PLEASE HELP ME ASAP!!!!
Answer:
otinni oSame lage ta dili pud ko ka comment sa live Ni madamstin
Answer:
it can be used to locate underwater objects
a shopping bag can provide an upward force of 65N before breaking. A shopper puts 5 kg of groceries in the bag. If the shopper tries to lift the bag with an upward acceleration of 2 m/s/s, will the bag break?
Answer:
Since Force is Mass * Acceleration, the equation would be:
5kg * 2m^2 = 10N
(10N is less than 65N)
Therefore, it would not be enough force for the bag to break.
SOMONE PLEASE HELP ASAP!!!!
violet
it has the shortest wavelength
State the role of an electromotive force (EFF) in a current flow
Answer:
The emf source acts as a charge pump, moving negative charges from the positive terminal to the negative terminal to maintain the potential difference. This increases the potential energy of the charges and, therefore, the electric potential of the charges.
Explanation:
MARK AS BRAINLEST!!
For variables control, a circuit voltage will be measured using a sample of five circuits. The past average voltage for samples of 5 units has been 3.4 volts, and the range has been 1.3 volts.
Required:
What would the upper and lower control limits be for the resulting control charts (average and range)?
Answer:
Average :
UCL = 4.15
LCL = 2.65
Range :
UCL = 2.75
LCL = 0
Explanation:
Given :
Sample size, n = 5
Average, X = 3.4
Range, R = 1.3
A2 for n = 5 ; equals 0.577 ( X chart table)
For the average :
Upper Control Limit (UCL) :
X + A2*R
3.4 + 0.577(1.3) = 4.1501
Lower Control Limit (LCL) :
X - A2*R
3.4 - 0.577(1.3) = 2.6499
FOR the range :
Upper Control Limit (UCL) :
UCL = D4*R
D4 for n = 5 ; equals = 2.114
UCL = 2.114*1.3 = 2.7482
Lower Control Limit (LCL) :
LCL = D3*R
D3 for n = 5 ; equals = 0
LCL = 0 * 1.3 = 0
A box has base dimensions of 30 cm x 30 cm and a mass of 3 kg. Calculate to what
depth it sinks when placed in a tank of water (assume the sides are sufficiently high,
so that it floats). Density of water = 1000 kgm-3. Assume g=10 ms-2 for this problem.
Answer:
60
Explanation:
A box has base dimensions of 30 cm x 30 cm and a mass of 3 kg. Calculate to what
depth it sinks when placed in a tank of water (assume the sides are sufficiently high,
so that it floats). Density of water = 1000 kgm-3. Assume g=10 ms-2 for this problem.
A 20" round duct is 275' in length. The duct is carrying 2,900 CFM at a friction loss of 0.12 inches WG per 100 feet.
What is the total friction loss through the duct?
How far an object moves from a reference point is known as
type your answer...
Answer:
distance
hope it helps
Explanation:
-
Drag and drop a term to match these examples with the correct level of organization.
Tissue:
Organ:
Organ system:
--------------------------------------------------------------------------------------------------------------
A-cardiac muscle
B-circulatory system
C-heart
D-human body
Answer:
Tissue: cardiac muscle
Organ: Heart
Organ System: Human Body, Circulatory System
Explanation:
The cardiac muscle makes up an organ, making it a tissue
The Heart makes up a organ system, making it an organ
Both the human Body and The Circulatory System make up an organism, making them organisms
Write a method which prevents ice from melting quickly.
Answer:
blocks of ice are usually covered with cloth or sawdust while being stored
An object is placed of 20cm from a concave mirror whose focal length is 10cm. what is the distance of image formed ?
Answer:
Answer 43cm
Explenation:
if you divide it to 4 it will convert to 43 so answer is 43cm if this wrong im sorry but mine is perfect thankss :)
in which reaction is there a transformation of mass into energy
Answer:
There is a transformation of mass into energy un nuclear fusion
what do you mean by wave
optics
Answer:
hope it helps.
stay safe healthy and happy.Which statement is true about the part of the electromagnetic spectrum that human eyes can detect?
It contains ultraviolet, visible, and infrared light.
It is divided into nine ranges of wavelengths.
It is divided into seven ranges of wavelengths.
It contains only the colors of the rainbow and television waves.
Answer:
A. it contains ultraviolet, visible, and infrared light
Answer:
It is divided into seven ranges of wavelengths
Explanation:
i took the test
Car A of mass 1200kg traveling at 10m/s , collided in too the back of the car B, which is stationary. Following the collision,. The two cars stick together and travel at 6m/s. What is the mass of a car B?
Answer:
Car B has a mass of 800 kg.
