Answer:
c) two different elements
Explanation:
A periodic table can be defined as the standard arrangement of chemical elements by atomic number, electronic configuration and chemical properties in a tabular form.
Generally, a proper representation of the mass number and atomic number of chemical elements is key and very important in chemistry.
Furthermore, as a rule, it should be noted that the mass number (nucleon number) is always larger than the atomic number(number of proton).
In the periodic table, all chemical elements are identified based on number of protons because it represents the atomic number.
This ultimately implies that, numbers of protons (atomic numbers) is used to differentiate an atom of one chemical element from the atom of another chemical element.
Hence, two atoms with different numbers of protons are two different elements.
For example, Hydrogen has one proton while Oxygen has 8 protons.
If a 2,000-kilogram car accelerates at a rate of 3 meters per second squared,
what is the force the engine applied to the car?
HELP
Answer:
Explanation:
assuming there is no friction
fnet=ma
2,000 kg*3m/s=6,000 N
PLS HELPPP ASAP
According to the Periodic Table of Elements, the neutral atom of what element has 4
protons, 5 neutrons, and 4 electrons?
O A. beryllium
O B. boron
OC. fluorine
D. aluminum
Which of the activities below does NOT affect the water cycle
Hydroelectricity
Deforestation
Exercising
Greenhouse effect
Answer:
Exercising would not affect the water cycle.
2. How much force, in g cm / s2 , is exerted by a golf ball described in problem 1 striking a tree while accelerating at 20 cm / s2 ? Show how you can solve this problem without knowing that F = m a. Explain your solution.
Answer:
F = 1000 g cm/s²
Explanation:
Let the weight of 1 ball is 50 gram
Acceleration, a = 20 cm/s²
We need to find the force exerted by a golf ball. We know that,
F = ma
So,
F = 50 g × 20 cm/s²
F = 1000 g cm/s²
So, the required force is 1000 g cm/s².
Balance the following equation..
Answer:
CH4+4Cl2=CCl4+4HCI
Explanation:
It's been a while since i've done one of these, but I believe this is right. Hope this helps!
Is the process represented below an example of a physical or a chemical
change?
CO2(s) —» CO2(g)
6 grams of sodium chloride (NaCl) is dissolved to create 0.5 L of solution. What is the
molarity of this solution?
Answer:
0.206M
Explanation:
Molarity, which refers to the molar concentration of a substance can be calculated using the formula as follows:
Molarity (M) = number of moles (n) ÷ volume (V)
According to the provided information, mass = 6grams, volume = 0.5L
Since molar mass of NaCl = 23 + 35.5
= 58.5g/lol
Mole = mass/molar mass
Mole = 6/58.5
Mole = 0.103mol
Hence;
Molarity = 0.103/0.5
Molarity = 0.206M
How can scientists control the flammability of a substance?
Answer: This is simple, if it has a high flammability, and you light it on fire, then that would be a chemical change.
Explanation:
May i have brainliest please and don't forget to drop a heart
If an object has a Mass of 11g and a volume fo 13mil, what is its density?
A.143g/ml
B.0.85g/ml
C.2g/ml D.24g/ml
Answer:
[tex]\boxed {\boxed {\sf B. \ d \approx 0.85 \ g/mL}}[/tex]
Explanation:
Density is found by dividing the mass by the volume.
[tex]d=\frac{m}{v}[/tex]
The mass of the object is 11 grams and the volume is 13 milliliters.
[tex]m= 11 \ g \\v= 13 \ mL[/tex]
Substitute the values into the formula.
[tex]d= \frac{11 \ g}{13 \ mL}[/tex]
Divide.
[tex]d=0.846153846 \ g/mL[/tex]
Round to the nearest hundredth. The 6 in the thousandth place tells us to round the 4 to a 5.
[tex]d \approx 0.85 \ g/mL[/tex]
The density is about 0.85 grams per milliliter.
