two securities that have different risks and returns?a. standard deviationb. coefficient of variation

It is considerably easier for us to move objects thanks to simple machinery called pulleys that can shift the direction of force. The amount of force necessary to lift something up is reduced by this procedure. Option d

A clear meaning is attached to the word "force." The terms "push" and "pull" are perfectly acceptable at this level to describe forces. An object does not have a force inside of it or within it.

A massed item changes its velocity in response to a push or pull. A body can change its state of rest or motion when an external force acts on it. It is directed and has a magnitude.

To know more about Force visit:

https://brainly.com/question/13191643

#SPJ1

The direction of the acceleration of the pendulum at moment 5 is towards A (center), which is perpendicular to the direction of motion of the bob.  

There is no any component of force acting along the tangent direction, when the bob is at the equilibrium mid-position as the string is completely vertical. Restoring force is momentarily absent in the bob when it is moving through the equilibrium position. The restoring force is only required when the pendulum bob has been slightly displaced away from the equilibrium position.

In the equilibrium position, the tension force is greater than the perpendicular component of gravity when the bob moves through this equilibrium position. As the bob continues its motion along a circular arc, so there must be a net centripetal force towards the center. So the direction will be towards A.

--The given question is incomplete, the complete question is:

"what is the direction of the acceleration of the object at moment 5? enter the letter of the arrow with this direction from the compass rose in the figure. type z if the acceleration vector has zero length."

To know more about pendulum, here

https://brainly.com/question/14759840

#SPJ4

A light ray having 600 nm light will travel faster than 400 nm light.

Other names for "refractive index" are index of refraction and refraction index. The properties of the medium have an impact on the speed of light there. The medium's optical density has an impact on the electromagnetic waves' speed. Optical density is the propensity of the atoms in a substance to recover the captured electromagnetic energy. How quickly light moves through a substance depends on its optical density. One such indicator of a medium's optical density is its refractive index. Refraction is expressed mathematically as follows.

This suggests that the relationship between the velocity and refractive index is inverse. Therefore, light ray at 600 mm with a refractive index of 1.5 will move more quickly than light at 400 mm with a refractive index of 1.6.

Learn more about light ray

brainly.com/question/23281551

#SPJ4

The passenger experiences a 2500 Newton force on average to stop the vehicle.

We may use the formula force = mass x acceleration to get the average force applied on the passenger. The passenger's deceleration in this scenario is the acceleration, which can be computed by dividing the velocity change by the time change.

The passenger's velocity in this instance decreases from 10 m/s to 0 m/s in 0.2 seconds, hence the deceleration is as follows:

deceleration = (change in velocity) / (change in time)

Substitute the value in above equation we get,

deceleration = (0 m/s - 10 m/s) / 0.2 seconds

deceleration = -50 m/s²

Remember that the acceleration is moving in the opposite direction of the velocity when the sign is negative. In this instance, the passenger is originally travelling forward at a positive velocity, but the deceleration is negative, demonstrating that the force is pushing on the passenger from the opposite direction and slowing her down.

Thus, the passenger is subjected to the following force:

mass times acceleration equals force.

Substitute the value in above equation we get,

force = 50 x -50 = 2500 N.

force = 2500 Newton

For such more question on average force

https://brainly.com/question/18652903

#SPJ4

At the height of 3/4h, the speed of the block will be v/2  when it continues to slide up a second smooth ramp. When it is released from rest at the top.

As we know the total energy of the system remains conserved so the kinetic energy that it possesses will be converted to potential energy after juping back.

So 1/2mv^2 = mgh   =>  v^2 = 2gh

and as given velocity remains v/2 So

1/2mv2^2 = 1/8mv1^2

So 1/2 mv2^2 +mgh2 = mgh1   =>   1/8mv1^2 + mgh2  = mgh

1/8m(2gh)+mgh2=mgh

1/4mgh+mgh2=mgh.        ⇒           h2=3/4h.

The speed of the block is v1/2

at a height of 3/4h.

So by the rule of energy changes, and its forms we can conclude that at the height of 3/4h, the velocity of the block will be v/2.

