Two ropes are attached a wagon one horizontal to the west with a tension force of 75N and other east and at an angle of 38 degrees upward from horizontal with a lension force of 125 N Find the components of the net force on the cart Show your work

Answer:

A, B, and D.

Explanation:

I've answered this exact question on a quiz. Hope it's not too late!

Answer:

A

C

D

Is the right answers not A.B,D.

trust

Answer:

The SI is founded on seven SI base units for seven base quantities assumed to ... The SI derived units for these derived quantities are obtained from these ... mass density, kilogram per cubic meter, kg/m3 ... amount-of-substance concentration, mole per cubic meter, mol/m3 ... solid angle, steradian (a), sr (c), -, m2·m-2 = 1 (b).

Kilogram is a derived SI unit of the following.

Thus, A universal standard for expressing the magnitudes or quantities of significant natural events is the International System of Units.

The acronym SI, which derives from the French term Systèm international  stands for the System of Units, also known as the metric system. The meter-kilogram-second (MKS) system, an earlier unit of measurement, serves as the foundation for the SI standard.

The SI standard is promoted and explained by the Bureau international des poids et mesures (BIPM). The organization was founded in 1875 and is known as the International Bureau of Weights and Measures in English. It is governed by the International Committee for Weights and Measures (CIPM).

Thus, Kilogram is a derived SI unit of the following.

Learn more about Kilogram, refer to the link:
https://brainly.com/question/29761698

#SPJ2

Answer:

1.02 m/s²

Explanation:

The following data were obtained from the question:

Initial velocity (u) = 0 m/s

Final velocity (v) = 6.6 m/s

Time (t) = 6.5 s

Acceleration (a) =.?

Acceleration can simply be defined as the change of velocity with time. Mathematically, it can be expressed as:

a = (v – u) / t

Where:

a is the acceleration.

v is the final velocity.

u is the initial velocity.

t is the time.

With the above formula, we can obtain the acceleration of the car as follow:

Initial velocity (u) = 0 m/s

Final velocity (v) = 6.6 m/s

Time (t) = 6.5 s

Acceleration (a) =.?

a = (v – u) / t

a = (6.6 – 0) / 6.5

a = 6.6 / 6.5

a = 1.02 m/s²

Therefore, the acceleration of the car is 1.02 m/s²

Answer: If you apply force to an object the velocity changes. But it doesn't work the other way around apply velocity and the force (no!)  Velocity does not change on an object.   A force pushes or pulls on an object, but velocity is simply something an object has I hope this makes sense to you. Hope this helps :)

Explanation:

Answer:

The average speed is 50 miles per hour

Explanation:

Speed is equals to distance divided by time

Then substitute your variables into the equation

Hope this helps

please mark as brainliest

Answer:

Sections 3 and 4

Explanation:

The correct answer would be sections 3 and 4.

The velocity of an object is the speed of the object in a particular direction. In this case, the speed of the racer is constant irrespective of the distance or the direction. Hence, the sections of the race during which the racer's velocity would be the same would be the sections in which the racer faces the same direction - which is sections 3 and 4.

Answer: I would say that B would have better weather because those dots on the right are cold fronts and the smooth side without the dots is a warm front. I hope this helps :)

Explanation:

Answer:

A car travels at a constanT

Answer:

ionic

Explanation:

Answer:

The horizontal component of the velocity is 27.19 ft/s

The vertical component of the velocity at takeoff is 12.68 ft/s

The vertical distance traveled by the jumper is 8.2 ft

Explanation:

Given;

angle of projection or takeoff, θ = 25°

the resultant velocity, v = 30 ft/s

The horizontal component of the velocity is given by;

[tex]v_x = vcos \theta\\\\v_x = 30 * cos(25)\\\\v_x = 27.19 \ ft/s[/tex]

The vertical component of the velocity at takeoff is given by;

[tex]v_y = vsin \theta\\\\v_y = 30 * sin(25)\\\\v_y = 12.68 \ ft/s[/tex]

The vertical distance traveled by the jumper is given by;

[tex]v_y_f^2 = v_y_o^2 +2(-g)h\\\\v_y_f^2 = v_y_o^2 -2gh\\\\0 = 12.68^2 - (2*9.8)h\\\\0 = 160.78 - 19.6h\\\\19.6h = 160.78\\\\h = \frac{160.78}{19.6}\\\\ h = 8.2 \ ft[/tex]

Answer:

Kindly check the explanation section.

Explanation:

The statement given in the question or problem above is true or let's say it is correct. And the statement describes different kinds or types of push up.

Push up is a kind of excercise that is being done mainly to strengthen the arm and the cheat. The way one goes about it determines which part of the body one is strengthening.

The kind of push up in which one has to close up the gap between his or hands is known as the close push ups. This kind of push up strengthens the arm more than the other part of the body and the more one puts his or her hands closer the more problematic the push up excercise becomes.

