A block cipher encrypts one byte (or bit) at a time, whereas a stream cipher encrypts an entire block of data at a time is true.
What is a block cipher?Using a cryptographic key and algorithm, a block cipher encrypts data in blocks to create ciphertext. A stream cipher encrypts data one bit at a time, as opposed to the block cipher, which processes fixed-size blocks simultaneously.
Therefore, note that while stream ciphers change plaintext into ciphertext one byte at a time, block ciphers transform plaintext one block (64/128/256 bits) at a time. Block ciphers become slower as a result since a whole block must be gathered before the data can be encrypted or decrypted.
Learn more about block cipher from
https://brainly.com/question/29577420
#SPJ1
You want to create a loopback plug using a single rj45 connector. How should you connect the wires in the connector?.
Make a loopback plug with a single rj45 connector. You must connect the pins in the following order:
Connect pin 1 with pin 3 , pin 2 to pin 6 and pin 4 to pin 5.
What is Loopback plug?
A loopback plug is a device that is used to test ports (such as serial, parallel, USB, and network ports) in order to diagnose network and network interface card (NIC) problems. Loopback plug equipment enables the testing of simple networking issues and is inexpensive. A loopback plug device is categorized as male or female.
A loopback adapter or loopback cable is another name for a loopback plug.
To know more about loopback plug, click the link below: https://brainly.com/question/14633368
#SPJ4
what is an example of cybersquatting? a. overwhelming a firm's website by flooding it with seemingly legitimate messages b. acquiring a domain name to extort a firm, individual, product, or trademark holder c. slowing down packet transfer to an internet-connected computer d. threatening to destroy information stored in a firm's servers e. hacking into and defacing an organization's public web presence and refusing to let the site's owner regain control
Answer:
b. acquiring a domain name to extort a firm, individual, product, or trademark holder
true or false? the international electrotechnical commission (iec) develops standards, which cover both wired and wireless communication technologies, that are commonly adopted by member countries in the european union (eu).
The international electrotechnical commission (iec) develops standards, which cover both wired and wireless communication technologies, that are commonly adopted by member countries in the European union (eu) is false.
What is the International Electrotechnical Commission (IEC)?They are working alongside the ISO and they are called the International Electrotechnical Commission (IEC). This body focuses on electronics and electronic standards.
Their Standards include a wide range of topics, such as:
Power productionSemiconductorsTelecommunicationsReal hardware for computers and networksTherefore, the ETSI Cyber Security Technical Committee (TC CYBER) creates information and communications technology (ICT) standards that are widely used by European Union member nations (EU). Hence the statement above is incorrect.
Learn more about wireless communication from
https://brainly.com/question/7022589
#SPJ1
If a local variable and a global variable have the same name within the same program, the ______ resolution operator must be used
If a local variable and a global variable have the same name within the same program, the Scope resolution operator must be used.
What is scope resolution operator ?Scope is an enclosing context used in computer programming to link values and expressions. The scope resolution operator, in particular by specifying a namespace, aids in identifying and defining the context to which an identifier corresponds.The double colon, also known as the scope resolution operator, is a token that permits access to a class's static, constant, and overridden properties and methods. Use the class name to refer to these objects when referencing them from outside the class specification.Scope resolution within modules is a special case of common object member access in some languages, particularly those influenced by Modula-3. In these languages, the standard method operator. is used for scope resolution. Examples of how scope resolution and method access are used in other languages, including C++ and Ruby, are provided below.To learn more about scope refer :
https://brainly.com/question/15554910
#SPJ4
The ______ legislation includes $65 billion in investments in broadband internet access.
The Infrastructure legislation includes $65 billion in investments in broadband internet access.
THE INFRASTRUCTURE LEGISLATIONThe infrastructure legislation (formerly known as the Infrastructure Investment and Jobs Act) allocates a total of $65 billion for broadband, which will be spread across a range of schemes. The largest is the Broadband Equity, Access, and Deployment (BEAD) initiative, which will fund deployments in unserved and underserved areas through the states. Unserved regions lack access to broadband service with download speeds of at least 25 Mbps and upload rates of at least 3 Mbps.
These measures may involve research and data collection to identify unserved and underserved areas, the establishment or expansion of a state broadband office, employee training, and community outreach.
Learn more about other Legislation here:
https://brainly.com/question/15522014
#SPJ4
a relational database model allows relationships between data to be considered without concern for the .
A relational database model allows relationships between data to be considered without concern for the data.
