The international electrotechnical commission (iec) develops standards, which cover both wired and wireless communication technologies, that are commonly adopted by member countries in the European union (eu) is false.
What is the International Electrotechnical Commission (IEC)?They are working alongside the ISO and they are called the International Electrotechnical Commission (IEC). This body focuses on electronics and electronic standards.
Their Standards include a wide range of topics, such as:
Power productionSemiconductorsTelecommunicationsReal hardware for computers and networksTherefore, the ETSI Cyber Security Technical Committee (TC CYBER) creates information and communications technology (ICT) standards that are widely used by European Union member nations (EU). Hence the statement above is incorrect.
Learn more about wireless communication from
https://brainly.com/question/7022589
#SPJ1
providing space for students to write their name and date on a test sheet or answer sheet is a guideline used for:
Studnet Name:_______________________ Date:__/__/____
Q1:
A.
B.
C.
D.
You want to create a loopback plug using a single rj45 connector. How should you connect the wires in the connector?.
Make a loopback plug with a single rj45 connector. You must connect the pins in the following order:
Connect pin 1 with pin 3 , pin 2 to pin 6 and pin 4 to pin 5.
What is Loopback plug?
A loopback plug is a device that is used to test ports (such as serial, parallel, USB, and network ports) in order to diagnose network and network interface card (NIC) problems. Loopback plug equipment enables the testing of simple networking issues and is inexpensive. A loopback plug device is categorized as male or female.
A loopback adapter or loopback cable is another name for a loopback plug.
To know more about loopback plug, click the link below: https://brainly.com/question/14633368
#SPJ4
the process of reading an actual database schema and producing a data model from that schema is called .
Reverse engineering describes the technique of extracting a data model from a real database schema.
Explain about the Reverse engineering?When original parts for vintage equipment are no longer available, reverse engineering is frequently employed to make replacement parts. To improve security, computer component reverse engineering is also carried out.
Software, machineries, aircraft, architectural structures, and other goods are disassembled in the process of reverse engineering, also known as back engineering, in order to obtain design data. Deconstructing individual parts of larger items is a common aspect of reverse engineering.
Disassembling a product to learn how it operates is known as reverse engineering. Although it is frequently used to copy or improve the object, its primary purpose is to study and learn about how something works.
To learn more about Reverse engineering refer to:
https://brainly.com/question/29433728
#SPJ4
What is the average number of times that a specific risk is likely to be realized in a single year?.
Answer:
The annualized rate of occurrence is the average number times that a specific risk is likely to be realized in a single year.
Explanation:
hope this helps (:
which static route statement could you add to the central router to ensure that a default route always exists in the routing table regardless of the interface state?
A route must utilize a network ID and subnet mask combination that will match any destination IP address in order to be categorized as a default static route.
When configuring a router, routes are explicitly specified as part of static routing. No routing protocols are involved in any routing; it just happens. An administrator-defined route known as a "static route" directs packets traveling between the source and destination to follow the designated path.
A static route is a path that has been pre-determined for a packet to take in order to go to a particular host or network. Some ISPs require static routes rather than dynamic routing protocols when creating your routing table. To share routing data with a peer router, static routes don't need CPU resources.
To know more about static route click here:
https://brainly.com/question/27327783
#SPJ4
animation and interactivity can be implemented through . a. javascript b. vbscript c. svgscript d. a and b e. b and c f. a and c g. a, b, and c
Animation and interactivity can be implemented using a combination of: (Option G.)
JavaScriptVBScriptSVGScriptAnimation and interactivity can be implemented through:Option G.
JavaScript is a scripting language used to create interactive webpages. VBScript is a scripting language used to create web applications and automate processes. SVGScript is an XML-based scripting language used to create graphics and animation for webpages.All three scripting languages can be used together to create interactive and animated webpages.
By using JavaScript, VBScript, and SVGScript together, developers can create dynamic and engaging webpages that draw in and keep visitors. Animations and interactive features can be used to make webpages more appealing and to provide a better user experience. Additionally, these scripting languages can be used to create complex forms, applications, and visualizations that go beyond static webpages.
Learn more about Animated webpages: https://brainly.com/question/14465528
#SPJ4
You want to replace all forms of the word "puppy" in your document with the word "dog." Which do you choose?