Learn more about the conservation of energy: https://brainly.com/question/166559

#SPJ4

when 270 million people jump at the same time the Earth will move at 1.3 m/s.

The vector quantity of a force. It is a quantity with both magnitude and direction, hence.

We must specify both the size and the direction of the force operating on an object in order to adequately understand it. The average force is the force applied by an item traveling over a specific period of time at a defined rate of speed, or velocity.

This velocity is not instantaneous or precisely calculated, as the word "average" indicates. As a result, the average force is determined by multiplying the body's mass by the object's average velocity during the specified period of time.

Therefore,  when 270 million people jump at the same time the Earth will move at 1.3 m/s.

To learn more about average force, refer to the link:

https://brainly.com/question/29781083

#SPJ1

In other words, the integral of the velocity from t=1 to t=4 is the difference between the object's position at t=4 and its position at t=1.

Velocity is a vector quantity that measures the rate of change in an object’s position. It is the rate of displacement (change in position) with respect to time. Velocity is a combination of speed and direction and is typically denoted as v or u in an equation. It is measured in meters per second (m/s) or kilometers per hour (km/h).

The integral of the velocity of an object from t=1 to t=4 is the change in position (x(t)) of the object from t=1 to t=4. This is represented mathematically as:
Stu(t)dt = x(4) - x(1)
In other words, the integral of the velocity from t=1 to t=4 is the difference between the object's position at t=4 and its position at t=1.

To learn more about velocity
https://brainly.com/question/24445340
#SPJ4

The fraction of its initial kinetic energy lost can be estimated to be 0.10 to 0.20.

Initial kinetic energy is the energy possessed by an object due to its motion. It is the energy of an object before any other external forces, such as gravity, friction, or air resistance, act upon it. Kinetic energy is a scalar quantity, meaning it has magnitude but not direction.

The fraction of kinetic energy lost will depend on the nature of the collision and the amount of energy dissipated. Generally, it is estimated that about 10% to 20% of the initial kinetic energy is lost in a collision. Therefore, the fraction of its initial kinetic energy lost can be estimated to be 0.10 to 0.20.

To learn more about initial kinetic energy
https://brainly.com/question/13026615
#SPJ4

A uniformly charged ring has zero electric field at its center. Radially inwards toward negative point charge and outwards from positive charge is the electric field.

To learn more about electric field refer to:

https://brainly.com/question/14372859

#SPJ4

The frequency of a note two octaves lower than note A (the one right above the center of the piano keyboard) is 110 Hz (the so-called A-440).

The frequency of a repeated event is the number of occurrences per unit of time. It is separate from angular frequency and is sometimes referred to as temporal frequency. The unit of frequency is hertz, which equals one occurrence every second. The number of waves that travel through a particular point in a given length of time is described by frequency. So, if a wave takes half a second to pass, the frequency is 2 per second. The frequency is 100 per hour if it takes 1/100 of an hour. Frequency is a measurement of how frequently a recurrent event, such as a wave, happens in a certain period of time. A cycle is one completion of the repeating pattern.

Here,

The frequency of a note two octaves lower than note A (the one just above the middle of the piano keyboard) has a frequency of 440 Hz (the so-called A-440) is 110 Hz.

To know more about frequency,

https://brainly.com/question/1415786

#SPJ4

The Mega 2560 has a 10-bit A/D converter built-in. This means that analog input voltages can be converted to digital values with a resolution of 10 bits. Typically, a range of 0 to 5 volts is used to map the input voltage range.

With input voltage on the lower axis and output bit on the vertical axis, a graph representing the relationship between the two variables can be created. The A/D converter's quantization levels are represented by the curve. These discrete steps are used to turn the input voltage into a digital value.

The quantization levels within the input voltage range of a 10-bit A/D converter are evenly distributed. The minimum input voltage is equivalent to a digital value of 0, and the maximum input voltage is equivalent to a digital value of 1023. Each quantization level has a corresponding digital value.

