two differences in properties between sugar and sugar solution

88 degrees the final temperature if delta Hcombustion is -37 kJ/G and the specific heat of water is 4. 18 J/gK

delta H= Cs* delta T

delat T= delta h / cs(specific heat)

delta T= -37/4.18

delta T = 88 degrees

A calorimeter is used to calculate combustion heats. The specific heat capacity of a substance is defined as the amount of energy needed to raise one gramme of that substance's temperature by one degree Celsius. A material will store heat energy more effectively if its specific heat capacity is higher. When one mole of a substance burns, the quantity of energy produced as heat (q) is measured as the heat of combustion (H°c) (combustion). When a reaction generates heat, it is an exothermic process that releases energy.

Learn more about temperature here:

https://brainly.com/question/11464844

#SPJ4

Answer:

In simple synthesis reactions involving reaction of elements, such as aluminum metal reacting with chlorine gas, the product will be a simple compound containing both elements. In this case, it is easiest to consider the common charges that the elements adopt as ions and build your product accordingly.

Explanation:

In a compound, covalent bond type of bond is the sharing of electrons between adjacent atoms.

A covalent bond is a type of chemical bond formed by the sharing of one or more pairs of electrons between two atoms and compound. In a covalent bond, the shared electrons are located in the region between the nuclei of the two atoms, and the bond results in a lower energy state for the atoms involved. Covalent bonds are formed between atoms that have similar electronegativities, meaning they have a similar attraction for electrons. They are typically formed between non-metal atoms such as carbon, hydrogen, oxygen, and nitrogen. Covalent bonds can be single, double or triple depending on the number of electrons shared between the atoms.

To know more about compound please refer: https://brainly.com/question/13516179

#SPJ4

The system will throw a comparison error if a programmer attempts to compare two different datatypes in the C++ language, is the answer. An address in memory is what a pointer is, although an integer is a separate datatype.

Integral, Floating Point, Character, Character String, and Composite types are the five fundamental categories of data types recognised by the majority of current computer languages. Within each of these broad categories, numerous particular subtypes are established. Integral, Floating Point, Character, Character String, and Composite types are the five fundamental categories of data types recognised by the majority of current computer languages. Within each of these broad categories, numerous particular subtypes are established. Unquoted upper-case terms, such as String, are used to represent data types. Data types can occasionally accept parameters, which makes them more specialised. As an illustration, the data type for strings with at least eight characters is String[8].

Learn more about datatypes here:

https://brainly.com/question/13383828

#SPJ4

To form the 2+ ion the iron atom loses the 4s2 electrons. When forming the 3+ ion the iron atom loses the 4s2 electrons and one 3d electron.

An ion is described as an atom or molecule with a net electrical charge. The charge of an electron is considered to be negative by convention and this charge is equal and opposite to the charge of a proton, which is considered to be positive by convention.

During the formation of ionic bonds  positive ion is attracted to a negative ion and lattice energy is released.

Learn more about ionic bonds at: https://brainly.com/question/977324

#SPJ1

205–316: Rational Number V64: Irrational Number Rational Number 5 (4V5 - 355): Irrational Number 573 - V3: Irrational Number 2V3: Irrational Number 77-V147: Irrational Number.

V42: Irrational Number 168 Please be aware that irrational numbers are denoted by the symbol "V," which stands for "square root of," the equations are simplified, and the outcomes are not precise values; rather, they are categorized as rational or irrational based on their mathematical characteristics.A real number that cannot be represented as a repeating or terminating decimal, as well as a ratio of integers (i.e., as a fraction), is said to be irrational. In other words, a number that is irrational cannot be expressed as a finite fraction or a finite decimal.The ratio of a circle's circumference to its diameter, or pi, is the most well-known example of an irrational number. Due to its inability to be represented, it is an irrational number.

learn more about  Irrational Number  here:

https://brainly.com/question/29194459

#SPJ4

The different antacids used will be the independent variable.

Antacids are medications that alleviate heartburn and indigestion by decreasing the amount of acid in stomach. They are bases that are used to neutralize acidity (caused by acids) - which occurs when your stomach releases too much of HCl acid in the stomach. They do this neutralization of stomach acid by inhibiting an enzyme that produces acid in order to break down food for digestion (pepsin). High level of acid production in stomach can lead to acidity which may result in production of gases (resulting in bloating and discomfort) and gastric ulcers. Regarding how phenol red acts as a pH indicator, over the pH range of 6.6 to 8.0, its color gradually transitions from yellow to red. When the pH rises above 8.1, phenol red turns a bright pink (fuchsia) color. This color change is caused by phenol red losing protons (and changing color) as the pH rises. But addition of HCl would start imparting the nature of acids to the solution, so the color change would go from red to yellow.

