Answer:
Explanation:When insulating materials rub against each other, they may become electrically charged . Electrons , which are negatively charged, may be 'rubbed off' one material and on to the other. The material that gains electrons becomes negatively charged.
We observe that a moving charged particle experiences no magnetic force. From this we can definitely conclude that: (A) No magnetic field exists in that region of space. (B) The particle must be moving parallel to the magnetic field. (C) Either no magnetic field exists or the particle is moving parallel to B. (D) Either no magnetic field exists or the particle is moving vertical (perpendicular) to B.
Answer:
(C) Either no magnetic field exists or the particle is moving parallel to B.
Explanation:
The moving charged particle tends to show no magnetic forces. Due to its moving in the same direction and will be parallel to the field. As when the magnetic fed and charged particle velocity is parallel then there will be no force. As the magnetic field are made by the generation of the current with the field line concentric to the current-carrying wire.A5 N object at a height has gravitational potential energy of 30 J. What is the height of the object?
30=5×h then divide both sides by 5 you will get h=6m
If a 5 N object at a height has a gravitational potential energy of 30 J , then the height of the object would be 6 meters.
What is mechanical energy?Mechanical energy is the combination of all the energy in motion represented by total kinetic energy and the total potential energy stored energy in the system which is represented by total potential energy.
As given in the problem a 5 N object at a height has gravitational potential energy of 30 J, then we have to find the height of the object.
Similarly, the total gravitational potential energy of the object,
PE = m × g × h
30 = 5 × h
h = 30 / 5
h = 6 meters
Thus, if a 5 N object at a height has a gravitational potential energy of 30 J, then the height of the object would be 6 meters.
To learn more about mechanical energy from here, refer to the link given below ;
brainly.com/question/12319302
#SPJ2
When the disks collide and stick together, their temperature rises. Calculate the increase in internal energy of the disks, assuming that the process is so fast that there is insufficient time for there to be much transfer of energy to the ice due to a temperature difference. (Also ignore the small amount of energy radiated away as sound produced in the collisions between the disks.)
Answer:
ΔT = [tex]\frac{\Delta K}{(m_1+m_2) c_e }[/tex]
Explanation:
This is an interesting problem, no data is given, so the result is a general expression.
Suppose that the disks are initially rotating with angular velocity w₁ and w₂, as well as that they have radii r₁ and r₂ and masses m₁ and m₂
we start the problem finding odl final angular velocity of the discs together, for this we define a system formed by the two discs, in this case the torques during the collision are internal and the angular momentum is conserved
initial instant. Just before the crash
L₀ = L₁ + L₂
with
L₁ = I₁ w₁
the moment of inertia of a disc with an axis passing through its center is
I₁ = ½ m₁ r₁²
we substitute
I₀ = ½ m₁ r₁² w₁ + ½ m₂ r₂² w₂
final instant. Right after the crash
L_f = I w
in angular momentum it is a scalar quantity, so it is additive
I = I₁ + I₂
angular momentum is conserved
L₀ = L_f
I₁ w₁ + I₂ w₂ = I w
w = [tex]\frac{ I_1 w_1 + I_2 w_2 }{I}[/tex] (1)
We already have the angular velocities of the system, let's find the kinetic energy of it
initial