General Formulas and Concepts:
Momentum
Law of Conservation of Momentum: [tex]\displaystyle m_1v_{1i} + m_2v_{2i} = (m_1 + m_2)v_{f}[/tex]
Explanation:
Step 1: Define
Identify variables
[Given] m₁ = 1200 kg
[Given] v₁i = 10 m/s
[Solve] m₂
[Given] v₂i = 0 m/s
[Given] vf = 6 m/s
Step 2: Solve for m₂
Substitute in variables [Law of Conservation of Momentum]: (1200 kg)(10 m/s) + m₂(0 m/s) = (1200 kg + m₂)(6 m/s)Multiply: 12000 kg · m/s = (1200 kg + m₂)(6 m/s)Isolate m₂ term: 2000 kg = 1200 kg + m₂Isolate m₂: 800 kg = m₂Answer:
Explanation:
Caraofmass1200kg
Q: Winding roads and sharp curves are inherently dangerous
because -
A- You can't see far ahead
B- The speed limit is so slow
C- There may be other vehicles traveling in the
opposite direction
D- You may struggle to stay at the same speed
Answer:
A) you can't see far ahead
D. You may struggle to stay at the same speed.
Winding roads and sharp curves are dangerous because of centrifugal forces while taking curves, whose classic formula is described below:
[tex]F = m\cdot \frac{v^{2}}{r}[/tex] (1)
Where:
[tex]F[/tex] - Centrifugal force, in newtons.[tex]v[/tex] - Speed, in meters per second.[tex]r[/tex] - Radius of curvature, in meters per second.Sharps curves are characterized by low radii of curvature. Given that centrifugal force is inversely proportional to the square radius of curvature and it is opposed to friction force between tires and pavement, if centrifugal force is higher than maximum static friction force, then a car accident could if driver does not decelerate.
Therefore, correct choice is D.
We kindly invite to see this question on centrifugal forces: https://brainly.com/question/545816
what is the focalength of the combination of two thin renses of power -5D and -2D placeci in contact with each other?
Answer:
f = - 0.143 m = - 14.3 cm
Explanation:
First, we will calculate the power of the combination of lenses:
P = P₁ + P₂
where,
P = Power of Combination = ?
P₁ = Power of first lens = - 5D
P₂ = Power of second lens = - 2D
Therefore,
P = - 5D - 2D
P = - 7D
Now, the focal length can be given as:
[tex]f = \frac{1}{P} \\\\f = \frac{1}{-\ 7\ D} \\\\[/tex]
f = - 0.143 m = - 14.3 cm
Negative focal length indicates that combination will act as diverging lens.
A student must determine how the mass of a block affects the period of oscillation when the block is attached to a vertical spring. The value of the spring constant is known. The student writes the following experimental procedure.
1. Use an electronic balance to measure the mass of the block.
2. Attach the block to the vertical spring.
3. Displace the block from the system's equilibrium position to a new vertical position.
4. Release the block from rest.
5. Use a meterstick to measure the vertical displacement of the center of mass of the block from the system's equilibrium position to its maximum vertical position above the equilibrium position.
6. Use a stopwatch to measure the time it takes for the system to make ten complete oscillations.
7. Repeat the experiment for different vertical displacements and block masses.
Which of the following steps of the procedure should the student revise to make the determination? Justify your selection.
a. Step 3, because the student must specify whether the new vertical position should be above or below the system's equilibrium position.
b. Step 5, because the meterstick should be used to measure total displacement of the system from its lowest vertical position to its highest vertical position.
c. Step 6, because the stopwatch should be used only to measure the time it takes for the system to make 1 complete oscillation.
d. Step 7, because the experiment should not be repeated for different vertical displacements and block masses.
Answer:
the step that the student should change is step 7
Explanation:
The movement of the spring with block is a simple harmonic type movement, so the procedure proposed by the student is correct, but we must take some care.
Step 3 is important since each movement will be started with similar conditions, also if any displacement is very large we can get out of the linear approximation of Hooke's law, for which we need to know the equilibrium point, since from this point displacements will be measured.
Step 6 should be changed to measure various oscillations to find the average period and thus decrease the error in the time reading.
Step 7 is wrong since the objective of the experiment is to analyze the effect of different masses in the period of oscillation and this step prevents this objective from being carried out.
In conclusion, the step that the student should change is step 7
The step that should be revised to make the determination is c. Step 6, because the stopwatch should be used only to measure the time it takes for the system to make 1 complete oscillation.
Why should step 6 be revised?The student is trying to find the effect of the mass of the block on the period of oscillation in different vertical displacements.
The best way to do this is to measure the time taken per oscillation as this would show a much clearer picture to find the effect of the mass on the oscillation. Timing 10 oscillations will yield incorrect results.
In conclusion, option C is correct.
Find out more on measuring the effect of mass on oscillation at https://brainly.com/question/14745507.
I want the answer and that’s all
Answer:
Cuboid?
Explanation:
The nuclear reactions inside a star, such as our
sun, convert hydrogen into helium by means of a
process
known as?
Answer:
fusion
Explanation:
The nuclear reactions inside convert hydrogen into helium by means of a process known as fusion. It is this nuclear reaction that gives a star its energy. Fusion takes place when the nuclei of hydrogen atoms with one proton each fuse together to form helium atoms with two protons.