In order to replace all forms of the word "puppy" in your document with the word "dog" you need to use the "Find and Replace Tool".
What is the importance of the Find and Replace Tool?Find and Replace allows you to search for words or formats in a document and replace all instances of a term or format. This is very useful in long papers. To utilize Find and Replace, use Ctrl+H or go to the Home tab on the ribbon and select Editing, then Replace.
The Find and Replace tool automates the process of looking for text within a document. You may use wildcards and regular expressions to fine-tune a scan in addition to locating and replacing words and phrases. Search for and replace particular formatting.
Learn more about Find and Replace:
https://brainly.com/question/28985879
#SPJ1
Using new technology, some insurers are offering customized rates for buyers who install equipment in their car that monitors speed, acceleration, distance traveled, and other factors. What problems are the insurance companies trying to solve?.
The difficulties that the insurance companies are aiming to address are moral hazard and adverse selection. B is the best choice as a result.
What is insurance?A party undertakes to ensure another party compensation in the event of a certain loss, damage, or injury in exchange for a fee as a way of financial loss protection. It is a method of risk management that is mostly applied to protect against the risk of a potential loss that may or may not occur.
It ensures the insured person obtains everything is legally required for them to regain their sanity and make decisions .A new beginning that makes up for all losses.
According to the theory of adverse selection, insurance buyers are more inclined to choose bad risks than good ones. Having insurance can change one's behavior, which is a phenomena known as moral hazard. If one had insurance, they might act carelessly.
Is insurance a useful thing?Because permanent life insurance can generate cash value or be converted into cash, depending on the type of policy and how it is used, it may be seen as a financial asset. In other words, the majority of permanent life insurance contracts have the capacity to accumulate monetary value over time.
Adverse selection and moral hazard are the issues that the insurance companies are attempting to address because only those who are confident in their ability to drive safely will buy this insurance.
As a result, choice B is suitable.
To learn more about insurance visit:
https://brainly.com/question/27822778
#SPJ4
you will need 2 terminals open for this. just like in class, you need a main terminal for generating payloads, running slmail-testbed.py, etc., and another terminal with a netcat listener listening for the reverse shell. therefore, you must use the script command in both terminals to create 4 files using 1 call to script in each terminal window.
Linux has a command called Netcat that can be used for network testing, port listening, port redirection, and port checking. The Swiss Army Knife of networking tools is another name for Netcat.
What is networking?Networking is defined as the process of moving data around and transferring it between nodes in a network through a common channel. Making new friends, industry contacts, and even commercial partners is the goal of networking.
A hacker typically tries to get shell access to a system in order to run the malicious payload commands. The obtained shell is known as the reverse shell, and an attacker might use it to execute any code while posing as the root user.
Thus, Linux has a command called Netcat that can be used for network testing, port listening, port redirection, and port checking. The Swiss Army Knife of networking tools is another name for Netcat.
To learn more about networking, refer to the link below:
https://brainly.com/question/15002514
#SPJ1
Students will write 3 classes: BankAccount.java, BankAcountDemo.java and Financial.java
the BankAccount.java class should have the following components:
5 instance variables : balance, accName, accNum, accountType, interestRate
1 static variable : lastAccNum = 0
2 constructors : default and an overloaded constructor that takes in 3 explicit parameters(balance, accName, and accountType) to initialize the fields. (demonstrate the use of the keyword "this"). The other two fields will be assigned values inside the constructor.
13 methods
4 setter methods : setBalance, setName, setAccountType, and setInterestRate
4 getter methods : getBalance, getName, getAccountType, and getInterestRate
a withdraw method
a deposit method
a transfer method
a displayAccountInfo method
an addInterest method that invokes the static method percentOf from the Financial class and takes in two parameters; the interestRate field and the balance field. In this method interest will be added only to savings accounts according to the interestRate value. You should NOT add interest to a checking account.
Note: after calculating the interest, you will need to add it to the balance.