K₀ = K₁ + K₂ = ½ I₁ w₁² + ½ I₂ w₂²
final
K_f = K = ½ I w²
the variation of the kinetic energy is the loss in the increase of the temperature of the system, they indicate us that we neglect the other possible losses
ΔK = K_f -K₀
ΔK = ½ I w² - (½ I₁ w₁² + ½ I₂ w₂²) (2)
In this chaos we know all the values for which the numerical value of ΔK can be calculated, the symbolic substitution gives expressions with complicated
Now if all this variation of energy turns into heat
Q = ΔK
m_{total} c_e ΔT = ΔK
where the specific heat of the bear discs must be known, suppose they are of the same material
ΔT = [tex]\frac{\Delta K}{(m_1+m_2) c_e }[/tex] (3)
to make a special case, we suppose some data
the discs have the same mass and radius, disc 2 is initially at rest and the discs are made of bronze that has c_e = 380 J / kg ºC
we look for the angular velocity
I₁ = I₂ = I₀
I = 2 I₀
we substitute in 1
w = [tex]\frac{I_o w_1 + I_o 0 }{2I_o}[/tex] I₀ w₁ + I₀ 0 / 2Io
w = w₁ /2
we look for the variation of the kinetic energy with 2
ΔK = ½ (2I₀) (w₁ /2)² - (½ I₀ w₁² + ½ I₀ 0)
ΔK = ¼ I₀ w₁² -½ I₀ w₁²
ΔK = - ¼ I₀ w₁²
the negative sign indicates that the kinetic energy decreases
We look for the change in Temperature with the expression 3
ΔT = [tex]\frac{ \Delta K}{(m_1 +m_2) c_e}[/tex]ΔK / (m1 + m2) ce
ΔT = [tex]\frac{ \frac{1}{4} I_o w_1^2 }{ 2m c_e}[/tex]
ΔT = [tex]\frac{1}{8} \frac{ (\frac{1}{2} m r_1^2 ) w_1^2 }{ m c_e}[/tex]
ΔT = [tex]\frac{1}{16} r_1^2 w_1^2 / c_e[/tex]
in this expression all the terms are contained
The increase in internal energy of the disks will be [tex]\rm \triangle E= mc\frac{\triangle k }{(m_1+m_2)c_e}[/tex].
What is internal energy?The energy contained within a thermodynamic system is known as its internal energy. It's the amount of energy required to build or prepare a system in any given internal state.
The given data in the problem is;
[tex]\rm \omega_1[/tex] is the angular velocity of disk 1
[tex]\rm \omega_2[/tex] is the angular velocity of disk 2
r₁ is the radius of disk 1
r₂ is the radius of disk 2
m₁ is the mass of disk 1
m₂ is the mass of disk 2
Momentum before the collision;
[tex]\rm L_1 = I_1 \omega_1[/tex]
The moment of inertia of disc 1
[tex]\rm i_1 = \frac{1}{2} m_1r_1^2[/tex]
The momentum gets conserved;
[tex]\rm L_0 = L_f \\\\ I_1 \omega_1 + I_2\omega_2 = I \omega \\\\ \rm \omega= \frac{I_1 \omega_1 + I_2\omega_2}{I}[/tex]
The change in the kinetic energy is;
[tex]\traingle KE= K_f - K_0 \\\\ \traingle KE= \frac{1}{2} I \omega^2-(\frac{1}{2} I_1\omega_1^2 + (\frac{1}{2} I_2\omega_2^2 )[/tex]
The change in the energy gets converted into heat;
[tex]\rm Q= \triangle k \\\\\ m_{total } c_e dt = \triangle k[/tex]
The change in the temperature is
[tex]\triangle T= \frac{\triangle k }{(m_1+m_2)c_e}[/tex]
The internal energy change is found by;
[tex]\rm \triangle E = mc_v dt[/tex]
[tex]\rm \triangle E= mc\frac{\triangle k }{(m_1+m_2)c_e}[/tex]
Hence the increase in internal energy of the disks will be [tex]\rm \triangle E= mc\frac{\triangle k }{(m_1+m_2)c_e}[/tex].
To learn more about the internal energy refer to the link;
https://brainly.com/question/11278589
Match the descriptions with the graphs !
Answer:
Graph 1 matches with B, 2 with A, and 3 with C.
Explanation:
Graph 2 shows a car whose distance part of the graph is not going up or down, while the time going up. That means that the car is stopped. Graph 1 shows a straight line, meaning that the car is traveling at a constant speed. Graph 3 is a curved line, meaning the speed of the car is changing somehow, and since the line is becoming more horizontal, the car is getting slower.
