Two airplanes are flying in the sky in such a way that the gravitational attractions between them decreases. The planes must be flying:
A.
away from each other.
B.
next to each other at the same speed.
C.
towards each other.
D.
faster than the speed of sound.

Answer:

The answer is C

Explanation:

The more space the molecules have the faster they will move, solid doesn't allow movement at all, when it gets to liquid they are free to move around because it's more space, when a gas they can move all around in the air.

Answer:

methyl ethanoate

Explanation:

To name the compound given above, the following must be obtained:

1. Determine the functional group of the compound.

In this case, the functional group is R–COOR' where R and R' are alkyl groups. Thus, the compound is an ester.

2. Determine the longest chain before the functional group and the compound after the functional group.

In this case, the longest chain before the functional group is carbon 2 i.e ethane and the compound after the functional group is methyl.

3. Name the compound by naming the compound after the functional group first, followed by the compound before the functional group and ending it with –oate.

This is illustrated below:

After the functional group => methyl

Before the functional group => ethane

Name of the compound => methyl ethanoate

Answer:

Following are the solution to the given choice:

Explanation:

Hex-2-yne is just not alkyne symmetric, therefore two things respectively hexan-3-one and hexan-2-one are to be given.

The attached file it displayed the response along with the mechanism, please find the.

Answer:100

Explanation:

Answer:

0.960 mol of Ag

Explanation:

Mg(s) + 2AgNO3(aq) → Mg(NO3)2(aq) + 2Ag(s)

1.00 mol of Mg ---- 2.00 mol of Ag

0.480 mol of Mg ---- x

x = (0.480×2)/1 = 0.960 mol of Ag

Answer:

sorry don't know the answer!!!

Answer:

B. Most energy comes from non-renewable sources

Explanation:

A P E X

In United States Most energy comes from non-renewable energy sources, as petroleum  coal and others has the highest consumption in the given chart

In the given chart, the energy consumption in US is based on Petroleum, coal and others  the highest consumption pattern as compared to other energy sources

Hence, most energy in the US is from non-renewable energy sources

Learn about renewable energy sources.

https://brainly.com/question/4038933

#SPJ2

Answer:

Boiling - The process of a liquid changing to gas.

Boiling point - The temperature at which a liquid boils.

Condensing - The process of a gas changing to a liquid.

Distillate - The liquid collect from the condenser.

Residue - The liquid left behind in the distillation flask.

Vapour - Another name for gas.

Hope it helps :)

Answer:

Option A. The specific heat is 0.897 J/gºC, The Substance is aluminum.

Explanation:

We'll begin by calculating the change in temperature of the substance. This can be obtained as follow:

Initial temperature (T₁) = 20.0 °C

Final temperature (T₂) = 40.0 °C

Change in temperature (ΔT) =?

ΔT = T₂ – T₁

ΔT = 40 – 20

ΔT = 20 °C

Finally, we shall determine the specific heat capacity of the substance. This can be obtained as follow:

Mass (M) = 136 g

Change in temperature (ΔT) = 20 °C

Heat (Q) absorbed = 2440 J

Specific heat capacity (C) =?

Q = MCΔT

2440 = 136 × C × 20

2440 = 2720 × C

Divide both side by 2720

C = 2440 / 2720

C = 0.897 J/gºC

Comparing the specific heat capacity (i.e 0.897 J/gºC) of the substance with those in the table above, the substance is Aluminum.

Thus, option A gives the correct answer to the question.

Answer:

(a): The expression of equilibrium constant is [tex]K_{eq}=\frac{[NO]^2}{[N_2][O_2]}[/tex]

(b): The equation to solve the concentration of NO is [tex][NO]=\sqrt{K_{eq}\times [N_2]\times [O_2]}[/tex]

(c): The concentration of NO is 0.0017 M.

