Answer:
0.045 J
Explanation:
From the question,
The elastic potential energy stored in a spring is given as,
E = 1/2ke²...................... Equation 1
Where E = elastic potential energy, k = spring constant, e = compression.
Given: k = 100 N/m, e = 0.05-0.02 = 0.03 m
Substitute these values into equation 1
E = 1/2(100)(0.03²)
E = 50(9×10⁻⁴)
E = 0.045 J
Hence the right option is 0.045 J
Two carts connected by a 0.05 m spring hit a wall, compressing the spring to 0.02 m.The spring constant k is 100 N/m.
What is the elastic potential energy stored from the spring’s compression?
Answer: 0.045 J
The electric field must be zero inside a conductor in electrostatic equilibrium, but not inside an insulator. It turns out that we can still apply Gauss's law to a Gaussian surface that is entirely within an insulator by replacing the right-hand side of Gauss's law, Qin/eo, with Qin/e, where ε is the permittivity of the material. (Technically, Eo is called the vacuum permittivity.) Suppose that a 70 nC point charge is surrounded by a thin, 32-cm-diameter spherical rubber shell and that the electric field strength inside the rubber shell is 2500 N/C.
What is the permittivity of rubber?
Answer:
The permittivity of rubber is [tex]\epsilon = 8.703 *10^{-11}[/tex]
Explanation:
From the question we are told that
The magnitude of the point charge is [tex]q_1 = 70 \ nC = 70 *10^{-9} \ C[/tex]
The diameter of the rubber shell is [tex]d = 32 \ cm = 0.32 \ m[/tex]
The Electric field inside the rubber shell is [tex]E = 2500 \ N/ C[/tex]
The radius of the rubber is mathematically evaluated as
[tex]r = \frac{d}{2} = \frac{0.32}{2} = 0.16 \ m[/tex]
Generally the electric field for a point is in an insulator(rubber) is mathematically represented as
[tex]E = \frac{Q}{ \epsilon } * \frac{1}{4 * \pi r^2}[/tex]
Where [tex]\epsilon[/tex] is the permittivity of rubber
=> [tex]E * \epsilon * 4 * \pi * r^2 = Q[/tex]
=> [tex]\epsilon = \frac{Q}{E * 4 * \pi * r^2}[/tex]
substituting values
[tex]\epsilon = \frac{70 *10^{-9}}{2500 * 4 * 3.142 * (0.16)^2}[/tex]
[tex]\epsilon = 8.703 *10^{-11}[/tex]
Given a double slit apparatus with slit distance 1 mm, what is the theoretical maximum number of bright spots that I would see when I shine light with a wavelength 400 nm on the slits
Answer:
The maximum number of bright spot is [tex]n_{max} =5001[/tex]
Explanation:
From the question we are told that
The slit distance is [tex]d = 1 \ mm = 0.001 \ m[/tex]
The wavelength is [tex]\lambda = 400 \ nm = 400*10^{-9 } \ m[/tex]
Generally the condition for interference is
[tex]n * \lambda = d * sin \theta[/tex]
Where n is the number of fringe(bright spots) for the number of bright spots to be maximum [tex]\theta = 90[/tex]
=> [tex]sin( 90 )= 1[/tex]
So
[tex]n = \frac{d }{\lambda }[/tex]
substituting values
[tex]n = \frac{ 1 *10^{-3} }{ 400 *10^{-9} }[/tex]
[tex]n = 2500[/tex]
given there are two sides when it comes to the double slit apparatus which implies that the fringe would appear on two sides so the maximum number of bright spots is mathematically evaluated as
[tex]n_{max} = 2 * n + 1[/tex]
The 1 here represented the central bright spot
So
[tex]n_{max} = 2 * 2500 + 1[/tex]
[tex]n_{max} =5001[/tex]
your washer has a power of 350 watts and your dryer has a power of 1800 watts how much energy do you use to clean a load of clothes in 1 hour of washing and 1 hour of drying?
A. 1.29 x 10^3 J
B. 2.58 x 10^3 J
C. 1.55 x 10^7 J
D. 7.74 x 10^6 J
Answer:
7.74 x 10⁶ Joules
Explanation:
recall that "Watts" is the SI unit used for "energy per unit time"
Hence "Watts" may also be expressed as Joules / Second (or J/s)
We are given that the washer is rated at 350W (i.e. 350 Joules / s) and the dryer is rated at 1800W (i.e. 1800 Joules / s).
We are also given that the appliances are each run for 1 hour
1 hour = 60 min = (60 x 60) seconds = 3600 seconds
Hence the total energy used,
= Energy used by Washer in 1 hour + Energy used by dryer in 1 hour
= (350 J/s x 3600 s) + (1800 J/s x 3600 s)
= 3600 ( 350 + 1800)
= 3600 (2150)
= 7,740,000 Joules
= 7.74 x 10⁶ Joules
An electron has an initial velocity of (17.1 + 12.7) km/s, and a constant acceleration of (1.60 × 1012 m/s2) in the positive x direction in a region in which uniform electric and magnetic fields are present. If = (529 µT) find the electric field .
