Answer:
interference is between destructive and constructive
Explanation:
The interference of two sound waves periodicity in phase by the speakers is
Δr = [tex]\frac{\phi }{2\pi } \ \lambda[/tex]
in this case they indicate that the frequency is f = 700 Hz, the wave speed is
v =λ f
λ = v / f
λ = 341/700
λ = 0.487 m
Let's use the Pythagorean theorem to find the distance that each wave travels
r₁ = [tex]\sqrt{x^2 + y^2}[/tex]
let's measure the distance from speaker 1
r₁ = [tex]\sqrt{5^2 + 1^2}[/tex]
r₁ = 5,099 m
the distance from the second speaker
r₂ = \sqrt{x^2 + y^2}
r₂ = [tex]\sqrt{5^2 +3^2}[/tex]
r₂= 5.831 m
the difference in the way is
Δr = r₂ -r₁
Δr = 5,831 - 5,099
Δr = 0.732 m
[tex]\frac{ \phi }{2\pi }[/tex] = Δr /λ
\frac{ \phi }{2\pi } = 0.732 / 0.487
\frac{ \phi }{2\pi } = 1.50
this is the phase difference this phase difference is approximately
Ф= [tex]\frac{\pi }{2}[/tex] =1.57,
so the interference is between destructive ( Ф = π) and constructive (Ф=2π)
using the image provided, which moon phase is next?
Answer:
Waning Crescent
Answer: waxing crescent
Explanation:
A parallel beam of light of wavelength 4.5 x 10^-7 m is incident on a pair of slits that are 5.0 x 10^-4 m apart. The interference pattern is focused on a screen 2.0 m from the slits. The separation between two adjacent bright fringes is most nearly:_________
Answer:
1.8x10⁻³m
Explanation:
From the question above, the following information was used to solve the problem.
wavelength λ = 4.5x10⁻⁷m
Length L = 2.0 meters
distance d = 5 x 10₋⁴m
ΔY = λL/d
= 4.5x10⁻⁷m (2) / 5 x 10₋⁴m
= 0.00000045 / 0.0005
= 0.0000009/0.0005
= 0.0018
= 1.8x10⁻³m
from the solution above The separation between two adjacent bright fringes is most nearly 1.8x10⁻³m
thank you!
In a double-slit experiment, the third-order maximum for light of wavelength 510 nm is located 17 mm from the central bright spot on a screen 1.6 m from the slits. Light of wavelength 670 nm is then projected through the same slits. Part A How far from the central bright spot will the second-order maximum of this light be located
Answer:
14.9 mm
Explanation:
We know dsinθ = mλ where d = separating of slit, m = order of maximum = 3 and λ = wavelength = 510nm = 510 × 10⁻⁹ m
Also tanθ = L/D where L = distance of m order fringe from central bright spot = 17 mm = 0.017 m and D = distance of screen from slit = 1.6 m
So, sinθ = mλ/d
Since θ is small, sinθ ≅ tanθ
So,
mλ/d = L/D
d = mλD/L
Substituting the values of the variables into the equation, we have
d = 3 × 510 × 10⁻⁹ m × 1.6 m/0.017 m
d = 2448 × 10⁻⁹ m²/0.017 m
d = 144000 × 10⁻⁹ m
d = 1.44 × 10⁻⁴ m
d = 0.144 × 10⁻³ m
d = 0.144 mm
Now, for the second-order maximum, m' of the 670 nm wavelength of light,
m'λ'/d = L'/D where m' = order of maximum = 2, λ' = wavelength of light = 670 nm = 670 × 10⁻⁹ m, d = slit separation = 0.144 mm = 0.144 × 10⁻³ m, L' = distance of second order maximum from central bright spot and D = distance of screen from slit = 1.6m
So, L' = m'λ'D/d
So, substituting the values of the variables into the equation, we have
L' = 2 × 670 × 10⁻⁹ m × 1.6 m/0.144 × 10⁻³ m
L' = 2144 × 10⁻⁹ m²/0.144 × 10⁻³ m
L' = 14888.89 × 10⁻⁶ m
L' = 0.01488 m
L' ≅ 0.0149 m
L' = 14.9 mm
a spring has a spring constant of 330 n/m. how far is the spring compressed when 150 newtons of force are used?