In a relational database, data is stored in one or more tables (or "relations") of columns and rows, making it simple to see and comprehend how various data structures relate to one another. Data is organized in relational databases according to predefined relationships. Relationships are logical connections that have been made between various tables as a result of their interaction.
To organize data in tables, rows, and columns, use a relational database (RDB). By joining tables, an RDB can create links, or relationships, between information, which makes it simple to comprehend and gain insights into how different data points are related to one another.
To know more about relational database click here:
https://brainly.com/question/13262352
#SPJ4
the items below describe different elements of a hypertext link as it appears in html. which are especially true about the link's highlighted text, as opposed to other elements of the link? select all that apply.
The options that are especially true about the link's highlighted text, as opposed to other elements of the link are options A and C:
A. Click on the text and the browser follows the link.
C. Not inside the "a" tag in the HTML; instead, it is surrounded by the "a" tag and its "end" tag
What is it called when you click on a link?In order to access another website, you can or need to click on a text or icon that is marked as a hyperlink. As a point of connection between one page and other pages on the internet, the link is one which is typically blue and underlined is one that acts as a reference. It is known as the anchor text that is the text that is linked.
Note that Angle brackets ( >) must always be used around tags. Element and attribute combinations make up tags. An element is something that appears on a page, like a heading, paragraph, or image, and attributes are characteristics that are used to describe that element. Normal tag movement involves pairs.
Therefore, in the context of the question, The element is one of many HTML elements that lacks any content. The term "empty element" refers to these components. The end tag is absent from empty elements.
Learn more about HTML from
https://brainly.com/question/4056554
#SPJ1
See full question below
The items below describe different elements of a hypertext link as it appears in HTML. Which are especially true about the link's highlighted text, as opposed to other elements of the link? Multiple Choice
A. Click on the text and the browser follows the link.
B. The text is not displayed when the browser displays the page.
C. Not inside the "a" tag in the HTML; instead, it is surrounded by the "a" tag and its "end" tag
D. Contains the URL
you are a new lenovo service provider and need to use the recovery utility information on the lenovo support website. this information is restricted and is only available to users with service provider accounts. who should you contact to request a service provider user id and password?
Based on the above, the person that you should contact to request a service provider user id and password is Regional leads
Who is a Regional leads?The stores, merchandise, and general presence of the company in a given region are managed by region leaders. They make sure the objectives are achieved. If not, they come up with plans to achieve the goals. Leaders in a region are expected to comprehend both the local economy and its historical context.
A regional lead is a manager, educator, or administrator who is in charge of finding and supporting workforce champions within organizations within their assigned region. Hence, he or she is the best person for you to contact.
Learn more about Region from
https://brainly.com/question/2001834
#SPJ1
What is the average number of times that a specific risk is likely to be realized in a single year?.
Answer:
The annualized rate of occurrence is the average number times that a specific risk is likely to be realized in a single year.
Explanation:
hope this helps (:
Assume the PC starts at address 0x00000120 and the below instructions execute. The first instruction is located at the given address. LDR R3. [10] MOV R3, #Ox42 AND R6, R5, R4 EOR R3, R5 SBC R1, R2, R5 What will be the value of the PC AFTER the last instruction executes? O 1.0x00000120 2. Ox00000128 3. Ox00000124 4. Ox00000134 5. Ox00000130
Option 2 is the correct answer
The value of the PC after the last instruction executes will be Ox00000128, when the first instruction is located at the given address. LDR R3. [10] MOV R3, #Ox42 AND R6, R5, R4 EOR R3, R5 SBC R1, R2, R5.
What is an Instruction in a PC?
A computer instruction is a command issued by a computer program to a computer processor. At its most basic, an instruction is a sequence of 0s and 1s that describes a physical operation to be performed by the computer.
Typically, computer instructions have three fields. An operation code, or opcode, field identifies the operation to be performed, such as "add" memory data to a specific register. They also have an address field that indicates where the registers and memory are located, as well as a mode field that indicates how the registers and memory will perform.
To know more about Instruction, visit: https://brainly.com/question/28228486\
#SPJ4
The open source movement makes _____ available to everyone in an effort to continue to build and improve the functionality of open source software.
The open source movement makes source code available to everyone in an effort to continue to build and improve the functionality of open source software.
What is meant by source code ?In general, programming statements written by a programmer using a text editor or visual programming tool and then saved in a file are referred to as source code. When the source code is compiled using a C compiler, the output, a compiled file, is referred to as object code.
The foundation of a computer programme is its source code. It includes declarations, commands, instructions, functions, loops, and other statements that serve as guidelines for how the programme should run.
