Answer:
A. The balls stick and move together.
Explanation:
When a bodies undergo perfectly inelastic collision, the two bodies stick together after the collision and begins to move.
In this collision, kinetic energy is not conserved. For perfectly elastic collision, the two bodies conserve kinetic energy and begin to move apart.
Kinetic energy is not conserved because some of the energy gets converted into other forms of energy.
solve the dimension of work in physics
Explanation:
W=F×s
=> W= [MLT^-2] [L]
W= [ML2T-2]
pls help !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Answer:
the last answer is correct.
Explanation:
If one team pulls with more force than the middle flag or marker will move
Two forces, F1 and F2, are applied to a block on a frictionless, horizontal surface
as shown below. If the magnitude of the block's acceleration is 2.0 meters per
second2, what is the mass of the block? *
F, = 12 N
F2 =2N
Block
Frictionless surface
Answer:
F, = 12N. F, = 2 N. Block. 4) a 20.0-kg mass moving at 1.00 m/s.
Explanation:
The mass of the block on the frictionless horizontal surface is 5 kg.
The given parameters;
magnitude of the first force, F₁ = 12 Nmagnitude of the second force, F₂ = 2 Nacceleration of the block, a = 2 m/s²The mass of the block is determined by applying Newton's second law of motion;
F = ma
[tex]\Sigma F = ma\\\\F_1 - F_2 = ma\\\\12 - 2 = 2m\\\\10 = 2m\\\\m = 5 \ kg[/tex]
Thus, the mass of the block on the frictionless horizontal surface is 5 kg.
Learn more here:https://brainly.com/question/19887955
What two things must you know to describe the motion of an object? __________________________________________________________________________
Distance is _________________________________________________________________
What is the displacement of a cyclist, who travels 1 mile north, then 1 mile east, and finally 1 mile south? ___________________________
Define speed ________________________________________________________________
How do speed and velocity differ? ______________________________________________
__________________________________________________________________________
How do velocities combine? In opposite directions? ________________________________ In the same direction? ________________________________________________________
A river flows at a velocity of 3 km/h relative to the riverbank. A boat moves upstream at a velocity of 15 km/h relative to the river. What is the velocity of the boat relative to the riverbank? ___________________________________
The rate at which velocity changes is called ________________________
True or false? Acceleration is the result of increases or decreases in speed.
A horse on a carousel that is moving at a constant speed is accelerating because _________________________________________________________________________
True or false? When the final velocity is less than the initial velocity of an object, the acceleration is negative.
The total distance traveled divided by the total time is _______________________
What are some common units for speed (give at least two) _____________ ___________
Define velocity ____________________________________________________________
Define acceleration _________________________________________________________
A quantity that has both magnitude and direction is called a _________________.
WILL MARK BRAINLIEST PLEASE HELP DUE IN 2 MINS
On a distance-time graph speed is a ____________ line and thus a ____________ graph.
On a distance-time graph acceleration is a ___________ line and thus a _______________ graph.
Answer:
velocity is vector Quantity
Two types of energy can be either kinetic or potential energy. Identify those two types. For each type, explain why it can be either kinetic or potential. -Help fast i have my test soon!
Answer:
All forms of energy are either kinetic or potential. The energy associated with motion is called kinetic energy . The energy associated with position is called potential energy . Potential energy is not "stored energy".
Explanation:
A balloon-powered car rolls across the floor at a speed of 0.711 m/s. How long does it take to cover 8.25 m?
Answer:
Time = 11.60 seconds.
Explanation:
Speed can be defined as distance covered per unit time. Speed is a scalar quantity and as such it has magnitude but no direction.
Mathematically, speed is given by the equation;
[tex]Speed = \frac{distance}{time}[/tex]
Given the following data;
Speed = 0.711m/s
Distance = 8.25m
To find the time;
Making time the subject of formula, we have;
[tex]Time = \frac{distance}{speed}[/tex]
Substituting into the equation, we have;
[tex]Time = \frac{8.25}{0.711}[/tex]
Time = 11.60 secs.
Sometimes, I have to take my cat, Gigi, in the car. She doesn’t like this, and tends to hide under the couch when she knows she has to go. This means I have to drag her out. Assuming she is using her claws to try and stop me, identify the forces acting on Gigi, and draw a free body diagram for the situation. Make sure you label each force and identify where it’s coming from.