Other types or kinds of push ups are the Slow Eccentric Push Ups, Wide Push Ups, Staggered Push Ups, T push ups, Fingertip Push Ups and many more.

Answer:

1 : an object occupying a central position especially : an adornment in the center of a table. 2 : one that is of central importance or interest in a larger whole the centerpiece of a political agenda.

Explanation:

Answer:

B. The particles in solids have a fixed position but can vibrate

Explanation:

Answer choice "A" is incorrect because particles in gases are not held by bonds and move freely (not fixed).

Answer choice "C" is incorrect because while solids are close in proximity, their particles do not move past each other.

Answer choice "D" is incorrect because while the particles in gases are able to move past each other, they are not arranged in close proximity. In fact, them being spread out and free is why they are able to move past each other.

Answer:

The velocity of an object is the rate of change of its position with respect to a frame of reference, and is a function of time. Velocity is equivalent to a specification of an object's speed and direction of motion (e.g. 60 km/h to the north).

Answer:

normal force and gravitational force are equal. change kg to newtons

98N

Explanation:

The normal force on the box resting on the table is 98 N.

The given parameters;

The normal force on the box resting on the table is the force acting perpendicular to the box and it is calculated as follows;

Fₙ = mg

where;

Fₙ = 10 x 9.8

Fₙ = 98 N

Thus, the normal force on the box resting on the table is 98 N.

Learn more here:https://brainly.com/question/14486416

Answer: X, Z, Y, W.

Explanation: From the formula the velocity is squared which means it can have a significant impact on kinetic energy, thus the higher the velocity the higher the kinetic energy. The kinetic energy is also impacted by the mass of a body, such that the higher the mass the higher the kinetic energy.

Answer:

D

Explanation:took the test

Krill and plankton are two groups of organisms found in the ocean. Krill are species of crustacean related to shrimp, and serve as a very important link in the food chain of the sea. Plankton consist of a larger group of organisms with much more variety, including bacteria, algae, protozoans, jellyfish and some species of cephalopods.

Propulsion

The primary factor that determines whether a species is plankton or not is propulsion. Plankton organisms lack the ability to swim against the tide, and instead float from place to place on sea currents. They may be capable of some movement, and some types of plankton can even hunt for food, but none is powerful enough to make its own headway through the ocean. Adult krill are capable of swimming against currents, but their larvae and eggs fall into the plankton category.

Variation

Krill are crustaceans of the Euphausiacea order, which consists of 86 different species. Plankton, on the other hand, can come from a wide variety of different species and orders. Plankton fall into three broad categories, depending on their primary function. Phytoplankton are plant-like organisms, capable of photosynthesis. Zooplankton are animal plankton species that get their nutrients by eating other microscopic organisms. Bacterioplankton are the smallest plankton, and often serve as food for zooplankton and other lifeforms.

Appearance

Krill species have similar characteristics and generally resemble tiny shrimp. Most species reach around 2 centimeters (0.8 inches) as adults, while the largest species can reach sizes of up to 15 centimeters (5.9 inches). Plankton, on the other hand, consists of organisms of many different shapes and sizes. The smallest categories include microscopic viruses, protozoans, small crustaceans, and other tiny organisms. At the larger end of the scale, megaplankton are any plankton over 2 centimeters (0.8 inches) in size, and include large animals, such as cephalopods and jellyfish. The largest plankton is the lion's mane jellyfish, which can reach 2.5 meters (8.2 feet) in diameter and grow tentacles more than 36.5 meters (120 feet) long.

Role

Plankton and krill serve similar, but slightly different, roles in the food chain. Phytoplankton synthesize nutrients, while bacterioplankton recycle nutrients from decomposing matter in the ocean, providing some of the fundamental sources of nutrition for all ocean creatures. Zooplankton serve to concentrate those nutrients by eating smaller plankton and serving as food for larger creatures. Krill are one step up in the food chain, eating plankton and serving as a nutrient bridge from microscopic life forms to larger fish and mammals.

Answer:

8m/s

Explanation:

speed= distance/time

s= 120/15

= 8m/s

Answer:

0.5

Explanation:

Given parameters:

Weight of object  = 300N

Force of friction = 150N

Unknown:

Coefficient of friction = ?

Solution:

Frictional force is a force that resists the motion of a body.

        It is mathematically expressed as;

                  frictional force  =  uN

Where u is the coefficient of friction

           N = Normal force = weight of the object

Now input the parameters and find u;

             150 = u x 300

                 u = [tex]\frac{150}{300}[/tex]   = 0.5

The coefficient of friction here is 0.5

Answer:

ans: Electromagnetic

Answer:

B on edg.

Explanation:

Answer:

120 miles per hour.

Explanation:

We need to find the time it takes my parents to drive home from the cottage. Since my father drives at 60 miles per hour, and the cottage is 240 miles from our home, and distance = speed × time. So, time = distance/speed = 240 mi/60 mi/h = 4 h.

