Answer:
Typically a personal computer uses a (n) internal disk to store the operating system and software applications.
Explanation:
make a copy of this document to work in, and then respond to each question below the prompt. save and submit this completed file as your challenge deliverable. web application 1: your wish is my command injection provide a screenshot confirming that you successfully completed this exploit: [place screenshot here] write two or three sentences outlining mitigation strategies for this vulnerability: [enter answer here] web application 2: a brute force to be reckoned with provide a screenshot confirming that you successfully completed this exploit: [place screenshot here] write two or three sentences outlining mitigation strategies for this vulnerability: [enter answer here] web application 3: where's the beef? provide a screenshot confirming that you successfully completed this exploit: [place screenshot here] write two or three sentences outlining mitigation strategies for this vulnerability: [enter answer here]
To mitigate this vulnerability, it is important to validate all user input and use parameterized queries when interacting with the database. Additionally, it is recommended to use a limited privilege account for database access and to implement a web application firewall to help prevent these types of attacks.
To mitigate this vulnerability, it is recommended to implement a password policy that requires strong and complex passwords. Additionally, account lockout policies can be put in place to prevent repeated login attempts. It is also important to implement secure password storage practices, such as hashing and salting, to protect against the theft of login credentials.
Web Application 3: Where's the Beef?To mitigate this vulnerability, it is important to implement access controls to restrict access to sensitive data and to validate all user input to prevent unauthorized access. Additionally, it is recommended to use secure communication protocols, such as HTTPS, to protect against data interception and to implement a web application firewall to help prevent these types of attacks.
Learn more about web application:
https://brainly.com/question/28992448
#SPJ11
Which statement best describes the computers found in some newer
appliances?
O A. Many can be used as backups to store documents and other files.
B. Many can be swapped out with computers found in other
appliances.
OC. Many can perform a lot of other unrelated functions if you want
them to.
OD. Many can connect to other devices to communicate and share
information.
Answer:
Option D is correct because many newer appliances that incorporate computer technology, such as smart home devices and IoT devices, are designed to connect to other devices to exchange information and communicate with other systems. This is achieved through the use of various networking technologies, such as Wi-Fi, Bluetooth, and NFC, which enable these appliances to exchange data with other devices.
Option A is incorrect because newer appliances are typically not designed or intended to function as a backup for storing documents and other files. While some appliances may have storage capabilities, their primary purpose is not to provide backup storage.
Option B is incorrect because the computers used in newer appliances are often designed to meet the specific requirements of that appliance, and are not interchangeable with computers found in other appliances. Additionally, these computers are often integrated into the appliance's hardware, making it difficult or impossible to remove or swap out.
Option C is incorrect because while some newer appliances may have additional features or functions beyond their primary purpose, they are not designed to perform unrelated functions in the same way that a general-purpose computer can. These additional features are typically designed to enhance the appliance's primary functionality or improve user experience, rather than provide unrelated functions.
Use the drop-down menus to complete the steps necessary for creating a conditional formatting rule. on the home tab, click the group. on the drop-down list, click , and click new rule. use the dialog box to complete the rule.
Answer: Your welcome!
Explanation:
On the Home tab, click the Conditional Formatting group. On the drop-down list, click New Rule, and click New Rule. Use the dialog box to complete the rule.
Consider the following code segment.
/ missing loop header /
{
for (int k = 0; k < 4; k++)
{
System.out.print(k);
}
System.out.println();
}
The code segment is intended to produce the following output.
0123
0123
0123
Which of the following can be used to replace / missing loop header / so that the code segment works as intended?
for (int j = 0; j < 3; j++)
for (int j = 1; j < 3; j++)
for (int j = 1; j <= 3; j++)
I only
A
II only
B
III only
C
I and II
D
I and III
The code that can be used to replace / the loop header is missing / to make the code segment work as intended, is I and III. The correct answer is D.