A 744 N force is applied to an object to reach an acceleration of 24 m/s2. What is the objects mass?
31kg
Explanation:
F = ma
m = F/a
m = 744N/24m/s^2
m = 31kg
(*Newton's Second Law*)
ocean currents are always cold true or false
A person drops a pebble of mass m1 from a height h, and it hits the floor with kinetic energy KE. The person drops another pebble of mass m2 from a height of 4h, and it hits the floor with the same kinetic energy KE. How do the masses of the pebbles compare
Hello,
QUESTION)✔ We have: KE = PE (potential energy)
PE = m x g x h
The potential energy that the pebble of mass 1 has is called PE1 and the potential energy that the pebble of mass 2 has is called PE2
PE1 = PE2 ⇔ PE1/PE2 = 1
[tex]\frac{m_1\times g\times h}{m_2\times g\times 4h} = 1 \\ \\ \frac{m_1}{m_2\times 4} = 1 \\ \\ \frac{m_1}{m_2} = 4[/tex]
The mass m1 is therefore 4 times greater than that of the stone of mass m2.
In 1994, Leroy Burrell of the United States set what was then a new world record for the men’s 100 m run. He ran the 1.00 102 m distance in 9.5 s. Assuming that he ran with a constant speed equal to his average speed, and his kinetic energy was 3.40 103 J, what was Burrell’s mass?
Answer:
61.33 Kg
Explanation:
From the question given above, the following data were obtained:
Distance = 1×10² m
Time = 9.5 s
Kinetic energy (KE) = 3.40×10³ J
Mass (m) =?
Next, we shall determine the velocity Leroy Burrell. This can be obtained as follow:
Distance = 1×10² m
Time = 9.5 s
Velocity =?
Velocity = Distance / time
Velocity = 1×10² / 9.5
Velocity = 10.53 m/s
Finally, we shall determine the mass of Leroy Burrell. This can be obtained as follow:
Kinetic energy (KE) = 3.40×10³ J
Velocity (v) = 10.53 m/s
Mass (m) =?
KE = ½mv²
3.40×10³ = ½ × m × 10.53²
3.40×10³ = ½ × m × 110.8809
3.40×10³ = m × 55.44045
Divide both side by 55.44045
m = 3.40×10³ / 55.44045
m = 61.33 Kg
Thus, the mass of Leroy Burrell is 61.33 Kg
Suppose that you changed the area of the bottom surface of the friction cart without changing its mass, by replacing the Teflon slab with one that was smaller but thicker. The contact area would shrink, but the normal force would be the same as before. Would this change the friction force on the sliding cart
Answer:
in this case the weight of the vehicle does not change , consequently the friction force should not change
Explanation:
The friction force is a macroscopic manifestation of the interactions of the molecules between the two surfaces, this force in the case of solid is expressed by the relation
fr = μ N
W-N= 0
N = W
as in this case the weight of the vehicle does not change nor does the Normal one, consequently the friction force should not change
A cyclist traveling at 5m/s uniformly accelerates up to 10 m/s in 2 seconds. Each tire of the bike has a 35 cm radius, and a small pebble is caught in the tread of one of them. (A) What is the angular acceleration of the pebble during those two seconds
Answer:
[tex]a=2.5\ m/s^2[/tex]
Explanation:
Given that,
Initial speed, u = 5 m/s
Final speed, v = 10 m/s
Time, t = 2 s
The radius of the tire of the bike, r = 35 cm
We need to find the angular acceleration of the pebble during those two seconds. It can be calculated as follows.
[tex]a=\dfrac{v-u}t{}\\\\a=\dfrac{10-5}{2}\\\\a=2.5\ m/s^2[/tex]
So, the required angular acceleration of the pebble is equal to [tex]2.5\ m/s^2[/tex].