The BankAccountDemo.java class should have the following:
Create 3 objects AdamsAcc (C), SamsAcc(S), and LeilasAcc(S) use the default constructor for the first object and the second constructor for second and third object.
you are free to test your code and use the methods on any objects, but make sure to:
invoke and demonstrate all the methods
Invoke the addInterest method two times; once with LeilasAcc and once with SamsAcc.
invoke the displayAccountInfo() method several times to show all the changes.
Final Step: add an exception to the withdraw method whenever the amount to be withdrawn exceeds the balance.
Test this by trying to withdraw an amount that is greater then the balance in your Demo class.
Take a snapshot of the the generated exception.
A component is a real object that has a visual representation that can be displayed on a screen and can interact with the user. Components include things like buttons, checkboxes, and scrollbars in a typical graphical user interface.
What are the main components of Java class?A method definition contains two main components, like a class: the method declaration and the method body. The following figure illustrates how the method declaration defines each of the method's attributes, including access level, return type, name, and parameters. All the action happens in the method body.
Therefore, With the use of class diagrams, we can abstractly model software without having to examine the source code. Classes in the source code and class diagrams are identical.
Learn more about Java here:
https://brainly.com/question/14615266
#SPJ1
A beams critical load before it buckles is based on the following formula:
P=x^2 EI/L^2
Where P is critical load, E is a materials modulus, I is the beam moment of inertia, and L is the beams length, The data for a beam is contained in 'BeamData. bxt in the order previously mentioned, excopt P. Calculate P and determine whether the beam will buckle under 1000 lbs. Use the bolded variables in your solution. Script 0 xloading in the variables load(' lleambata.txt') M
Calculating the beams load Assessment: 2 of 4 Tests Passed Check use of load(). Check value of E,1, and L. The submistion must contain a variable named E Make sure you are wing E,1 and Land are assigning the data from the toxt file to the corroct variable Feedback hidden for errors below, an these omors may be due to the initial offor Show Feedback Check conditional statement. Check displaying results to the user.
MATLAB is a high-performance language used for technical computing.
How To calculate the critical load of a beam?To calculate the critical load of a beam using the given formula and data, you can use the following script in MATLAB:
% Load the beam data from the text file
load('BeamData.txt')
% Calculate the critical load
P = x^2 * E * I / L^2
% Check if the beam will buckle under 1000 lbs
if P < 1000
disp('The beam will buckle under 1000 lbs.')
else
disp('The beam will not buckle under 1000 lbs.')
end
What does this script do?The script first loads the beam data from the text file using the load() function.
Then, it calculates the critical load of the beam using the given formula and the data for the beam's modulus, moment of inertia, and length. Finally, it checks if the critical load is less than 1000 lbs, and displays a message to the user indicating whether the beam will buckle under that load.
To Know More About MATLAB, Check Out
https://brainly.com/question/12950689
#SPJ1
You are a cyber forensic specialist, and you are asked to retrieve the password of an employee account suspected of being an imposter. As you are provided with the enterprise's strong password policy, which of the following methods will be the easiest for you to use when retrieving the password? a. Brute force attack b. Dictionary attackc. Hybrid attack d. Rule attack
Since You are a cyber forensic specialist, and you are asked to retrieve the password of an employee account suspected of being an imposter, the method that will be the easiest for you to use when retrieving the password is option d. Rule attack.
What is dictionary attack?A kind of brute force attack where a hacker uses a "dictionary list" of terms and expressions that people and companies frequently use to try to break a password-protected security system is the term dictionary attack.
Note that Hashcat's rule-engine was created to be 100% compatible with John the Ripper and PasswordsPro rules and vice versa for all functions that share the same letter name. Later, we began introducing some of our own, incompatible functions. To avoid confusion, these functions were given their own letter names.
Therefore, based on the above, When an attacker is aware of the rules that a system's passwords are built on, such as "alphanumeric and eight characters long," they can target their password cracking technique.
Learn more about Rule attack from
https://brainly.com/question/29358198
#SPJ1
Assume the PC starts at address 0x00000120 and the below instructions execute. The first instruction is located at the given address. LDR R3. [10] MOV R3, #Ox42 AND R6, R5, R4 EOR R3, R5 SBC R1, R2, R5 What will be the value of the PC AFTER the last instruction executes? O 1.0x00000120 2. Ox00000128 3. Ox00000124 4. Ox00000134 5. Ox00000130
Option 2 is the correct answer
The value of the PC after the last instruction executes will be Ox00000128, when the first instruction is located at the given address. LDR R3. [10] MOV R3, #Ox42 AND R6, R5, R4 EOR R3, R5 SBC R1, R2, R5.