Explanation:

The equilibrium constant is defined as the ratio of the concentration of products to the concentration of reactants raised to the power of the stoichiometric coefficient of each. It is represented by the term [tex]K_{eq}[/tex]

(a):

The given chemical equation follows:

[tex]N_2+O_2\rightarrow 2NO[/tex]

The expression for equilbrium constant will be:

[tex]K_{eq}=\frac{[NO]^2}{[N_2][O_2]}[/tex]

(b):

The equation to solve the concentration of NO follows:

[tex][NO]=\sqrt{K_{eq}\times [N_2]\times [O_2]}[/tex]            ......(1)

(c):

Given values:

[tex]K_{eq}=1.2\times 10^{-4}[/tex]

[tex][N_2]_{eq}=0.166M[/tex]

[tex][O_2]_{eq}=0.145M[/tex]

Plugging values in equation 1, we get:

[tex][NO]=\sqrt{(1.2\times 10^{-4})\times 0.166\times 0.145}[/tex]

[tex][NO]=\sqrt{2.88\times 10^{-6}}[/tex]

[tex][NO]=0.0017 M[/tex]

Hence, the concentration of NO is 0.0017 M.

Answer:

chlorous acid

Explanation:

The acidic equilibrium of weak acids, HX, occurs as follows:

HX ⇄ H+ + X-

Where Ka is written as:

Ka = [H+] [X-] / [HX]

The strongest acid is the acid that produce more H+. The acid with the higher Ka is the acid that produce more [H+] and is, thus, the strongest acid.

The higher Ka is the Ka of chlorus acid = 1.2x10-2

Right answer is:

Answer:

chlorous acid :)

Explanation:

Answer:

823.7g

Explanation:

Using the formula as follows:

Q = m × c × ∆T

Where;

Q = amount of heat (J)

m = mass of substance (g)

c = specific heat capacity (J/g°C)

∆T = change in temperature (°C)

Using the information given in this question as follows:

Q = 6,400 J

m = ?

c of soil = 0.840 J/g°C

∆T = 9.25°C

Using Q = mc∆T

m = Q ÷ c∆T

m = 6,400 ÷ (0.840 × 9.25)

m = 6400 ÷ 7.77

m = 823.7g

Answer:

There are 823.68 grams.

Explanation:

Calorimetry is responsible for measuring the amount of heat generated or lost in certain physical or chemical processes.

Between heat and temperature there is a relationship of direct proportionality. The constant of proportionality depends on the substance that constitutes the body and its mass, and is the product of the specific heat by the mass of the body. In summary, the amount of heat Q that receives or transmits a mass m of a substance with specific heat C to raise its temperature from T1 to T2 is given by the formula:

Q= C*m* (T2- T1) = C*m* ΔT

In this case:

Replacing:

6400J= 0.840 [tex]\frac{J}{g*C}[/tex] *m* 9.25 C

Solving:

[tex]m=\frac{6400 J}{0.840 \frac{J}{g*C} *9.25 C}[/tex]

m=823.68 grams

There are 823.68 grams.

Answer:

1. Ferric sulfate - Fe2(SO4)3

2. Strontium oxalate – SrC2O4

3. Chromic acid – CrO3

4. Nickel (III) carbonate – NiCO3

5. Silver bromate – AgBrO3

6. Dinitrogen difluoride - N2H2

7. Magnesium molybdate – MgMoO4

8. Sodium hydrogen phosphate - Na2PO4

Answer:

Q = 669.44 J

Explanation:

Given that,

Mass of water, m = 32 g

The temperature change from 25.0°C to 20.0°C.

We need to find the amount of heat energy transferred. Let it is Q. We know that,

[tex]Q=mc\Delta T[/tex]

Where

c is the specific heat of water

Put all the values,

[tex]Q=32\times 4.184 \times (20-25)\\Q=669.44\ J[/tex]

So, 669.44 J of heat energy is transferred from the water.

Atoms of the same elements differing in the number of neutrons in their nuclei are known as isotopes. Thus, isotopes of an element have the same atomic number but different atomic mass number. Isotopes of an element have similar chemical properties but different physical properties.

Answer:

1.3 × 10² g

Explanation:

Step 1: Given data

Moles of oxygen: 4.0 mol

Step 2: Calculate the mass corresponding to 4.0 moles of oxygen

For a given chemical reaction, we need 4.0 moles of oxygen and we want to find what mass in grams it represents. To convert moles to mass, we need a conversion factor: the molar mass. The molar mass of oxygen is 32.00 g/mol.

4.0 mol × 32.00 g/mol = 1.3 × 10² g

Answer:

Explanation:

A chemical bond formed when two atoms share three pairs of electrons is a triple bond; it is best described as covalent.

To solve this we must be knowing each and every concept related to  chemical formula. Therefore, in the above given ways the chemical formula for the molecule can be written.