a. 0.0014 meters
b. 0.45 meters
c. 2.2 meters
d. 5.0 meters
show your work
Answer:
I think its B
Explanation:
Which of the following statements about asexual reproduction is NOT true? A Only one parent sex cell is needed. B The offspring are copies of the parent. C Most single-celled organisms reproduce this way. Dit results in more variation in species than does sexual reproduction
Answer:
D
Explanation:
D is false because asexual reproduction produces offspring much more similar to the parent than that produced in sexual reproduction.
If two connected points objects pass through the same set of three points, the shapes created by each will be identical, regardless of the order in which each object was plotted. True False
Answer:
True
Explanation:
It Depends on the order in which each object was plotted, if two connected points objects pass through the same set of three points, the shapes created by each point may be different
A graduated cylinder with which of the following gradations would lead to the most precise measurements of volume?
O marked every 10 ml
O marked every mL
O marked every 5 ml
A current of 5 a flows in a copper wire for 20 s. how many coulombs of charge passed through the wire in this time?
Answer:
I think so too
Explanation:
:*
An electrical appliance draws 9.0 amperes of current when connected to a 120-volt
source of potential difference. What is the total amount of power dissipated by this
appliance?
1100 W
110 W
13 W
130 W
Answer:
The correct answer is "1080 W".
Explanation:
Given:
Current,
I = 9.0 A
Potential difference,
V = 120 volt
As we know,
⇒ [tex]Power=IV[/tex]
On substituting the values, we get
⇒ [tex]=120\times 9.0[/tex]
⇒ [tex]=1080 \ W[/tex]
state Newton's first law of motion in words
Answer:
An unmoving object will remain unmoving and a moving object in motion will continue to be in motion with the same velocity unless an external force acts upon it.
Solve the following problem. A force of 5N is being applied to the right, and a force of
3N is being applied to the left. What is the net force?
A- 15 N
B- 8 N
C- 7N
D- 2N
Answer:
D 2N
Explanation:
these are opposite forces so one becomes negative and the other positive that is
-3+5=2 or 5-3=2
what are 5 examples of energy transformations?
Answer:
Fuel cells (Chemical energy → Electrical energy) Battery (electricity) (Chemical energy → Electrical energy) Fire (Chemical energy → Heat and Light)
Explanation:
A 1 kg flashlight is dropped from rest and falls to the floor without air resistance . At the point during its fall, when it is 0.7 meters above the floor, its potential energy exactly equals its kinetic energy. How fast is the flashlight moving at this point, in m/s 3.7
Answer:
The speed of the flashlight at that point is 3.7 m/s
Explanation:
When an object of mass M is at a height H above the ground, the potential energy of the object is:
U = M*H*g
Where g is the gravitational acceleration, g = 9.8 m/s^2
And for an object with velocity v, the kinetic energy is:
K = (M/2)*v^2
We know that when the flashlight of mass 1kg is 0.7 meters above the ground, the potential energy is equal to the kinetic energy, then:
M = 1kg
H = 0.7m
g = 9.8 m/s^2
Replacing these in the equations, we get:
U = K
(1kg)*(0.7m)*(9.8 m/s^2) = ((1kg)/2)*v^2
As the mass factor appears in both sides, we can remove it:
(0.7 m)*(9.8 m/s^2) = (v^2)/2
Now we can multiply both sides by 2:
2*(0.7 m)*(9.8 m/s^2) = v^2
Now let's apply the square root to both sides:
√(2*(0.7 m)*(9.8 m/s^2)) = v = 3.7 m/s
A Piatma is a very hot gas comprised of freely moving positive and negative suale particles that are in random motion. Which of the following microscopic properties, together alwama held to have an observable macroscopic effect on the plasma when the plan is placed in the region that contains the magnetic field?