Answer:
Explanation:
Since B is perpendicular, it does no work on the electron but instead deflects it in a circular path.
q = 1.6 x 10-19 C
v = (17.1j + 12.7k) km/s = square root(17.1² + 12.7²) = 2.13 x 10⁴ m/s
the force acting on electron is
F= qvBsinΦ
F= (1.6 x 10⁻¹⁹C)(2.13.x 10⁴ m/s)(526 x 10⁻⁶ T)(sin90º)
F = 1.793x 10⁻¹⁸ N
The net force acting on electron is
F = e ( E+ ( vXB)
= ( - 1.6 × 10⁻¹⁹) ( E + ( 17.1 × 10³j + 12.7 × 10³ k)X( 529 × 10⁻⁶ ) (i)
= ( -1.6 × 10⁻¹⁹ ) ( E- 6.7k + 9.0j)
a= F/m
1.60 × 10¹² i = ( -1.6 × 10⁻¹⁹ ) ( E- 6.9 k + 7.56 j)/9.11 × 10⁻³¹
9.11 i = - ( E- 6.7 k + 9.0 j)
E = -9.11i + 6.7k - 9.0j
PLS HELP ILL MARK U BRAINLIEST I DONT HAVE MUCH TIME!!
A football player of mass 103 kg running with a velocity of 2.0 m/s [E] collides head-
on with a 110 kg player on the opposing team travelling with a velocity of 3.2 m/s
[W]. Immediately after the collision the two players move in the same direction.
Calculate the final velocity of the two players.
Answer:
The final velocity of the two players is 0.69 m/s in the direction of the opposing player.
Explanation:
Since the players are moving in opposite directions, from the principle of conservation of linear momentum;
[tex]m_{1} u_{1}[/tex] - [tex]m_{2}u_{2}[/tex] = [tex](m_{1} + m_{2} )[/tex] v
Where: [tex]m_{1}[/tex] is the mass of the first player, [tex]u_{1}[/tex] is the initial velocity of the first player, [tex]m_{2}[/tex] is the mass of the second player, [tex]u_{2}[/tex] is the initial velocity of the second player and v is the final common velocity of the two players after collision.
[tex]m_{1}[/tex] = 103 kg, [tex]u_{1}[/tex] = 2.0 m/s, [tex]m_{2}[/tex] = 110 kg, [tex]u_{2}[/tex] = 3.2 m/s. Thus;
103 × 2.0 - 110 × 3.2 = (103 + 110)v
206 - 352 = 213 v
-146 = 213 v
v = [tex]\frac{-146}{213}[/tex]
v = -0.69 m/s
The final velocity of the two players is 0.69 m/s in the direction of the opposing player.
An experimenter finds that standing waves on a string fixed at both ends occur at 24 Hz and 32 Hz , but at no frequencies in between. Part A What is the fundamental frequency
Answer:
8 Hz
Explanation:
Given that
Standing wave at one end is 24 Hz
Standing wave at the other end is 32 Hz.
Then the frequency of the standing wave mode of a string having a length, l, is usually given as
f(m) = m(v/2L), where in this case, m could be 1. 2. 3. 4 etc
Also, another formula is given as
f(m) = m.f(1), where f(1) is the fundamental frequency..
Thus, we could say that
f(m+1) - f(m) = (m + 1).f(1) - m.f(1) = f(1)
And as such,
f(1) = 32 - 24
f(1) = 8 Hz
Then, the fundamental frequency needed is 8 Hz
(a) According to Hooke's Law, the force required to hold any spring stretched x meters beyond its natural length is f(x)=kx. Suppose a spring has a natural length of 20 cm. If a 25-N force is required to keep it stretched to a length of 30 cm, how much work is required to stretch it from 20 cm to 25 cm?
(b) Find the area of the region enclosed by one loop of the curve r=2sin(5θ).
Answer:
a) The work required to stretch the spring from 20 centimeters to 25 centimeters is 0.313 joules, b) The area of the region enclosed by one loop of the curve [tex]r(\theta) = 2\cdot \sin 5\theta[/tex] is [tex]4\pi[/tex].
Explanation:
a) The work, measured in joules, is a physical variable represented by the following integral:
[tex]W = \int\limits^{x_{f}}_{x_{o}} {F(x)} \, dx[/tex]
Where
[tex]x_{o}[/tex], [tex]x_{f}[/tex] - Initial and final position, respectively, measured in meters.
[tex]F(x)[/tex] - Force as a function of position, measured in newtons.
