Answer:
Please see below as the answer is self-explanatory.
Explanation:
In order to have a destructive interference, the path difference between the sources of the sound, must be equal to an odd multiple of the semi-wavelength, as follows: ⇒ d = d₂ - d₁ = n*(λ/2) The minimum posible value for this distance, is when n=1, as it can be seen here: dmin = λ/2 In any traveling wave, there exists a fixed relationship between the wave speed, the frequency and the wavelength: v = λ*f Therefore, assuming that the speed of sound keeps constant, if the frequency is increased, in order to keep the right side of the expression above balanced, λ must be decreased.As the smallest separation that produces destructive interference is directly proportional to the wavelength, this means that this separation will decrease if the cellists produced a note with a higher frequency.A student weighing 5.4 × 102 newtons takes 15 seconds to run up a hill. The top of the hill is 10 meters vertically above her starting point. What power does the student develop during her run?
Answer:
P = 360 Watts
Explanation:
Given that,
The weight of a student, [tex]F=5.4\times 10^2\ N[/tex]
It takes 15 seconds to run up a hill.
The top of the hill is 10 meters vertically above her starting point.
We need to find the power develop during her run. We know that te power developed is given by :
[tex]P=\dfrac{W}{t}\\\\P=\dfrac{mgh}{t}\\\\P=\dfrac{5.4\times 10^2\times 10}{15}\\\\P=360\ W[/tex]
So, the power develop during her run is 360 W.
A 0.38 kg drinking glass is filled with a hot liquid. The liquid transfers 7032 J of energy to the glass. If the
temperature of the glass increases by 22 K, what is the specific heat of the glass?
Answer:
841 J/kg.K
Explanation:
The computation of the specific hear of the glass is shown below:
As we know that
E= cmΔt
where
c denotes specific heat
m denotes 0.38 kg
Δt = temperature = 22k
E denotes energy = 7032 J
Now
7032 J = (0.38) (22) (c)
7032 J = 8.36 (c)
So C = 7032 J ÷ 8.36
= 841 J/kg.K
A river flows with a uniform velocity vr. A person in a motorboat travels 1.22 km upstream, at which time she passes a log floating by. Always with the same engine throttle setting, the boater continues to travel upstream for another 1.45 km, which takes her 69.1 min. She then turns the boat around and returns downstream to her starting point, which she reaches at the same time as the same log does. How much time does the boater spend traveling back downstream
Answer:
t ’= [tex]\frac{1450}{0.6499 + 2 v_r}[/tex], v_r = 1 m/s t ’= 547.19 s
Explanation:
This is a relative velocity exercise in a dimesion, since the river and the boat are going in the same direction.
By the time the boat goes up the river
v_b - v_r = d / t
By the time the boat goes down the river
v_b + v_r = d '/ t'
let's subtract the equations
2 v_r = d ’/ t’ - d / t
d ’/ t’ = 2v_r + d / t
[tex]t' = \frac{d'}{ \frac{d}{t}+ 2 v_r }[/tex]
In the exercise they tell us
d = 1.22 +1.45 = 2.67 km= 2.67 10³ m
d ’= 1.45 km= 1.45 1.³ m
at time t = 69.1 min (60 s / 1min) = 4146 s
the speed of river is v_r
t ’= [tex]\frac{1.45 \ 10^3}{ \frac{ 2670}{4146} \ + 2 \ v_r}[/tex]
t ’= [tex]\frac{1450}{0.6499 + 2 v_r}[/tex]
In order to complete the calculation, we must assume a river speed
v_r = 1 m / s
let's calculate
t ’= [tex]\frac{ 1450}{ 0.6499 + 2 \ 1}[/tex]
t ’= 547.19 s
A baseball player hits a 0.15 kg 0.15kg0, point, 15, start text, k, g, end text baseball that is initially at rest, changing its momentum by 11 kg ⋅ m s 11 s kg⋅m 11, start fraction, start text, k, g, end text, dot, start text, m, end text, divided by, start text, s, end text, end fraction.