To know more about acids :

https://brainly.com/question/25148363

#SPJ4

S (reaction) = 2.70 + 1.205 - 2,109.6 ,S ° (reaction) = 125.8 J / mol K

Entropy (S, abbreviated as entropy) in thermodynamics represented the degree of system disorder.

Entropy, like other thermodynamic concepts, can only be determined from the beginning and ending states.

Then energy is converted into different forms, entropy will also change.

Standard entropy data allow for the calculation of S °'s value.

The formula is S ° (reaction) = S ° (product) - S ° (reagent)

The standard thermodynamic quantities for chemical substances at 25 °C for entropy can be found in the CRC Handbook of Chemistry and Physics data table, 84th Edition (2004) as follows: (Supporting evidence can be found in other data.)

NH3 (g) = 192.8 J/mol K.

O2 (g) = 205 J per mole of K

Water (g) = 188.8 J/mol K

H2O (mol) = 70 J/mol K

NO2 (g)=240.1 J/mol K

H₂O₂ (l) = 109.6

S (reaction) = 2.70 + 1.205 - 2,109.6

S ° (reaction) = 125.8 J / mol K.

To learn more about reaction refer to:

https://brainly.com/question/11231920

#SPJ1

The volatile is defined as the speed or rate at which a substance evaporates when exposed to the air.

The Volatility is indicated by the  substance's vapor pressure. It is the tendency of the substance to the speed at which it vaporizes or evaporates. The Substances with the higher vapor pressure will be vaporize more easily at the given temperature than compared to the substances with the lower the vapor pressure.

Thus, the speed or rate at which a substance evaporates when exposed to the air is termed as the volatility. It is tendency of the substances to get vaporize.

To learn more about volatility here

https://brainly.com/question/4373812

#SPJ4

Answer:

(1)  methanol is also known as methyl alcohol.

    CH3-OH

    term "meth" means one that's why only one carbon atom are there.

(2)   Ethanoic acid has the functional group of carboxylic acid which is           (-COOH).

The term "eth" means two that's why two carbon atoms are there.

CH3-CH2-COOH

(3)   Ethanol is an alcohol that has a functional group of alcohol that is (-OH)

       The term "eth" means two that's why two carbon atoms are there.

         CH3-CH2-OH

(4) Butanoic acid is a carboxylic acid that has a functional group of             (-COOH)

The term "But" means four that's why four atoms of carbon are there.

       CH3-CH2-CH2-COOH

The question must be Write the formula of

1. Methanol

2. ethanoic acid

3 ethanol

4. butanoic acid

Read more about it;

https://brainly.com/question/21245990

Explanation:

Al2(SO4)3 : Ca(OH)2

1 mol. : 3 mol (from equation)

2 mol : 6 mol

The majority of the lead(II) iodide in the solution precipitates out as a yellow solid flag.

Define lead iodide?

To learn more about iodide refers to:

https://brainly.com/question/16004932

#SPJ4

A first order process' rate constant, k, can be computed using the formula: k = 0.693/half-life.

A equation is a scientific statement indicating that two sums or values are equal, such as 6 x 4 = 12 x 2. When two or more components must be taken into account collectively in order to comprehend or describe the overall situation, this is known as an equation.

The meaning of an equation in algebra is a scientific statement that demonstrates the equality of two mathematical expressions. For instance, the equation 3x + 5 = 14 consists of the two equations 3x + 5 and 14, which are separated by the 'equal' sign.

To know more about formula visit:

https://brainly.com/question/30313275

#SPJ4

Ice sheets, ice caps, glaciers, icebergs, bogs, ponds, lakes, rivers, streams, and groundwater are the sources of freshwater.

Go through the given link below to know more about freshwater:-

https://brainly.com/question/898979

#SPJ4

The amount that will be left after 115.2 years, given that you started with 10 grams sample of strontium-90 is 0.625 g

To obtain the amount that will be left after 115.2 years, we shall begin our calculation by obtaining the number of half lives that has passed.

The number of half lives that has passed can be obtained as followed:

n = t / t½

n = 115.2 / 28.8

n = 4

Thus, 4 half lives has passed.

Finally, we shall determine the amount that will be left after 115.2 years. This is illustrated below:

N = N₀ / 2ⁿ

N = 10 / 2⁴

N = 10 / 16

N = 0.625 g

Thus, we can conclude that the amount that will be left after 115.2 years is 0.625 g

Learn more about amount remaining:

https://brainly.com/question/28440920

#SPJ1

True -   the part of the still where the steam is changed back into water is called the condenser.

Device known as a condenser that turns a gas or vapour into a liquid Condensers are used in refrigeration plants to condense refrigerant vapours such ammonia and fluorinated hydrocarbons as well as in power plants to condense turbine exhaust steam.

The condenser's job is to take the high-pressure gas coming from the compressor and turn it into a liquid. By using the idea that heat will always travel from a warmer to a cooler substance, it accomplishes this.

