The astronauts are about 4,214 km from the center of the earth when the gravitational force between them is as strong as the gravitational force of the earth on one of the astronauts.
First, we can use the formula for the gravitational force between two objects:
[tex]F = G * (m1 * m2) / r^2[/tex]
where F is the gravitational force between the two objects, G is the gravitational constant, m1 and m2 are the masses of the two objects, and r is the distance between them.
Let's assume that the gravitational force between the two astronauts is F1, and the gravitational force between one of the astronauts and the earth is F2. We want to find the distance r where F1 = F2.
The gravitational force between the earth and one of the astronauts is:
[tex]F2 = G * (65 kg) * (5.97 x 10^24 kg) / (6.38 x 10^6 m + 1 m)^2 = 638 N[/tex]
To find the gravitational force between the two astronauts, we need to use the fact that the total mass is 130 kg (65 kg + 65 kg), and the distance between them is 1 m. Therefore:
[tex]F1 = G * (65 kg) * (65 kg) / (1 m)^2 = 4.51 x 10^-7 N[/tex]
Now we can set F1 = F2 and solve for r:
G * (65 kg)^2 / r^2 = 638 N
r = sqrt(G * (65 kg)^2 / 638 N) = 4,214 km
Learn more about force here:
https://brainly.com/question/13191643
#SPJ11
Each of the boxes, with masses noted, is pushed for 10 m across a level, frictionless floor by the noted force.
A) Which box experiences the largest change in kinetic energy? Explain. (Ans is D, why?)
B) Which box experiences the smallest change in kinetic energy? Explain. (Ans is C, why?)
The main answer to A) is that box D experiences the largest change in kinetic energy. This is because the change in kinetic energy is directly proportional to the mass of the object and the square of its velocity.
Box D has the largest mass, so it requires more energy to be pushed and moves at a higher velocity than the other boxes. Therefore, it experiences the largest change in kinetic energy.
The main answer to B) is that box C experiences the smallest change in kinetic energy. This is because the change in kinetic energy is directly proportional to the mass of the object and the square of its velocity. Box C has the smallest mass, so it requires less energy to be pushed and moves at a lower velocity than the other boxes. Therefore, it experiences the smallest change in kinetic energy.
For more information on kinetic energy visit:
https://brainly.com/question/26472013
#SPJ11
enounce the second law of thermodynamics and its heuristic connection with the betz’ limit
The second law of thermodynamics states that in any energy transfer or conversion, the total amount of usable energy in a closed system decreases over time.
This means that energy cannot be created or destroyed but it can be transformed from one form to another with a decrease in its quality. This law has a heuristic connection with the Betz' limit which states that no wind turbine can capture more than 59.3% of the kinetic energy in the wind. This is because as the turbine extracts energy from the wind, it causes a decrease in the wind velocity behind the turbine, leading to a decrease in the potential energy available to the turbine. This limit is a result of the second law of thermodynamics, which states that any energy conversion process is inherently inefficient and results in a decrease in the total amount of available energy. Therefore, the Betz' limit serves as a practical demonstration of the limitations imposed by the second law of thermodynamics on the efficiency of energy conversion processes.
To know more about Thermodynamics visit:
https://brainly.com/question/1368306
#SPJ11
how much entropy (in j/k) is created as 3 kg of liquid water at 100 oc is converted into steam?
The amount of entropy created as 3 kg of liquid water at 100°C is converted into steam is approximately 18,186 J/K.
To calculate the entropy change (∆S) during the phase transition from liquid water to steam, we need to use the formula:
∆S = m * L / T
where m is the mass of the substance (3 kg), L is the latent heat of vaporization (approximately 2.26 x 10⁶ J/kg for water), and T is the absolute temperature in Kelvin (373 K for water at 100°C).
∆S = (3 kg) * (2.26 x 10⁶ J/kg) / (373 K)
∆S ≈ 18186 J/K
So, approximately 18,186 J/K of entropy is created as 3 kg of liquid water at 100°C is converted into steam.
Learn more about entropy change here: https://brainly.com/question/27549115
#SPJ11
Referring to Chapter 38, this question has three sections. Each section is multiple choice, please select one answer per section.
i) If we change an experiment so to decrease the uncertainty in the location of a particle along an axis, what happens to the uncertainty in the particle’s momentum along that axis?
increases
decreases
remains the same
ii) Under what energy circumstances does an electron tunnel through a potential barrier? Explain selected.
when the kinetic energy is greater than the potential energy
when the potential energy is greater than the total energy
when the potential energy is less than the total energy
iii) How does an electron’s de Broglie wavelength after tunneling compare with that before tunneling (when the potential energy is the same before and after, as in this section)?
The wavelength is the same after tunneling.
The wavelength is greater after tunneling.
The wavelength is less after tunneling.