A. The particles have subatomically mal dimensions
B. The particles are charged
C. The particles are not all classified as fundamental particles
D. The particles are in random motion
Answer:
B. The particles are charged
Explanation:
We know that a moving charge particle in magnetic field experiences a magnetic force given by :
[tex]$\vec F = q (\vec v \times \vec B)$[/tex]
In the context, a very hot gas of piatma consists of freely moving positive particles as well as negative particles. Now when the plasma is placed in the region of a magnetic field, then it experiences a force and thus it shows that the particles are charged particles.
Hence , option (B) is correct.
Select the correct answer. A body travels 10 meters during the first 5 seconds of its travel, and it travels a total of 30 meters over the first 10 seconds of its travel. What is its average speed during the time from t = 5 seconds to t = 10 seconds? A. 2 meters/second B. 3 meters/second C. 4 meters/second D. 5 meters/second E. 6 meters/second
Answer:
2 m/s
Explanation:
...........................
Answer:
A:2 m/s
Explanation:
Plato
The power output of a car engine running at 2500 rpm is 500 kW . You may want to review (Pages 574 - 577) . Part A How much work is done per cycle if the engine's thermal efficiency is 20.0 %
Answer:
Explanation:
2500 rpm = 2500 / 60 rps ( revolution per second )
= 41.67 rps .
power output = 500 kW
thermal efficiency = 20 %
power input = (100 /20) x 500 kW
= 2500 kW .
work done per second = 2500 kJ
work done per cycle = 2500 / 41.67
= 60 kJ .
We have that the workdone per cycle is mathematically given as
Wc=12.00KJ
Workdone per cycle of engineQuestion Parameters:
The power output of a car engine running at 2500 rpm is 500 kW
Generally the work done per cycle is mathematically given as
Wc=500*1/41.666
Where
=2500rev/60sec
=41.666
Meaning one cycle takes 1/41.666
Hence
Wc=500*1/41.666
Wc=12.00KJ
For more information on work
https://brainly.com/question/756198
A young woman with normal distant vision has a 10.0% ability to accommodate (that is, increase) the lens strength (a.k.a, lens power) of her eyes. What is the closest object she can see clearly
Answer:
20.0 cm
Explanation:
Here is the complete question
The normal power for distant vision is 50.0 D. A young woman with normal distant vision has a 10.0% ability to accommodate (that is, increase) the power of her eyes. What is the closest object she can see clearly?
Solution
Now, the power of a lens, P = 1/f = 1/u + 1/v where f = focal length of lens, u = object distance from eye lens and v = image distance from eye lens.
Given that we require a 10 % increase in the power of the lens to accommodate the image she sees clearly, the new power P' = 50.0 D + 10/100 × 50 = 50.0 D + 5 D = 55.0 D.
Also, since the object is seen clearly, the distance from the eye lens to the retina equals the distance between the image and the eye lens. So, v = 2.00 cm = 0.02 m
Now, P' = 1/u + 1/v
1/u = P'- 1/v
1/u = 55.0 D - 1/0.02 m
1/u = 55.0 m⁻¹ - 1/0.02 m
1/u = 55.0 m⁻¹ - 50.0 m⁻¹
1/u = 5.0 m⁻¹
u = 1/5.0 m⁻¹
u = 0.2 m
u = 20 cm
So, at 55.0 dioptres, the closet object she can see is 20 cm from her eye.
If u shine a light of frequency 375Hz on a double slit setup, and u measure the slit separation to be 950nm and the screen distance to be 4030 nm away what is the distance from the zero order fringe to the first order fringe
Answer:
Y = 3.39 x 10⁶ m
Explanation:
We will use Young's Double Slit formula here:
[tex]Y = \frac{\lambda L}{d}[/tex]
where,
Y = Fringe spacing = ?