Answer:
73.3m/s
Explanation:
We can find the velocity of the player.
Momentum = mass * velocity
Given
Mass = 0.15kg
Momentum = 11kgm/s
Get the velocity
Velocity = Momentum/Mass
Velocity = 11/0.15
Velocity = 73.3m/s
Hence the velocity of the player is 73.3m/s
A car traveling 85 km/h is 250 m behind a truck
traveling 73 km/h.
Time needed = t = 20.83 s
Further explanationGiven
car speed = 85 km/h
truck speed = 73 km/h
Required
the time it takes for the car to reach the truck
Solution
When the car reaches the truck, the distance between them will be the same
x car - 250 m = x truck
General formula for distance (d) :
d = v.t
So the equation becomes :
85t-250 = 73t
12t=250
t = 20.83 s
What is the mass of an object if it is moving at a speed of 10 m/s and has 400 J of kinetic energy?
Answers:
8 kg
Explanation:
Kinetic Energy = (mass × velocity × velocity) ÷ 2
We know that Kinetic Energy = 400 J and velocity = 10 m/s.
KE = (m × v × v) ÷ 2
400 J = (m × 10 m/s × 10 m/s) ÷ 2
400 J = m × 50 m^2/s^2
To find the mass you will divide 400 J and 50 m^2/s^2.
m = 8 kg
You can also check it if it gives you 400 J.
KE = (m × v × v) ÷ 2
KE = (8 kg × 10 m/s × 10 m/s) ÷ 2
KE = 400 J
So this means that the mass is 8 kg. I know that it is a bit confusing, but when you do J (joules) ÷ m^2/s^2 = kg (kilograms). Hope this helps, thank you !!
A simple pendulum of length 5.5 m makes 10.0 complete swings in 25 s what is the acceleration due to gravity at the location of the pendulum ?
Answer:
The acceleration due to gravity at the location of the pendulum is 34.74 m/s².
Explanation:
Given that,
The length of a simple pendulum, l = 5.5 m
It makes 10.0 complete swings in 25 s.
Frequency of pendulum,
[tex]f=\dfrac{10}{25}\\\\f=0.4\ Hz[/tex]
The time period of a simple pendulum is given by :
[tex]T=2\pi \sqrt{\dfrac{l}{g}}[/tex]
Frequency,
[tex]f=\dfrac{1}{T}\\\\f=\dfrac{1}{2\pi \sqrt{\dfrac{l}{g}} }\\\\f=\dfrac{1}{2\pi}\sqrt{\dfrac{g}{l}}[/tex]
g is the acceleration due to gravity at the location where the pendulum is placed. So,
[tex]f^2=\dfrac{g}{4\pi^2l}\\\\g=f^2\times 4\pi^2l\\\\g=0.4^2\times 4\pi^2\times 5.5\\\\g=34.74\ m/s^2[/tex]
So, the acceleration due to gravity at the location of the pendulum is 34.74 m/s².
One reason why it’s often easy to miss an action-reaction pair is because of the ________ of one of the objects.
Answer:
an action-reaction pair is because one of the objects is often much more massive and appears to remain motionless when a force acts on it. It has so much inertia, or tendency to remain at rest, that it hardly
Pam rubs a balloon on her head to generate a static charge. She holds the balloon up against a wall. Which of the following describes the electric charges and forces at work if the balloon sticks to the wall?
Electrons move from Pam’s hair to the balloon and attract electrons in the wall.
Electrons move from Pam’s hair to the balloon and attract protons in the wall.
Protons move from Pam’s hair to the balloon and attract protons in the wall.
Protons in the balloon form chemical bonds with protons in the wall.
Answer:
c
Explanation:
If the balloon sticks to the wall then electrons move from Pam’s hair to the balloon and attract protons in the wall.
One of the ways of producing static electricity is by the use of friction. Friction occurs when two surfaces are rubbed together. This leads to the loss of electrons from one of the surface which attracts the protons on another surface.
If the balloon sticks to the wall then electrons move from Pam’s hair to the balloon and attract protons in the wall.