Given that [tex]F = k\cdot x[/tex] and the fact that [tex]F = 25\,N[/tex] when [tex]x = 0.3\,m - 0.2\,m[/tex], the spring constant ([tex]k[/tex]), measured in newtons per meter, is:
[tex]k = \frac{F}{x}[/tex]
[tex]k = \frac{25\,N}{0.3\,m-0.2\,m}[/tex]
[tex]k = 250\,\frac{N}{m}[/tex]
Now, the work function is obtained:
[tex]W = \left(250\,\frac{N}{m} \right)\int\limits^{0.05\,m}_{0\,m} {x} \, dx[/tex]
[tex]W = \frac{1}{2}\cdot \left(250\,\frac{N}{m} \right)\cdot [(0.05\,m)^{2}-(0.00\,m)^{2}][/tex]
[tex]W = 0.313\,J[/tex]
The work required to stretch the spring from 20 centimeters to 25 centimeters is 0.313 joules.
b) Let be [tex]r(\theta) = 2\cdot \sin 5\theta[/tex]. The area of the region enclosed by one loop of the curve is given by the following integral:
[tex]A = \int\limits^{2\pi}_0 {[r(\theta)]^{2}} \, d\theta[/tex]
[tex]A = 4\int\limits^{2\pi}_{0} {\sin^{2}5\theta} \, d\theta[/tex]
By using trigonometrical identities, the integral is further simplified:
[tex]A = 4\int\limits^{2\pi}_{0} {\frac{1-\cos 10\theta}{2} } \, d\theta[/tex]
[tex]A = 2 \int\limits^{2\pi}_{0} {(1-\cos 10\theta)} \, d\theta[/tex]
[tex]A = 2\int\limits^{2\pi}_{0}\, d\theta - 2\int\limits^{2\pi}_{0} {\cos10\theta} \, d\theta[/tex]
[tex]A = 2\cdot (2\pi - 0) - \frac{1}{5}\cdot (\sin 20\pi-\sin 0)[/tex]
[tex]A = 4\pi[/tex]
The area of the region enclosed by one loop of the curve [tex]r(\theta) = 2\cdot \sin 5\theta[/tex] is [tex]4\pi[/tex].
The average density of the body of a fish is 1080kg/m^3 . To keep from sinking, the fish increases its volume by inflating an internal air bladder, known as a swim bladder, with air.
By what percent must the fish increase its volume to be neutrally buoyant in fresh water? Use 1.28kg/m^3 for the density of air at 20 degrees Celsius. (change in V/V)
Answer:
Increase of volume (F) = 8.01%
Explanation:
Given:
Density of fish = 1,080 kg/m³
Density of water = 1,000 kg/m³
density of air = 1.28 kg/m³
Find:
Increase of volume (F)
Computation:
1,080 kg/m³ + [F × 1.28 kg/m³ ] = (1+F) × 1,000 kg/m³
1,080 + 1.28 F =1,000 F + 1,000
80 = 998.72 F
F = 0.0801 (Approx)
F = 8.01% (Approx)
1. A ski-plane with a total mass of 1200 kg lands towards the west on a frozen lake at 30.0
m/s. The coefficient of kinetic friction between the skis and the ice is 0.200. How far does
the plane slide before coming to a stop?
Answer:
d = 229.5 m
Explanation:
It is given that,
Total mass of a ski-plane is 1200 kg
It lands towards the west on a frozen lake at 30.0 m/s.
The coefficient of kinetic friction between the skis and the ice is 0.200.
We need to find the distance covered by the plane before coming to rest. In this case,
[tex]\mu mg=ma\\\\a=\mu g\\\\a=0.2\times 9.8\\\\a=1.96\ m/s^2[/tex]
It is decelerating, a = -1.96 m/s²
Now using the third equation of motion to find the distance covered by the plane such that :
[tex]v^2-u^2=2ad\\\\d=\dfrac{-u^2}{2a}\\\\d=\dfrac{-(30)^2}{2\times -1.96}\\\\d=229.59\ m[/tex]
So, the plane slide a distance of 229.5 m.
what is mean by the terminal velocity
Terminal Velocity is the constant speed that a falling thing reaches when the resistence of a medium prevents the thing to reach any further speed.
Best of Luck!
Charge of uniform surface density (0.20 nC/m2) is distributed over the entire xy plane. Determine the magnitude of the electric field at any point having z
The question is not complete, the value of z is not given.
Assuming the value of z = 4.0m
Answer:
the magnitude of the electric field at any point having z(4.0 m) =
E = 5.65 N/C
Explanation:
given
σ(surface density) = 0.20 nC/m² = 0.20 × 10⁻⁹C/m²
z = 4.0 m
Recall
E =F/q (coulumb's law)
E = kQ/r²
σ = Q/A
A = 4πr²
∴ The electric field at point z =
E = σ/zε₀
E = 0.20 × 10⁻⁹C/m²/(4 × 8.85 × 10⁻¹²C²/N.m²)
E = 5.65 N/C
Consider the Earth and the Moon as a two-particle system.
Find an expression for the gravitational field g of this two-particle system as a function of the distance r from the center of the Earth. (Do not worry about points inside either the Earth or the Moon. Assume the Moon lies on the +r-axis. Give the scalar component of the gravitational field. Do not substitute numerical values; use variables only. Use the following as necessary: G, Mm, Me, r, and d for the distance from the center of Earth to the center of the Moon.)"
sorry but I don't understand
A crate of mass 9.2 kg is pulled up a rough incline with an initial speed of 1.58 m/s. The pulling force is 110 N parallel to the incline, which makes an angle of 20.2° with the horizontal. The coefficient of kinetic friction is 0.400, and the crate is pulled 5.10 m.A) How much work is done by the gravitational force on thecrate?