Simply put, a condenser is a cooling system. Condensers, often referred to as heat rejectors, are used in every refrigeration system and power plant to condense refrigerant vapours or steam. Shell and tube condenser and air cooled condenser are the two main types utilised nowadays.

For such more questions on  Condenser :

brainly.com/question/1447093

#SPJ4

If the partial pressure of the diatomic gas is 0. 780 bar, then the total pressure of the system is 3.64 bar

Given data :-

Number of particles of diatomic gas = 3

Number of particles of monatomic gas = 6

Number of particles of another monoatomic gas = 5

Total number of particles (or) moles in the gas mixture = 3 + 6 + 5 = 14 particles (or) moles

We know that,

Mole fraction = Number of moles of given gas / Total number of moles

Therefore,

Mole fraction of diatomic gas = Number of moles of diatomic gas / Total number of moles of mixture

=> [tex]\frac{3}{14}[/tex]

=> 0.214

Given partial pressure of diatomic gas = 0.780 bar

Raoult's law states that a gas's partial pressure in a mixture (or system) is equal to its mole fraction times the mixture's overall pressure.

Partial pressure of gas = Mole fraction × Total pressure

So,

Total pressure of system = Partial pressure of diatomic gas / Mole fraction of diatomic gas

[tex]P_{Total} = \frac{0.780}{0.214}[/tex]

=> [tex]P_{Total} = 3.64[/tex] bar.

To know more about Raoult's law

brainly.com/question/28304759

#SPJ4

Between methoxybenzene and toluene, toluene has greater separation because toluene has an attached methyl group, whereas benzene does not .

A hydrogen molecule is referred to as ortho hydrogen if both of its nuclei spin in the same direction. When both hydrogen nuclei are spinning in opposite directions, the molecule is referred to as para hydrogen. Ordinary dihydrogen is created when ortho and para hydrogen are in equilibrium.

Ortho substitution has two substituents in the ring's 1 and 2 locations, whereas para substitution has two substituents in the 1 and 4 positions. This is the main distinction between ortho para and meta substitution. Meta replacement, on the other hand, has two substitutes in positions 1 and 3.

To know more about para hydrogens visit :

https://brainly.com/question/10718240

#SPJ4

This lack of genetic variation can lead to a decrease in the population’s ability to survive and adapt to changing environments, resulting in a population that is more at risk of extinction.

To learn more about The reproductive strategy refer to:

https://brainly.com/question/10413000

#SPJ1

27% of phosphate groups bind to only one amino acid, but there is a wide distribution, with 3% of phosphates binding to seven residues.

what is  amino acids?

To learn more about amino acid refers to;

https://brainly.com/question/25923721

#SPJ4

if the grass will be replanted and transported pet store mice to dwell on the hill.No, their solution does not meet all of their needs.

One reason is that, even if the grass is replanted, it may still wash away in future heavy rains if the underlying soil erosion problem is not addressed. The students should consider ways to stabilize the soil and prevent erosion, such as building terraces or planting vegetation that can hold the soil in place. Additionally, bringing pet store mice may not be a good solution since mice are not native to that area and could cause problems for the local ecosystem.

Learn more about ecosystem here:

https://brainly.com/question/13979184

#SPJ4

The molar mass of Ferric Oxide (Fe2O3) is calculated as follows:

Fe: (2 atoms) x (56 g/mol) = 112 g/mol

O: (3 atoms) x (16 g/mol) = 48 g/mol

Fe2O3 = 112 g/mol + 48 g/mol = 160 g/mol

The molar mass of Lactic acid (C3H6O3) is calculated as follows:

C: (3 atoms) x (12.01 g/mol) = 36.03 g/mol

H: (6 atoms) x (1.01 g/mol) = 6.06 g/mol

O: (3 atoms) x (16 g/mol) = 48 g/mol

C3H6O3 = 36.03 g/mol + 6.06 g/mol + 48 g/mol = 90.09 g/mol

The molar mass of water (H2O) is calculated as follows:

H: (2 atoms) x (1.01 g/mol) = 2.02 g/mol

O: (1 atom) x (16 g/mol) = 16 g/mol

H2O = 2.02 g/mol + 16 g/mol = 18.02 g/mol

The molar mass of ascorbic acid (C6H8O6) is calculated as follows:

C: (6 atoms) x (12.01 g/mol) = 72.06 g/mol

H: (8 atoms) x (1.01 g/mol) = 8.08 g/mol

O: (6 atoms) x (16 g/mol) = 96 g/mol

C6H8O6 = 72.06 g/mol + 8.08 g/mol + 96 g/mol = 176.14 g/mol

Mendel contemplated two other theories for how two characteristics might diverge during gamete formation:

1. According to the blending theory, when two people with distinct qualities unite, the resultant offspring will combine both traits in an equal amount. For instance, the offspring of a red-flowered plant and a white-flowered plant will produce pink flowers.