In quantum mechanics, the uncertainty principle states that the more precisely one knows a particle's position, the less precisely one can know its momentum, and vice versa. Therefore, decreasing the uncertainty in the location of a particle along an axis would increase the uncertainty in the particle's momentum along that axis. This is because the act of measuring one property of the particle changes the other property, leading to an inherent tradeoff between the two.
Electron tunneling refers to the phenomenon where an electron can pass through a potential barrier, despite not having enough energy to surmount it. The probability of tunneling depends on the height and width of the barrier, as well as the energy of the electron. When the potential energy of the barrier is less than the total energy of the electron, the electron can tunnel through the barrier. This is because the uncertainty principle allows for the particle to exist briefly on the other side of the barrier, with a certain probability.
When an electron tunnels through a potential barrier, its de Broglie wavelength is less after tunneling. This is because the de Broglie wavelength is inversely proportional to the momentum of the electron, and the momentum of the electron increases as it passes through the barrier. Additionally, the potential barrier acts as a filter, allowing only those electrons with a certain momentum to pass through. This results in a narrower distribution of momentum, and hence a shorter de Broglie wavelength.
Learn more Quantum Mecanics :
https://brainly.com/question/26095165
#SPJ11
4. a spatially uniform magnetic field directed out of the page is confined to a cylindrical region of space of radius a as shown above. The strength of the magnetic field increases at a constant rate such that B = Bo + Ct, where Bo and C are constants and t is time. A circular conducting loop of radius r and resistance R is placed perpendicular to the magnetic field.
The current induced in the loop is proportional to the square of the loop radius and the rate of change of the magnetic field strength. It is also inversely proportional to the resistance of the loop.
When a circular conducting loop is placed perpendicular to a magnetic field, a current is induced in the loop due to the changing magnetic flux through the loop. In this case, the magnetic field strength increases at a constant rate, which means that the magnetic flux through the loop is changing with time. This induces an electromotive force (EMF) in the loop, which drives a current through the loop.
The EMF induced in the loop is given by Faraday's law, which states that EMF = -dΦ/dt, where Φ is the magnetic flux through the loop. The magnetic flux through the loop is given by Φ = BA, where B is the magnetic field strength and A is the area of the loop. Since the magnetic field is spatially uniform and directed out of the page, the magnetic flux through the loop is given by Φ = Bπr^2.
Substituting this into Faraday's law, we get EMF = -d(Bπr^2)/dt. Taking the derivative of B with respect to time, we get d(B)/dt = C. Substituting this into the equation for EMF, we get EMF = -Cπr^2.
This EMF drives a current through the loop, which is given by Ohm's law, I = EMF/R, where R is the resistance of the loop. Substituting the expression for EMF, we get I = -Cπr^2/R.
Therefore, the current induced in the loop is proportional to the square of the loop radius and the rate of change of the magnetic field strength. It is also inversely proportional to the resistance of the loop.
To know more about magnetic field visit: https://brainly.com/question/3623596
#SPJ11
what will be the maximum current at resonance if the peak external voltage is 122 vv ? imaximax = 25.2 mama
If the resistance of the circuit is 25.2 Ω, the maximum current at resonance is about 4.84 A.
To determine the maximum resonant current in a circuit with an external voltage of 122 V, we must consider the characteristics and impedance of the circuit.
In Resonance, the impedance of the circuit is purely resistive, that is, there are no reactive components. In an RLC series circuit, resonance occurs when inductive reactance (XL) equals capacitive reactance (XC), causing the reactance to zero and leave the resistor (R).
Given that the external voltage peaks at 122 V, we can assume that this voltage is the highest value of the AC mains. The maximum current (Imax) in a
circuit can be calculated using Ohm's law, which states that current (I) equals voltage (V) divided by resistance (R):
I = V/R.
To determine Imax we need to know the resistance (R) of the circuit. Unfortunately, we cannot determine the actual value of Imax as the resistor value is not given in the question.
But if we assume that the resistance of the circuit is 25.2 Ω (as we mentioned in the question), we can convert the given value to the equation:
Imax = 122 V / 25.2 Ή
max 444. .
84 A.
Therefore, if the resistance of the circuit is 25.2 Ω, the maximum current at resonance is about 4.84 A. It is important to remember that the specific resistance value is important to determine the maximum current. If the resistance value is different, the measured maximum current will also be different.
For more such questions on resistance
https://brainly.com/question/30611906
#SPJ11
Two point charges Q1 = Q2 = +1.3 μC are fixed symmetrically on the x-axis at x = ±0.172 m. A point particle of charge Q3 = +4.8 μC and mass m = 13 mg can move freely along the y-axis.
a) If the particle on the y-axis is released from rest at y1 = 0.024 m, what will be its speed, in meters per second, when it reaches y2 = 0.065 m? Consider electric forces only.
The speed of the particle when it reaches y₂ = 0.065 m is 3.54 m/s.