Answer:
F - fr = ma , N - W = 0
Explanation:
In this exercise we are asked to identify the forces that act on the jack, for this we will use Newton's second law
On the x axis
We have two forces: the friction and the force of the girl who pulls the cat
F - fr = ma
On the y axis
There are two forces: normal and weight
N - W = 0
A diagram of these forces can be seen in the attachment
When the energy of a wave increases, what happens to the amplitude?
Answer:
The energy transported by a wave is directly proportional to the square of the amplitude. So whatever change occurs in the amplitude, the square of that effect impacts the energy. This means that a doubling of the amplitude results in a quadrupling of the energy.
Explanation:
When the energy of a wave increases, the amplitude also increases. This is because the amplitude of the wave is directly proportional to the energy of a wave.
What is the amplitude of a wave?The amplitude of a wave may be defined as the maximum displacement or distance moved by a point on a vibrating body or wave measured from its equilibrium position. It is equal to one-half the length of the vibration path.
It is the principle of physics that when the amplitude of the wave is higher, the energy also gets higher. To summarise, waves carry energy. The amount of energy they carry is related to their frequency and their amplitude. The higher the frequency, the more energy, and the higher the amplitude, the more energy.
Therefore, when the energy of a wave increases, the amplitude also increases. This is because the amplitude of the wave is directly proportional to the energy of a wave.
To learn more about Energy and amplitude, refer to the link:
https://brainly.com/question/19036728
#SPJ6
A 5.0kg concrete block accelerates down a 34 degree slope at 4.2 m/s^2. Find the Coefficient of friction between the block and the slope.
Answer:
The coefficient of friction between the block and the slope is 0.16.
Explanation:
We can find the coefficient of friction between the block and the slope by using Newton's second law:
[tex] \Sigma F = ma [/tex]
[tex]P_{x} -\mu N = ma[/tex]
[tex] mgsin(\theta) - \mu mgcos(\theta) = ma [/tex] (1)
Where:
m: is the mass of the block = 5.0 kg
a: is the acceleration = 4.2 m/s²
θ: is the angle = 34°
μ: is the coefficient of friction =?
g: is the gravity = 9.81 m/s²
By entering the above values into equation (1) we have:
[tex] gsin(\theta) - \mu gcos(\theta) = a [/tex]
[tex] \mu = \frac{gsin(\theta) - a}{gcos(\theta)} = \frac{9.81 m/s^{2}*sin(34) - 4.2 m/s^{2}}{9.81 m/s^{2}*cos(34)} = 0.16 [/tex]
Therefore, the coefficient of friction between the block and the slope is 0.16.
I hope it helps you!
Radio stations broadcast signals on two different frequency bands. These are called
Answer:
AM(amplitude modulation) and FM(frequency modulation)
Explanation:
A radio frequency band is a small adjacent section of the radio spectrum frequencies, whereby channels are usually used or set aside to be used.
They are usually of two different bands called AM which is known as amplitude modulation and FM which is known as frequency modulation
I need help on this, please tell me what it is.
Answer:
maria is right.
Explanation:
A generator converts mechanical energy to electrical energy by using a conducting metal loop turning in a...
A. magnetic field
B. Gravitational field
C. Steel sphere
D. Cooper sphere
Answer:
B- Gravitational Field
Explanation:
Have a nice day, hope you get a good grade!
The generator converts mechanical energy to electrical energy by using a conducting metal loop turning in a gravitational field.
What is the gravitational field?In terms of physics, a gravitational field represent the model that should be used for explaining the impact where the massive body should be extended into the space around it. Also, generating the force on the another massive body.
Therefore, based on the above explanation, the correct option is b.
Learn more about energy here: https://brainly.com/question/18167856
NEED HELP IS THERE SOMEONE CAN HELP ME PLS :)
please help!!! give me a summary on why human population is either good or bad!! thank youu
The image below shows a model of the atom which subatomic particle does the arrow in the image below identify ?
Answer:it’s a
Explanation:
Answer:
A electrons
Explanation:
bcs
Which TWO correctly relate the attraction between the particles of a liquid and the temperature at which the liquid changes state?