To replace the / missing loop header / so that the code segment works as intended, we can use either of the following options:
- for (int j = 0; j < 3; j++)
- for (int j = 1; j <= 3; j++)
Both of these options will result in the loop running 3 times, producing the desired output of "0123" on each iteration. The first option starts at 0 and runs until j is less than 3, while the second option starts at 1 and runs until j is less than or equal to 3.
The option for (int j = 1; j < 3; j++) will not work as intended because it will only run the loop 2 times, resulting in the output "0123" being printed only twice instead of three times.
Learn more about programming:
https://brainly.com/question/26134656
#SPJ11
assume you start off with 4 empty buffer frames, and that, when a page is requested, it is brought in and pinned as normal, and then immediately unpinned before the next page request. hint: see note 5 for a detailed explanation of the clock policy as it may be different from similar policies taught in other courses.
In the scenario described in the question, the buffer pool starts off with 4 empty frames. When a page is requested, it is brought in and pinned as normal, and then immediately unpinned before the next page request.
This means that the clock hand will always be pointing to an unpinned frame when a new page is requested, so the new page will always be brought in to the frame that the clock hand is pointing to, and the clock hand will be moved to the next frame. This will continue until all 4 frames are filled, at which point the clock hand will be pointing back to the first frame and the process will repeat.
The clock policy is a page replacement algorithm that is used to determine which page should be removed from the buffer pool when a new page needs to be brought in. It operates by keeping track of a "clock hand" that points to one of the buffer frames.
When a page is requested, the algorithm checks if the page is already in the buffer pool. If it is, the page is pinned and the clock hand is moved to the next frame. If the page is not in the buffer pool, the algorithm checks the frame that the clock hand is pointing to. If the frame is unpinned, the page in that frame is removed and the new page is brought in. If the frame is pinned, the clock hand is moved to the next frame and the process is repeated until an unpinned frame is found.
Learn more about The clock policy:
https://brainly.com/question/28269175
#SPJ11
Hello
Goodbye
You created the above table but you decided that you don't want the text in the middle
of the cell, instead you would rather it be centered but at the top of the cell. What
setting in Table Properties would allow you to do this?
O Cell vertical alignment
O Cell padding
O Cell phone
Cell horizontal alignment on
Answer:
#Cell Horizontal Alignment
answer all the following with correct answer
Net Profit/Loss is equal to the sum of all items' profits and losses, which is 2000 + 10,000 + 5,000 + 8,000 + 2250 + 10,000 = 37500.
How do profit and loss work?A profit and loss statement is a sort of financial report that shows the revenue and expenses for a specific time period for your firm. The name derives from the fact that it also shows if you were profitable or unsuccessful during that time.
Profit/Loss per unit = Unit Selling Price - Unit Buying Price
Helmets: 300 - 200 = 100
Tyres: 450 - 200 = 250
Pumps: 200 - 100 = 100
Bottles: 250 - 50 = 200
Gloves: 150 - 75 = 75
Shoes: 400 - 150 = 250
Total Profit/Loss = Quantity x Profit/Loss per unit
Helmets: 20 x 100 = 2000
Tyres: 40 x 250 = 10000
Pumps: 50 x 100 = 5000
Bottles: 40 x 200 = 8000
Gloves: 30 x 75 = 2250
Shoes: 40 x 250 = 10000
Net Profit/Loss = Total Profit/Loss for all items = 2000 + 10000 + 5000 + 8000 + 2250 + 10000 = 37500
Therefore, the formula to calculate the values in EZ, IL, and F2 is:
EZ = Quantity x Unit Selling Price
IL = Quantity x Unit Buying Price
F2 = Profit/Loss per unit
And the formula to calculate the total profit/loss is:
Total Profit/Loss = Quantity x Profit/Loss per unit
To know more about profits visit:-
https://brainly.com/question/22703148
#SPJ1
(Will give Brainliest.) Very important. Summarize the entire episode of "Escape from Cluster Prime" from the Nickelodeon TV show: "My Life as a Teenage Robot.". Must be at least 4 sentences or more.