Learn more about static electricity:https://brainly.com/question/821085
The "problem of perception" is best characterized as?
Answer:
making sense of a 3-d world from 2-d data
Explanation:
A car is sitting still. It accelerates to a constant speed then it decelerates again to zero speed. While the car is accelerating how do the directions of the angular acceleration and angular velocity of one of the wheels compare
Answer:
in the acceleration process the quantity α and w must increase
the deceleration process the alpha quantity must constant a direction opposite to the angular velocity
Explanation:
Acceleration and angular velocity are related to linear
v = w xr
a = αx r
The bold letters indicate vectors and the cross is a vector product, therefore if
we can see that the relationship between linear and angular variables is direct
therefore in the acceleration process the quantity α and w must increase as well as their linear counterparts
in the deceleration process the alpha quantity must constant as the linear acceleration and must have a direction opposite to the angular velocity
Choose the best explanation from among the following:_________.
1. Charge is conserved, and therefore the mass of the object will remain the same.
2. A positive charge increases an object's mass; a negative charge decreases its mass.
3. To give the object a negative charge we must give it more electrons, and this will increase its mass.
Answer: 3. To give the object a negative charge we must give it more electrons, and this will increase its mass.
Explanation:
Suppose we have an object and we negatively charge it.
Then we are "adding" N electrons to the object.
Remember that the mass of an electron is:
m = 9.11*10^(-31) kg
Then if we add N electrons to an object of mass M, the new mass of the object will be:
Mass = M + N*9.11*10^(-31) kg
So we will have an (almost negligible) increase of the mass of the object.
(Something similar can happen if the object is positively charged, where we remove electrons, then the mass of the object decreases)
Then the correct option is:
3. To give the object a negative charge we must give it more electrons, and this will increase its mass.
Through what potential difference should electrons be accelerated so that their speed is 1.0 % of the speed of light when they hit the target
Answer:
Explanation:
Considering non - relativistic approach : ----
Speed of electron = 1 % of speed of light
= .01 x 3 x 10⁸ m /s
= 3 x 10⁶ m /s
Kinetic energy of electron = 1/2 m v²
= .5 x 9.1 x 10⁻³¹ x ( 3 x 10⁶ )²
= 40.95 x 10⁻¹⁹ J
Kinetic energy in electron comes from lose of electrical energy equal to
Ve where V is potential difference under which electron is accelerated and e is electronic charge .
V x e = kinetic energy of electron
V x 1.6 x 10⁻¹⁹ = 40.95 x 10⁻¹⁹
V = 25.6 Volt .
Which plate is the South American plate?
Answer:
The south American plate
define stress engineering science
Answer:
Stress, in physical sciences and engineering, force per unit area within materials that arises from externally applied forces, uneven heating, or permanent deformation and that permits an accurate description and prediction of elastic, plastic, and fluid behaviour.
I hope it's helpful!
According to Coulomb's Law, if the distance between two charged particles is doubled, the electric force will be _________. *
Answer: reduced by 1/4
Explanation:
The force will be reduced by 1/4. Try plugging in 2r, then squaring it. You will get 4r^2, which is essentially dividing the force by 4
Fred's lightbulb is 45% efficient, and Fran's is 75% efficient. If they both use the same amount of electric energy, which produces more light energy?
Answer:
Frank's 75% efficient light bulb will shine brighter.
Explanation:
The brightness of a bulb is gotten from the power equation;
P = I²R
The more the power rating in watts, the more the brightness.
Now, if they both use the same amount of energy but yet have different efficiency, it means we will just multiply the efficiency by the power.
Thus, 75% efficiency will yield more power than a 45% efficient one.
Therefore, Frank's light bulb will shine brighter.
I’m not sure how to solve this
Answer:
Option 10. 169.118 J/KgºC
Explanation:
From the question given above, the following data were obtained:
Change in temperature (ΔT) = 20 °C
Heat (Q) absorbed = 1.61 KJ
Mass of metal bar = 476 g
Specific heat capacity (C) of metal bar =?