To learn more about the input voltage and output bits at

https://brainly.com/question/13185360?referrer=searchResults

#SPJ4

The question is -

The mega 2560 has a built-in 10-bit a/d, typically mapped with the input range of 0-5 volts. sketch a curve similar to the curve below that relates input voltage (bottom axis) to output bits (vertical axis). show quantization levels. So connect your LED and your 220 W resistor to pin 9 and ground. In your code you can get rid of the serial monitor code, and define what pin the LED is connected to int ledPin = 9; under setup add pinMode(ledPin, OUTPUT); Next, define a new integer variable called val and set it equal to the value of the sense in (use analogRead(sensePin)).

No, v is not in span{v1, . . . , vk}, because the center of mass of a system of point masses is a vector that lies outside of the span of any of the individual point masses.

A vector is a mathematical object used in computer programming and other fields. It is a collection of elements, usually numbers or other data points, represented by a single line segment and denoted by an arrow. Vector elements are often used to represent physical quantities such as velocity, acceleration, force, or position. In computer programming, vectors are used to store data in a structured way.

The center of mass is calculated by taking the weighted average of the positions of the individual point masses, thus it is a vector that lies in between the points of the system rather than being one of the points itself.

To learn more about vector
https://brainly.com/question/356987
#SPJ4

Normal stress in CG is 13.58 Ksi

When the deforming force is applied to an item, it deforms. The object will generate an opposing force from within to revert to its previous dimensions and shape. This restoring force will be applied in the opposite direction and have the same magnitude as the deforming force.Stress is a term used to describe how much of this restorative force is produced per unit area of the material. When the path of the deforming force is perpendicular to the body's cross-sectional area, stress is said to be normal stress. If the wire's length or the body's volume changes, the stress level will remain normal.

Using the portion EFCGB as a free body ,

∑[tex]F_{y} =0 :[/tex]

[tex]\frac{3}{5}F_{AE}[/tex]-3600=0

[tex]F_{AE}[/tex]=6000 lb

Using beam EFG as a free body ,

+[tex]M_{F} =[/tex]0 ,

-(4) [tex]\frac{3}{5}F_{AE}[/tex] + (4)[tex]\frac{3}{5}F_{cc}[/tex] = 0

[tex]F_{cc} =F_{AE} =[/tex]6000lb

cross section area of member CG :

[tex]A_{CG}=\frac{\pi}{4} d^{2}[/tex]= [tex]\frac{\pi}{4} (0.75)^{2}[/tex]

[tex]A_{CG}=0.44179 \:in^{2}[/tex]

Let the normal stress is 'B'

Normal stress in CG

[tex]B_{CG} =\frac{ F_{CG} }{ A_{CG} }[/tex] = [tex]\frac{6000 }{0.44179 }[/tex] = 13,580 psi

[tex]B_{CG} =[/tex]  13.58 Ksi

Learn more about normal stress

brainly.com/question/28012990

#SPJ4

The appropriate values into the equation: E = (500 kg) (9.81 m/s2) (change in height between A and C).

An equation is a mathematical statement that expresses the relationship between two or more variables. It is composed of algebraic expressions, including constants, coefficients, variables, and operators, arranged in a particular order.

The energy loss due to friction from A to C can be calculated using the equation E = mgh, where m is the mass of the car (500 kg), g is the acceleration due to gravity (9.81 m/s2), and h is the change in height between points A and C.
Assuming that the track is level between A and C,
then the change in height is zero and the energy loss due to friction is also zero. If, however,
the track is not level and there is a change in height between A and C,
then the energy loss due to friction can be calculated by plugging in the appropriate values into the equation: E = (500 kg) (9.81 m/s2) (change in height between A and C).

To learn more about equation
https://brainly.com/question/26408808
#SPJ4

The answer is that A device compresses the audio file before transmitting it to a second device. The second device restores the compressed file to its original version.

To compresses an  audio file is a term that connote the act of making an audio file to be smaller in size so as to fit into a given device or app. Note that the option that best demonstrates the use of lossless compression of the original file is that A device compresses the audio file before transmitting it to a second device. The second device restores the compressed file to its original version before playing it and as such, option A is correct.