The summary of the entire episode of "Escape from Cluster Prime" from the Nickelodeon TV show: "My Life as a Teenage Robot." is given below.
What is the summary of the above show?In "Escape from Cluster Prime," Jenny, a teenage robot, and her friends Brad and Tuck, are invited to Cluster Prime, a city in space populated by robots. There, they meet Vega, a robotic girl who is also the queen of Cluster Prime.
However, their visit takes a dark turn when they discover that the Cluster robots have enslaved the human inhabitants of a nearby planet. Jenny and her friends team up with Vega to stop the Cluster robots and free the humans.
Along the way, they confront the Cluster King, who has been manipulating Vega and the other robots. In the end, Jenny and her friends are successful in their mission and leave Cluster Prime, having made new allies in the fight for freedom.
Learn more about summary at:
https://brainly.com/question/28052614
#SPJ1
19. Select the WRONG IP address format. O9.24.258.0 124.122.56.12 O123.34.1.0 O254.23.1.1
The correct format is "octet.octet.octet.octet", where each octet is a number between 0 and 255.
09.024.258.000: incorrect
124.122.056.012: correct
123.034.001.000: correct
254.023.001.001: correct
What is IP address?An Internet Protocol address (IP address) is a numerical label that identifies a computer network that employs the Internet Protocol for communication. An example of such an IP address is 192.0.2.1. Identification of the network interface and location addressing are the two primary purposes of an IP address.
A 32-bit number is what the Internet Protocol version 4 (IPv4) defines as an IP address. However, a new version of IP (IPv6), utilizing 128 bits for the IP address, was established in 1998 in response to the expansion of the Internet and the exhaustion of IPv4 addresses. Deployment of IPv6 has been happening since the middle of the 2000s. Each device linked to a network is given an IP address by network administrators. Depending on network procedures and software, such assignments may be made on a static (fixed or permanent) or dynamic basis.
Learn more about IP address here:
https://brainly.com/question/16011753
#SPJ2
evanbot suggests first drawing a stack diagram. remember to include the stack canary in your diagram. according to your stack diagram, which of the following are vulnerable to being overwritten by user input as a result of the gets calls, without causing the program to crash?
According to the stack diagram, the variables that are vulnerable to being overwritten by user input as a result of the gets calls, without causing the program to crash, are the local variables and the saved frame pointer.
This is because the gets function does not check for the size of the input, so it is possible for the user to input a string that is larger than the size of the local variables, causing the input to overwrite the saved frame pointer. However, the stack canary, which is placed between the local variables and the saved frame pointer, can help detect this type of attack and prevent the program from crashing. Therefore, the stack canary is not vulnerable to being overwritten by user input as a result of the gets calls.
Learn more about stack diagram
https://brainly.com/question/29206756
#SPJ11
______ is a machine learning technique that helps in detecting the outliers in data
Outlier Detection is a machine learning technique that helps in detecting the outliers in data. It is used to identify data points that are significantly different from the majority of the data.
Finding and analysing data points that differ considerably from the bulk of the other data points in a dataset is the process of outlier detection. Outliers are data points that are significantly larger or smaller than the other data points in the dataset. They can significantly affect machine learning models and statistical analysis.
It can be used to detect anomalies in financial data, medical data, manufacturing data, or any other type of data.
For such more question on Detection:
https://brainly.com/question/12854520
#SPJ11
what is the main activity done in the third iteration in a spiral process? group of answer choices testing requirements whatever activity addresses the biggest current risk implementation design
The main activity done in the third iteration in a spiral process is implementation design.