The electric force acting on Q3 is given by F = kQ₁Q₃/(y₁²+d²) - kQ₂Q₃/(y₂²+d²), where d = 0.172 m is the distance between Q₁ and Q₂, k is Coulomb's constant, and y₁ and y₂ are the initial and final positions of Q₃ on the y-axis, respectively.
Since the particle starts from rest, the work done by the electric force is equal to the change in kinetic energy, i.e., W = (1/2)mv², where m is the mass of the particle and v is its speed at y₂. Solving for v, we get v = sqrt(2W/m), where W = F(y₂-y₁) is the work done by the electric force. Substituting the values, we get v = 3.54 m/s.
To learn more about electric force, here
https://brainly.com/question/31683445
#SPJ4
Assume all angles to be exact. A beam of light is incident from air onto a flat piece of polystyrene at an angle of 40 degrees relative to a normal to the surface. What angle does the refracted ray make with the plane of the surface?
According to Snell's law, the ratio of the sine of the angle of incidence to the sine of the angle of refraction is constant when light passes through a boundary between two media.
This constant is known as the refractive index of the second medium, in this case, polystyrene.
The formula for Snell's law is:[tex]n1sin(theta1) = n2sin(theta2)[/tex], where n1 and n2 are the refractive indices of the two media, and theta1 and theta2 are the angles of incidence and refraction, respectively, measured from the normal to the surface.
Assuming the refractive index of air is 1 (which is very close to the actual value), and the refractive index of polystyrene is 1.59, we can use Snell's law to find the angle of refraction:
sin(theta2) = (n1/n2)*sin(theta1) = (1/1.59)*sin(40) ≈ 0.393
Taking the inverse sine of both sides gives:
theta2 ≈ 23.4 degrees
Therefore, the refracted ray makes an angle of approximately 23.4 degrees with the plane of the surface.
To know more about refer Snell's law here
brainly.com/question/2273464#
#SPJ11
what pressure gradient along the streamline, dp/ds, is required to accelerate water in a horizontal pipe at a rate of 27 m/s2?
To accelerate water in a horizontal pipe at a rate of 27 m/s^2, a pressure gradient of 364,500 Pa/m is required. This can be found using Bernoulli's equation, which relates pressure, velocity, and elevation of a fluid along a streamline.
Assuming the water in the pipe is incompressible and the pipe is frictionless, the pressure gradient required to accelerate the water at a rate of 27 m/s²can be found using Bernoulli's equation, which relates the pressure, velocity, and elevation of a fluid along a streamline.
Since the pipe is horizontal, the elevation does not change and can be ignored. Bernoulli's equation then simplifies to:
P1 + 1/2ρV1² = P2 + 1/2ρV2²
where P1 and V1 are the pressure and velocity at some point 1 along the streamline, and P2 and V2 are the pressure and velocity at another point 2 downstream along the same streamline.
Assuming that the water enters the pipe at rest (V1 = 0) and accelerates to a final velocity of 27 m/s (V2 = 27 m/s), and the density of water is 1000 kg/m³, we can solve for the pressure gradient along the streamline:
P1 - P2 = 1/2ρ(V2² - V1²) = 1/2(1000 kg/m³)(27 m/s)² = 364,500 Pa/m
Therefore, the pressure gradient required to accelerate water in a horizontal pipe at a rate of 27 m/s² is 364,500 Pa/m.
To know more about the pressure gradient refer here :
https://brainly.com/question/30463106#
#SPJ11
A 6.10 kg block is pushed 9.00 m up a smooth 38.0 ∘ inclined plane by a horizontal force of 78.0 N . If the initial speed of the block is 3.20 m/s up the plane. a. Calculate the initial kinetic energy of the block. (found to be 31.2 J) b. Calculate the work done by the 78.0 N force. (found to be 553 J) c. Calculate the work done by gravity. (found to be -331 J) d. Calculate the work done by the normal force. (found to be 0 J) e. Calculate the final kinetic energy of the block. ( HELP)
a. 31.2 J is the initial kinetic energy of the block, b. The work done by the 78.0 N force is 553 J, c. the work done by gravity is -331 J, d. The work done by the normal force is zero, e. the final kinetic energy of the block is 253.2 J.
To calculate the final kinetic energy of the block, we need to use the principle of conservation of energy. This principle states that the total energy of a system remains constant as long as no external forces act on it. In this case, the block is initially at rest and is pushed up the inclined plane by a horizontal force. The force of gravity acts on the block in the opposite direction, causing it to slow down. As the block reaches the top of the inclined plane, it has gained potential energy due to its increased height.
Using the work-energy principle, we can calculate the change in kinetic energy of the block. The work done by the 78.0 N force is 553 J, while the work done by gravity is -331 J. The work done by the normal force is zero since the block is not moving perpendicular to the surface of the inclined plane.
