Two magnets with opposite poles facing each other are held close to each other but are not touching. When released, the magnets snap together. When this happens, what evidence is there that energy is being transformed?
20 Points! Please have explanation

The current moving through a wire that has 0. 60 C of electrons passing through a point in 1. 5 min is  0.4 Amps (A).

The current is 0.4 Amps (A),

It is calculated using the formula

I = Q/t,

  = 0.60/1.5

  = 0.4 Amps

where Q is the charge (Coulombs) of electrons and t is the time (seconds) taken for them to pass through the point.

The positive sign for current corresponds to the direction a positive charge would move. In metal wires, current is carried by negatively charged electrons, so the positive current arrow points in the opposite direction the electrons move.

In fact, an electric current is defined as the net movement of charge(s). This includes slow drift of electrons inside a wire, or a stream of electrons, protons, or muons traveling near light speed through the vacuum inside a particle accelerator.

For such more questions on current moving :

brainly.com/question/30620189

#SPJ11

The distance an object travels in a unit of time is called the speed of the object. SI. the unit of speed is meter per second (ms−1).

Speed ​​is measured in relation to distance compared to the time it took to cover the distance. Speed ​​is a scalar quantity because it only has  direction and not magnitude.  There are four types of speeds and they are:

Even speed
Variable speed
Average speed
Instantaneous speed
Constant velocity: An object is at a constant velocity when the object travels the same distance in equal intervals of time.
Variable speed: an object is said to have variable speed when the object travels varying distances at regular intervals.
Average speed: Average speed is defined as the constant speed obtained by the ratio of the total distance traveled by the object to the total time spent on the object.  Instantaneous velocity: When an object is moving with a variable velocity, the velocity of that object at any instant of time is called instantaneous velocity.
Speed ​​measurement
A speedometer is used to measure the speed of vehicles. An odometer is used to measure the distance traveled. Speed ​​can also be calculated using a gragraphph. A distance-time graph helps to understand the speed of an object.

To know more about speed go through:-

https://brainly.com/question/13262646

#SPJ4

1. The troposphere is the lowest layer of Earth's atmosphere. Most of the mass (about 75-80%) of the atmosphere is in the troposphere. Most types of clouds are found in the troposphere, and almost all weather occurs within this layer.

2. The stratosphere is very dry air and contains little water vapor. Because of this, few clouds are found in this layer and almost all clouds occur in the lower, more humid troposphere. Polar stratospheric clouds (PSCs) are the exception. PSCs appear in the lower stratosphere near the poles in winter.

3. The mesosphere lies between the thermosphere and the stratosphere. “Meso” means middle, and this is the highest layer of the atmosphere in which the gases are all mixed up rather than being layered by their mass. The mesosphere is 22 miles (35 kilometers) thick.

4. The thermosphere is a layer of Earth's atmosphere that is directly above the mesosphere and below the exosphere. It extends from about 90 km (56 miles) to between 500 and 1,000 km (311 to 621 miles) above our planet.

5. The ozone layer acts as a natural filter, absorbing most of the sun's burning ultraviolet ( UV ) rays. Stratospheric ozone depletion leads to an increase in UV -B that reach the earth's surface, where it can disrupt biological processes and damage a number of materials

Explanation: Hope This Helps!

The distance between the boat and the camera is 0.0525 m. The boat must move closer by a distance of  35 mm to fill the width of the film.

you have a camera with a 35.0-mm-focal-length lens and 36.0-mm-wide film. you wish to take a picture of a 12.0-m-long sailboat but find that the image of the boat fills only the width of the film.

(a) Given data:

The focal length of the lens, f = 35.0 mm

Width of the film, w = 36.0 mm

Length of the sailboat, L = 12.0 m

Length of the image of the sailboat on film = Width of the film

Let the distance between the boat and the camera be x.

The object distance, u = ?

Image distance, v = f

Let M be the magnification of the image, then we have:

 M = v/u

Width of the image, W' = w

Since the image of the boat fills only half of the width of the film,

W' = w/2.

Now, using the relation,

1/f = 1/u + 1/v

Putting f = 35mm, v = 35mm, and solving for u, we get

u = 52.5 mm = 0.0525 m

Therefore, the distance between the boat and the camera is 0.0525 m.

(b)Width of the image, W = w = 36 mm

Width of the sailboat, L = 12 m

Let the new distance between the boat and the camera be y.