A spiral process is a risk-driven process model. It has a unique combination of repetitive and iterative nature of Prototyping and linear, systematic nature of the Waterfall model. The process starts with identifying the objectives of the software, followed by risk assessment, prototyping, and testing in each spiral iteration. Each phase in a spiral process is divided into four quadrants.In the third iteration of a spiral process, the main activity that is done is implementation design. After testing requirements and addressing the biggest current risk in the previous two iterations, in this iteration, the design is implemented. This activity involves the development of software design, hardware, user interfaces, database, procedures, and implementation processes. Implementation design in the third iteration of a spiral process comprises a detailed design of the software and hardware. The implementation design is based on requirements and risk analysis. The spiral model's iterative nature helps in the evolution of the software development process, and it ensures that the software has all the desired features and requirements before the software release. The spiral process involves risk analysis and prototyping, and this helps in determining software development strategies and designing high-quality software. It is a flexible model that allows project managers to respond to changes in requirements or design in the later stages of software development.Learn more about process here: https://brainly.com/question/26409104
#SPJ11
17. Which of the following is the definition of a good digital citizen?
A. A person born after the Internet was invented
B. Someone who uses online tools to bully others
C. A person using the internet for education, work, or socializing
D. An expert on finding information about a person's online activity
C. A person using the internet for education, work, or socializing is the definition of a good digital citizen. This includes using technology responsibly, respecting others online, and being mindful of the impact of one's actions on the online community.
A person using the internet for education, work, or socializing.
Calculate the total time (in milliseconds) required to send a file of size of 8000 bytes. Assume one-way propagation delay of 40 milli second on a link with bandwidth of 0. 8 x106 bytes/second and a packet size of 1000 bytes where data packets can be sent continuously with no packet loss. Please fill in just the value and not any units. For example if the answer is 40 msec, just write 40
The total time required to send a file of size 8000 bytes is 41.25 milliseconds.To calculate the total time required to send a file of size 8000 bytes, we need to consider two types of delays: propagation delay and transmission delay.
The propagation delay is given as 40 milliseconds (ms), and we need to convert the file size from bytes to bits by multiplying it by 8. Therefore, the propagation delay in bits is:
Propagation delay = 40 ms = 40 x 10^-3 s
File size = 8000 bytes = 64000 bits
The transmission delay can be calculated by dividing the packet size (1000 bytes = 8000 bits) by the link bandwidth (0.8 x 10^6 bytes/second = 6.4 x 10^6 bits/second), which gives us:
Transmission delay = packet size / link bandwidth
Transmission delay = 8000 bits / 6.4 x 10^6 bits/second
Transmission delay = 1.25 x 10^-3 seconds
Since we can send data packets continuously with no packet loss, we do not need to consider any other types of delays. Therefore, the total time required to send the file can be calculated as:
Total time = propagation delay + transmission delay
Total time = 40 x 10^-3 s + 1.25 x 10^-3 s
Total time = 41.25 ms
Thus, the total time required to send a file of size 8000 bytes is 41.25 milliseconds.
Find out more about total time
brainly.com/question/14473164
#SPJ4
3)(scan design) suppose that your chip has 100,000 gates and 2,000 flip flops. acombinational atpg program produced 500 vectors to fully test the logic. a single scanchain design will require about 106 clock cycles for testing. (a)find the scan test length including the scan register test if 20 scan chains areimplemented. (b)given that the circuit has 20 primary input and 20 primary output data pins, and onlyone extra pin can be added for test (test control tc) pi, how much more gate overhead willbe needed for the new design? assume the cost of normal data flip flop is 10 gates and the mux is 4 gates. hint: the gate overhead
Answer: a) To find the scan test length including the scan register test if 20 scan chains are implemented, we can use the formula:
Explanation:
Scan Test Length = (Number of Clock Cycles * Number of Scan Chains) + (Number of Vectors * Number of Scan Chains)
Plugging in the given values, we get:
Scan Test Length = (106 * 20) + (500 * 20)
= 2,120 + 10,000
= 12,120 clock cycles
Therefore, the scan test length including the scan register test if 20 scan chains are implemented is 12,120 clock cycles.