Next, we shall convert 1.61 KJ to joule (J). This can be obtained as follow:
1 kJ = 1000 J
Therefore,
1.61 KJ = 1.61 KJ × 1000 J / 1 kJ
1.61 KJ = 1610 J
Next, we shall convert 476 g to Kg. This can be obtained as follow:
1000 g = 1 Kg
Therefore,
476 g = 476 g × 1 Kg / 1000 g
476 g = 0.476 Kg
Finally, we shall determine the specific heat capacity of the metal bar. This can be obtained as follow:
Change in temperature (ΔT) = 20 °C
Heat (Q) absorbed = 1610 J
Mass of metal bar = 0.476 Kg
Specific heat capacity (C) of metal bar =?
Q = MCΔT
1610 = 0.476 × C × 20
1610 = 9.52 × C
Divide both side by 9.52
C = 1610 / 9.52
C = 169.118 J/KgºC
Thus, the specific heat capacity of the metal bar is 169.118 J/KgºC
What is the difference between elastic PE and gravitational PE?
Which object exerts the action force?
Which object exerts the reaction force?
In what direction does the action force push?
In what direction does the reaction force push?
For answering this question,let us assume that a person is pushing against the walls,so now:
Which object exerts the action force?
PersonWhich object exerts the reaction force?
WallIn what direction does the action force push?
BackwardIn what direction does the reaction force push?
ForwardThe answer varies from different scenarios.
Answer:
diver, diving board, down, and up.
Explanation:
Carousel conveyors are used for storage and order picking for small parts. The conveyorsrotate clockwise or counterclockwise, as necessary, to position storage bins at the storageand retrieval point. The conveyors are closely spaced, such that the operators travel timebetween conveyors is negligible. The conveyor rotation time for each item equals 1 minute;the time required for the operator to retrieve an item after the conveyor stops rotatingequals 0.25 minute. How many carousel conveyors can one operator tend without creatingidle time on the part of the conveyors
Answer:
the number of carousel conveyors that an operator can operate without any idle time is 5
Explanation:
Given the data in the question;
first we express the equation for number of carousel conveyors that can be operated by an operator;
n' = [tex]\frac{(a + t)}{( a + b)}[/tex]
where a is the concurrent activity time ( 0.25 minute )
b is the independent operator activity time
t is the independent machine activity time( 1 )
Now independent activity time is zero as the operator is not performing any inspection or packaging tasks.
So time taken for the operator to retrieve the finished item at the end of the process is the concurrent activity and independent machine activity time, the conveyor rotation time of each item
so
we substitute
0.25min for a, 1 for t and 0min for b
n' = [tex]\frac{(0.25min + 1min)}{( 0.25min+ 0 min)}[/tex]
n' = 1.25 min / 0.25
n' - 5
Therefore, the number of carousel conveyors that an operator can operate without any idle time is 5
A bottle of water at a room temperature of 21.0 C is placed into a refrigerator
with an air temperature of 4.5C. The thermal energy will move — *
A. from the cooler air to lower the temperature of the water to 4.5 C
B. in both directions until the temperature is equal in the water and the air
C. from the water to the air until the water temperature is zero degrees Celsius
O D. from the water to the air until the temperature is equal in both
Answer:
B. in both directions until the temperature is equal in the water and the air
Explanation:
When a warm body is in contact with a cool body , there is exchange of heat energy in both sides until there is attainment of equilibrium temperature . At this temperature both the body attains equal temperature . Initially rate of heat radiated by warm body is more than that from cool body , but after attainment of equilibrium , the rate becomes equal to each other . This is called dynamic equilibrium .
Hence option B is correct .
Points A, B, and C lie along a line from left to right, respectively. Point B is at a lower electric potential than point A. Point C is at a lower electric potential than point B. What would best describes the subsequent motion, if any, of a positively-charged particle released from rest at point B?
Answer:
Please see below as the answer is self-explanatory.