Here,

The solution is that before sending the audio file to a second device, A compresses it. The second device converts the compressed file back to its original state.

Learn more about audio file,

brainly.com/question/2561725

#SPJ4

Of the five oceans, the Atlantic Ocean has the highest salinity. Near the equator and at both poles, salinity clearly decreases.

The amount of dissolved salts in water is known as salinity. This explains not just sodium chloride but all salts (table salt). Because salinity interferes with nitrate uptake, stunts development, and prevents plant reproduction, it has an impact on the production of pastures, trees, and crops. Some ions, most notably chloride, are poisonous to plants, and when their concentration rises, the plant becomes poisoned and perishes.

Due to changes in solar radiation and the physical characteristics of water, the temperature of ocean water fluctuates depending on location, both in terms of latitude and depth. The majority of the lightest water in the Pacific has densities under 26.0, while the majority of the densest water in the Atlantic has densities between 27.5 and 28.0.

A halocline is a layer that separates two water masses by difference in density, albeit it does not occur because of temperature this time. When two bodies of water—one containing freshwater and the other saltwater—converge, it happens.

To know about salinity

https://brainly.com/question/8286469

#SPJ4

The electrostatic force acting on the charge is Fe = 1.5 × 10^-3N The magn

Find the electric force on the upper drop?

To learn more about electric force refers to:

https://brainly.com/question/21980164

#SPJ4

Halving the area of the pipe will double the speed of the water in the pipe. Therefore, option(c) is the correct answer.

Given,

initial flow speed, V₁ = v

let's area, A₁ = A

Now, to double the speed of the water flow

V₂ = 2v

we know that,

using continuity equation of flow:

A₁V₁ = A₂V₂

or A x v = A₂ x 2v

A₂ = A/2 or A₁/2

Therefore, By Halving the area of the pipe will double the speed of the water in the pipe.

To learn more about the continuity equation:

https://brainly.com/question/30267328

#SPJ4

The complete question is:

water flows with speed v through a horizontal, cylindrical pipe. which of the following changes in the geometry of the pipe will double the speed of the water in the pipe?

(a) Doubling the area of the pipe

(b) Doubling the radius of the pipe

(c) Halving the area of the pipe

(d) Halving the radius of the pipe

The type, degree, and duration of force that is employed during the moment was not necessary.

in mechanics, any action that seeks to preserve, modify, or deform a body's motion. Isaac Newton's three laws of motion, which are outlined in his Principia Mathematica, are frequently used to illustrate the concept of force (1687).

Simple people with simple minds teach simple subjects, like physics. The first thing physicists do when they examine an object is to simplify it. A book is a box, not a collection of paper sheets attached with glue and string. A automobile is a box; it doesn't have rotating rubber tires, six-way adjustable seats, lots of cup holders, or a rear window defogger. A human is not formed of bone, muscle, skin, and hair; rather, they are a box with two arms, two legs, and a head. This is the start of a free body diagram, a style of drawing popular among engineers and physicists.

The foundation of physics is the logical process of analysis, which involves dissecting complex circumstances into a collection of smaller ones.

Learn more about force

brainly.com/question/13191643

#SPJ4

This heat is most likely transmitted by Convection only. The first option is the correct answer.

Convection is the transfer of heat by the movement of a fluid or gas. When air moves across a warm body of water, it is heated by the water through convection and rises in the atmosphere. This process is called a sea breeze.

Heat convention in materials can be calculated using the formula:

Q = h A ΔT

Where,

Q = heat transfer rate

h = convection heat-transfer coefficient

A = exposed surface area

ΔT = temperature difference

Learn more about Convection on

https://brainly.com/question/8775667

#SPJ1

The magnitude of the net electric field

The direction of the net electric field from a point to a negative charge is from the point to the charge. The magnitude of the electric field from the point to a point charge

E = kq ÷ r²

E₂ is the electric fields from a point charge to r = 0.15 m

E₂ = 9 × 10⁹ × 8.0 × 10⁻⁹ ÷ 0.15²

E₂ = 72.0 ÷ 0.0225

E₂ = 3,200 N/C

a. At x = - 0.15 m

Look at picture a

b. At x = 0.15 m

Look at picture b

c. At y = 0.15 m

Look at picture c

Learn more about electric field here: https://brainly.com/question/28027633

#SPJ4

The answer is 23.8 N/C.