(b) To add a test control (TC) pin, we need to add a multiplexer to the design, which selects between the normal data input and the test control input for each flip flop. The gate overhead for the multiplexer is 4 gates per flip flop. Additionally, we need to add a test control input buffer, which introduces an overhead of 10 gates.
So, the total gate overhead for adding the test control pin is:
Gate Overhead = (Number of Flip Flops * 4) + 10
= (2,000 * 4) + 10
= 8,010 gates
Therefore, we need an additional 8,010 gates for the new design with the test control pin.
SPJ11
A penetration tester is tasked with gaining information on one of your internal servers and he enters the following command: telnet server1 80. What is the purpose of this command?
Answer:
As a penetration tester, the purpose of using this command could be to check whether the web server is accessible and whether it is responding to requests on port 80. By establishing a connection to port 80 using telnet, the tester can send HTTP requests and see if the server responds with the expected HTTP headers or content.
Explanation:
This command can be used to gather information about the server, such as the web server software being used, the version of the software, and other configuration details. This information can be useful in identifying vulnerabilities and weaknesses that could be exploited to gain unauthorized access to the server.
I need help I did not mean to do that to my computer
Answer:
Man...I don't think you can fix that yourself..
what is step 2 in the POP technique?
An approach to problem-solving employed in law enforcement is the POP technique, commonly referred to as the Problem-Oriented Policing technique. The method entails a methodical procedure of identification
The pop technique is what?POP Model: Process, Purpose, and Result. Introduction to Purposeful Activity. Our time and energy are limited resources. As leaders, we want to discover how to produce more tangible outcomes with less work (and unintended side effects)
What song was Steps' debut?"5,6,7,8," Steps' first single, was released in 1997 and peaked at number 14 on the UK Singles Chart. It is still one of the most popular singles that never cracked the top 10 in the UK. Their second single, "Last Thing on My Mind," reached number six in the UK and became their first top ten hit.
To know more about technique visit:-
https://brainly.com/question/14491844
#SPJ1
A computer software company receives hundreds of support calls each day. There are several common installation problems, call them A, B, C, and D. Several of these problems result in the same symptom, lock up after initiation. Suppose that the probability of a caller reporting the symptom lock up is 0.80.8 and the probability of a caller having problem A and a lock up is 0.50.5.
Step 1 of 2 :
Given that the caller reports a lock up, what is the probability that the cause is problem A? Round your answer to four decimal places, if necessary.
The probability that the cause is problem A given that the caller reports a lock-up is 0.25, or 25%.
What is the likelihood that the cause is issue A?
We can use Bayes' theorem to solve this problem, which states:
P(A | B) =
P(B | A) * P(A) / P(B)
where:
P(A | B) is the probability of event A given that event B has occurred (in this case, the probability that the cause is problem A given that the caller reports a lock up)
P(B | A) is the probability of event B given that event A has occurred (in this case, the probability that the caller reports a lock up given that the cause is problem A)
P(A) is the prior probability of event A (in this case, the probability that the cause is problem A)
P(B) is the prior probability of event B (in this case, the probability that the caller reports a lock up)
We are given that:
P(B) = 0.8 (the probability that the caller reports a lock up)
P(B | A) = 0.5 (the probability that the caller reports a lock up given that the cause is problem A)
We want to find P(A | B) (the probability that the cause is problem A given that the caller reports a lock up)
We don't have the value of P(A), but we can use the fact that the sum of the probabilities of all possible causes (A, B, C, and D) is 1:
P(A) + P(B) + P(C) + P(D) = 1
We also know that the lock up symptom is present in some of the problems, so we can write:
P(B) = P(B | A) * P(A) + P(B | C) * P(C) + P(B | D) * P(D)
Substituting the values we have, we get:
0.8 = 0.5 * P(A) + P(B | C) * P(C) + P(B | D) * P(D)
We don't have the values of P(C) and P(D), but we know that they are not given in the problem statement, so we can assume that they are not relevant for this calculation and that P(C) + P(D) = 0. This allows us to simplify the equation to:
0.8 = 0.5 * P(A) + 0
which gives us:
P(A) = 0.8 / 0.5 = 0.4
Now we can use Bayes' theorem to calculate the probability that the cause is problem A given that the caller reports a lock up:
P(A | B) = P(B | A) * P(A) / P(B) = 0.5 * 0.4 / 0.8 = 0.25
Therefore, the probability that the cause is problem A given that the caller reports a lock up is 0.25, or 25%.