One or more text files kept on a computer's hard drive typically contain the source code that makes up a programme; these files are typically meticulously organized into a directory tree known as a source tree.
To learn more about source code refer to :
https://brainly.com/question/4593389
#SPJ4
providing space for students to write their name and date on a test sheet or answer sheet is a guideline used for:
Studnet Name:_______________________ Date:__/__/____
Q1:
A.
B.
C.
D.
you will need 2 terminals open for this. just like in class, you need a main terminal for generating payloads, running slmail-testbed.py, etc., and another terminal with a netcat listener listening for the reverse shell. therefore, you must use the script command in both terminals to create 4 files using 1 call to script in each terminal window.
Linux has a command called Netcat that can be used for network testing, port listening, port redirection, and port checking. The Swiss Army Knife of networking tools is another name for Netcat.
What is networking?Networking is defined as the process of moving data around and transferring it between nodes in a network through a common channel. Making new friends, industry contacts, and even commercial partners is the goal of networking.
A hacker typically tries to get shell access to a system in order to run the malicious payload commands. The obtained shell is known as the reverse shell, and an attacker might use it to execute any code while posing as the root user.
Thus, Linux has a command called Netcat that can be used for network testing, port listening, port redirection, and port checking. The Swiss Army Knife of networking tools is another name for Netcat.
To learn more about networking, refer to the link below:
https://brainly.com/question/15002514
#SPJ1
Students will write 3 classes: BankAccount.java, BankAcountDemo.java and Financial.java
the BankAccount.java class should have the following components:
5 instance variables : balance, accName, accNum, accountType, interestRate
1 static variable : lastAccNum = 0
2 constructors : default and an overloaded constructor that takes in 3 explicit parameters(balance, accName, and accountType) to initialize the fields. (demonstrate the use of the keyword "this"). The other two fields will be assigned values inside the constructor.
13 methods
4 setter methods : setBalance, setName, setAccountType, and setInterestRate
4 getter methods : getBalance, getName, getAccountType, and getInterestRate
a withdraw method
a deposit method
a transfer method
a displayAccountInfo method
an addInterest method that invokes the static method percentOf from the Financial class and takes in two parameters; the interestRate field and the balance field. In this method interest will be added only to savings accounts according to the interestRate value. You should NOT add interest to a checking account.
Note: after calculating the interest, you will need to add it to the balance.
The BankAccountDemo.java class should have the following:
Create 3 objects AdamsAcc (C), SamsAcc(S), and LeilasAcc(S) use the default constructor for the first object and the second constructor for second and third object.
you are free to test your code and use the methods on any objects, but make sure to:
invoke and demonstrate all the methods
Invoke the addInterest method two times; once with LeilasAcc and once with SamsAcc.
invoke the displayAccountInfo() method several times to show all the changes.
Final Step: add an exception to the withdraw method whenever the amount to be withdrawn exceeds the balance.
Test this by trying to withdraw an amount that is greater then the balance in your Demo class.
Take a snapshot of the the generated exception.
A component is a real object that has a visual representation that can be displayed on a screen and can interact with the user. Components include things like buttons, checkboxes, and scrollbars in a typical graphical user interface.
What are the main components of Java class?A method definition contains two main components, like a class: the method declaration and the method body. The following figure illustrates how the method declaration defines each of the method's attributes, including access level, return type, name, and parameters. All the action happens in the method body.
Therefore, With the use of class diagrams, we can abstractly model software without having to examine the source code. Classes in the source code and class diagrams are identical.
Learn more about Java here:
https://brainly.com/question/14615266
#SPJ1
according to dr. barrera, (fill in the blank) is distinguished for using computer models as the primary metaphor for describing cognition.
Computer models as the primary metaphor for describing cognition is traits of cognitive science
What is meant by computer models ?
Scientists can run thousands of computer-simulated experiments thanks to computer modelling. The small number of laboratory tests that have the best chance of solving the problem under study are found via millions of computer experiments. A biological system can be studied using computational models of today on various levels.
Computer models can be divided into three categories. The simplest ones assume that the current observable motion computer model and statistical relationships based on the normal hurricane routes in a region. production, it, noun a computer-generated simulation of a plan or design, often used to learn how to make or improve a product: Automobile manufacturers frequently test the aerodynamics of their designs using computer models.
To learn more about computer model refer to :
https://brainly.com/question/17994947
#SPJ4
to test dns configuration by resolving a host name to an ip address, which command or commands can you use? (choose all that apply.)