B) Determine the increase in internal energy of the crate-inclinesystem owing to friction.
C) How much work is done by the 100N force on the crate?
D) What is the change in kinetic energy of the crate?
E) What is the speed of the crate after being pulled 5.00m?
Given that,
Mass = 9.2 kg
Force = 110 N
Angle = 20.2°
Distance = 5.10 m
Speed = 1.58 m/s
(A). We need to calculate the work done by the gravitational force
Using formula of work done
[tex]W_{g}=mgd\sin\theta[/tex]
Where, w = work
m = mass
g = acceleration due to gravity
d = distance
Put the value into the formula
[tex]W_{g}=9.2\times(-9.8)\times5.10\sin20.2[/tex]
[tex]W_{g}=-158.8\ J[/tex]
(B). We need to calculate the increase in internal energy of the crate-incline system owing to friction
Using formula of potential energy
[tex]\Delta U=-W[/tex]
Put the value into the formula
[tex]\Delta U=-(-158.8)\ J[/tex]
[tex]\Delta U=158.8\ J[/tex]
(C). We need to calculate the work done by 100 N force on the crate
Using formula of work done
[tex]W=F\times d[/tex]
Put the value into the formula
[tex]W=100\times5.10[/tex]
[tex]W=510\ J[/tex]
We need to calculate the work done by frictional force
Using formula of work done
[tex]W=-f\times d[/tex]
[tex]W=-\mu mg\cos\theta\times d[/tex]
Put the value into the formula
[tex]W=-0.4\times9.2\times9.8\cos20.2\times5.10[/tex]
[tex]W=-172.5\ J[/tex]
We need to calculate the change in kinetic energy of the crate
Using formula for change in kinetic energy
[tex]\Delta k=W_{g}+W_{f}+W_{F}[/tex]
Put the value into the formula
[tex]\Delta k=-158.8-172.5+510[/tex]
[tex]\Delta k=178.7\ J[/tex]
(E). We need to calculate the speed of the crate after being pulled 5.00m
Using formula of change in kinetic energy
[tex]\Delta k=\dfrac{1}{2}m(v_{2}^2-v_{1}^{2})[/tex]
[tex]v_{2}^2=\dfrac{2\times\Delta k}{m}+v_{1}^2[/tex]
Put the value into the formula
[tex]v_{2}^2=\dfrac{2\times178.7}{9.2}+1.58[/tex]
[tex]v_{2}=\sqrt{\dfrac{2\times178.7}{9.2}+1.58}[/tex]
[tex]v_{2}=6.35\ m/s[/tex]
Hence, (A). The work done by the gravitational force is -158.8 J.
(B). The increase in internal energy of the crate-incline system owing to friction is 158.8 J.
(C). The work done by 100 N force on the crate is 510 J.
(D). The change in kinetic energy of the crate is 178.7 J.
(E). The speed of the crate after being pulled 5.00m is 6.35 m/s
Which statement describes one feature of a mineral's definite chemical composition?
It always occurs in pure form.
It always contains certain elements.
It cannot form from living or once-living materials.
It cannot contain atoms from more than one element.
N
Answer:
It always contains certain elements
Explanation:
Minerals can be defined as natural inorganic substances which possess an orderly internal structural arrangement as well as a particular, well known chemical composition, crystal structures and physical properties. Minerals include; quartz, dolomite, basalt, etc. Minerals may occur in isolation or in rock formations.
Minerals contain specific, well known chemical elements in certain ratios that can only vary within narrow limits. This is what we mean by a mineral's definite chemical composition. The structure of these minerals are all well known as well as their atom to atom connectivity.
The statement describes one feature of a mineral's definite chemical composition - It always contains certain elements.
A mineral is a naturally occurring chemical compound, usually of a crystalline form.
A mineral has one specific chemical composition.chemical composition that varies within a specific limited range and the atoms that make up the mineral must occur in specific ratiosthe proportions of the different elements and groups of elements in the mineral.Thus, The statement describes one feature of a mineral's definite chemical composition - It always contains certain elements.
Learn more:
https://brainly.com/question/690965
Use Kepler's third law to determine how many days it takes a spacecraft to travel in an elliptical orbit from a point 6 590 km from the Earth's center to the Moon, 385 000 km from the Earth's center.
Answer:
1.363×10^15 seconds
Explanation:
The spaceship travels an elliptical orbit from a point of 6590km from the earth center to the moon and 38500km from the earth center.