The new image distance, v' = f

We know that the magnification of the image is given by M = v'/u'.

And the width of the image of the boat is given by:

W = (M)(L)

Using the relation,

1/f = 1/u' + 1/v', we can find the object distance, u'.

Substituting the given values, we get

u' = 0.0175 m = 17.5 mm

Therefore, the boat must move closer by a distance of (52.5 - 17.5) mm = 35 mm to fill the width of the film.

To know more about Distance:https://brainly.com/question/26550516

#SPJ11

At a pace of 8 km/hr, it would take the roller skater 3.125 hours to complete 25 km.

To determine how long it would take a roller skater to travel 25 km if their speed is 8 km/hr, we can use the formula:

time = distance / speed

In this case, the distance is 25 km and the speed is 8 km/hr. Substituting these values into the formula, we get:

time = 25 km / 8 km/hr

Simplifying, we get:

time = 3.125 hours

Therefore, it would take the roller skater 3.125 hours to travel 25 km at a speed of 8 km/hr. It's important to note that this is assuming a constant speed throughout the journey, and not taking into account any breaks or rest stops the skater may need to take.

To learn more about  speed refer to:

brainly.com/question/17661499

#SPJ4

Answer:

B. herbivore.

Explanation:

Meadow voles primarily consume plants, such as grasses, herbs, and bark, although they may also eat insects occasionally. As a result, their niche in an ecosystem is that of a herbivore, which is an organism that consumes primarily plants.

Answer:

50m/s.

Explanation:

Answer:

[tex]V_f=50m/s[/tex]

Explanation:

Use the the formula for final velocity (kinematic equation):

[tex]V_f=V_i+at[/tex]

Final velocity = Initial velocity + acceleration times time

Given values:

Rest - indicates 0 initial velocity

Acceleration - 10 m/s^2

Time - 5 seconds

Insert the given values:

[tex]V_f=0+5\times10[/tex]

[tex]V_f=50m/s[/tex]

The fourth option best represents the proper graph, which resembles a branch of a hyperbola.

From Coulomb's Law.

F = k · (q₁ · q₂) / r²

where

Q1 and Q2 are the charges of the two particles, F is the electrostatic force separating them, k is the Coulomb's constant, and r is the separation between them.

The force becomes weaker as the two particles move apart.

Moreover, as r approaches zero, F approaches 1 / 0 =. F is endlessly powerful when there's no separation between the two particles. As a result, the force axis will never be touched by the force about distance graph.

Learn more about Coulomb's law:https://brainly.com/question/506926

#SPJ1

The voltage dropped across R₃ is 52.68 volts.

To determine the voltage dropped across R₃, we can use the voltage divider formula:

V₃ = ( R₃ / ( R₁ + R₂ + R₃ + R₄ ) ) x ET

Substituting the given values, it can be calculated as:

V₃ = (36 Ω / ( 15 Ω + 18 Ω + 36 Ω + 13 Ω ) ) x 120 V

V₃ = ( 36 Ω / 82 Ω ) x 120 V

V₃ = 52.68 V

Therefore, the voltage dropped across R₃ is approximately 52.68 volts.

Find out more on voltage here: https://brainly.com/question/27861305

#SPJ1

Answer:

MCB (Miniature Circuit Breaker) is generally considered better than fuses for several reasons:

Cost-effective: MCBs are more cost-effective in the long run compared to fuses as they can be reset and reused after tripping, whereas fuses need to be replaced each time they blow.

Convenience: MCBs can be reset with the flip of a switch, while fuses need to be manually replaced, which can be a hassle.

Accuracy: MCBs are more accurate in protecting against overloading and short circuits. They can be set to trip at specific amperages, providing better protection against damage to electrical appliances and wiring.

Safety: MCBs are safer than fuses as they do not produce arc flashes during tripping, which can cause electrical fires or explosions.

Overall, MCBs are a more efficient and safer alternative to fuses for protecting electrical circuits.

Explanation:

The following are the answers to the following questions:

There will not be a Doppler shift.

There will still be a Doppler shift observed by the radar gun.

Doppler shift is the change in frequency of a wave caused by relative motion between the source and the observer. This shift in frequency can be used to calculate the relative motion of the source and observer and is employed in a variety of applications such as radar, astronomy, and medical imaging.

1: The guns are adjusted for forward or backward motion towards or away from the gun. What happens if an automobile moves perpendicular to the gun's line of sight?

The radar gun will not detect any Doppler shift.