What is the relationship between a magnets magnetic force and a magnetic field?
Answer:
Electric forces exist among stationary electric charges; both electric and magnetic forces exist among moving electric charges. The magnetic force between two moving charges may be described as the effect exerted upon either charge by a magnetic field created by the other.
Answer:
i think this could help you
A spacecraft is powered by electricity generated by the heat produced when 23894Pu decays with a half-life of 87.75 y. Engineers predict that the spacecraft will have insufficient power to operate its instruments when the amount of 238 94Pu in its power generators drops below 67 % of the amount it had at launch on September 1, 1977
Required:
In what year will its instruments cease to function?
A neutral metal can is mounted on a foam stand. A positively
charged balloon is brought near. The can is touched on the
opposite side.
Answer:
Negative
Positive
Explanation:
When a positive charge balloon is brought near the neutral metal can, the positive charge in the ballon, delocalization and arrangement of like charges occurs. The positive charge then flow to the an end while the negative charges flows to the other end.
Thus, after being touched, the charge on the can is negative.
And, If not touched, the charge on the ballon remains positive.
After being touched, the charge on the can is negative and the charge on the balloon is positive.
What is charging by friction?When the two materials are rubbed each other, then the electric charged generated between them.
This charging of materials due to the rubbing or two materials against each other, is called the charging by friction.
This force of attraction or repulsion is identified by the sign of the particular charge. According to the property of interacting charges-
Like charges-For the like charges, when two charges same charges (positive-positive or negative -negative) interact to each other, then the charges repel each other.Unlike charges-For the unlike charges, when two charges interact to each other, then the charges attract each other.Here, the neutral metal can is mounted on a foam stand. A positively charged balloon is brought near. The can is touched on the opposite side.
The positive charge on the balloon, make it to lose the electron. By this, the balloon become positively charged.
The atom on the opposite side have an excess of electron. Thus, the can become negatively charged.
Hence, after being touched, the charge on the can is negative and the charge on the balloon is positive.
Learn more about the charging by friction here;
https://brainly.com/question/8418256
i need help with these questions thank u
Answer:
duvergentv boundaries
A hammer taps on the end of a 5.0-mm-long metal bar at room temperature. A microphone at the other end of the bar picks up two pulses of sound, one that travels through the metal and one that travels through the air. The pulses are separated in time by 9.00 ms.
Required:
What is the speed of sound in this metal?
Answer:
896.5 m/s
Explanation:
Given that :
Length of metal bar, λ= 5 m
Velocity in air, v = 343 m/s
Change in air frequency : = λ / v
f = 5 / 343 = 0.0145772 s = 14.5772 ms
Seperation time = 9ms
Change in time, t = 14.5772 - 9 = 5.5772 ms
Recall :
Velocity = Distance / time
V = 5m / 5.5772 * 10^-3 s
V = 896.50720 m/s
Velocity = 896.5 m/s
A physics professor demonstrates the Doppler effect by tying a 900 Hz sound generator to a 1.0- m -long rope and whirling it around her head in a horizontal circle at 100 rpm .
1. What is the difference between the highest frequency heard by a student in the classroom and the initial frequency of the sound generator?
2. What is the difference between the lowest frequency heard by a student in the classroom and the initial frequency of the sound generator?
The is a pulley system as shown in the diagram. Mass one has a magnitude of 5.11 kg, and mass two has a magnitude of 3.01 kg. If the static frictional force has a magnitude of 31.833N. and the system is stationary, then determine Theta and the normal force.
if someone can answer quickly it's very much appreciated.
Maybe b normal focrec N??
A flying stationary kite is acted on by a force of 9.8 N downward. The wind exerts a force of 45 N at an angle of 50.0 degrees above the horizontal. Find the force that the string exerts on the kite.
Answer:
38 N, 40.0° below the horizontal
Explanation:
Force exerted by an object equals mass times acceleration of that object: F = m ⨉ a. To use this formula, you need to use SI units: Newtons for force, kilograms for mass, and meters per second squared for acceleration.
leafy greens are considered the healthiest vegetable because of their ___ nutrients profile
Dense because food do be dense tho
how hot can the desert get
Answer:
134 f
Explanation:
The hottest temperature ever reliably measured in a desert was 134 degrees F, in Death Valley of the Mojave Desert in 1913.
Temperature. During the day, desert temperatures rise to an average of 38°C (a little over 100°F). At night, desert temperatures fall to an average of -3.9°C (about 25°F). At night, desert temperatures fall to an average of -3.9 degrees celsius (about 25 degrees fahrenheit).
Desert surfaces receive a little more than twice the solar radiation received by humid regions and lose almost twice as much heat at night. Many mean annual temperatures range from 20-25 degrees Celsius. The extreme maximum ranges from 43.5-49 degrees Celsius. Minimum temperatures sometimes drop to -18 degrees Celsius.