Which of the following correctly describes the difference (on average) between an electron in a 2s orbital and an electron in a 3s orbital?
Answer:
C: electrons is the 3s orbital are higher than those in the 2s orbital
Explanation:
Looking at the options, the correct one is that the electrons in the 3s orbital will possess more energy than those in the 2s orbital. This is because the the 2s orbitals will be filled with electrons first before the 3s orbital.
Also from basics we know that the energy of an orbital increases as the quantum number increases.
HELP ASAP!!!
Which of the following is a function of the cell membrane?
Producing energy
Creating new cells
Eliminating of waste
Replacing damaged cells
Explain how mass extinctions occur.
Answer:
Mass extinctions happen because of climate change, asteroid impacts, massive volcanic eruptions or a combination of these causes.
Explanation:
select three of the following compounds that are ionic
Explanation:
Ionic compounds are compounds formed by the bonding of a metal with a non metal.
A. NO2
This is not an ionic compound because N and O are non metals.
B. CaCl2
This is an ionic compound because Ca is a metal and Cl is a non metal.
C. KI
This is an ionic compound because K is a metal and I is a non metal.
D. CO2
This is not an ionic compound because C and O are non metals.
E. H2O
This is not an ionic compound because H and O are non metals.
F. NaCl
This is an ionic compound because Na is a metal and Cl is a non metal.
In a 63.17 g sample of SOs, how many grams are sulfur?
Answer:
25.30 gram
Explanation:
No of moles = given mass / molar mass
No of moles = 63.17/80.06
0.7890 moles
Mass of sulphar = no of moles× molar mass of sulphar
Mass of sulphur = 0.7890×32.065
25.30 gram
X
What period are
the elements
that have an
outer layer O in?
Answer:
carbon
Explanation:
second (n = 2) shell, more specifically its 2s and 2p subshells.
Determine el número de moles presentes en una esfera de titaniode 0.5 cm de radio, sabiendo que la densidad del titanio es de 4507kg/m³. =433
Answer:
0.0493 moles de Titanio
Explanation:
Primero, debemos hallar el volumen de la esfera. Usando la densidad podemos hallar la masa de titanio y usando la masa atómica encontraremos las moles de titanio:
Volumen de la esfera:
Volumen esfera = 4/3π * Radio³
Volumen = 0.5236cm³
En m³ (1m³ = 1x10⁶cm³):
0.5236cm³ * (1m³ / 1x10⁶cm³) = 5.36x10⁻⁷m³
Masa en gramos:
5.36x10⁻⁷m³ * (4507kg / m³) = 2.36x10⁻³kg * (1000g / 1kg) = 2.36g de Titanio
Moles -Masa molar Ti: 47.867g/mol-:
2.36g de Titanio * (1mol / 47.867g) =
0.0493 moles de TitanioWhat are the end products of anaerobic respiration in yeast cell ?
Answer:
glucose ethanol and co2
please follow me and mark it brainliest
Answer:
In anaerobic respiration yeast breaks down glucose, forming ethanol and carbon dioxide as its waste products. When the glucose is nearly used up, and provided that oxygen is present, yeast uses the ethanol as a respiratory substrate to produce carbon dioxide and water in aerobic respiration.
Explanation:
Hope it is helpful....
A protein is a polymer that is made of
Answer:
A protein is a polymer that is made of amino acids.
For the reaction
? P4+? S8 - ? P4S10
what is the maximum amount of P4S10 which
could be formed from 15.29 g of P4 and 17.66 g
of Sg?
Answer in units of g.
Please hurry it’s due today and include the steps if you can
6.
A crystal of the purple compound potassium manganate (VII) is placed at the bottom
of a beaker of water and the beaker left until there
is no further change. What will be
observed?
A a uniformly purple solution.
B
a purple layer below a colourless layer.
С a colourless layer below a purple layer.
D a deep purple layer below a pale purple layer.