An optical disk drive in your computer can spin a disk up to 10,000 rpm (about 1045 rad/s1045 rad/s ). If a particular disk is spun at 734.1 rad/s 734.1 rad/s while it is being read, and then is allowed to come to rest over 0.569 seconds0.569 seconds , what is the magnitude of the average angular acceleration of the disk
Answer:
[tex]1290.16\ \text{rad/s}^2[/tex]
Explanation:
[tex]\omega_i[/tex] = Initial angular velocity = 734.1 rad/s
[tex]\omega_f[/tex] = Final angular velocity = 0
t = Time = 0.569 seconds
[tex]\alpha[/tex] = Angular acceleration
From the kinematic equations of rotational motion we have
[tex]\omega_f=\omega_i+\alpha t\\\Rightarrow \alpha=\dfrac{\omega_f-\omega_i}{t}\\\Rightarrow \alpha=\dfrac{0-734.1}{0.569}\\\Rightarrow \alpha=-1290.16\ \text{rad/s}^2[/tex]
The magnitude of the average angular acceleration of the disk is [tex]1290.16\ \text{rad/s}^2[/tex].
True or false? A system must contain more than one object.
Answer:
true
Explanation:
normally -No system has ever performed well with one object.
A system must contain more than one object is a true statement.
What is system?A system is a group of interacting or interrelated objects that act according to a set of rules to form a unified whole.
Normally, no system has ever performed well with one object.
To learn more about System here
https://brainly.com/question/24893867
#SPJ2
Which of the following would produce the most power?
b
ОООО
A mass of 10 kilograms lifted 10 meters in 10 seconds
A mass of 5 kilograms lifted 10 meters in 5 seconds
A mass of 10 kilograms lifted 10 meters in 5 seconds
A mass of 5 kilograms lifted 5 meters in 10 seconds
d
Answer:
A mass of 10 kilograms lifted 10 meters in 5 seconds.
Explanation:
Power can be defined as the energy required to do work per unit time.
Mathematically, it is given by the formula;
[tex] Power = \frac {Energy}{time} [/tex]
But Energy = mgh
Substituting into the equation, we have
[tex] Power = \frac {mgh}{time} [/tex]
Given the following data;
Mass = 10kg
Height = 10m
Time = 5 seconds
We know that acceleration due to gravity is equal to 9.8 m/s²
[tex] Power = \frac {10*9.8*10}{5} = 490 Watts [/tex]
Hence, a mass of 10 kilograms lifted 10 meters in 5 seconds would produce the most power.
Which of the following parallel plate diagrams would have the greatest electric fields between them?
The greatest electric field between them is Option B.
An electric field is the physical subject that surrounds electrically charged particles and exerts a force on all other charged debris inside the area, either attracting or repelling them. It also refers back to the bodily field of a machine of charged particles.
Reasoning:-
Electric field = Kq/r²
Since the distance is inversely proportional to the square root of the distance between them. therefore decreasing the distance electric field will be the greatest. Hence Option B.
The electrical field is defined mathematically as a vector discipline that can be related to each point in space, the force in step with unit charge exerted on a fine take a look at the price at rest at that factor. the electric field is generated by the electrical rate or through time-varying magnetic fields. electric fields provide us with the pushing force we need to set off the contemporary float.
Learn more about electric fields here:-https://brainly.com/question/14372859
#SPJ1
BRAINLEST FOR CORRECT ANSWER PLEASE
Which has more momentum: a 3 kg sledgehammer swung at 1.5 m/s OR a 4 kg sledgehammer swung at 0.9 m/s? SHOW YOUR WORK
Answer:
Sledgehammer A has more momentum
Explanation:
Given:
Mass of Sledgehammer A = 3 Kg
Swing speed = 1.5 m/s
Mass of Sledgehammer B = 4 Kg
Swing speed = 0.9 m/s
Find:
More momentum
Computation:
Momentum = mv
Momentum sledgehammer A = 3 x 1.5
Momentum sledgehammer A = 4.5 kg⋅m/s
Momentum sledgehammer B = 4 x 0.9
Momentum sledgehammer B = 3.6 kg⋅m/s
Sledgehammer A has more momentum
The way you change the speed of a wave is to:
a
Change it's medium
b
Change it's energy
c
Transfer it to a new position
d
Apply a force
Answer:
transfer it to a new position
50 points help please
Answer:
C?