2: If the car is approaching or departing from a different angle, there is .

A Doppler change will still be detected, but it will be less than the maximum Doppler shift that would occur if the car moved directly towards or away from the gun.

3: As a result, if the radar gun indicates that a car is driving at a specific speed, the car is moving at the speed radar report.

To know more about Doppler effect visit :-

https://brainly.com/question/15318474

#SPJ9

The time taken by Super Mario  is 2.91 seconds to reach the mystery block.

To find the time it takes for Super Mario to reach the mystery block, we can use the kinematic equation:

∆y = v0t + (1/2)at2

Where ∆y is the change in a vertical position, v0 is the initial vertical velocity, a is the acceleration due to gravity, and t is the time.

Since the mystery block is 8.2 m above Mario's head, ∆y = 8.2 m. The initial vertical velocity, v0, is 0 m/s since Mario is starting from rest. The acceleration due to gravity in the Mushroom Kingdom, gmk, is 1/5th of that on Earth, so

a = (1/5)g = (1/5)(9.8 m/s2)

a = 1.96 m/s2.

Plugging these values into the equation, we get:

8.2 m = (0 m/s)t + (1/2)(1.96 m/s2)t2

Simplifying and rearranging, we get:

t2 = (8.2 m)/(0.98 m/s2)

Taking the square root of both sides, we get:

t = √((8.2 m)/(0.98 m/s2)) = 2.91 s

To learn more about Time :

https://brainly.com/question/2364404

#SPJ11

.

The pilot should leave the shore at an angle of 14.04° in order to go directly to the child.

To find the angle, we can use the Pythagorean Theorem and trigonometry.

First, we need to find the distance between the child and the boat dock. Using the Pythagorean Theorem, we get:

d = √((200 m)^2 + (1500 m)^2) = 1520.69 m

Next, we need to find the time it will take for the child to reach the boat dock. Since the child is being carried by the current at a speed of 2.0 m/s, we can use the formula:

t = d/v = 1520.69 m / 2.0 m/s = 760.34 s

Now, we need to find the distance the boat will travel in this time. Since the boat has a speed of 8.0 m/s with respect to the water, we can use the formula:

d = v*t = 8.0 m/s * 760.34 s = 6082.72 m

Finally, we can use trigonometry to find the angle at which the pilot should leave the shore. Using the formula:

tan(θ) = opposite/adjacent = 200 m / 6082.72 m = 0.0329

θ = tan^-1(0.0329) = 14.04°

Therefore, the pilot should leave the shore at an angle of 14.04° in order to go directly to the child.

To know more about angles, refer here:

https://brainly.com/question/29016274#

#SPJ11

The magnitude of the total displacement of Olivia's trip is 1.9 miles. The direction of the total displacement of her trip is southeast.

To find the magnitude of the total displacement, we need to use the Pythagorean theorem:
a^2 + b^2 = c^2

In this case, a = 0.9 miles (the distance she travels south), and b = 0.8 + 1.4 = 2.2 miles (the distance she travels east).

Plugging in these values, we get:
0.9^2 + 2.2^2 = c^2
0.81 + 4.84 = c^2
5.65 = c^2
c = √5.65
c = 2.376

So the magnitude of the total displacement is approximately 2.376 miles.

To find the direction of the total displacement, we need to use the tangent function:
tan θ = opposite/adjacent

In this case, opposite = 2.2 miles (the distance she travels east), and adjacent = 0.9 miles (the distance she travels south).

Plugging in these values, we get:

tan θ = 2.2/0.9
θ = tan^-1(2.2/0.9)
θ = 67.38 degrees

So the direction of the total displacement is approximately 67.38 degrees from south, or southeast.

To know more about displacement, refer here:

https://brainly.com/question/30087445#

#SPJ11

To calculate time, divide the distance by speed.  hence, the time is 7.5 minutes.

Divide the distance by the speed to find the passing duration. Multiply the speed by the duration to get the distance. These formulae can be represented more simply as s=d/t, where s stands for speed, d for distance, and t for time.
Given: speed= 50 mph.
distance= 10km
1 mile = 1.6 km
1km = 1/1.6 miles= 0.625 milesmiles
We know that, time= distance/speedspeed
Time = 0.625*10/50= 0.125 hours.
1 hour = 60 minutes

hence, 0.125 hours= 60*0.125 = 7.5 minutes.