Explanation:
If the potential at B is lower than A, and the potential at C is lower than B, this means that there is an electric field, directed from A to C.If a positively-charged particle is released at rest at point B, it will be accelerated by the electric field (which is a force per unit charge, so it produces an acceleration) in the same direction than the field (because it is a positive charge) towards point C.The surface area of a postage
stamp is 0.00600 m^2, and the air
exerts 1.00 atm of pressure on it.
How much force does it exert on
the stamp?
(Hint: The standard unit for
pressure is Pa.)
(Unit = N)
Answer:
Force = 607.95 Newton
Explanation:
Given the following data;
Area = 0.00600 m^2
Pressure = 1 atm to Pascal = 101325 Pa
To find the force;
Pressure = Force/area
Force = pressure * area
Substituting into the equation, we have;
Force = 101325 * 0.00600
Force = 607.95 Newton.
Therefore, the amount of force exerted by the air on the stamp is 607.95 Newton.
A police officer is parked by the side of the road, when a speeding car travelling at 50 mi/hrpasses. The police car immediately pursues it, accelerating at a rate of 10 mi/hr per second.The road is fairly busy, so the officer will not go faster than a top speed of 70 mi/hr. How longwill it take before the officer catches up to the speeding car, and how far will it have travelled inorder to do so
Answer:
a) time taken to catch up with speeding car is 12.25 secs
b) the police car will travel 273.8 m to catch up with the speeding car
Explanation:
Given that;
speed of car [tex]V_{c}[/tex] = 50 mi/hr = 22.352 m/s
acceleration of police car = 10 mi/hr = 4.47 m/s²
[tex]V_{f}[/tex] = 70 mi/hr = 31.29 m/s
Now time taken to reach maximum speed is t₁
so
[tex]V_{f}[/tex] = [tex]V_{i}[/tex] + at₁
we substitute
31.29 = 0 + 4.47t₁
t₁ = 31.29 / 4.47
t₁ = 7 sec
now
d₁ = 0 + 1/2 × at₁²
d₁ = 0 + 1/2 × 0 + 4.47×(7)²
d₁ = 109.5 m
so distance travelled by the speeding car in time t₁ will be
[tex]d_{c}[/tex] = [tex]V_{c}[/tex] × t₁
we substitute
[tex]d_{c}[/tex] = 22.352 × 7
[tex]d_{c}[/tex] = 156.46 m
now distance between polive car and speeding car
Δd = [tex]d_{c}[/tex] - d₁
Δd = 156.46 - 109.5
Δd = 46.96 m
time taken to cover Δd will be
t₂ = Δd / ( [tex]V_{f}[/tex] - [tex]V_{c}[/tex] )
t₂ = 46.96 / ( 31.29 - 22.352 )
t₂ = 46.96 / 8.938
t₂ = 5.25 sec
distance travelled by the police in time t₂ will be
d₂ = [tex]V_{f}[/tex] × t₂
d₂ = 31.29 × 5.25
d₂ = 164.3 m
a) How long will it take before the officer catches up to the speeding car;
time taken to catch up with speeding car;
t = t₁ + t₂
t = 7 + 5.25
t = 12.25 secs
Therefore, time taken to catch up with speeding car is 12.25 secs
b) how far will it have travelled in order to do so;
distance = d₁ + d₂
distance = 109.5 + 164.3
distance = 273.8 m
Therefore, the police car will travel 273.8 m to catch up with the speeding car
in a football game, the kicker kicks a football a horizontal distance of 43 yards if the ball lands 3.9 seconds later, what is the balls horizontal velocity
Answer:
10s
Explanation:
Horizontal velocity is the velocity of an object in an horizontal direction
The ball's horizontal velocity is approximately 33.078 ft./s
Reason:
The known parameter are;
The horizontal distance the footballer kicks the ball, d = 43 yards
The time after which the ball lands, Δt = 3.9 seconds
Required:
To find the velocity of the ball
Solution:
[tex]Velocity = \dfrac{Distance}{Time} = \dfrac{d}{\Delta t}[/tex]
Therefore;
[tex]Horizontal \ velocity \ of \ the \ ball, \ v_x= \dfrac{43 \ yard}{3.9 \ seconds} \approx 11.026 \ yd/s[/tex]
The ball's horizontal velocity, vₓ ≈ 11.026 yd/s
1 yard = 3 feet
[tex]11.026 \ yard = 11.026 \ yard \times \dfrac{3 \ feet}{yard} = 22.078 \ feet[/tex]
The ball's horizontal velocity, vₓ ≈ 33.078 ft./s
Learn more about horizontal velocity here:
https://brainly.com/question/14898646
Predictions about the future based on the position of planets is an example of
- physics
- biology
- earth science
- pseudoscience
Answer:
astronomi
Explanation:
sciemce ya ya
A friend comments to you that there was a beautiful, thin sliver of a Moon visible in the early morning just before sunrise. Which phase of the Moon would this be, and in what direction would you look to see the Moon (in the southern sky, on the eastern horizon, on the western horizon, high in the sky, etc.)?