What is an Instruction in a PC?
A computer instruction is a command issued by a computer program to a computer processor. At its most basic, an instruction is a sequence of 0s and 1s that describes a physical operation to be performed by the computer.
Typically, computer instructions have three fields. An operation code, or opcode, field identifies the operation to be performed, such as "add" memory data to a specific register. They also have an address field that indicates where the registers and memory are located, as well as a mode field that indicates how the registers and memory will perform.
To know more about Instruction, visit: https://brainly.com/question/28228486\
#SPJ4
you are the system administrator for several windows servers in your company. instead of scheduling the same updates for all the windows servers, your systems engineer would like to begin approving the updates based on specific groups of servers.
You may manage your Windows Server updates by using Microsoft's Windows Deployment Services (WSUS).
About WSUS.
To approve, reject, or schedule updates differently for various server groups, you can use WSUS to build customized patch groups for your servers. Additionally, WSUS offers comprehensive reporting and alerting tools so you can maintain track of the current of your system updates. Microsoft offers a software upgrade service called Windows Server Update Services (WSUS). It allows administrators to control the delivery of patches and updates for Windows computers to PCs in a business setting and is an essential component of the operating system called Windows Server.
To know more about WSUS
https://brainly.com/question/28238567
#SPJ1
bitcoin is designed such that the attacker cannot reverse or tamper with the transactions. explain how, referencing its technical design features as needed.
Answer: -=-
;;;;;;;;;;;;;-----;;;;;;;;;;;;;;;;;;;
write a boolean function named is prime which takes an integer as an argument and returns true if the argument is a prime number, or false otherwise.
Answer:
if num > 1:
for i in range(2,num):
if (num % i) == 0:
print(num,"is not a prime number")
print(i,"times",num//i,"is",num)
break
else:
print(num,"is a prime number")
Explanation:
The required boolean function is an illustration of statistical operations, using integers as an argument and returns.
What are Prime numbers?Prime numbers are defined as any number that is any integer with exactly two factors 1 and the number itself. is said to be a prime number.
Here is a function that takes an integer as an argument and returns True if it is a prime number, or False otherwise:
def is_prime(n):
if n < 2:
return False
for i in range(2, int(n ** 0.5) + 1):
if n % i == 0:
return False
return True
This function first checks if the number is less than 2, in which case it is not a prime number. If the number is 2 or greater, the function then iterates through the range of numbers from 2 to the square root of n (inclusive), checking if n is divisible by any of them. If n is divisible by any of these numbers, it is not a prime number and the function returns False. If the loop completes without finding a divisor, the function returns True.
To learn more about the prime number click here:
https://brainly.com/question/13665423
#SPJ12
Your site is dependent upon the use of the rlogin utility for remote access. For security reasons, you want to prevent the hosts in the marketing department from accessing the payroll server, but allow all others to do so. Which file should you use to create this restriction?
So to the hosts can be denied in the marketing department and to give access to other we have to use the file (hosts. deny)
What is meant by hosts deny?
The hosts. allow file is used in conjunction with hosts to determine whether to accept or deny a connection attempt. deny. The hosts. allow file is just a plain text configuration file with a simple syntax.
So to the hosts can be denied in the marketing department and to give access to other we have to use the file hosts. deny
What is meant by hosts deny?
The hosts. allow file is used in conjunction with hosts to determine whether to accept or deny a connection attempt deny. The hosts. allow file is just a plain text configuration file with a simple syntax.
Essentially, hosts
Deny, which we also employ here when configuring hosts, is just the act of denying the undesired source in a common language.
Deny is used to stop the marketing division from using the server and instead assigns another as the host.
allow
Thus hosts. deny is used in this case
To know more about remote access follow this link:
https://brainly.com/question/29032807
#SPJ4
compare the advantages and disadvantages of a multipage form that uses tab controls versus a multipage form that uses page breaks.
I don't want to imply that tabbed controls are always preferable to page breaks. Each has its advantages, and depending on the design of your form, a page break may be preferable.