So, it will take my father 4 hours to drive home from the cottage.

Since I have 2 hours to prepare for the party, the time left for me to drive to the cottage is 4 - 2 hrs = 2 hrs.

So, I'm supposed to drive to the cottage in at most 2 hours.

The speed at which I must drive in this time period is thus,  speed = distance/time = 240 miles/2 hours = 120 miles per hour.

So, I must drive at a minimum speed of 120 miles per hour.

Answer:

9/20

Explanation:

According to this question, Lucy and JoJo need to make 140 cupcakes for the school dance. Lucy made 35 of the cupcakes while JoJo made 42 cupcakes. This means that in total, (42 + 35) cupcakes has been made by both Lucy and JoJo

That is, 77 cupcakes out of 140 has been made. This is 77/140 i.e. 11/20

Since 77/140 cupcakes has been made, Lucy and JoJo still need to make;

140 - 77 = 63 cupcakes to meet up their target for the school dance.

This means that the fraction left is 63/140

63/140 in its lowest term is 9/20

Hence, 9/20 of the cupcakes still need to be made by Lucy and JoJo.

Explanation: 140 - 35 = 105 - 42 = 63

yare yare daze

I use tusk act 4 main

Answer:

If an object is electrically neutral it has no net charge becuase it has the same number of protons as it does electrons, which are opposite charges that offset each other. No, that just means that the sum of all its positive and negative amounts of charge equals zero.

Answer:

Sweat. Hope this helps!!

Explanation:

Answer:

1124923453 electrons

Explanation:

The formula for charge in coulomb ,C =Current in amperes, A * Time in seconds, s

Given in question ;

Charge = 1.6 * 10⁻¹⁹ C

Current = 2.0 nA = 2*e⁻⁹ A

Calculate time in seconds as

1.6 * 10⁻¹⁹ = 2*e⁻⁹ * t

1.6 * 10⁻¹⁹ /2*e⁻⁹  = t

6.48e⁻¹⁶  s = t

So using t=6.48e⁻¹⁶  s and current =2*e⁻⁹ A , the charge will be;

C = 2*e⁻⁹  * 6.48e⁻¹⁶  =1.799e⁻¹⁰ C

But 1 coulomb = 6.25 x 10¹⁸ electrons

so 1.799e⁻¹⁰ C = ?,,,,{ 6.25 x 10¹⁸} *{1.799e⁻¹⁰} =  1124923453.06 electrons

Answer:

B. is the correct answer just took the topic review.

Explanation:

Edge2020. Hope that this helps! Peace and Love

Courts often depend upon recovered memories is the wrong statement about the hypnotic regression.

Hypnotic regression is a contentious method because it can have a number of negative effects on the subjects who undergo it. For the beginners, the memories recovered through any regression can be doubtful and not trust-worthy. All the suggestions or leading questions from the hypnotist or other people of witnesses can affect the memory.

The previous lives memories will be found by the hypnotic technique as a past life regression.  If they used to remember the past life by this method they have high chance of getting into the traumas.

Regression therapy mostly used to identify the cause of your current thoughts and reactions. Therapists who is using this techniques to access subconscious memories that are guiding your current behaviour.

Regression therapy is a method of  treatment that could approach and focuses on resolving particular past events that are thought to be interfering or relatable with a person's current mental and emotional well-being.

Hence, Option B is the correct answer.

Learn more about Hypnotic regression,

https://brainly.com/question/14703250

#SPJ6

Answer:

Mass, m of gas is 0.2504 grams.

Explanation:

First, we need to solve for the volume of the cylindrical tube.

Volume of cylinder is given by the formula;

[tex] V = 2\Pi r^{2}h[/tex]

Where, V represents volume.

π represents pie

r represents radius.

h represents height or length.

Given the following data;

Radius, r = 1.5cm

Length, h = 14.4cm

Density, d = 0.00123g/cm³

Substituting into the equation;

[tex] V = 2 * 3.142 * (1.5)^{2}14.4[/tex]

[tex] V = 2 * 3.142 * 2.25 * 14.4[/tex]

[tex] V = 203. 6016[/tex]

Therefore, the volume of the cylindrical tube is 203. 6016cm³

Density can be defined as mass all over the volume of an object.

Simply stated, density is mass per unit volume of an object.

Mathematically, density is given by the formula;

[tex]Density = \frac{mass}{volume}[/tex]

[tex] Mass = density * volume [/tex]

Substituting into the equation, we have;

[tex] Mass = 0.00123 * 203. 6016 [/tex]

Mass = 0.2504g.

Answer:

b

Explanation:

The factor that is most likely to be responsible for the changes observed in the world's rainforest is human activities.

There has been a surge in the human population leading to an increased need for housing, foods, and other infrastructures. All these needs are directly or indirectly provided by the forest. Hence, the more the population of human expands, the more pressure that would be exerted on the rainforest and, indeed, other forests of the world.

The correct option is b.