λ = wavelength = [tex]\frac{speed\ of\ light}{frequency} = \frac{3\ x\ 10^8\ m/s}{375\ Hz}[/tex] = 8 x 10⁵ m
L = screend distance = 4030 nm = 4.03 x 10⁻⁶ m
d = slit separation = 950 nm = 9.5 x 10⁻⁷ m
Therefore,
[tex]Y = \frac{(8\ x\ 10^5\ m)(4.03\ x\ 10^{-6}\ m)}{9.5\ x\ 10^{-7}\ m}[/tex]
Y = 3.39 x 10⁶ m
g hoop rolls without slipping on a horizontal surface. The hoop has a mass m and radius r. What is the ratio of the hoop's translational kinetic energy to the hoop's rotational kinetic energy, KT /KR
Answer:
[tex]\frac{K.E_t}{K.E_r} = 1[/tex]
Explanation:
The translational kinetic energy of the hoop is given as:
[tex]K.E_t = \frac{1}{2} mv^2[/tex] ---------------------- equation (1)
where,
[tex]K.E_t[/tex] = translational kinetic energy
m = mass of hoop
v = linear speed of hoop
The rotational kinetic energy of the hoop is given as:
[tex]K.E_r = \frac{1}{2} I\omega^2[/tex]
where,
[tex]K.E_r[/tex] = rotational kinetic energy of the hoop
I = Moment of Inertia of the hoop = mr²
r = radius of the hoop
ω = angular speed of hoop = [tex]\frac{v}{r}[/tex]
Therefore,
[tex]K.E_r = \frac{1}{2} (mr^2)(\frac{v}{r} )^2\\\\K.E_r = \frac{1}{2} mv^2[/tex]------------------- equation (2)
dividing equation (1) and equation (2), we get:
[tex]\frac{K.E_t}{K.E_r} = \frac{\frac{1}{2}mv^2 }{\frac{1}{2}mv^2 }\\\\\frac{K.E_t}{K.E_r} = 1[/tex]
En una carga de prueba de 2 microcoulomb se sitúa en un punto en el que la intensidad del campo eléctrico es de 5 * 10 / 2 N/C cuál es la fuerza de la magnitud que actúa sobre ella?
Answer:
Fuerza, F = 0.001 Newton
Explanation:
Dados los siguientes datos;
Intensidad del campo eléctrico = 5 * 10² N/C
Carga = 2 microculombios = 2 * 10^{-6} culombios
Para encontrar la fuerza que actúa sobre la carga;
Matemáticamente, la intensidad del campo eléctrico viene dada por la fórmula;
Intensidad del campo eléctrico = fuerza/carga
F = E * Q
F = 5 * 10² * 2 * 10^{-6}
Fuerza, F = 0.001 Newton
what is the value of 3 in
24.635
Answer:
3 tens
Explanation:
The value
of 3 in 24.635 is at 3 tens place as the place is two to the left.
The correct answer to the given is question is "0.03".
What is Place Value?The value of each digit in a number is known as place value.For example the 2 in 125 represent 2 tens or 20, however the 2 in 2103 represent 2 thousands or 2000.Frequently, they will only include the letters like Millions, Hundred Thousands, Ten Thousands, Thousands, Hundreds, Tens, Ones, tenths, hundredths, and so on to denote each place. How to solve this question?Let's display the number 24.635 using a place value chart.
Tens -> 2 Ones -> 4 Tenth -> 6 Hundredths -> 3 Thousandths -> 5
The 3 is in Hundredths Place or the value of 3 in 24.635 is 0.03.
Thus, we can conclude that the value of 3 in 24.635 is 0.03 after solving the question.
Learn more about Place Value here:
https://brainly.com/question/569339
#SPJ2
to increase the frequency by 2 octave (s), to 4 f , by what factor would you have to increase the tension
Answer:
16
Explanation:
Since frequency in a stretched string f = (n/2L)√T/μ and n, L and μ are constant, f ∝ √T where T = tension in string
Now f₂/f₁ = √T₂/√T₁
Since f₁ = f (frequency at tension T₁) and f₂ = 4f (since its frequency increases by 2 octaves to 4f at tension T₂).