To calculate the time taken from Kepler's third Law :
T^2 = ( 4π^2/GMe ) r^3
Where Me is the mass of the earth
r is the average distance travel
G is the universal gravitational constant. = 6.67×10-11 m3 kg-1 s-2
π = 3.14
Me = mass of earth = 5.972×10^24kg
r =( r minimum + r maximum)/2 ......1
rmin = 6590km
rmax = 385000km
From equation 1
r = (6590+385000)/2
r = 391590/2
r = 195795km
From T^2 = ( 4π^2/GMe ) r^3
T^2 = (4 × 3.14^2/ 6.67×10-11 × 5.972×10^24) × 195795^3
= ( 4×9.8596/ 3.983×10^14 ) × 7.5059×10^15
= 39.4384/ 3.983×10^14 ) × 7.5059×10^15
= (9.901×10^14) × 7.5059×10^15
T^2 = 7.4321× 10^30
T =√7.4321× 10^30
T = 2.726×10^15 seconds
The time for one way trip from Earth to the moon is :
∆T = T/2
= 2.726×10^15 /2
= 1.363×10^15 secs
Given small samples of three liquids, you are asked to determine their refractive indexes. However, you do not have enough of each liquid to measure the angle of refraction for light retracting from air into the liquid. Instead, for each liquid, you take a rectangular block of glass (n= 1.52) and Place a drop of the liquid on the top surface f the block. you shine a laser beam with wavelength 638 nm in vacuum at one Side of the block and measure the largest angle of incidence for which there is total internal reflection at the interface between the glass and the liquid. Your results are given in the table.
Liquid A B C
θ 52.0 44.3 36.3
Required:
a. What is the refractive index of liquid A at this wavelength?
b. What is the refractive index of liquid B at this wavelength?
c. What is the refractive index of liquid C at this wavelength?
Answer:
A — 1.198B — 1.062C — 0.900Explanation:
The index of refraction of the liquid can be computed from ...
[tex]n_i\sin{(\theta_t)}=n_t[/tex]
where ni is the index of refraction of the glass block (1.52) and θt is the angle at which there is total internal refraction. nt is the index of refraction of the liquid.
For the given incidence angles, the computed indices of refraction are ...
A: n = 1.52sin(52.0°) = 1.198
B: n = 1.52sin(44.3°) = 1.062
C: n = 1.52sin(36.3°) = 0.900
5) What is the weight of a body in earth. if its weight is 5Newton
in moon?
Answer:
8.167
Explanation:
What is the work done in stretching a spring by a distance of 0.5 m if the restoring force is 24N?
Answer:
3Nm
Explanation:
work = 0.5 x 12 x 0.5 = 3
The work done in stretching the spring by a distance of 0.5 m, with a restoring force of 24 N, is 6 joules.
To calculate the work done in stretching a spring, we can use the formula for work done by a spring:
Work = (1/2) * k *[tex]x^2[/tex]
where:
k = spring constant
x = distance the spring is stretched
Given that the restoring force (F) acting on the spring is 24 N, and the distance the spring is stretched (x) is 0.5 m, we can find the spring constant (k) using Hooke's law:
F = k * x
k = F / x
k = 24 N / 0.5 m
k = 48 N/m
Now, we can calculate the work:
Work = (1/2) * 48 N/m * [tex](0.5 m)^2[/tex]
Work = (1/2) * 48 N/m * [tex]0.25 m^2[/tex]
Work = 6 joules
Therefore, the work done in stretching the spring by a distance of 0.5 m, with a restoring force of 24 N, is 6 joules.
To know more about work done, here
brainly.com/question/2750803
#SPJ2
An interference pattern is produced by light with a wavelength 550 nm from a distant source incident on two identical parallel slits separated by a distance (between centers) of 0.500 mm .
a. If the slits are very narrow, what would be the angular position of the second- order, two-slit interference maxima?
b. Let the slits have a width 0.300 mm. In terms of the intensity lo at the center of the central maximum, what is the intensity at the angular position in part "a"?
Answer:
a
[tex]\theta = 0.0022 rad[/tex]
b
[tex]I = 0.000304 I_o[/tex]
Explanation:
From the question we are told that
The wavelength of the light is [tex]\lambda = 550 \ nm = 550 *10^{-9} \ m[/tex]
The distance of the slit separation is [tex]d = 0.500 \ mm = 5.0 *10^{-4} \ m[/tex]
Generally the condition for two slit interference is
[tex]dsin \theta = m \lambda[/tex]
Where m is the order which is given from the question as m = 2
=> [tex]\theta = sin ^{-1} [\frac{m \lambda}{d} ][/tex]
substituting values
[tex]\theta = 0.0022 rad[/tex]
Now on the second question
The distance of separation of the slit is
[tex]d = 0.300 \ mm = 3.0 *10^{-4} \ m[/tex]
The intensity at the the angular position in part "a" is mathematically evaluated as
[tex]I = I_o [\frac{sin \beta}{\beta} ]^2[/tex]
Where [tex]\beta[/tex] is mathematically evaluated as
[tex]\beta = \frac{\pi * d * sin(\theta )}{\lambda }[/tex]
substituting values
[tex]\beta = \frac{3.142 * 3*10^{-4} * sin(0.0022 )}{550 *10^{-9} }[/tex]
[tex]\beta = 0.06581[/tex]
So the intensity is
[tex]I = I_o [\frac{sin (0.06581)}{0.06581} ]^2[/tex]
[tex]I = 0.000304 I_o[/tex]
A Ferris wheel starts at rest and builds up to a final angular speed of 0.70 rad/s while rotating through an angular displacement of 4.9 rad. What is its average angular acceleration
Answer:
The average angular acceleration is 0.05 radians per square second.