The commands used to test DNS configuration by resolving a host name to an ip address are
a. nslookup hostname*****
b. dig hostname
c. host hostname
Define DNS configuration.
A hierarchical and distributed naming system for computers, services, and other resources on the Internet or other Internet Protocol networks is called the Domain Name System (DNS). The domain names granted to each of the connected entities are linked to various pieces of information.
The Domain Name System, or DNS, converts domain names into machine-understandable IP addresses. DNS makes sure that the internet is not only easy to use but also operates smoothly, loading whatever content we request promptly and effectively.
To learn more about DNS Configuration, use the link given
https://brainly.com/question/27960126
#SPJ4
Which of the following correctly uses C++11's range-based for statement to iterate through every element of the array variable arr?
A) for (auto x : arr)
B) for (auto x; x
C) foreach (x in arr)
D) for x in arr
The for (auto x: arr) statement in C++11 iterates through each element of the array variable arr.
What is array?Since C++ 11, a range-based for loop has been included. It runs a for loop across a number of values. used as a more readable alternative to the classic for loop that operates over a range of values, such as all of the container's elements.
To create loops that must run through a range, use the range-based for statement. A range is anything you can iterate through, such as a std::vector or any other C++ Standard Library sequence whose range is determined by a begin() and end().
The range() function allows us to iterate across a set of code a predetermined number of times. The range() function returns a series of numbers that by default starts at 0 and advances by 1 before ending at a specified number.
To learn more about array refer to:
https://brainly.com/question/26104158
#SPJ4
write a boolean function named is prime which takes an integer as an argument and returns true if the argument is a prime number, or false otherwise.
Answer:
if num > 1:
for i in range(2,num):
if (num % i) == 0:
print(num,"is not a prime number")
print(i,"times",num//i,"is",num)
break
else:
print(num,"is a prime number")
Explanation:
The required boolean function is an illustration of statistical operations, using integers as an argument and returns.
What are Prime numbers?Prime numbers are defined as any number that is any integer with exactly two factors 1 and the number itself. is said to be a prime number.
Here is a function that takes an integer as an argument and returns True if it is a prime number, or False otherwise:
def is_prime(n):
if n < 2:
return False
for i in range(2, int(n ** 0.5) + 1):
if n % i == 0:
return False
return True
This function first checks if the number is less than 2, in which case it is not a prime number. If the number is 2 or greater, the function then iterates through the range of numbers from 2 to the square root of n (inclusive), checking if n is divisible by any of them. If n is divisible by any of these numbers, it is not a prime number and the function returns False. If the loop completes without finding a divisor, the function returns True.
To learn more about the prime number click here:
https://brainly.com/question/13665423
#SPJ12
your laptop is running windows 10. you notice a security message indicating that windows firewall has been disabled. the laptop is currently connected to your organization's network, and the domain network profile settings are in effect. you plan to travel this week and connect the laptop to various airport wi-fi hotspots. you need to enable windows firewall for any public network. in this lab, your task is to: turn on the windows firewall for the public network profile only. allow the following additional service and programs through the firewall for the public network profile only: a service named key management service an application named arch98 an application named apconf
Simply quitting the web browser or restarting the computer will delete it.
How can I stop the Windows Firewall pop-up warning from appearing? It can be eliminated by simply closing the browser (ideally through Task Manager) or restarting the computer (some malicious sites employ scripts that prevent users from closing the browser).The "Windows Firewall Protection Alert" bogus error message is a ruse designed to make you believe that your machine has crashed or that a virus has been discovered while actually being a scam from Microsoft.This is done to try to frighten you into calling one of the numbers provided for support.A form of malware called phishing, also known as malware that wants to trick you into contacting scammers, may appear on your screen while you're browsing as a Windows Defender security warning.To learn more about Firewall refer
https://brainly.com/question/13693641
#SPJ1
which of the following gestures would you use if you want to activate a mode that enables you to move an item with one finger to a new location on your new tablet?
On your new tablet, you can toggle on a mode that lets you move an object to a new spot only with one finger by swiping your finger across the screen.
What are gestures ?
A gesture is a visible body activity that conveys specific messages in place of or in addition to words. It is a type of nonverbal or non-vocal communication. Gestures might include the movements of the hands, face, or other body parts. Physical non-verbal communication like proxemics, purely expressive displays, or displays of shared attention are different from motions in that they convey specific messages. People can express a wide range of emotions and ideas through motions, from hostility and scorn to admiration and affection.