A. Strong attractions mean the liquid melts at a higher temperature
B. Strong attractions mean the liquid melts at a lower temperature
C. Strong attractions mean the liquid boils at a higher temperature
D. Strong attractions mean the liquid boils at a lower temperature
Answer:
a &c
Explanation:
>3
Attraction between the molecules of a liquid and the temperature at which the liquid changes state is "Strong attractions mean the liquid boils at a higher temperature". The correct option is C
What is Temperature ?Temperature is a physical quantity which measures hotness and coldness of a body. Temperature measures the degree of vibration of molecule in a body. Temperature is measured in centigrade (°C), Fahrenheit (°F) and Kelvin (K) in which Kelvin (K) is a SI unit of temperature. Absolute scale of temperature means Kelvin scale of temperature.
relation between Kelvin(K) and centigrade (°C),
°C= K - 273.15
from equation, 273.15 K means 0 °C, which is freezing point of water (ice).
when we give temperature to the body, its molecule or atom absorbs thermal energy and vibrate about their mean position. Amplitude of vibration get increases as we go on increasing temperature and for higher temperature force of attraction between molecules gets weaker. Hence for higher temperature, due to weaken the force of attraction between molecule, solid goes into liquid state. and further increase in temperature liquid goes into gaseous state.
Liquid has stronger force of attraction than gas and weaker than solid. Strong force of attraction means high temperature should be given to break molecular bonds. Therefore Strong attractions mean the liquid boils at a higher temperature.
Hence option C is correct.
To know more about force of attraction, click :
https://brainly.com/question/6958773
#SPJ3
What tool of dream analysis says that feelings and urges are hidden inside an event? condensation symbolism projection displacement
Answer:
Condensation
Explanation:
Answer:
Condensation! Hope this helps!!!
Explanation:
Knowing Newton’s 2nd Law, how would you rearrange it to solve for acceleration.
Answer:
Force / mass
Explanation:
Divide mass on both sides to get acceleration by itself leaving you with mass below force hence divide force by mass
What are greenhouse gases? Can you name any?
What is the mass of an object that has an acceleration of 2.63 m/s^2 when an unbalanced force of 112 N is applied to it?
Device A has a current of 0.4 A and a resistance of 3 Ω. Device B has a current of 0.6 A and a resistance of 3Ω. Which device would be more energy efficient?
Your answer would be Device A.
Answer:
Device A because it would use more voltage :D
Explanation:
Please help me! Yes, I know the quality SUCKS I have an old Android lol
Answer:
top to 2\
next to top
then to up one
next to up
Explanation:
8. An example of muscular endurance is:
A. Sit and Reach
B. Push Up
C. 100 meter sprint
D. None Of The Above
A baseball player’s bat applies an average force of 220. newtons to a tennis ball for 0.03 second. The average force exerted on the racket by the tennis ball is
Answer:
98
Explanation:
Can you hear sounds from space or not? Why or Why not?
A fire is burning in a fireplace. Where is the radiation?
A. You touch warm bricks next to the fireplace
B. You can feel the heat from across the room
C. Heat is rising up from the chimney
What is one physical benefit that can be obtained from participating in field events?
A) strengthen balance
B) better sleep pattern
C) increase capacity for learning
D) all of the above
Answer:
D
Explanation:
It does all three
Name all errors and type it again
EZ POINTS CMON
Answer:
you need to capitalize
Explanation:
When Grandpa Joe comes to visit, he tells us stories about when he was in the army with Colonel Jack S. Anderson.
A bullet is fired straight up from ground level for a distance of 1688.3m at a speed of 182 m/s. How long does it take for the bullet to stop?
Is a mirror reflective?
Answer:
A mirror is an image reflecting an object.
Explanation:
yes a mirror is reflective
A mirror is a reflector of the wave. When light waves reflect the flat surface of a mirror, the same curvature and vergence are retained, in equal but opposite direction, by these waves as by the original waves.Coating a piece of glass on one side with glistening metals can convert the glass into a mirror that mirrors light. Window glass may reflect only 8% of the light, while mirrors can display 95% of the light. The glass in a mirror is generally covered in a silver or aluminum layer. dark material is placed on the back to prevent the tearing of the metal (reacting with the air and turning dull). The other side of the glass can be a mirror or a simple glass. This can be used to make windows easily visible, but difficult to view.Answer:
Explanation:
Yes, a mirror is reflective to light. But there are electro magnetic waves of different frequency like radio wave that a mirror is not reflective.