Page breaks, for example, can be used to create multiscreen forms in which each page is the same size and each window displays only one page at a time. However, I believe that tabbed pages can often achieve the same goals more efficiently.
Page Breaks:
A page break causes a new page to be generated in a form or report. Assume your form has two pages, so each record is presented on two pages. You've arrived at the first of two pages. When you press the Page Down button, the text that follows the page break appears at the top of your screen. It is important to note that a page break is only visible in Form View when the Default View property (found on the Format tab of the Form property sheet) is set to Single View.
Tab Controls:
Tab controls are an effective way of segregating and presenting a large amount of data in a small space. The Employees form in the Northwind database is a good example of how to use a tab control effectively. The Company Info page includes fields like Hire Date and Reports To, while the Personal Info page includes fields like Home Phone and Birth Date. You switch pages by clicking the tabs, as you might expect. The tabbed pages efficiently use available space to separate different types of data.
To know more about Tab Controls, visit: https://brainly.com/question/955910
#SPJ4
according to dr. barrera, (fill in the blank) is distinguished for using computer models as the primary metaphor for describing cognition.
Computer models as the primary metaphor for describing cognition is traits of cognitive science
What is meant by computer models ?
Scientists can run thousands of computer-simulated experiments thanks to computer modelling. The small number of laboratory tests that have the best chance of solving the problem under study are found via millions of computer experiments. A biological system can be studied using computational models of today on various levels.
Computer models can be divided into three categories. The simplest ones assume that the current observable motion computer model and statistical relationships based on the normal hurricane routes in a region. production, it, noun a computer-generated simulation of a plan or design, often used to learn how to make or improve a product: Automobile manufacturers frequently test the aerodynamics of their designs using computer models.
To learn more about computer model refer to :
https://brainly.com/question/17994947
#SPJ4
Which statement best explains why the Find Unmatched Query Wizard must be used with an outer join and not an inner join?
a. An outer join is the default type of join and cannot be changed for this type of query.
b. An inner join eliminates all unmatched records by design, so it cannot identify records for this type of query.
c. Inner joins use data from only one table, and the Find Unmatched Query Wizard needs data from two tables.
d. Outer joins are the only type of joins that have the Query Wizard options in the Create tab of the Ribbon.
The statement that best explains why the Find Unmatched Query Wizard must be used with an outer join and not an inner join is: ". Inner joins use data from only one table, and the Find Unmatched Query Wizard needs data from two tables." (Option C)
What is Find Unmatched Query Wizard?To compare two tables, utilize the Find Unmatched Query Wizard.
Select the table with mismatched records on the first page of the wizard, then click Next. Select the Goods table, for example, to view a list of Northwind products that have never been marketed.
As the name indicates, the Find Unmatched Query reveals entries in one table or query that have no match in another table or query. For example, the Find Unmatched Query may be used to find existing records in an inherited table that violate the database's referential integrity constraints.
Learn more about Find Unmatched Query Wizard:
https://brainly.com/question/6844558
#SPJ1
which term refers to a data obfuscation technique that replaces sensitive data with random data called a token?
Tokenization is the best solution to meet the requirement. Hence option A is correct.
What is database administration?Database administration is defined as the information technician responsible for overseeing and carrying out all tasks necessary to successfully manage a database environment. Their responsibilities include ensuring that a data management policy is followed and that these crucial pieces of technology remain operational.Tokenization is defined as a method by which a piece of sensitive information, like a credit card number, is replaced by a token-based substitute value. You can convert indivisible assets into token forms through tokenization.The token is a randomized data string that has no essential or exploitable value or meaning. It is a unique identifier which retains all the pertinent information about the data without compromising its securityIn some instances, tokens are created through the use of algorithms, such as hashing techniques. Whether personal information that has been tokenized is still considered “personal information” depends upon the particular law or regulation at issue.To learn more about technique refer to:
https://brainly.com/question/9979302
#SPJ4
If a local variable and a global variable have the same name within the same program, the ______ resolution operator must be used
If a local variable and a global variable have the same name within the same program, the Scope resolution operator must be used.