To know more about gestures
https://brainly.com/question/12115354
#SPJ4
devaki is a network engineer. she is diagnosing an issue with a small business customers wireless local area network (wlan). she knows the institute of electrical and electronics engineers (ieee) has created the standards involved in various network technologies. while wlan standards cover a wide array of subsets, which general standard does she need to consult that addresses all vlans?
Since Devaki is an engineer who is designing network security for her company's infrastructure. The type of protection is called option A; Defense in depth.
What does defense-in-depth mean in cybersecurity?The term Defense in Depth (DiD) is a term used to describe an information security strategy in which various security measures and controls are thoughtfully layered across a computer network to safeguard the privacy, availability, and integrity of the network and the data it contains.
Note that Defense in depth (DiD) is a cyber security tactic that employs a number of layered, redundant defensive measures to safeguard sensitive information, personally identifiable information (PII), and information technology assets. The following security layer prevents the potential cyberattack if one security measure fails.
Therefore, the term a defense-in-depth approach, also known as a security-in-depth approach, is a cybersecurity method that employs multiple layers of security for comprehensive protection. Organizations in the security industry can lessen vulnerabilities, contain threats, and manage risk by using layered defenses.
Learn more about Devaki From
https://brainly.com/question/29316552
#SPJ1
See full question below
Devaki is an engineer who is designing network security for her company's infrastructure. She is incorporating protections for programming flaws, default settings, maximum values, processing capabilities, and memory capacities on devices, as well as malicious code and social engineering. What is this type of protection called?
a) Defense in depth
b) Divide and conquer
c) Security through obscurity
d) Single point of failure avoidance
You are a cyber forensic specialist, and you are asked to retrieve the password of an employee account suspected of being an imposter. As you are provided with the enterprise's strong password policy, which of the following methods will be the easiest for you to use when retrieving the password? a. Brute force attack b. Dictionary attackc. Hybrid attack d. Rule attack
Since You are a cyber forensic specialist, and you are asked to retrieve the password of an employee account suspected of being an imposter, the method that will be the easiest for you to use when retrieving the password is option d. Rule attack.
What is dictionary attack?A kind of brute force attack where a hacker uses a "dictionary list" of terms and expressions that people and companies frequently use to try to break a password-protected security system is the term dictionary attack.
Note that Hashcat's rule-engine was created to be 100% compatible with John the Ripper and PasswordsPro rules and vice versa for all functions that share the same letter name. Later, we began introducing some of our own, incompatible functions. To avoid confusion, these functions were given their own letter names.
Therefore, based on the above, When an attacker is aware of the rules that a system's passwords are built on, such as "alphanumeric and eight characters long," they can target their password cracking technique.
Learn more about Rule attack from
https://brainly.com/question/29358198
#SPJ1
which term refers to a data obfuscation technique that replaces sensitive data with random data called a token?
Tokenization is the best solution to meet the requirement. Hence option A is correct.
What is database administration?Database administration is defined as the information technician responsible for overseeing and carrying out all tasks necessary to successfully manage a database environment. Their responsibilities include ensuring that a data management policy is followed and that these crucial pieces of technology remain operational.Tokenization is defined as a method by which a piece of sensitive information, like a credit card number, is replaced by a token-based substitute value. You can convert indivisible assets into token forms through tokenization.The token is a randomized data string that has no essential or exploitable value or meaning. It is a unique identifier which retains all the pertinent information about the data without compromising its securityIn some instances, tokens are created through the use of algorithms, such as hashing techniques. Whether personal information that has been tokenized is still considered “personal information” depends upon the particular law or regulation at issue.To learn more about technique refer to:
https://brainly.com/question/9979302
#SPJ4
how can computers and technology help in investigating a fraud? what kinds of challenges can the involvement of technology present to a case?
Today's computer forensic analysts can recover data that has been deleted, encrypted, or hidden within the folds of mobile device technology; they can be called to testify in court and relate the evidence discovered during investigations.
The computer forensic process:
A computer forensic examination is performed to recover data from computers that have been seized as evidence in criminal investigations. Experts examine evidence that may be presented in court during proceedings in a systematic manner. Forensic experts should be involved early in an investigation because they can assist in properly collecting technical material in a way that allows the content to be restored without compromising its integrity.
Many (or all) of the following steps can be included in forensic investigation efforts:
Collection entails the search for and seizure of digital evidence, as well as the acquisition of data.Examining entails using techniques to identify and extract data.Analysis is the process of using data and resources to prove a point.Reporting entails presenting the information gathered.To know more about computer forensic, visit: https://brainly.com/question/14405745?referrer=searchResults
#SPJ4
which type of software program is capable of reproducing itself as it spreads from one computer to another?