Answer: Waning Crescent
Explanation:
A plastic rod 1.6 m long is rubbed all over with wool, and acquires a charge of -9e-08 coulombs. We choose the center of the rod to be the origin of our coordinate system, with the x-axis extending to the right, the y-axis extending up, and the z-axis out of the page. In order to calculate the electric field at location A = < 0.7, 0, 0 > m, we divide the rod into 8 pieces, and approximate each piece as a point charge located at the center of the piece.
Solution :
Length of the plastic rod , L = 1.6 m
Total charge on the plastic rod , Q = [tex]$-9 \times 10^{-8}$[/tex] C
The rod is divided into 8 pieces.
a). The length of the 8 pieces is , [tex]$l=\frac{L}{8}$[/tex]
[tex]$=\frac{1.6}{8}$[/tex]
= 0.2 m
b). Location of the center of the piece number 5 is given as : 0 m, -0.09375 m, 0 m.
c). The charge q on the piece number 5 is given as
[tex]$q=\frac{Q}{L}\times l$[/tex]
[tex]$q=\frac{-9 \times 10^{-8}}{1.6}\times0.2$[/tex]
= [tex]$-1.125 \times 10^{-8}$[/tex] C
d). WE approximate that piece 5 as a point charge and we need to find out the field at point A(0.7 m, 0, 0) only due to the charge.
We know, the Coulombs force constant, k = [tex]$8.99 \times 10^9 \ N.m^2/C^2$[/tex]
So the X component of the electric field at the point A is given as
[tex]$E_x = 8.99 \times 10^9 \times 1 \times 10^{-8} \ \cos \frac{187.628}{0.70625}$[/tex]
= -126.15 N/C
The Y component of the electric field at the point A is
[tex]$E_y = 8.99 \times 10^9 \times 1 \times 10^{-8} \ \sin \frac{187.628}{0.70625}$[/tex]
= -16.93 N/C
Now since the rod and the point A is in the x - y plane, the z component of the field at point A due to the piece 5 will be zero.
∴ [tex]$E_z=0$[/tex]
Thus, [tex]$E= <-126.15,-16.93,0>$[/tex]
Suppose two skiers (A and B) are racing. Assume a frictionless surface! They start from the top of a mountain at the same time, and glide down to the flat area below. Just before the finish line there is a ditch. The skiers can either go down into the ditch or take a flat bridge over the ditch. Both the bridge and the ditch are covered with frictionless snow. Skier A decides to go down into the ditch. Skier B decides to go over the bridge. . Which skier gets to the finish line first, or do they arrive at the same time?
a. Skier A (ditch) arrives first
b. Skier B (bridge) arrives first
c. The skiers arrive at the same time
d. Neither skier arrives at the finish line
Answer:
b. Skier B (bridge) arrives first
Explanation:
This is because, skier B continues along the bring with the same velocity he started with before moving over the bridge and since the bridge is frictionless, he losses no kinetic energy and his speed is constant.
Whereas, skier A losses kinetic energy as he goes into the ditch. This is due to his change in potential energy. He thus emerges from the ditch with lesser kinetic energy than skier B and thus a slower speed.
Therefore, skier B arrives first since he moves at a constant speed.