Sec 3/KPT and SMS/2021
Page 2 of 3
Answer:
I don't know
Explanation:
sorry i just need point to ask so i have comment
The formula of methane is CH4. The symbols for the two elements in methane are C and H. Give the names of these two elements.
Answer:
Carbon and Hydrogen
Explanation:
So the C stands for Carbon and H is for Hydrogen. Methane (CH4) is made up of one atom of Carbon and 4 atoms of Hydrogen.
Hope this helps
a = 10 m/s - 5 m/s
5S
Answer:
what is the formula?
Explanation:
Which of the following is the most accurate description of chemical energy? A. The energy released by heat in a chemical reaction B. The energy in the motion of the substance C. The energy stored in the chemical bonds of a substance D. The energy that is absorbed in a chemical reaction
Answer:
The answer is A The energy released by heat in a chemical reaction
Explanation:
Which organism in the food chain is
responsible for transforming radiant
energy into chemical energy?
Grass->Prairie Dog -> Coyote -> Soil Bacteria
Answer:
The organism in the food chain responsible for transforming radiant energy into chemical energy is;
Grass
Explanation:
Radiant energy is the energy present in electromagnetic waves which carry photons that may be considered as energy packets. It is an energy present in the Sunlight, which is an electromagnetic waves, and it is the energy in the electromagnetic waves that plants convert to chemical energy for food in the process known as photosynthesis as follows;
6CO₂ + H₂O + Radiant energy → C₆H₁₂O₆ + 6O₂
Therefore the organism in the food chain responsible for transforming radiant energy into chemical energy is the plant, grass
Give the boiling point elevation for the following: 150 grams of H2SO4 dissolved in 2.5 kg of H2O (i=2)
Answer: b
Explanation:
When white light passes through a prism, what can be discovered?
A)
White light is made invisible by passing through prisms.
B)
White light is made brighter by passing through prisms.
White light is made of a spectrum of various colors.
D)
White light gets hotter when it passes through prisms.
Answer:
White light is made of a spectrum of various colors.
Explanation:
As light passes through a prism, it is bent, or refracted, by the angles and plane faces of the prism and each wavelength of light is refracted by a slightly different amount. ... As a result, all of the colors in the white light of the sun separate into the individual bands of color characteristic of a rainbow.
Which characteristic of living organisms is described by the following definition? "The ability
to detect changes in the environment and make responses".
1. nutrition
2. sensitivity
3.movement
excretions
Answer:
it's sensitivity
Explanation:
because it's the action of sensing and reacting to something
also it was process of elimination
What Classification type star this?
Explanation:
The Sun is a as a G2V type star, a yellow dwarf and a main sequence star. Stars are classified by their spectra (the elements that they absorb) and their temperature.
whish this helped!
Jay painted the inner four walls of a box. Then he put an ice block into it such that it did not touch the walls, but he couldn't do the same when he put water in that box. Why?
Answer:
Liquid takes the shape of container, so it will always touch the walls of the box in which you put it.
Explanation:
We know that a solid has a definite shape and a definite volume hence it occupies only its own volume in the box, it does not touch the walls of the box.
However, a liquid does not have a definite shape and volume. It occupies the volume of the box. Therefore, the liquid water must definitely touch the walls of the box.
If 11.87 grams of sand (SiO2) were contained in the mixture, how many atoms of oxygen were in the mixture?
Answer:
2.38x10²³ atoms oxygen
Explanation:
To solve this question we need to convert the mass of sand to moles using its molar mass (Molar mass SiO₂ = 60.08g/mol). Twice these moles are the moles of Oxygen and using Avogadro's number we can find the amount of atoms of Oxygen in the mixture:
Moles SiO₂:
11.87g * (1mol / 60.08g) = 0.1976moles SiO₂
Moles Oxygen:
0.1976moles SiO₂* 2 = 0.3951moles oxygen
Atoms oxygen:
0.3951moles oxygen * (6.022x10²³atoms / 1mol O₂) =
2.38x10²³ atoms oxygen