Explanation:
Let suppose that Ferris wheel accelerates at constant rate, the angular acceleration as a function of change in angular position and the squared final and initial angular velocities can be clear from the following expression:
[tex]\omega^{2} = \omega_{o}^{2} + 2 \cdot \alpha\cdot (\theta-\theta_{o})[/tex]
Where:
[tex]\omega_{o}[/tex], [tex]\omega[/tex] - Initial and final angular velocities, measured in radians per second.
[tex]\alpha[/tex] - Angular acceleration, measured in radians per square second.
[tex]\theta_{o}[/tex], [tex]\theta[/tex] - Initial and final angular position, measured in radians.
Then,
[tex]\alpha = \frac{\omega^{2}-\omega_{o}^{2}}{2\cdot (\theta-\theta_{o})}[/tex]
Given that [tex]\omega_{o} = 0\,\frac{rad}{s}[/tex], [tex]\omega = 0.70\,\frac{rad}{s}[/tex] and [tex]\theta-\theta_{o} = 4.9\,rad[/tex], the angular acceleration is:
[tex]\alpha = \frac{\left(0.70\,\frac{rad}{s} \right)^{2}-\left(0\,\frac{rad}{s} \right)^{2}}{2\cdot \left(4.9\,rad\right)}[/tex]
[tex]\alpha = 0.05\,\frac{rad}{s^{2}}[/tex]
Now, the time needed to accelerate the Ferris wheel uniformly is described by this kinematic equation:
[tex]\omega = \omega_{o} + \alpha \cdot t[/tex]
Where [tex]t[/tex] is the time measured in seconds.
The time is cleared and obtain after replacing every value:
[tex]t = \frac{\omega-\omega_{o}}{\alpha}[/tex]
If [tex]\omega_{o} = 0\,\frac{rad}{s}[/tex], [tex]\omega = 0.70\,\frac{rad}{s}[/tex] and [tex]\alpha = 0.05\,\frac{rad}{s^{2}}[/tex], the required time is:
[tex]t = \frac{0.70\,\frac{rad}{s} - 0\,\frac{rad}{s} }{0.05\,\frac{rad}{s^{2}} }[/tex]
[tex]t = 14\,s[/tex]
Average angular acceleration is obtained by dividing the difference between final and initial angular velocities by the time found in the previous step. That is:
[tex]\bar \alpha = \frac{\omega-\omega_{o}}{t}[/tex]
If [tex]\omega_{o} = 0\,\frac{rad}{s}[/tex], [tex]\omega = 0.70\,\frac{rad}{s}[/tex] and [tex]t = 14\,s[/tex], the average angular acceleration is:
[tex]\bar \alpha = \frac{0.70\,\frac{rad}{s} - 0\,\frac{rad}{s} }{14\,s}[/tex]
[tex]\bar \alpha = 0.05\,\frac{rad}{s^{2}}[/tex]
The average angular acceleration is 0.05 radians per square second.
Oceanographers often express the density of sea water in units of kilograms per cubic meter. If the density of sea water is 1.025 g/cm3 at 15ºC, what is its density in kilograms per cubic meter?
Answer: The density in kilograms per cubic meter is 1025
Explanation:
Density is defined as mass contained per unit volume.
Given : Density of sea water = [tex]1.025g/cm^3[/tex]
Conversion : [tex]1.025g/cm^3=?kg/m^3[/tex]
As 1 g = 0.001 kg
Thus 1.025 g =[tex]\frac{0.001}{1}\times 1.025=0.001025kg[/tex]
Also [tex]1cm^3=10^{-6}m^3[/tex]
Thus [tex]1.025g/cm^3=\frac{0.001025}{10^{-6}kg/m^3}=1025kg/m^3[/tex]
Thus density in kilograms per cubic meter is 1025
A car moving at a speed of 25 m/s enters a curve that traces a circular quarter turn of radius 129 m. The driver gently applies the brakes, slowing the car with a constant tangential acceleration of magnitude 1.2 m/s2.a) Just before emerging from the turn, what is the magnitudeof the car's acceleration?
b) At that same moment, what is the angle q between the velocity vector and theacceleration vector?
I am having trouble because this problem seems to have bothradial and tangential accleration. I tried finding the velocityusing V^2/R, but then that didnt take into account thedeceleration. Any help would be great.