2. According to this idea, genes are small, discrete units (particles) that when two people with different traits mate, their kids will either inherit one or the other trait. For instance, the child of a red-flowered plant and a white-flowered plant will have either red or white flowers, but not both.

Mendel experimented on pea plants to verify these theories. He crossed plants that were true-breeding for various qualities, such as tall plants with small plants and purple-flowered plants with white-flowered plants, and he looked at the inheritance patterns in the progeny. He discovered that his results supported the particulate hypothesis because the qualities were inherited in a predictable, Mendelian manner (i.e. dominant and recessive genes). His data did not support the blending theory because the kids did not exhibit a blend of both features.

To learn more about hypothesis:

https://brainly.com/question/11555274

#SPJ4

1) H is partially positive F is partially negative

2) H is partially positive Br is partially negative

3) H is partially positive O is partially negative

4) C is partially positive O is partially negative.

When we talk about electronegativity, we mean the fact that, in the compound, there is a part that is partially negative and there is a part that is partially positive.

The part of the compound that is partially negative is the part of the compound that is able to attract the pair of electrons that are shared by the two atoms to itself.

Learn more about electronegativity:https://brainly.com/question/17762711

#SPJ1

The concentration of molecule and temperature has a positive correlation with the chemical reaction. The higher the concentration and temperature, the faster the reaction rate will be. The average kinetic can be calculated by using this formula KE = [tex]\frac{1}{2}mv^{2}[/tex].

There are some factors that affect the motion of the molecules:

If the concentration is increased, more particles move together. There will be more collisions and the chemical reaction rate is increased.

The rate of a chemical reaction can be changed caused by the temperature. If the temperature is increased, it will raise the average kinetic energy of the molecule and cause it moves more quickly.

The amount of kinetic energy can be calculated with the equation:

KE = [tex]\frac{1}{2}mv^{2}[/tex] . The kinetic energy of a moving object depends on its mass and velocity. The faster a molecule moves, the more kinetic energy it has.

Thus, increasing the concentration and temperature will increase the rate of reaction. The average kinetic energy can be calculated by using this formula KE = [tex]\frac{1}{2}mv^{2}[/tex]

Learn more about factors that affect the reaction rate by clicking this link :

https://brainly.com/question/14817541

#SPJ4

The given statement " organic structures are superior to mechanistic structures. " is  true because a mechanical organizational structure is distinguished by its high degree of oversight, and complexity, but also formalization.

An organic organizational structure, in the other hand hand, was distinguished by low centralization, formalization, as well as complexity.

An organic organizational system is fluid and adaptable. It is connected with decentralized decision-making, low hierarchies, broad spans of even more control, informal communication, and then a willingness to adapt to change.

Mechanistic Design The organization is built around a structured and formal network. It is ideal for firms that work in a precise or stable environment even though it was simple to maintain and requires little change.

__"The given question is incomplete. the complete question is:

Organic structures are superior to mechanistic structures"". __

(a) True

((b) False

To know more about mechanical organizational

https://brainly.com/question/13242672

#SPJ4

12. All 206 of our bones are structures.

13. Bases are built on solid ground so that they can support the structure.

14. When pulling on a rope you are giving it -tension

15. Tall buildings are seismically reinforced so they will not fall in an earthquake.

An arrangement and organization of related components in a physical object or system, or the organized object or system, is referred to as a structure.

Material structures include both natural and man-made objects, such as biological organisms, minerals, and chemicals, as well as man-made structures like buildings and machines.

Learn more about structures on:

https://brainly.com/question/27231354

#SPJ1

No, Covalent bond cant not be formed between a metal and non-metal.  ionic bonds between metals and nonmetals.

A covalent bond is formed when two atoms exchange one or more pairs of electrons. The two atomic nuclei are concurrently drawing these electrons to them. When the difference between the electronegativities of two atoms is too tiny for an electron transfer to take place to create ions, a covalent bond is formed. Bonding electrons are collectively referred to as the electrons that are present between the two nuclei. The "glue" that holds the atoms in molecular units together is the bound pair. By taking into account whether each element is a metal or nonmetal, it is possible to forecast the kind of bond that will develop between two elements. Covalent bonds between nonmetals, ionic bonds between metals and nonmetals, and metallic bonds between metals are the three types of bonds that typically form. Covalent bonds, which produce an irreversible binding and a high surface coverage, are mostly generated between side-chain-exposed functional groups of proteins and properly modified transducer surfaces. Covalent immobilisation is one of the most often utilised techniques, and it involves randomly coupling the antibody's free amino groups to a sensor surface.

For much more questions on covalent bond, Refer:

https://brainly.com/question/12732708

#SPJ4