To know more about speed go through:-

https://brainly.com/question/13262646

#SPJ4

The color of an object has to do with the light wavelength. A white t-shirt looks yellow because it absorbs all the colors while black white all the wavelengths of light. A ripe mango is yellow because reflect all the reflects wavelengths.

The light wavelength has an impact on an object's color of which the object reflects. Because it absorbs all hues, a white t-shirt seems yellow, but a black one emits all light wavelengths. A ripe mango appears yellow because, when white light strikes it, its atomic impurities bounce all the wavelengths of light at our sight more than the other colors. ​

To know more about reflection and absorption of light, visit,

https://brainly.com/question/30935871

https://brainly.com/question/14871680

#SPJ4

Answer:

uhhh

Explanation:

Gino should tell his partner that she should have only done four quarter turns and should have finished the dance after 32 counts. This would have resulted in her facing only two walls at the end.

Quarter is a term used to describe the amount of rotation an object has undergone when it does a full turn. A quarter-turn is the equivalent of 90 degrees. Quarter are commonly used to measure the rotation of a wheel, a lever, a bolt, or any other object that can be rotated. It is also used in architecture to describe the amount of rotation of a staircase or other structure. In engineering, quarter-turns are used to measure the amount of torque that is being applied to a mechanism or device. Quarter are also used to measure the amount of rotation when adjusting the settings of a device.

To learn more about quarter

https://brainly.com/question/30628942

#SPJ1

The magnitude of the induced emf if magnetic field is reduced to zero in 0.12 seconds is 14.058 V.

The emf induced in a circular loop of wire is given by Faraday's law of electromagnetic induction:

emf = - N * (dΦ/dt)

where N is the number of turns in the loop,

Φ is the magnetic flux through the loop, and

(dΦ/dt) is the rate of change of magnetic flux through the loop.

The circular loop has a radius of 15 cm and consists of 53 turns of wire.

The magnetic field passing through the loop is perpendicular to its plane and has a magnitude of 0.45 T. The magnetic field is reduced to zero in 0.12 s.

The magnetic flux through the circular loop is given by:

Φ = B * A

where B is the magnetic field, and

A is the area of the circular loop.

Since the magnetic field is perpendicular to the plane of the loop, the area A is given by:

A = π * r²

where r is the radius of the circular loop.

Substituting the given values, we get:

A = π * (0.15 m)²= 0.0707 m²

Φ = B * A = (0.45 T) * (0.0707 m²) = 0.0319 Wb.

The rate of change of magnetic flux through the loop is given by:

(dΦ/dt) = -ΔΦ/Δt

where ΔΦ is the change in magnetic flux and

Δt is the time taken for the change.

Substituting the given values, we get:

(dΦ/dt) = -Φ/Δt = -(0.0319 Wb) / (0.12 s) = -0.266 Wb/s

Finally, substituting the values of N and (dΦ/dt) in Faraday's law, we get:

emf = - N * (dΦ/dt) = -(53) * (-0.266 V) = 14.058 V

Therefore, the magnitude of the induced emf in the circular loop is 14.058 V.

To practice more questions about magnetic field:

https://brainly.com/question/10736183

#SPJ11

The correct answer for a) the rocket was 19,671.65 meters (or 19.67 km) from the ground when the boosters turned off, b) rocket's upward acceleration while its boosters were firing was 11.7 m/s^2, c) the boosters were firing for 58.04 seconds, d)  the rocket is in the air for a total of 199.38 seconds

a) To find the distance from the ground when the boosters turned off, we can use the formula for displacement in terms of initial velocity, acceleration, and time:
d = v_i*t + 0.5*a*t^2

We know the initial velocity (v_i) is 0 m/s, the acceleration (a) is 11.7 m/s^2, and the final velocity (v_f) is 679 m/s.

We can use the formula v_f = v_i + a*t to find the time (t) that the boosters were firing:

679 m/s = 0 m/s + 11.7 m/s^2 * t

t = 58.04 s

Now we can plug this time into the displacement formula:

d = 0 m/s * 58.04 s + 0.5 * 11.7 m/s^2 * (58.04 s)^2

d = 19,671.65 m

So the rocket was 19,671.65 meters (or 19.67 km) from the ground when the boosters turned off.

b) The prototype rocket's upward acceleration while its boosters were firing was 11.7 m/s^2, as given in the question.

c) As calculated in part a), the boosters were firing for 58.04 seconds.

d) To find the total time the rocket is in the air, we need to find the time it takes to reach its maximum height and the time it takes to fall back to the ground.

