high and leaves no room for further compaction whether or not there is atmospheric pressure. So when you put a cork on the liquid, pressure or no pressure, there is no displacement hence it floats on the same height regardless of the absence of air.

Cheers!

Answer:

The kinetic energy is 600 J

Explanation:

Mechanical Energy

The principle of the conservation of mechanical energy states that the total mechanical energy in a system remains constant as long as the only forces acting are conservative forces.

The mechanical energy is defined as the sum of the potential plus kinetic energies:

E = U + K

Where E is the total mechanical energy, U is the gravitational potential energy and K is the kinetic energy.

Solving for K:

K = E - U

The system described has a total mechanical energy of E=950 J and gravitational potential energy of U=350 J, thus:

K = 950 J - 350 J

K = 600 J

The kinetic energy is 600 J

Answer:

35.28m/s; 63.50m

Explanation:

Given the following data;

Time, t = 3.6 secs

Since it's a free fall, acceleration due to gravity = 9.8m/s²

Initial velocity, u = 0

To find the final velocity, we would use the first equation of motion;

[tex] V = u + at[/tex]

Substituting into the equation, we have;

[tex] V = 0 + 9.8 * 3.6[/tex]

V = 35.28m/s

Therefore, the final velocity of the penny is 35.28m/s.

To find the height, we would use the second equation of motion;

[tex] S = ut + \frac {1}{2}at^{2}[/tex]

Substituting the values into the equation;

[tex] S = 0(3.6) + \frac {1}{2}*9.8*(3.6)^{2}[/tex]

[tex] S = 0 + 4.9*12.86[/tex]

[tex] S = 0.5 *36[/tex]

S = 63.50m

Therefore, the height of the tower is 63.50m.

Answer:

11 times the weight of Philip.

Explanation:

From the question given above, the following data were obtained:

Weight of Melissa (i.e cow) = 0.65 tons

Weight of Philip (i.e rabbit) = 192 ounces

Next, we shall express the weight of Philip (i.e the rabbit) in tons. This can be obtained as follow:

1 ounce = 3.125×10¯⁵ ton

Therefore,

192 ounce = 192 ounce × 3.125×10¯⁵ ton / 1 ounce

192 ounce = 0.06 ton

Thus, the weight of Philip (i.e the rabbit) in ton is 0.06 ton.

Next, we shall determine the ratio of the weight of Melissa (i.e the cow) to the weight of Philip (i.e the rabbit). This can be obtained as follow:

Weight of Melissa (i.e cow) = 0.65 ton

Weight of Philip (i.e rabbit) = 0.06 ton

Melissa /Philip = 0.65/0.06

Melissa /Philip = 11

Melissa = 11 × Phillip

Thus, it will take 11 times the weight of Philip to weigh as much as Melissa.

Answer:

60 km per hour

Explanation:

if you drive for 30 min and go 30km then if you drive for 60 min(1hr) then you would have driven 60km.

Answer:

60

Explanation:

hope this helps

Answer:

The musculoskeletal system involves the complex interactions of muscles, bones, and connective tissues.

When a muscle contracts, a bone will move. When a bone contracts, a muscle will move. When a ligament contracts, a tendon will move.

Answer:

A. when a muscle contracts , a bone will move

Explanation

thats the correct answer to this question on edg2021 :)

Answer:

The correct option is;

c. 22.6

Explanation:

The given parameters are;

The hypotenuse of the vector = 32

The angle of the vector = 45°

Therefore, the vector component in the y-axis is given as follows;

[tex]v_y = v \times sin(\theta)[/tex]

Substituting the values from the question gives;

[tex]v_y = 32 \times sin(45^{\circ}) \approx 22.6[/tex]

The vector component in the y-axis, [tex]v_y[/tex], is approximately 22.6.

b=36•3

momentum=mass×velocity

The total momentum of the given system is equal to zero. Therefore, option (C) is correct.

The linear momentum can be described as the product of the mass times the velocity of that object. Conservation of momentum is a property of an object as the total amount of momentum stays the same.

According to the law of conservation of momentum, the sum of the momentum before and after the collision of the objects must be equal.

m₁ u₁ + m₂ u₂ = m₁ v₁ + m₂v₂

where u₁ and u₂ are initial speed while v₁ & v₂ is final speed and m₁ and m₂ is the mass of the collided objects.

The first ball, m = 8.52 g and v = 2.13 m/s

The momentum of the first ball = 18.15 g.m/s

The second ball is moving in the opposite direction w.r.t. first ball,

The second ball, m = 8.52 g and v = - 2.13 m/s

The momentum of the first ball = - 18.15 g.m/s

The total momentum  of the system = 18.15 + (-18.15) = 0

Therefore, the total momentum of the given system is zero.

Learn more about the law of conservation of linear momentum, here:

brainly.com/question/17140635

#SPJ6

In physics, the triangle symbol (∆) typically represents a change or difference in a particular quantity.



A triangle is often used to denote the difference between two values of a variable. For example, if we have two values of time, t1 and t2, the change or difference in time can be represented as Δt = t2 - t1, where Δt is the triangle symbol indicating the change in time. Similarly, it can be used to represent differences in other physical quantities such as displacement (∆x), velocity (∆v), or temperature (∆T). The triangle symbol (∆) is a shorthand notation commonly used in physics to indicate changes or differences.

In terms of change in displacement, the triangle symbol (∆) represents the difference between two positions or locations. It indicates the change in the object's position from an initial point to a final point.

For example, if an object initially starts at position x1 and then moves to position x2, the change in displacement (∆x) can be calculated as ∆x = x2 - x1. Here, ∆x represents the difference or change in the object's displacement.

The magnitude of ∆x gives the overall distance traveled by the object, and its sign indicates the direction of the displacement. A positive ∆x signifies a displacement in the positive direction (e.g., to the right or upward), while a negative ∆x represents a displacement in the negative direction (e.g., to the left or downward).

Therefore, The triangle symbol (∆) is commonly used in physics equations to denote changes or differences in various quantities, including displacement, velocity, time, and more. It helps us analyze and quantify the differences between two values of a physical quantity.

To learn more about the triangle symbol click:

https://brainly.com/question/30637056

#SPJ6