From symmetry, we see that the net field at

P is twice the field caused by the upper semicircular charge

+q=λ(πR)

The physical field that surrounds electrically charged particles and exerts force on all other charged particles in the field, either attracting or repelling them, is known as an electric field (also known as an E-field[1]). [2] It can also refer to a system of charged particles' physical field. [3] Electric charges and time-varying electric currents are the building blocks of electric fields. The electromagnetic field, one of the four fundamental interactions (also known as forces) of nature, manifests itself in both electric and magnetic fields.

Electrical technology makes use of electric fields, which are significant in many branches of physics. For instance, in atomic physics and chemistry, the electric field acts as an attracting force to hold atoms' atomic nuclei and electrons together. Additionally, it is the force that causes atoms to connect chemically.

Learn more about electric field here: https://brainly.com/question/19878202

#SPJ4

The fourth ellipse, with the length-to-width ratio of approximately 3 to 1, has the greatest eccentricity.

Eccentricity of the ellipse: The eccentricity of an ellipse is a measure of its "oblateness" or how much it deviates from being a circle. An ellipse has an eccentricity between 0 and 1, with 0 representing a circle and values closer to 1 representing more elongated ellipses. So, in this case, the fourth ellipse with the highest length-to-width ratio would have the highest eccentricity value.

The first ellipse is a circle, it means its length-to-width ratio is 1. Second one is more closer to a circle than the third one. Similarly third ellipse is more closer to the circle than the fourth one.

To know more about ellipse, here

https://brainly.com/question/14281133

#SPJ4

Suppose Earth were perfectly spherical. At the equator, the centripetal acceleration, given by the equation a = v^2/r, comes out to 460^2 / 6371000 = 0.033 .

Determine the difference in the weight of a 100.0 kg object between the poles and the equator?

To learn more about poles refers to:

https://brainly.com/question/14997726

#SPJ4

According to Newton's law of cooling, the rate of cooling is inversely related to the temperature differential between the object and its surroundings. For this, the equation is:

dT/dt = k (T - Ts) (T - Ts)

where T is the object's temperature, Ts is the environment's temperature, and k is the cooling constant. where dT/dt is the rate of change in temperature.

This equation can be used to calculate the cooling constant k for the cup of tea. We know that the temperature started off at 95 degrees Celsius, dropped to 75 degrees Celsius, and took 5 minutes to cool down.

95 - 75 = 20, dT/dt = k (20), dT/dt = k (20) *(1/5), and dT/dt = 4k.

Then, we can determine how long it will take for the temperature to cool to the desired level by using this cooling constant and the target temperature (35°C).

35 - 75 = -40\s-40 = 4k(t) (t)

t = -40 / 4k

We are unable to solve for t since we lack the value for k. But if we assume that the cooling rate is comparable to the rate we currently know, we can come up with an estimate. If we assume that the rate of cooling is constant, we can calculate how long it will take for the tea to cool from 75 to 35 degrees by using the rate of cooling from 95 to 75 degrees.

t = -40/20 equals 2 minutes.

It would take around 2 minutes to cool the tea from 75c to 35c under the assumption of similar cooling rate.

To learn more about newton's law of cooling:

https://brainly.com/question/13748261

#SPJ4

Elements are most simply made up of atoms. A pure element will only have one type of atom, for example, a pure chunk of gold will only have gold atoms, making it chemically pure.

Two identical atoms bonded chemically, most frequently by covalent bonds, to form a molecule. Halogens are typically diatomic molecules; for example, chlorine is known as Cl2.

A pure substance is made up of various elements that have been chemically combined. Ionic chemicals that are connected by ionic bonds are the most common way to observe this. Please remember that a compound is not the same as a mixture! Keep in mind that a combination is not linked chemically.

to know more about molecules, compounds and pure substances, see

https://brainly.com/question/475709

https://brainly.com/question/26487468

https://brainly.com/question/18634105

The coffee in the cup would be affected differently. At constant velocity, the coffee remains still, when speeding up it is pushed forward, and when slowing down, it is pushed backward.