A chemical formula is a scientific notation that uses atomic symbol and numerical subscripts to represent the number and types of elements contained in a molecule. A chemical formula seems to be a concise written description of an existing three-dimensional molecule.

A chemical formula characterizes a material to the atomic level. There are three sorts of chemical formulas: empirical, molecular, and structural.

The chemical formula for the given molecules are:

2. H[tex]_2[/tex]O

3. O[tex]_3[/tex]

4. H[tex]_2[/tex]

5. CO[tex]_2[/tex]

6. CO

7. NO[tex]_2[/tex]

8. CH[tex]_4[/tex]

Therefore, in the above given ways the chemical formula for the molecule can be written.

To know more about chemical formula, here:

https://brainly.com/question/29031056

#SPJ2

Answer:

option number 4. 'coral'

Explanation:

-

the equation is not present.

Answer:

Your answer will be b(molten material from the outer core makes its way to the surface of earth)

Explanation:

Answer:

C

Explanation:

I'm pretty sure molten material comes from the inner core. I think you can search up this though, try to find where molten material comes from. Goodluck!

Answer:

Answer C

Explanation:

Got it off of q**zlet ;)

Answer

Its C confirmed

Explanation:

Just did the test

Answer:

At the cathode during the electrolysis of an aqueous solution of magnesium iodide, MgI2 , 2I−(aq) is produced

Explanation:

At cathode, reduction reaction takes place.

The dissociation of MgI2 in aqueous solution is Mg2+(aq) and 2I−(aq)

Here, the Iodine reduces to 2I−(aq) from state of 0 (MgI2) to state of -1 (2I−(aq))

Hence, at the cathode during the electrolysis of an aqueous solution of magnesium iodide, MgI2 , 2I−(aq) is produced

Answer:

During electrolysis of an aqueous solution of magnesium iodide, MgI2 , 2I−(aq) is produced at the cathode

Explanation:

Electrolysis is a process whereby ionic compound is broken down or degraded into smaller substances when electric current flow through it.

During electrolysis of magnesium iodide, At the cathode reduction reaction occur .

MgI2 is dissociated to is Mg2+(aq) and 2I−(aq)

Then Iodine is reduced to 2I−(aq) which is 0 in (MgI2) then change to -1 (2I−(aq))

Therefore;

During electrolysis of an aqueous solution of magnesium iodide, MgI2 , 2I−(aq) is produced at the cathode.

Answer:

Nitrogen molecule (N2)

The electronic configuration of nitrogen (Z=7) = 1s2 2s2 2px12py12pz1.

The total number of electrons present in the nitrogen molecule (N2) is 14.

In order to maximize energy, these 14 electrons can be accommodated in the different molecular orbitals.

N2: KK'(σ2s)2 (σ*2s)2 (π2Px)2 (π2py)2 (σ2pz)2

Here (σ1s)2 (σ*1s)2 part of the configuration is abbreviated as KK’, which denotes the K shells of the two atoms. In calculating bond order, we can ignore KK’, as it includes two bonding and two antibonding electrons.

The bond order of N2can be calculated as follows:

Here, Nb = 10 and Na = 4

Bond order = (Nb−Na) /2

B.O = (10−4)/2

B.O = 3

So your answer should be C3.

Answer:

B. Dividing the number by 1,000

Explanation:

Every time you move the decimal ,add a zero.Since the decimal is moved three times ,there are three zeroes. When you move left ,the number is getting smaller so it is division.

Answer:

1.20 × 10³ torr

Explanation:

Step 1: Given data

Step 2: Calculate the final pressure of the gas

Considering the constant volume, if we assume the gas behaves ideally, we can calculate its final pressure using Gay-Lussac's law.

P₁/T₁ = P₂/T₂

P₂ = P₁ × T₂/T₁

P₂ = 822 torr × 475 K/325 K = 1.20 × 10³ torr

Answer: D it’s is 2.0 s

i think..

Explanation:

Answer:

O2

Explanation:

for find the limiting reactant you must calculate the moles of the reactants from the amount that you have and from the MM:

MM FeS2 = 120n  = 26.2g / 120g/mol = 0,218 mol

MM O2  = 32n = 5,44g/32g/mol = 0,17 mol

The limiting reactant is  

O2