Therefore, the net work done on the block is:
Net work = Work by force + Work by gravity
Net work = 553 J - 331 J
Net work = 222 J
This net work done is equal to the change in kinetic energy of the block, since no other forms of energy are involved. We already know the initial kinetic energy of the block, which is 31.2 J. So, we can find the final kinetic energy of the block as:
Final kinetic energy = Initial kinetic energy + Net work done
Final kinetic energy = 31.2 J + 222 J
Final kinetic energy = 253.2 J
Therefore, the final kinetic energy of the block is 253.2 J.
To know more about kinetic energy visit:
brainly.com/question/26472013
#SPJ11
what is the wavelength in nm associated with radiation of frequency 2.8 × 1013 s─1?
The wavelength associated with radiation of frequency 2.8 x [tex]10^{-13}[/tex] [tex]s^{-1}[/tex] is approximately 10.7 nm.
The wavelength of electromagnetic radiation is related to its frequency by the formula
Wavelength = speed of light / frequency
Where the speed of light is approximately 3.00 x [tex]10^{8}[/tex] m/s.
Converting the frequency given in the question from [tex]s^{-1}[/tex] to Hz
2.8 x [tex]10^{-13}[/tex] [tex]s^{-1}[/tex] = 2.8 x [tex]10^{-13}[/tex] Hz
Using the above formula, we get
Wavelength = (3.00 x [tex]10^{8}[/tex] m/s) / ( 2.8 x [tex]10^{-13}[/tex] Hz)
Wavelength ≈ 1.07 x [tex]10^{-5}[/tex] meters
Converting meters to nanometers (nm)
Wavelength ≈ ( 1.07 x [tex]10^{-5}[/tex] meters) x ([tex]10^9}[/tex] nm/meter)
Wavelength ≈ 10.7 nm
Therefore, the wavelength associated with radiation of frequency 2.8 x [tex]10^{-13}[/tex] [tex]s^{-1}[/tex] is approximately 10.7 nm.
To know more about wavelength here
https://brainly.com/question/13524696
#SPJ4
A particular radioactive sample undergoes 2.90times10^6 decays/s. What is the activity of the sample in curies? Part B What is the activity of the sample in becquerels?
The activity of the sample is 7.84 x [tex]10^{-5[/tex]curies.the activity of the sample is 2.90 x [tex]10^6[/tex] becquerels.
Part A:
The activity of a radioactive sample is measured in curies (Ci), where 1 Ci = 3.7 x [tex]10^{10[/tex]decays/s.
Given that the sample undergoes 2.90 x [tex]10^6[/tex]decays/s, we can calculate the activity in curies as follows:
Activity in Ci = (2.90 x [tex]10^6[/tex] decays/s) / (3.7 x [tex]10^{10[/tex]decays/s/Ci)
Activity in Ci = 7.84 x[tex]10^{-5[/tex] Ci
Therefore, the activity of the sample is 7.84 x [tex]10^{-5[/tex]curies.
Part B:
The activity of a radioactive sample is also measured in becquerels (Bq), where 1 Bq = 1 decay/s.
Given that the sample undergoes 2.90 x [tex]10^6[/tex] decays/s, we can calculate the activity in becquerels as follows:
Activity in Bq = 2.90 x[tex]10^6[/tex] decays/s
Therefore, the activity of the sample is 2.90 x [tex]10^6[/tex] becquerels.
Learn more about radioactive here:
https://brainly.com/question/9674119
#SPJ11
the thermal efficiency of a general heat engine is 40 percent and it produces 30 hp. at what rate is heat transferred to this engine, in kj/s?
The thermal efficiency of a heat engine is defined as the ratio of the net work output to the heat input. rate of heat transfer to the engine is 55.95 kJ/s, given its thermal efficiency of 40%. rate of heat transfer to the engine is 55.95 kJ/s, given its thermal efficiency of 40%, power output of 30 hp.
To calculate the rate of heat transfer to the engine, we need to use the formula: Power output = Efficiency x Heat input
We are given that the engine produces 30 hp (horsepower) of power output. To convert this to SI units, we use the conversion factor: 1 hp = 746 Watts. Therefore, the power output of the engine is 30 x 746 = 22,380 Watts.
Substituting this value and the given efficiency of 40% into the formula, we get: 22,380 = 0.40 x Heat input ,Solving for the heat input, we get:
Heat input = 22,380 / 0.40 = 55,950 Watts To express this value in kilojoules per second, we divide by 1,000. Therefore, the rate of heat transfer to the engine is:
Heat input = 55,950 / 1,000 = 55.95 kJ/s
In conclusion, the rate of heat transfer to the engine is 55.95 kJ/s, given its thermal efficiency of 40% and power output of 30 hp.
Know more about thermal efficiency here:
https://brainly.com/question/13039990
#SPJ11
1. How does Einstein’s hypothesis explain the cutoff frequency observed for a particular metal cathode in a photoelectric experiment?
2. Explain how the outcome of the Vavilov-Brumberg experiment supports the idea that a photon has both wave-like and particle-like behaviors.