We can use the formula d = v_i*t + 0.5*a*t^2 again, with the initial velocity (v_i) being 679 m/s, the acceleration (a) being -9.8 m/s^2 (due to gravity), and the displacement (d) being the difference between the maximum height and the height when the boosters turned off:

42.3 km - 19.67 km = 22.63 km = 22,630 m

22,630 m = 679 m/s * t + 0.5 * -9.8 m/s^2 * t^2

Solving this quadratic equation gives us two solutions for t, but only one is positive:

t = 70.67 s

So the time it takes to reach the maximum height is 70.67 seconds.

The time it takes to fall back to the ground is the same, since the initial and final velocities are the same but in opposite directions. Therefore, the total time the rocket is in the air is:

t_total = 58.04 s + 70.67 s + 70.67 s = 199.38 s

So the rocket is in the air for a total of 199.38 seconds before striking the ground.

To know more about acceleration, refer here:

https://brainly.com/question/28164989#

#SPJ11

The speed of the wave remains unchanged.

The speed of a wave is determined by the product of its wavelength and frequency. This can be represented by the formula: speed = wavelength x frequency

If the frequency of a wave is doubled while the wavelength remains the same, then the product of the wavelength and frequency will remain constant. This means that the speed of the wave will also remain constant.

To understand this, let's consider an example:

Suppose the original frequency of a wave is f, and its wavelength is λ. Then, the speed of the wave is given by:

speed = λ x f

Now, if the frequency is doubled, the new frequency becomes 2f. The wavelength remains the same at λ. So, the new speed of the wave can be calculated as: new speed = λ x 2f = 2(λ x f) = 2 x speed

As we can see, the new speed is twice the original speed, which contradicts our assumption that the speed remains constant. Therefore, the speed of the wave remains unchanged when the frequency is doubled while the wavelength remains the same.

To know more about speed of the wave, refer here:

https://brainly.com/question/10715783#

#SPJ11

(a) To find the truck's velocity relative to you, we need to subtract your velocity from the truck's velocity.

Since you are driving north and the truck is approaching you in the other lane, the velocities are in opposite directions. Therefore, we can simply subtract the two speeds: Truck's velocity relative to you = Truck's velocity - Your velocity = 104 km/h - 88 km/h = 16 km/h north (since the truck is approaching you). Therefore, the truck's velocity relative to you is 16 km/h north. (b) To find your velocity relative to the truck, we need to subtract the truck's velocity from your velocity. Since you are driving north and the truck is approaching you from the opposite direction, the velocities are again in opposite directions. Therefore, we can simply subtract the two speeds: Your velocity relative to the truck = Your velocity - Truck's velocity = 88 km/h - 104 km/h = -16 km/h north (since you are moving away from the truck). Therefore, your velocity relative to the truck is 16 km/h south. (c) After you and the truck pass each other, the relative velocities change. The truck is now moving away from you, and you are moving away from the truck. Therefore, the velocity of the truck relative to you will decrease, while your velocity relative to the truck will increase. However, the magnitude of the relative velocities will remain the same, since the difference between the two velocities is still 16 km/h. The direction of the relative velocities will also change, with the truck's velocity relative to you now being 16 km/h south, and your velocity relative to the truck now being 16 km/h north.

To learn more about Velocity click the link below

brainly.com/question/29519833

#SPJ4

The mass of the bullet is approximately 0.21 kg (to 2 significant figures).

We can use the principle of conservation of momentum to solve this problem. The total amount of momentum prior to and following the impact are equal.

Let the mass of the bullet be "m" kg.

The momentum of the bullet before the collision is:

p1 = m × 50 m/s = 50m

The momentum of the bullet and block after the collision is:

p2 = (m + 0.5 kg) × 15 m/s = 15(m + 0.5)

According to the principle of conservation of momentum:

p1 = p2

50m = 15(m + 0.5)

50m = 15m + 7.5

35m = 7.5

m = 7.5/35 = 0.2143 kg (rounded to 2 significant figures)

Therefore, the mass of the bullet is approximately 0.21 kg (to 2 significant figures).

for such more question on mass

https://brainly.com/question/19385703

#SPJ4

The forces acting on a skateboard include gravity, friction, air resistance, and applied force, and they all affect the motion of the skateboard in different ways.