What is scope resolution operator ?Scope is an enclosing context used in computer programming to link values and expressions. The scope resolution operator, in particular by specifying a namespace, aids in identifying and defining the context to which an identifier corresponds.The double colon, also known as the scope resolution operator, is a token that permits access to a class's static, constant, and overridden properties and methods. Use the class name to refer to these objects when referencing them from outside the class specification.Scope resolution within modules is a special case of common object member access in some languages, particularly those influenced by Modula-3. In these languages, the standard method operator. is used for scope resolution. Examples of how scope resolution and method access are used in other languages, including C++ and Ruby, are provided below.To learn more about scope refer :
https://brainly.com/question/15554910
#SPJ4
write an expression that attempts to read an integer from standard input and store it in an int variable, x, that has already been declared.
The expression that attempts to read an integer from standard input and store it in an int variable, x, that has already been declared. is cin >> x;
C is a "strongly typed" programming language. A variable acquires a type. Once the type of a variable has been stated, it can only hold values of that type. For example, an int variable can only retain integers like 123 and NOT floating-point numbers like -2.17 or text strings like "Hello." To facilitate the understanding of data made primarily of 0s and 1s, the idea of type was incorporated into early programming languages. Understanding the kind of data substantially facilitates its interpretation and processing. Each variable can be stated only once.
Variables in C can be defined at any place in the program as long that they are declared before they are utilized. (In C previous to C99, all parameters were equal.)
Learn more about C++ Expression here:https://brainly.com/question/14852095
#SPJ4
Selecting an object and then pressing the ______ key and selecting additional objects, allows you to group all objects together.
Select the desired objects by pressing the Ctrl key. To group the objects together, choose Format > Group > Group.
The Ctrl key, which key is it?According to international standard ISO/IEC 9995-2, the Control key is often found on or close to the bottom left side of most keyboards, with many also having one at the bottom right.A Control key is used in computers. The Control key, like the Shift key, only occasionally performs any purpose when pushed alone. It is a modifier key that, when combined with another key, executes a particular action.When pushed in tandem with another key, the Control key (abbreviated Ctrl) in computing executes a particular task.To learn more about Control key refer to:
https://brainly.com/question/29491902
#SPJ4
a child process can be terminated by running the taskkill /pidcommand in the cli. a child process can be terminated by clicking on the x button in the top right corner of the application. a child process inherits environment variables and settings from its parent. a child process is dependent on its parent process until the child process is terminated.
The x button in the top right corner of the application can be used to end a child process.
What are applications?Applications are defined as a collection of computer programs that, using features that have been carefully considered, carry out a certain task for the user or another application. Applications might consist of a single program or a collection of programs.
The timeout command can be used to terminate a child process after a predetermined timeout. After the specified timeout, it executes the command that was supplied to it before being terminated with the SIGTERM signal.
Thus, the x button in the top right corner of the application can be used to end a child process.
To learn more about applications, refer to the link below:
https://brainly.com/question/28650148
#SPJ1
4. suppose a computer running tcp/ip (with ipv4) needs to transfer a 1024 bytes file to a host. a. [4 pts] how many megabytes, including all of the tcp/ip overhead, would be sent? assume a payload size of 64 bytes. b. [2 pts] what is the protocol overhead, stated as a percentage? c. [4 pts] how small would the overhead have to be in kb for the overhead to be lowered to 10% of all data transmitted?
The Transmission Control Protocol and Internet Protocol (TCP/IP) is a popular network protocol. TCP/IP packets feature a little amount of protocol overhead, typically between 40 and 80 bytes in each packet.
What megabytes, including all the overhead?The actual data payload is often between 46 and 1500 bytes. The headers, which make up the overhead regardless of the payload size, total 26 bytes: 7 bytes for the Preamble. One byte SOF (Start of Frame)
Therefore, TCP/IP packets feature a little amount of protocol overhead, typically between 40 and 80 bytes in each packet.
Learn more about TCP/IP here:
https://brainly.com/question/27742993
#SPJ1
what are the main differences between the sql server always on failover cluster and the sql server always on availability groups?
AlwaysOn FailOver Clustering (FCI) is related to Windows Services FailOver Clustering (WSFC) (WSFC). This is a HA scenario in which two (or more) sql servers share a SAN, WAN, or NA.