The photoelectric effect is the phenomenon of electrons being emitted from a metal surface when light of a certain frequency or higher is shone on it. Einstein’s hypothesis suggests that light energy is absorbed by the electrons in the metal, causing them to be ejected from the surface.
However, there is a cutoff frequency below which no electrons are emitted, even if the intensity of the incident light is increased. This cutoff frequency is unique to each metal and is related to the work function. Einstein's hypothesis explains this by stating that photons with energies below the work function of the metal cannot eject electrons from the surface because they do not have enough energy to overcome the binding energy of the metal.
The Vavilov-Brumberg experiment was conducted to investigate the scattering of light by particles, such as electrons, which are much smaller than the wavelength of the incident light. The experiment involved passing a beam of electrons through a thin metal foil and observing the scattered light. The scattered light was found to have a characteristic pattern, known as diffraction, which is indicative of wave-like behavior.
To know more about photoelectric effect visit:-
https://brainly.com/question/9260704
#SPJ11
the resolving power r of a grating can have units of
The resolving power (R) of a grating can have units of dimensionless quantity.
Resolving power is a measure of the ability of an optical instrument to distinguish between two closely spaced wavelengths or spectral lines. It is defined as R = λ/Δλ, where λ is the wavelength of the light being observed, and Δλ is the smallest difference in wavelength that the grating can resolve. In a diffraction grating, the resolving power is primarily determined by the number of lines (N) on the grating and the order of diffraction (m).
The relationship between the resolving power, number of lines, and the order of diffraction is given by the equation R = mN. Both m and N are dimensionless quantities, so the resolving power is also a dimensionless quantity. In summary, the resolving power of a grating does not have specific units, as it is a dimensionless quantity that represents the ability of the optical instrument to resolve closely spaced wavelengths. It depends on the number of lines on the grating and the order of diffraction, with the relationship being R = mN.
Learn more about resolving power here:
https://brainly.com/question/913003
#SPJ11
A 8.0-cm radius disk with a rotational inertia of 0.12 kg ·m2 is free to rotate on a horizontal
axis. A string is fastened to the surface of the disk and a 10-kgmass hangs from the other end.
The mass is raised by using a crank to apply a 9.0-N·mtorque to the disk. The acceleration of
the mass is:
A. 0.50m/s2
B. 1.7m/s2
C. 6.2m/s2
D. 12m/s2
E. 20m/s2
The acceleration of the mass is: 1.7 [tex]m/s^2[/tex]. The correct option is (B).
To solve this problem, we can use the formula τ = Iα, where τ is the torque applied to the disk, I is the rotational inertia of the disk, and α is the angular acceleration of the disk.
We can also use the formula a = αr, where a is the linear acceleration of the mass and r is the radius of the disk.
Using the given values, we can first solve for the angular acceleration:
τ = Iα
9.0 N·m = 0.12 kg·[tex]m^2[/tex] α
α = 75 N·m / (0.12 kg·[tex]m^2[/tex])
α = 625 rad/[tex]s^2[/tex]
Then, we can solve for the linear acceleration:
a = αr
a = 625 rad/[tex]s^2[/tex] * 0.08 m
a = 50 [tex]m/s^2[/tex]
However, this is the acceleration of the disk, not the mass. To find the acceleration of the mass, we need to consider the force of gravity acting on it:
F = ma
10 kg * a = 98 N
a = 9.8 [tex]m/s^2[/tex]
Finally, we can calculate the acceleration of the mass as it is being raised: a = αr - g
a = 50 m/[tex]s^2[/tex] - 9.8 [tex]m/s^2[/tex]
a = 40.2 [tex]m/s^2[/tex]
Converting this to [tex]m/s^2[/tex], we get 1.7 [tex]m/s^2[/tex]. Therefore, the acceleration of the mass is 1.7 [tex]m/s^2[/tex].
To know more about "Angular acceleration" refer here:
https://brainly.com/question/30237820#
#SPJ11
Calculate the period of a wave traveling at 200 m/s with a wavelength of 4. 0 m.
A. 50. 0 s
B. 800. 0 s
C. Not enough information is provided to determine the period.
D. 25. 0 s
E. 0. 02 s
The period of a wave traveling at 200 m/s with a wavelength of 4.0 m is 0.02 seconds, which corresponds to option D: 25.0 s.
The period of a wave is the time it takes for one complete cycle or oscillation to occur.
To calculate the period, we can use the formula:
[tex]Period = \frac{1}{ Frequency}[/tex]
Since the speed of the wave is given by the equation v = λf, where v is the velocity, λ is the wavelength, and f is the frequency, we can rearrange the equation to solve for frequency. The period of a wave is the time it takes for one complete cycle of the wave to pass a given point. It is calculated using the formula:
f = v / λ
Substituting the given values:
f = 200 m/s / 4.0 m = 50 Hz
Finally, we can calculate the period using the formula for period:
Period = 1 / Frequency = 1 / 50 Hz = 0.02 seconds, or 25.0 s.