Explanation:
Yep,It's C all right.
Answer:
Yep,It's C all right.
Explanation:
Tom has a mass of 50,000 g and runs up a flight of stairs 4 m high in 12.5 seconds.
Calculate Tom’s power. (g = 10 m/s2)
Answer:
160 watts.
Explanation:
Remark
Power = Work / Time
Work = F * d
Note: Since he is running up stairs he is doing work against gravity.
Givens
m = 50000 g kg / 1000 grmsm = 50000 / 1000 = 50 kgh = 4 mtime = 12.5 secondsg = 10 m/s^2Formula
P = W * d/tW = m*g *d / tSolution
P = 50kg * 10 m/s^2 * 4 m / 12.5 P = 160 watts.
Fill in the graph for 50 points
Answer:
Speed: 3, 4, 5, 6. Distance: 1, 2, 3, 4, 5
Answer:
Speed: 3, 4, 5, 6. Distance: 1, 2, 3, 4, 5
Explanation:
If you wrap 150 coils of heavy wire around a big iron nail and attach the ends of the wire to a 6.0v battery, you have a A) radio B) electromagnet C) galvanometer D) ammeter
Answer:
B
Explanation:
Because of the voltage attached to the iron nail
The motor of a washing machine rotates with a period of 28 ms. What is the angular speed, in units of rad/s?
Answer:
2π/[28 x (10^-3)]
Explanation:
Angular speed : ω=2π/T
T = 28ms = 28 x (10^-3) s
Angular speed = 2π/[28 x (10^-3)]
which two options describes behaviors of particles that are related to the chemical properties of the materials
a- forming hydrogen bonds between them
b- reacting quickly with water
c- having a high mass
d- forming bonds with other atoms
Answer:
The two correct answers are B.) reacting quickly with water, and D.) forming bonds with other atoms.
Explanation:
I took the quiz on a.pex and these were correct.
30. Easy Guided Online Tutorial One object is at rest, and another is moving. The two collide in a one-dimensional, completely inelastic collision. In other words, they stick together after the collision and move off with a common velocity. Momentum is conserved. The speed of the object that is moving initially is 25 m/s. The masses of the two objects are 3.0 and 8.0 kg. Determine the final speed of the two-object system after the collision for the case when the large-mass object is the one moving initially and the case when the small-mass object is the one moving initially.
Answer:
[tex]18.18\ \text{m/s}[/tex]
[tex]6.82\ \text{m/s}[/tex]
Explanation:
[tex]m_1[/tex] = Mass of large object = 8 kg
[tex]m_2[/tex] = Mass of smaller object = 3 kg
When large mass is moving
[tex]u_1[/tex] = 25 m/s
[tex]u_2[/tex] = 0
For completely inelastic collision we have the relation
[tex]m_1u_1+m_2u_2=(m_1+m_2)v\\\Rightarrow v=\dfrac{m_1u_1+m_2u_2}{m_1+m_2}\\\Rightarrow v=\dfrac{8\times 25+3\times 0}{8+3}\\\Rightarrow v=18.18\ \text{m/s}[/tex]
Speed of the combined mass when the larger object is moving is [tex]18.18\ \text{m/s}[/tex]
When smaller mass is moving
[tex]u_1[/tex] = 0
[tex]u_2[/tex] = 25 m/s
[tex]v=\dfrac{m_1u_1+m_2u_2}{m_1+m_2}\\\Rightarrow v=\dfrac{8\times 0+3\times 25}{8+3}\\\Rightarrow v=6.82\ \text{m/s}[/tex]
Speed of the combined mass when the smaller object is moving is [tex]6.82\ \text{m/s}[/tex]
How much work is done in pushing an object 7.0 m across a floor with a force of 50 N and then
pushing it back to its original position? How much power is used if this work is done in 20 sec?