To learn more about probability, visit: https://brainly.com/question/30624096
#SPJ1
In a word processor, by default, evaluates ______ levels of headings when it builds the table of contents
If you encounter a bug (which is rare) in one of the open source tools, how do you think you could get it fixed?
Answer:
Answers from a former class
Explanation:
Step 1: download the code. Before I could investigate the bug, I needed to be sure I could build the code myself and run the tests. ...
Step 2: run the tests. Once I had the code, I needed to figure out how to run the tests. ...
Step 3: find a failing test. ...
Step 4: fix the bug. ...
Step 5: open a pull request.
My school Chromebook keeps typing "zcvx,m?>" and "?>VX
Answer:
try shutting down your laptop
Which term is a command that is usef to refer to a set of files called a library in your code
Answer: Event handler
Explanation:
Event handler Is a command that is used to refer to a set of files called a library in your code.
Injuries that don't have a logical explanation, such as broken bones in an infant, may be an effect of _____.
A)sexual abuse
B)emotional abuse
C)neglect
D)physical abuse answer
As a general rule, the greater a game's playability, the less fun it is.
True Or False
Answer:
False
Explanation:
Some people like a challenge, because without a challenge it'd be boring.
On a piano, a key has a frequency, say fo. Each higher key (black or white) has a frequency of fo *r", where n is the distance (number of keys) from that key, and r is 2(1/12). Given an initial key frequency (an integer), output that frequency and the next 4 higher key frequencies. Output each floating-point value with two digits after the decimal point, which can be achieved as follows: printf("%0. 21f", yourValue); Ex: If the input is: 440. 0 (which is the A key near the middle of a piano keyboard), the output is: 440. 00 466. 16 493. 88 523. 25 554. 37 Note: Use one statement to computer = 2(1/12) using the pow function (remember to include the math library). Then use that r in subsequent statements that use the formula fn = fo* r with n being 1,2,3, and finally 4
The C++ program reads in an integer 'fo' representing the frequency of the initial key. It then calculates 'r' using the 'pow' function with '2.0' as the base and '1.0/12.0' as the exponent.
Write a Program in C++ for the given problem?
#include <iostream>
#include <math.h>
#include <stdio.h>
using namespace std;
int main() {
int fo;
double r;
cin >> fo;
r = pow(2.0, 1.0/12.0);
printf("%0.2f ", (double)fo);
for(int n = 1; n <= 4; n++) {
double fn = fo * pow(r, n);
printf("%0.2f ", fn);
}
return 0;
}
It prints the initial frequency with 2 decimal places using 'printf', and then uses a loop to calculate and print the next 4 higher frequencies using the formula 'fn = fo * pow(r, n)'. The output is also formatted with 2 decimal places using 'printf'.
To learn more about C++ program, visit: https://brainly.com/question/13441075
#SPJ1
which of the following type of media is most commonly used in backbone networks because of its high capacity? question 5 options: fiber un-shielderd twister pair shielded twisted pair coax cable
Fiber is the type of media most commonly used in backbone networks because of its high capacity.