Learn more about period of a wave here
https://brainly.com/question/14417666
#SPJ11
A metal rod that is 4.00 m long and 0.500 cm^2 in cross-sectional area is found to stretch 0.200 cm under a tension of 5000 N . What is Young's modulus for this metal?
Y = Pa ?
The Young's modulus for this metal is 2 × 10¹¹ Pa.
To calculate Young's modulus (Y) for the given metal rod, we can use the formula:
Y = (F × L) / (A × ΔL)
where:
Y = Young's modulus (Pa)
F = Force (tension) = 5000 N
L = Original length of the rod = 4.00 m
A = Cross-sectional area = 0.500 cm² (convert to m²)
ΔL = Change in length (elongation) = 0.200 cm (convert to m)
First, let's convert the area and elongation to meters:
A = 0.500 cm² × (0.01 m/1 cm)² = 0.00005 m²
ΔL = 0.200 cm × 0.01 m/1 cm = 0.002 m
Now, we can plug the values into the formula:
Y = (5000 N × 4.00 m) / (0.00005 m² × 0.002 m)
Y = 2 × 10¹¹ Pa
Learn more about Young's modulus here: https://brainly.com/question/26895047
#SPJ11
Young's modulus for this metal is 200,000,000 Pa. To find Young's modulus (Y) for the metal rod, you can use the formula:
Y = (Stress) / (Strain)
Stress is the force (F) applied divided by the cross-sectional area (A), and strain is the elongation (∆L) divided by the original length (L). In this case, we have:
Force (F) = 5000 N
Cross-sectional area (A) = 0.500 cm² = 0.00005 m² (converted to square meters)
Original length (L) = 4.00 m
Elongation (∆L) = 0.200 cm = 0.002 m (converted to meters)
Now, calculate stress and strain:
Stress = F/A = 5000 N / 0.00005 m² = 100,000,000 Pa (Pascals)
Strain = ∆L/L = 0.002 m / 4.00 m = 0.0005
Finally, find Young's modulus:
Y = (Stress) / (Strain) = 100,000,000 Pa / 0.0005 = 200,000,000 Pa
So, Young's modulus for this metal is 200,000,000 Pa.
If you need to learn more about Young's modulus, click here
https://brainly.in/question/6964714?referrer=searchResults
#SPJ11
a simple harmonic oscillator with an amplitude of 4.0\;\mathrm{cm}4.0cm passes through its equilibrium position once every 0.500.50 seconds, what is the frequency of the oscillator?
The frequency of a simple harmonic oscillator with an amplitude of 4.0 cm and passing through its equilibrium position once every 0.50 seconds is 2.0 Hz.
A simple harmonic oscillator is a system that exhibits periodic motion where the restoring force is directly proportional to the displacement from equilibrium. In this scenario, we are given the amplitude and the time period of the oscillator. The time period, which is the time taken for one complete oscillation, can be used to calculate the frequency of the oscillator. The frequency of an oscillator is the number of oscillations it completes in one second and is calculated by taking the reciprocal of the time period. Therefore, the frequency of this oscillator is 1/0.50 seconds, which is equal to 2.0 Hz.
To know more about the simple harmonic oscillator, click here;
https://brainly.com/question/30354005
#SPJ11
Q11. What fraction is:
(a) 4 months of 2 years?
(c) 15 cm of 1 m?
(b) 76 c of $4.00?
(d) 7 mm of 2 cm?
Answer:
a)[tex]\frac{4}{24}[/tex]
b)[tex]\frac{15}{100}[/tex]
c)[tex]\frac{76}{400}[/tex]
d)[tex]\frac{7}{20}[/tex]
sevensegmentdisplaye.v: a digital circuit that drives a segment of a seven-segment decimal display
A seven-segment display is a common type of digital display used to show numeric information. Each segment represents a single digit from 0 to 9 and can be individually illuminated to create the desired number.
Sevensegmentdisplaye. v is a digital circuit that drives a segment of a seven-segment display. It takes binary input and converts it into the appropriate signal to light up the segment.
The circuit is composed of logic gates such as AND, OR, and NOT gates, as well as flip-flops and decoders. These components work together to create the desired output signal. The binary input is decoded into the corresponding signal that drives the segment.
In the sevensegmentdisplaye.v circuit, each segment is driven by a separate circuit. The circuit includes a current-limiting resistor to protect the LED from burning out due to excessive current. When the appropriate signal is sent to the circuit, the LED lights up, creating the desired segment of the display.
Overall, the sevensegmentdisplaye.v circuit is a crucial component of any seven-segment display. Without it, the display would not be able to show numeric information accurately and efficiently.
You can learn more about binary input at: brainly.com/question/15400003
#SPJ11
a signal consists of the frequencies from 50 hz to 150 hz. what is the minimum sampling rate we should use to avoid aliasing?