Answer:
8.7 m/s^2
82.15°
Explanation:
Given:-
- The initial speed of the car, vi = 25 m/s
- The radius of track, r = 129 m
- Car makes a circular " quarter turn "
- The constant tangential acceleration, at = 1.2 m/s^2
Solution:-
- We will solve the problem using rotational kinematics. Determine the initial angular velocity of car ( wi ) as follows:
[tex]w_i = \frac{v_i}{r} \\\\w_i = \frac{25}{129}\\\\w_i = 0.19379 \frac{rad}{s}[/tex]
- Now use the constant tangential acceleration ( at ) and determine the constant angular acceleration ( α ) for the rotational motion as follows:
at = r*α
α = ( 1.2 / 129 )
α = 0.00930 rad/s^2
- We know that the angular displacement from the initial entry to the exit of the turn is quarter of a turn. The angular displacement would be ( θ = π/2 ).
- Now we will use the third rotational kinematic equation of motion to determine the angular velocity at the exit of the turn (wf) as follows:
[tex]w_f^2 = w_i^2 + 2\alpha*theta\\\\w_f = \sqrt{0.19379^2 + 0.00930\pi } \\\\w_f = 0.25840 \frac{rad}{s}[/tex]
- We will use the evaluated final velocity ( wf ) and determine the corresponding velocity ( vf ) as follows:
[tex]v_f = r*w_f\\\\v_f = 129*0.2584\\\\v_f = 33.33380 \frac{x}{y}[/tex]
- Now use the formulation to determine the centripetal acceleration ( ac ) at this point as follows:
[tex]a_c = \frac{v_f^2}{r} \\\\a_c = \frac{33.3338^2}{129} \\\\a_c = 8.6135 \frac{m}{s^2}[/tex]
- To determine the magnitude of acceleration we will use find the resultant of the constant tangential acceleration ( at ) and the calculated centripetal acceleration at the exit of turn ( ac ) as follows:
[tex]|a| = \sqrt{a^2_t + a_c^2} \\\\|a| = \sqrt{1.2^2 + 8.6135^2} \\\\|a| = 8.7 \frac{m}{s^2}[/tex]
- To determine the angle between the velocity vector and the acceleration vector. We need to recall that the velocity vector only has one component and always tangential to the curved path. Hence, the velocity vector is parallel to the tangential acceleration vector ( at ). We can use the tangential acceleration ( at ) component of acceleration ( a ) and the centripetal acceleration ( ac ) component of the acceleration and apply trigonometric ratio as follows:
[tex]q = arctan \frac{a_c}{a_t} = arctan \frac{8.7}{1.2} \\\\q = 82.15 ^.[/tex]
Answer: The angle ( q ) between acceleration vector ( a ) and the velocity vector ( v ) at the exit of the turn is 82.15° .
How do I find an apparent weight in N for a metal connected to a string submerged in water if a scale shows the mass 29.52 g when it is submerged ? Also how do I measure its density
The Tension of the string is going to be less when submerged in water by a value called the buoyancy force, so below in the attached file is explanation on how to calculate the apparent weight and density of the submerged object
In a double-slit interference experiment you are asked to use laser light of different wavelengths and determine the separation between adjacent maxima. You observe that this separation is greatest when you illuminate the double slit with In a double-slit interference experiment you are asked to use laser light of different wavelengths and determine the separation between adjacent maxima. You observe that this separation is greatest when you illuminate the double slit with:_________.
1. yellow light.
2. red light.
3. blue light.
4. green light.
5. The separation is the same for all wavelengths.
Answer:
Red light
Explanation:
This because All interference or diffraction patterns depend upon the wavelength of the light (or whatever wave) involved. Red light has the longest wavelength (about 700 nm)
A 2.5-kg object falls vertically downward in a viscous medium at a constant speed of 2.5 m/s. How much work is done by the force the viscous medium exerts on the object as it falls 80 cm?
Answer:
The workdone is [tex]W_v = - 20 \ J[/tex]
Explanation:
From the question we are told that
The mass of the object is [tex]m = 2.5 \ kg[/tex]
The speed of fall is [tex]v = 2.5 \ m/s[/tex]
The depth of fall is [tex]d = 80\ cm = 0.8 \ m[/tex]
Generally according to the work energy theorem
[tex]W = \frac{1}{2} mv_2^2 - \frac{1}{2} mv_1^2[/tex]
Now here given the that the velocity is constant i.e [tex]v_1 = v_2 = v[/tex] then
We have that
[tex]W = \frac{1}{2} mv^2 - \frac{1}{2} mv^2 = 0 \ J[/tex]
So in terms of workdone by the potential energy of the object and that of the viscous liquid we have
[tex]W = W_v - W_p[/tex]
Where [tex]W_v[/tex] is workdone by viscous liquid
[tex]W_p[/tex] is the workdone by the object which is mathematically represented as
[tex]W_p = mgd[/tex]
So
[tex]0 = W_v + mgd[/tex]
=> [tex]W_v = - m * g * d[/tex]
substituting values
[tex]W_v = - (2.5 * 9.8 * 0.8)[/tex]
[tex]W_v = - 20 \ J[/tex]
Calculate the angular momentum of a solid uniform sphere with a radius of 0.150 m and a mass of 13.0 kg if it is rotating at 5.70 rad/s about an axis through its center.