The part of a computer network that joins together other networks or network segments and provides a path for exchange of data among them is known as the backbone network. The backbone network is a common infrastructure that is used by various networks to connect to one another. A backbone network may be wired or wireless and use various types of media to transport data, but the most common media used in backbone networks is fiber optic cable.Fiber optic cables are a type of networking cable that is made up of thin strands of glass or plastic that can transmit digital data over long distances at high speeds. Fiber optic cables are immune to electrical interference and can transmit data over long distances without signal loss. Fiber optic cables are most commonly used in backbone networks because of their high capacity and low latency, which makes them ideal for use in large networks that need to transmit large amounts of data quickly and reliably.Learn more about Fiber here: https://brainly.com/question/901213
#SPJ11
5. 20 LAB: Step counter A pedometer treats walking 2,000 steps as walking 1 mile. Write a program whose input is the number of steps, and whose output is the miles walked. Output each floating-point value with two digits after the decimal point, which can be achieved as follows: print('{:. 2f}'. Format(your_value)) Ex: If the input is: 5345 the output is: 2. 67 Your program must define and call the following function. The function should return the amount of miles walked. Def steps_to_miles(user_steps)
Answer:
def steps_to_miles(user_steps):
miles = user_steps / 2000.0
return miles
if __name__ == '__main__':
user_steps = int(input())
miles = steps_to_miles(user_steps)
print('{:.2f}'.format(miles))
Explanation:
The steps_to_miles function takes an integer user_steps as input and returns the equivalent number of miles as a float. The computation is straightforward: we divide the number of steps by 2000 to get the number of miles.
In the main program, we first read the user input as an integer using the input() function. We then call the steps_to_miles function with the user input as an argument, and store the result in the miles variable.
Finally, we print the value of miles with two decimal places using the print() function and the '{:.2f}' format specifier. This ensures that the output is in the correct format, with two digits after the decimal point.
las develops this algorithm to compute the calories burned for an activity for a given number of minutes and body weight: if the activity is running, compute caloriespermin by dividing weight by 10.5 if the activity is walking, compute caloriespermin by dividing weight by 15.5 compute numcalories by multiplying caloriespermin by numminutes he implements the algorithm in an app, and users soon ask for the ability to compute the total calories for multiple sessions of walking or running. what structure must be added to the original algorithm so that it can compute the total across multiple sessions?
The structure that must be added to the original algorithm so that it can compute the total across multiple sessions is: iteration structure.
An iteration structure is required to compute the total calories for multiple sessions of walking or running. Therefore, to add an iteration structure to the original algorithm to compute the total across multiple sessions, the following must be done: Declare a variable to hold the total number of calories burned across all sessions. Set the total to 0.Set the number of sessions to the total number of sessions. Add a loop statement that will iterate over the sessions and perform the following:Inside the loop, set the calories for the current session. Set the number of minutes for the current session. Add the calories for the current session to the total.Set the loop to terminate when all the sessions are completed.
Learn more about algorithm: https://brainly.com/question/24953880
#SPJ11
A program is required to compute the cost of a car trip. The required input values are:
Litres per 100km
Distance travelled
Cost per litre of petrol
The output value is the total cost of the trip
To compute the cost of a car trip, we need to gather the required inputs of litres per 100km, distance travelled, and cost per litre of petrol. Once we have these inputs, we can use a formula to calculate the total cost of the trip. The formula is:
Total cost = (litres per 100km x distance travelled / 100) x cost per litre of petrolTo implement this formula in a program, we can prompt the user to enter the required inputs using input statements. We can then use these inputs in the formula to calculate the total cost of the trip, and print the result to the console using a print statement.Here is an example Python program that computes the cost of a car trip:litres_per_100km = float(input("Enter litres per 100km: ")) distance_travelled = float(input("Enter distance travelled: ")) cost_per_litre = float(input("Enter cost per litre of petrol: ")) total_cost = (litres_per_100km * distance_travelled / 100) * cost_per_litre print("Total cost of trip: $", round(total_cost, 2)) This program prompts the user to enter the required inputs as floating point values. It then uses these inputs in the formula to calculate the total cost of the trip, rounding the result to two decimal places. Finally, it prints the total cost to the console in a user-friendly format.
To learn more about inputs click the link below:
brainly.com/question/12985823
#SPJ4