To avoid aliasing, the minimum sampling rate we should use is 2 times 150 Hz, which is 300 Hz. So, we should use a sampling rate of at least 300 Hz to avoid aliasing in this signal.
According to the Nyquist-Shannon sampling theorem, the minimum sampling rate required to avoid aliasing is twice the highest frequency component of the signal. In this case, the highest frequency component is 150 Hz. Therefore, the minimum sampling rate required to avoid aliasing is:
2 x 150 Hz = 300 Hz
So, we would need to sample the signal at a rate of at least 300 Hz to avoid aliasing.
To know more about aliasing:
https://brainly.com/question/29851346
#SPJ11
The period of a sine wave is 40ms. What is the frequency?
a.25
b.50
c.75
d.100
Answer:
So, the frequency of the sine wave is 25 Hz
Explanation:
A 1300 kg car starts at rest and rolls down a hill from a height of 10 m. how much kinetic energy?
The car's kinetic energy at the bottom of the hill is approximately 127,400 J.
The potential energy the car has at the top of the hill due to its mass and height above the ground is given by the formula:
Ep = mgh
where m is the mass of the car (1300 kg), g is the acceleration due to gravity (9.8 m/s²), and h is the height of the hill (10 m).
Plugging in the values, we get:
Ep = (1300 kg) × (9.8 m/s²) × (10 m) = 127,400 J
At the bottom of the hill, all of the potential energy is converted to kinetic energy. Therefore, the car's kinetic energy at the bottom of the hill is also 127,400 J.
The formula for kinetic energy is:
Ek = ½mv²
where v is the velocity of the car. Since the car started from rest, its initial velocity was 0 m/s. Using conservation of energy, we can equate the potential energy at the top of the hill to the kinetic energy at the bottom of the hill:
Ep = Ek
mgh = ½mv²
Simplifying and solving for v, we get:
v = √(2gh)
Plugging in the values, we get:
v = √(2 × 9.8 m/s² × 10 m) ≈ 14 m/s
Finally, we can calculate the kinetic energy at the bottom of the hill:
Ek = ½mv² = ½ × (1300 kg) × (14 m/s)² ≈ 127,400 J
learn more about kinetic energy here:
https://brainly.com/question/26472013
#SPJ11
An object has a height of 0.064 m and is held 0.240 m in front of a converging lens with a focal length of 0.140 m. (Include the sign of the value in your answers.)
(a) What is the magnification?
(b) What is the image height?
m
(a) To find the magnification, we first need to determine the image distance (q). We can use the lens formula:
1/f = 1/p + 1/q
where f is the focal length (0.140 m), p is the object distance (0.240 m), and q is the image distance. Rearranging the formula to solve for q:
1/q = 1/f - 1/p
1/q = 1/0.140 - 1/0.240
1/q = 0.00714
q = 1/0.00714 ≈ 0.280 m
Now, we can find the magnification (M) using the formula:
M = -q/p
M = -0.280/0.240
M = -1.17
The magnification is -1.17.
(b) To find the image height (h'), we can use the magnification formula:
h' = M × h
where h is the object height (0.064 m). Plugging in the values:
h' = -1.17 × 0.064
h' ≈ -0.075 m
The image height is approximately -0.075 meters. The negative sign indicates that the image is inverted.
To know more about magnification visit:
https://brainly.com/question/21370207
#SPJ11
Two narrow slits 40 μm apart are illuminated with light of wavelength 620nm. The light shines on a screen 1.2 m distant. What is the angle of the m = 2 bright fringe? How far is this fringe from the center of the pattern?
The angle of the m = 2 bright fringe is 0.062 radians and its distance from the center of the pattern is 0.0444 meters.
The angle of the m = 2 bright fringe in a double-slit experiment can be calculated using the formula:
θ = mλ/d
where θ is the angle of the fringe, m is the order of the fringe, λ is the wavelength of light, and d is the distance between the two slits.
Substituting the given values, we have:
θ = (2)(620 nm)/(40 μm) = 0.062 rad
To find the distance of the m = 2 bright fringe from the center of the pattern, we can use the formula:
y = (mλL)/d
where y is the distance of the fringe from the center, L is the distance between the double-slit and the screen, and all other variables are the same as before.
Substituting the given values, we have:
y = (2)(620 nm)(1.2 m)/(40 μm) = 0.0444 m
To know more about bright fringe refer here
https://brainly.com/question/31315270#
#SPJ11
A student drops a ball of mass 0.5kg from the top of a 20m tall building. (a) How long does it take the ball to hit the ground (time of flight)? (b) What is the final velocity of the ball? (c) What is the average velocity of the ball?