When a skateboard is in motion, several forces act on it that affect its movement. The main forces acting on a skateboard are:

Gravity: This is a force that pulls the skateboard downwards towards the ground. The weight of the skateboard and the rider are also affected by gravity.

Friction: This is a force that opposes the motion of the skateboard. Friction is caused by the skateboard's wheels rolling on the ground or surface, and it can slow down the skateboard's speed.

Air resistance: This is a force that opposes the motion of the skateboard as it moves through the air. The faster the skateboard moves, the more air resistance it experiences.

Applied force: This is the force applied by the rider to propel the skateboard forward or to perform tricks. The amount of applied force determines how fast or slow the skateboard moves.

The combination of these forces affects the motion of the skateboard. If the applied force is greater than the forces of friction, air resistance, and gravity, the skateboard will accelerate. If the forces of friction, air resistance, and gravity are greater than the applied force, the skateboard will slow down or come to a stop.

Learn more about force here

brainly.com/question/19584436

#SPJ4

The electrostatic force each charge exerts on the other is  2.81N  .[tex]q_{1} =[/tex] [tex]3[/tex] × [tex]10^{-6} C[/tex][tex]\\q_2}[/tex]  [tex]= - 1.5[/tex] × [tex]10^{-6} C[/tex]   They are separated by a distance [tex]r = 0.12m[/tex]

Electrostatic force is [tex]F =[/tex] [tex]\frac{kq_{1} q_{2} }{r^{2} }[/tex]

[tex]F = 2.81N[/tex]

The term "scalar" refers to a category of quantities that may be fully defined by a single magnitude. Quantities called vectors can be fully represented by their direction as well as their magnitude.

How do you define a vector's magnitude?

A vector's length is considered to be its magnitude. The letter "a" stands for the dynamic array magnitude. For further information about a vector's magnitude, go to its introduction. This article deduces formulas for vectors magnitude in considerations of their coordinates in three and two dimensions, respectively.

Magnitude is simply "distance or amount," according to the definition given in physics. It illustrates the either the absolute or relative size or velocity direction for an item.

To know more about Force  click here

brainly.com/question/29044739

#SPJ4

Answer:

KE = 1/2 M V^2

V = (2 KE / M)^1/2 = (2 * 40 / .1)^1/2 = 28.3 m/s

(I) The focal length of the lens is 180.0 cm.

(II) The distance for which the image would be the same size as the object is 90.0 cm.

We can use the lens equation and the magnification formula to solve for the focal length of the lens and the distance for which the image would be the same size as the object.

The lens equation is:

1/f = 1/do + 1/di

where;

We are given that the distance between the image and the object is 90.0 cm and the magnification is 2. The magnification formula is:

m = - di/do

where;

Substituting these values into the magnification formula, we get:

2 = - di/do

di = -2do

Substituting these values into the lens equation, we get:

1/f = 1/do - 1/2do

Simplifying this equation, we get:

1/f = 1/2do

f = 2do

Substituting the given value of di, we get:

f = 2(-90.0 cm) = -180.0 cm

Since the focal length must be positive for a converging lens, we take the absolute value and get:

f = 180.0 cm

(ii) Distance for which the image would be the same size as the object:

When the image is the same size as the object, the magnification is 1. We can use the magnification formula to solve for the distance di:

m = - di/do

1 = - di/do

di = -do

Substituting the given value of do, we get:

di = -90.0 cm

Learn more about converging lens here: https://brainly.com/question/15123066

#SPJ1

When two rope segments pull up on the load in the single movable pulley, the optimal mechanical advantage is 2. This sort of pulley does not change the direction of the applied force, but it does increase it by a factor of two.

There are two methods for calculating a pulley system's mechanical advantage.

The mechanical advantage may be calculated simply by counting the number of falls (or active lifting ropes) that are really attached to the load. You may also split the effort distance by the load distance.

Assuming an ideal rope and pulley system with a mechanical advantage of  [tex]2.00[/tex] , the output load that can be lifted with an input force of [tex]200 N[/tex] can be calculated using the formula:

Output force = Input force x Mechanical advantage

Where the mechanical advantage is given as [tex]2.00[/tex]  .

Thus, the output force is:

Output force [tex]= 200 N \times 2.00 = 400 N[/tex]

Therefore, with an input force of [tex]200 N[/tex]  , the rope and pulley system can lift an output load of up to [tex]400 N[/tex] .

Learn more about ideal here:

https://brainly.com/question/6968974

#SPJ1