AlwaysOn Availability Groups are an enhancement to Database Mirroring. Database mirroring is used for single databases with two or more nodes.
What is a sql servers?Microsoft created and sells SQL Server, an RDBMS, which stands for relational database management system.
A common programming language for interacting with relational databases, SQL is the foundation upon which SQL Server, like other RDBMS software, is built. The Microsoft implementation of SQL that includes a number of exclusive programming constructs is called Transact-SQL, or T-SQL, and it is linked to SQL Server.
For more than two decades, SQL Server has only operated in a Windows environment. Microsoft made it accessible on Linux in 2016. In October 2016, the Linux and Windows versions of SQL Server 2017 became generally available.
Learn more about sql servers
https://brainly.com/question/5385952
#SPJ4
Which of the following is a function of the steering committee for an IS department? A) writing program code B) imparting training C) adapting software D) setting IS priorities
Setting IS priorities are the function of the steering committee for an IS department.
What is Setting IS priorities?A priority queue is an abstract data type with each element also having a priority assigned to it. It is comparable to a conventional queue or stack data structure. An item with a high priority is served before an item with a low priority in a priority queue.
Problem solving, a necessary life skill, is the most significant component of computer science. The design, development, and analysis of hardware and software used to address issues in many business, scientific, and social contexts are topics covered by students.
Most commonly, newsletters, books, posters, magazines, and newspapers are produced using computers. They can be applied to almost any kind of publishing. Both hardcopy and electronic publishing use computers. Computers are equally crucial for writing.
To learn more about Setting IS priorities refer to:
https://brainly.com/question/17142306
#SPJ4
For this lesson, you will come up with your own challenging algorithm for other students to trace. It must contain at least 4 if statements, 1 else statement and use at least one and or or boolean condition.
Below is the program involves in tracing the possible output of the code, which has 5 variables in total. Python 3 is used to write the program.
Coding Part:
a , b, c, d, e = (10, 5 , 6, 2, 9)
#using the tuple unpacking, assigning values to the given variables a, b, c, d, e
if a > b:
#The first, if statement which tests if the variable a is greater than b
e = b + 1
#if it is. Set variable e = b + 1
if b > c :
#if the above check becomes false, then we check if b > c
e = b * 2
#if it is, set variable e = b×2
if c > d :
#if the above is false, check if c >d
e = c /2
#if it is, set, variable e to c divided by 2 ; if not
if (d>e) or (d > c):
#if either condition is true,
e = d -2
#set e to d - 2 ; if not
if e < a :
#Check if e > a
e = e * 5
# set e to e multiplied by 5
print(e)
#display the final value of e
To learn more about Python program, visit: https://brainly.com/question/26497128
#SPJ4
the items below describe different elements of a hypertext link as it appears in html. which are especially true about the link's highlighted text, as opposed to other elements of the link? select all that apply.
The options that are especially true about the link's highlighted text, as opposed to other elements of the link are options A and C:
A. Click on the text and the browser follows the link.
C. Not inside the "a" tag in the HTML; instead, it is surrounded by the "a" tag and its "end" tag
What is it called when you click on a link?In order to access another website, you can or need to click on a text or icon that is marked as a hyperlink. As a point of connection between one page and other pages on the internet, the link is one which is typically blue and underlined is one that acts as a reference. It is known as the anchor text that is the text that is linked.
Note that Angle brackets ( >) must always be used around tags. Element and attribute combinations make up tags. An element is something that appears on a page, like a heading, paragraph, or image, and attributes are characteristics that are used to describe that element. Normal tag movement involves pairs.
Therefore, in the context of the question, The element is one of many HTML elements that lacks any content. The term "empty element" refers to these components. The end tag is absent from empty elements.
Learn more about HTML from
https://brainly.com/question/4056554
#SPJ1
See full question below
The items below describe different elements of a hypertext link as it appears in HTML. Which are especially true about the link's highlighted text, as opposed to other elements of the link? Multiple Choice
A. Click on the text and the browser follows the link.
B. The text is not displayed when the browser displays the page.
C. Not inside the "a" tag in the HTML; instead, it is surrounded by the "a" tag and its "end" tag
D. Contains the URL