When the car is at constant velocity, the coffee in the cup would remain still and not spill. However, when the car is speeding up, the coffee in the cup would be pushed forward, and if the car is slowing down, the coffee would be pushed backward.

This is due to the principle of inertia, which states that an object in motion will remain in motion and an object at rest will remain at rest unless acted upon by an unbalanced force.

As the car accelerates or decelerates, the coffee in the cup will experience the force of the car's motion and be pushed in the opposite direction. The amount of force and the resulting movement of the coffee will depend on the acceleration of the car and the size of the cup.

To learn more about inertia visit: https://brainly.com/question/1140505

#SPJ4

Measurements with precise numbers underlined and estimated numbers highlighted are a) 4.35 m, b) 0.009340 g, c) 3400 km, and d) 1.38 x 103 m/s. An extrapolation using scientific notation is used to create the final figure in d).

A) 4.35 m - Since they can be measured directly or read from a meter, the numbers 4, 3, and 5 are well-known.

B) 0.009340 g - The numbers 0, 0, 9, 3, 4, and 0 are known for sure because they can be measured or read from a scale.

C) 3400 km - The numbers 3, 4, 0, and 0 can be read directly from a measuring device, so they are known for sure.

D) 1.38 x 103 m/s - Numbers 1, 3, and 8 can be measured or read directly from the instrument, so they are known for sure. Since the number "3" is written in scientific notation, it qualifies as an estimate and thus approximates the true value.

To learn more about significant figures at

https://brainly.com/question/16913620?referrer=searchResults

#SPJ4

The question is -

For the following measurements, underline the digits that are known with certainty and highlight in color the digits that are estimated. If a number is ambiguous, that is, the number of significant figures is uncertain, state so. In each case, explain your reasoning. 3) a) 4.35 m b) 0.009340 g c) 3400 km d) 1.38 x 103 m/s

The speed of the waves at the beach in Florida is 2.167 m.s.

The wavelength of a wave is the distance between successive points in a wave.

The wavelength of the given wave is obtained as follows:

Wavelenegh of the wave = 13 meters

The frequency of the wave is 1/6 per second

The wavelength, speed, and frequency of the wave is related as follows;

The velocity of  a wave = wavelength * frequency

The speed or velocity of the wave = 13 * 1/6

The speed or velocity of the wave = 2.176 m/s

Learn more about wavelength and speed of a wave at: https://brainly.com/question/3148541

#SPJ1

The choice is necessarily true of object A is that objects A and C posses charges of of opposite sign.

A force can reason an item with mass to alternate its velocity, i.e., to accelerate. Force also can be defined intuitively as a push or a pull. A pressure has each importance and direction, making it a vector quantity. the word 'pressure' has a specific meaning. At this level, it's miles absolutely suitable to explain a pressure as a push or a pull. A pressure isn't some thing that an item includes or 'has in it'. A pressure is exerted on one item with the aid of using another. The concept of a pressure isn't restricted to dwelling matters or non-dwelling matters. The  objects A and C posses charges of of opposite sign. It is because A attracts B and B repels C so A and C also attract each other.

To learn more about force check the link below:

https://brainly.com/question/12970081

#SPJ4

Complete question:

Three objects are brought close to one another, two at a time. When objects A and B are brought together, they attract. When objects B and Care brought together, they repel. Which of the following are necessarily true? (Select all that apply.) One object is neutral. Objects A and C possess charges of opposite sign. Objects A and C possess charges of the same sign. All three objects possess charges of the same sign. Additional experiments must be performed to determine information about the charges on the objects. Three objects are brought close to each other, two at a time. When objects A and B are brought together, they repel. When objects B and C are brought together, they also repel. Which of the following are true? (Select all that apply.) All three objects possess charges of the same sign. Objects A and C possess charges of opposite sign. One object is neutral. Additional experiments must be performed to determine the signs of the charges. Objects A and C possess charges of the same sign.