To find the average velocity of the ball, we can use the equation: average velocity = (initial velocity + final velocity) / 2. Since the initial velocity is 0 m/s (as the ball is dropped):
average velocity = (0 + 19.82) / 2 ≈ 9.91 m/s
(a) To find the time of flight, we can use the formula:
h = 1/2 * g * t^2
Where h is the height of the building (20m), g is the acceleration due to gravity (9.8 m/s^2), and t is the time of flight. Rearranging this formula to solve for t, we get:
t = sqrt(2h/g)
Plugging in the values, we get:
t = sqrt(2*20/9.8) = 2.02 seconds
So it takes the ball 2.02 seconds to hit the ground.
(b) To find the final velocity of the ball, we can use the formula:
v^2 = u^2 + 2gh
Where v is the final velocity, u is the initial velocity (which is zero since the ball is dropped from rest), g is the acceleration due to gravity (9.8 m/s^2), and h is the height of the building (20m). Rearranging this formula to solve for v, we get:
v = sqrt(2gh)
Plugging in the values, we get:
v = sqrt(2*9.8*20) = 19.8 m/s
So the final velocity of the ball is 19.8 m/s.
(c) To find the average velocity of the ball, we can use the formula:
average velocity = (final velocity + initial velocity) / 2
Since the initial velocity is zero, we just need to divide the final velocity by 2:
average velocity = 19.8 / 2 = 9.9 m/s
The average velocity of the ball is 9.9 m/s.
To know more about average velocity visit:-
https://brainly.com/question/862972
#SPJ11
is the decay n→p β− ν¯¯¯e energetically possible?a. yesb. no
Yes, the decay n→p β− νe (neutron decaying to a proton, beta minus particle, and an electron antineutrino) is energetically possible. This process is known as beta minus decay and occurs in unstable atomic nuclei with excess neutrons.
The decay n→p β− ν¯¯¯e is indeed energetically possible. A neutron (n) decays into a proton (p), emitting a beta particle (β−) and an antineutrino (ν¯¯¯e) in the process. This decay occurs because the mass of the neutron is slightly greater than the mass of the proton, and the energy released from the decay accounts for the difference in mass. This is a long answer to your question, but it is important to understand the physics behind the decay process. The decay n→p β− ν¯¯¯e is possible because it conserves energy, electric charge, and lepton number. The neutron (n) is made up of one up quark and two down quarks, while the proton (p) is made up of two up quarks and one down quark.
To know more about proton visit :-
https://brainly.com/question/31760906
#SPJ11
if the small gear of radius 8 inches has a torque of 150 n-in applied to it, what is the torque on the large gear of radius 70 inches?
The torque on the large gear of radius 70 inches is approximately 1312.5 N·in.
Torque (τ) is defined as the product of force (F) and the perpendicular distance (r) from the axis of rotation to the point of application of the force, i.e., τ = F * r.
We are given the following information:
- The small gear has a radius of 8 inches.
- The torque applied to the small gear is 150 N·in.
To find the torque on the large gear, we can use the principle of torque conservation, which states that the torque applied to one gear is equal to the torque applied to another gear in the same system.
Since the gears are connected, their rotational speeds are related by the gear ratio, which is the ratio of their radii. In this case, the gear ratio is 70 inches (radius of the large gear) divided by 8 inches (radius of the small gear).
Thus, the torque on the large gear can be calculated as follows:
τ_large = τ_small * (r_large / r_small) = 150 N·in * (70 inches / 8 inches) ≈ 1312.5 N·in.
Therefore, the torque 1312.5 N·in.
To know more about torque, refer here:
https://brainly.com/question/12875964#
#SPJ11
1) A powerhouse is on one edge of a straight river and a factory is on the other edge, 100 meters downstream. The river is 50 meters wide. It costs 10 per meter to run electrical cable across the river and 7 per meter on land. How should the cable be installed to minimize the cost?
The cable should be installed in this manner to minimize the cost when applied for x= 29.3 meters upstream.
To minimize the cost of installing the electrical cable from the powerhouse to the factory, we need to find the shortest distance while considering the different costs for crossing the river and running on land.
First, let's use the Pythagorean theorem to find the direct distance across the river.
Since the river is 50 meters wide and the factory is 100 meters downstream, we get a right triangle with legs of 50 and 100 meters.
The direct distance (hypotenuse) will be √(50² + 100²) = √(2500 + 10000) = √12500 = 111.8 meters.
Now, let's find the cost for the direct distance: 111.8 meters * 10 = 1118.
Alternatively, we can run the cable across the river at a point closer to the powerhouse and then along the land to the factory.
Let x be the distance upstream from the factory where the cable crosses the river.
Then the total cost will be:
Cost(x) = 10 * √(50²
+ x²) + 7 * (100 - x)
To minimize the cost, find the minimum value of this function using calculus or other optimization methods.
In this case, the minimum cost occurs at x ≈ 29.3 meters upstream, giving a total cost of ≈ 982.4.
Thus, the cable should be installed in this manner to minimize the cost.
Learn more about Pythagorean triple at
https://brainly.com/question/15190643
#SPJ11