Answer:
The angular momentum of the solid sphere is 0.667 kgm²/s
Explanation:
Given;
radius of the solid sphere, r = 0.15 m
mass of the sphere, m = 13 kg
angular speed of the sphere, ω = 5.70 rad/s
The angular momentum of the solid sphere is given;
L = Iω
Where;
I is the moment of inertia of the solid sphere
ω is the angular speed of the solid sphere
The moment of inertia of solid sphere is given by;
I = ²/₅mr²
I = ²/₅ x (13 x 0.15²)
I = 0.117 kg.m²
The angular momentum of the solid sphere is calculated as;
L = Iω
L = 0.117 x 5.7
L = 0.667 kgm²/s
Therefore, the angular momentum of the solid sphere is 0.667 kgm²/s
Legacy issues $570,000 of 8.5%, four-year bonds dated January 1, 2019, that pay interest semiannually on June 30 and December 31. They are issued at $508,050 when the market rate is 12%.
1. Determine the total bond interest expense to be recognized.
Total bond interest expense over life of bonds:
Amount repaid:
8 payments of $24,225 $193,800
Par value at maturity 570,000
Total repaid 763,800
Less amount borrowed 645 669
Total bond interest expense $118.131
2. Prepare a straight-line amortization table for the bonds' first two years.
Semiannual Period End Unamortized Discount Carrying Value
01/01/2019
06/30/2019
12/31/2019
06/30/2020
12/31/2020
3. Record the interest payment and amortization on June 30. Note:
Date General Journal Debit Credit
June 30
4. Record the interest payment and amortization on December 31.
Date General Journal Debit Credit
December 31
Answer:
1) Determine the total bond interest expense to be recognized.
Total bond interest expense over life of bonds:
Amount repaid:
8 payments of $24,225: $193,800
Par value at maturity: $570,000
Total repaid: $763800 (193,800 + 570,000)
Less amount borrowed: $508050
Total bond interest expense: $255750 (763800 - 508,050)
2)Prepare a straight-line amortization table for the bonds' first two years.
Semiannual Interest Period End; Unamortized Discount; Carrying Value
01/01/2019 61,950 508,050
06/30/2019 54,206 515,794
12/31/2019 46,462 523,538
06/30/2020 38,718 531,282
12/31/2020 30,974 539,026
3) Record the interest payment and amortization on June 30:
June 30 Bond interest expense, dr 31969
Discount on bonds payable, Cr (61950/8) 7743.75
Cash, Cr ( 570000*8.5%/2) 24225
4) Record the interest payment and amortization on December 31:
Dec 31 Bond interest expense, Dr 31969
Discount on bonds payable, Cr 7744
Cash, Cr 24225
A coil has resistance of 20 W and inductance of 0.35 H. Compute its reactance and its impedance to an alternating current of 25 cycles/s.
Answer:
Reactance of the coil is 55 WImpedance of the coil is 59 WExplanation:
Given;
Resistance of the coil, R = 20 W
Inductance of the coil, L = 0.35 H
Frequency of the alternating current, F = 25 cycle/s
Reactance of the coil is calculated as;
[tex]X_L=[/tex] 2πFL
Substitute in the given values and calculate the reactance [tex](X_L)[/tex]
[tex]X_L =[/tex] 2π(25)(0.35)
[tex]X_L[/tex] = 55 W
Impedance of the coil is calculated as;
[tex]Z = \sqrt{R^2 + X_L^2} \\\\Z = \sqrt{20^2 + 55^2} \\\\Z = 59 \ W[/tex]
Therefore, the reactance of the coil is 55 W and Impedance of the coil is 59 W
A circular coil of wire of 200 turns and diameter 2.0 cm carries a current of 4.0 A. It is placed in a magnetic field of 0.70 T with the plane of the coil making an angle of 30° with the magnetic field. What is the magnetic torque on the coil?
Answer:
0.087976 Nm
Explanation:
The magnetic torque (τ) on a current-carrying loop in a magnetic field is given by;
τ = NIAB sinθ --------- (i)
Where;
N = number of turns of the loop
I = current in the loop
A = area of each of the turns
B = magnetic field
θ = angle the loop makes with the magnetic field
From the question;
N = 200
I = 4.0A
B = 0.70T
θ = 30°
A = π d² / 4 [d = diameter of the coil = 2.0cm = 0.02m]
A = π x 0.02² / 4 = 0.0003142m² [taking π = 3.142]
Substitute these values into equation (i) as follows;
τ = 200 x 4.0 x 0.0003142 x 0.70 sin30°
τ = 200 x 4.0 x 0.0003142 x 0.70 x 0.5
τ = 200 x 4.0 x 0.0003142 x 0.70
τ = 0.087976 Nm
Therefore, the torque on the coil is 0.087976 Nm
at the temperature at which we live, earth's core is solid or liquid?
Explanation:
The Earth has a solid inner core