Answer:
35/2 J/s
Explanation:
Just use the 2 formulas
Work done = Force * distance moved
Power = Work done/time
WD = 7 * 50 = 350
Power = 350 / 20
= 35/2 J/s
At the end of the previous experiment, aclumsy scientist drops the coil, while still in the magnetic field, and still oriented with its plane perpendicular to the magnetic field, denting it and changing its shape to a semi-circle. The new shape has the same perimeter, but a different area, and it takes 0.036s to deform. What isthe average induced EMF during this mishap
Answer:
hello your question has some missing parts below are the missing parts
A Circular, 10-turn coil has a radius of 10.7 cm and is oriented with its plane perpendicular to a 0.2-T magnetic field.
answer : 1 volt
Explanation:
Determine the Average induced EMF during this mishap
A' = A/2 ( for a semi circle )
where A = [tex]\frac{\pi r^2}{2}[/tex]
To determine the Average induced EMF apply the relation below
| E | = η * [tex]\frac{\beta A}{T}[/tex] ----- ( 1 )
Replace A in equation 1 with A = [tex]\frac{\pi r^2}{2}[/tex]
hence equation becomes : | E | = η * βπr^2 / 2T'
where : T' = 0.0365 , β = 0.2 , η = 10 , r = 0.107
∴| E | = 0.999 ≈ 1volts
2. An object is dropped from rest. Calculate its velocity after 2.5s if it is dropped:
a.On Earth, where the acceleration due to gravity is 9.8m/s?
b. On Mars, where the acceleration due to gravity is 3.8m/s?
Answer:
a=24.5 b=9.5
Explanation:
Constructive interference occurs when the crest of 2 waves meet. This can occur when 2 troughs meet as well. When this occurs, water waves look
A- the same (no change)
B- larger
C- invisible
D- smaller
Answer:
B; LargerExplanation:
I took the K-12 quiz, and that was the correct answer. Hope this helped!
helllllpppppppppppp.
pleaseeeeeeee
Calculate the amount of torque of an object being pushed by 6 N force along a circular path of a radius of 1x10^-2 mat 30 degree angle
Answer:
[tex]\tau=0.03\ N-m[/tex]
Explanation:
Given that,
Force acting, F = 6N
The radius of the path, [tex]r=10^{-2}\ m[/tex]
Angle, [tex]\theta=30^{\circ}[/tex]
We need to find the amount of torque acting on the object. The formula for torque is given by :
[tex]\tau=Fr\sin\theta\\\\\tau=6\times 10^{-2}\times \sin(30)\\\\\tau=0.03\ N-m[/tex]
So, the required torque is equal to 0.03 N-m.
a forward horizontal force of 50 N is applied to crate a second horizontal force of 180 N is applied to crate in the opposite direction determine the magnitude and direction of the resultant force acting on the crate
Answer:
130n on the 2nd horizontal
Explanation:
Calculate the amount of torque of an object being pushed by 6 N force along a circular path of a radius of 1x10^-2 mat 30 degree angle.
Answer:
The amount of torque is 0.03 N.m.
Explanation:
To find the amount of torque we need to use the following equation:
[tex] \tau = \vec {r} \times \vec{F} = rFsin(\theta) [/tex] (1)
Where:
r: is the radius = 1x10⁻² m
F: is the force = 6 N
θ: is the angle = 30°
By entering the above values into equation (1) we have:
[tex]\tau = 1 \cdot 10^{-2} m*6 N*sin(30) = 0.03 N.m[/tex]
Therefore, the amount of torque is 0.03 N.m.
I hope it helps you!