So,
f₂/f₁ = √T₂/√T₁
4f/f = √T₂/√T₁
√T₂/√T₁ = 4
squaring both sides, we have
(√T₂/√T₁)² = 4²
T₂/T₁ = 16
T₂ = 16T₁
So, the tension would have to increase by a factor of 16
PLEASE HELP I WILL MARK BRAINLYIST!!!!!!!!!
All of the matter in the universe formed after the big bang. Scientists
predicted that hydrogen and helium would be the most abundant elements.
What did scientists discover?
A. The universe has 73% hydrogen and 25% helium, which does not
support the big bang theory
B. Planets are made mostly of other elements, which does not
support the big bang theory
C. Stars are made mostly of other elements, which supports the big
bang theory
D. The universe has 74% hydrogen and 24% helium, which supports
the big bang theory.
Answer:
The answer is D. Here is proof . Plz mark brainliest
Explanation:
please help, im having trouble can you please explain how to do it
Answer:
independent and the second one with the (-8, 1, -3)
2. A force of magnitude 44 N compresses a spring 0.69 m from equilibrium. What is the value of the spring constant?
60 N/m
64 N/m
32 N/m
49 N/m
Answer:
Spring constant = 63.77 N/m
Explanation:
Given the following data;
Force = 44 N
Extension = 0.69 m
To find the spring constant;
Force = spring constant * extension
Substituting into the formula, we have;
44 = spring constant * 0.69
Spring constant = 44/0.69
Spring constant = 63.77 N/m
In a series RLC ac circuit, a second resistor is connected in series with the resistor previously in the circuit. As a result of this change, what happens to the impedance of the circuit
Answer:
* The first thing we observe is that the frequency response does not change
* The current that circulates in the circuit decreases due to the new resistance at the resonance point,
Z = R + R₂
Explanation:
The impedance of a series circuit is
Z₀² = R² + (X_L-X_C) ²
when we place another resistor in series the initial resistance impedance changes to
Z² = (R + R₂) ² + (X_L - X_C) ²
let's analyze this expression
* The first thing we observe is that the frequency response does not change
* The current that circulates in the circuit decreases due to the new resistance at the resonance point,
Z = R + R₂
Which of the following phase changes occurs at point B on the phase diagram shown below? (choose all that apply)
solid
liquid
gas
T
melting
sublimating
boiling
condensing
Answer:
Condensation and Melting
Explanation:
Gas to liquid = Condensation
Solid to liquid = Melting
During an auto accident, the vehicle's air bags deploy and slow down the passengers more gently than if they had hit the windshield or steering wheel. According to safety standards, the bags produce a maximum acceleration of 60g, but lasting for only 32 ms (or less). How far does a person travel in coming to a complete stop in 32 ms at a constant acceleration of 60g
Answer:
s = 0.3 m
Explanation:
In order to calculate the distance traveled by the person, we will use the second equation of motion:
[tex]s = v_it + \frac{1}{2}at^2[/tex]
where,
s = distance traveled = ?
vi = initial speed = 0 m/s
t = time = 32 ms = 0.032 s
a = acceleration = 60g = (60)(9.81 m/s²) = 588.6 m/s²
Therefore,
[tex]s = (0\ m/s)(0.032\ s)+\frac{1}{2}(588.6\ m/s^2)(0.032\ s)^2[/tex]
s = 0.3 m
A boy stands between two vertical walls and fires a rifle. Under what condition will he hear a single echo from both walls? Calculate the distance between the walls if the single echo is heard six seconds later.
Answer:
d = 1,029 m
Explanation:
When the young man shoots the rifle the sound travels in all directions, if the young man is at the same distance from the two walls, as the speed of the wave is constant, he takes the same time to go to the wall and return for which he hears a single echo.
To calculate the distance let's use the uniform motion relationships
v = d / t
d = v t
As the speed is constant, the time to reach the wall is the same as it takes to go from the wall to the young man,
t = to / 2
t = 6/2
t = 3 s
d = 343 3
d = 1,029 m
Will give brainliest
Answer:
D
Explanation:
Think about like charges meaning the charge is the same.
Which only D has two charges and are the same, positive will repel against positive charge so select D.