Worm is capable of reproducing itself as it spreads from one computer to another.
Which type of software that has self-replicating?A computer program known as a "worm" has hostile intentions and can duplicate itself, spread across a network, and do so with or without human assistance. Its goal is to covertly copy itself and insert itself onto other computers.As it travels from one computer to another, the worm has the ability to reproduce itself.Worms either employ social engineering to deceive people into executing them, or they exploit a flaw in the target system to spread. A worm gains access to a computer through a system flaw and uses the system's file-transport or information-transport features to roam unimpeded.Viruses can multiply themselves even when they are not standalone programs.To learn more about worm, refer to
https://brainly.com/question/23463888
#SPJ4
if you have to spare, please drop by my office. question 9 options: a) sometime b) some time c) sometimes
Answer:
B) Some time
Explanation:
Out of all of the answer options, option B) is correct here. Lets discuss why the other options don't work.
Option A uses the phrase "sometime". Using this spelling, the definition is "at some unspecified or unknown time"
Option C) uses the phrase "sometimes", which is defined as "occasionally, rather than all of the time"
We can use process of elimination to determine that B) is correct.
Using new technology, some insurers are offering customized rates for buyers who install equipment in their car that monitors speed, acceleration, distance traveled, and other factors. What problems are the insurance companies trying to solve?.
The difficulties that the insurance companies are aiming to address are moral hazard and adverse selection. B is the best choice as a result.
What is insurance?A party undertakes to ensure another party compensation in the event of a certain loss, damage, or injury in exchange for a fee as a way of financial loss protection. It is a method of risk management that is mostly applied to protect against the risk of a potential loss that may or may not occur.
It ensures the insured person obtains everything is legally required for them to regain their sanity and make decisions .A new beginning that makes up for all losses.
According to the theory of adverse selection, insurance buyers are more inclined to choose bad risks than good ones. Having insurance can change one's behavior, which is a phenomena known as moral hazard. If one had insurance, they might act carelessly.
Is insurance a useful thing?Because permanent life insurance can generate cash value or be converted into cash, depending on the type of policy and how it is used, it may be seen as a financial asset. In other words, the majority of permanent life insurance contracts have the capacity to accumulate monetary value over time.
Adverse selection and moral hazard are the issues that the insurance companies are attempting to address because only those who are confident in their ability to drive safely will buy this insurance.
As a result, choice B is suitable.
To learn more about insurance visit:
https://brainly.com/question/27822778
#SPJ4
a character in an opera needs to communicate information quickly. it's background information, needed to advance the plot. this would best be achieved through:
Opera currently allows users to sync their open tabs, preferences, and bookmarks between mobile and desktop browsers, but in the past, doing so required users to sign up for an account on each platform and sign in, or to utilize the more constrained "Opera Touch" app.
What is Opera?Opera currently allows users to sync their open tabs, preferences, and bookmarks between mobile and desktop browsers, but in the past, doing so required users to sign up for an account on each platform and sign in, or to utilize the more constrained "Opera Touch" app.
However, after installing the latest upgrades for Android and desktop, users can sync all of that data across devices using the core apps without logging in via a QR code.
The most recent Android and desktop versions of Opera offer two new cross-device sync techniques that make it even more easy without compromising user privacy, making it a great browser option for data privacy advocates.
Therefore, Opera currently allows users to sync their open tabs, preferences, and bookmarks between mobile and desktop browsers, but in the past, doing so required users to sign up for an account on each platform and sign in, or to utilize the more constrained "Opera Touch" app.
To learn more about opera, refer to the link:
https://brainly.com/question/1378985
#SPJ1
4. suppose a computer running tcp/ip (with ipv4) needs to transfer a 1024 bytes file to a host. a. [4 pts] how many megabytes, including all of the tcp/ip overhead, would be sent? assume a payload size of 64 bytes. b. [2 pts] what is the protocol overhead, stated as a percentage? c. [4 pts] how small would the overhead have to be in kb for the overhead to be lowered to 10% of all data transmitted?
The Transmission Control Protocol and Internet Protocol (TCP/IP) is a popular network protocol. TCP/IP packets feature a little amount of protocol overhead, typically between 40 and 80 bytes in each packet.
What megabytes, including all the overhead?The actual data payload is often between 46 and 1500 bytes. The headers, which make up the overhead regardless of the payload size, total 26 bytes: 7 bytes for the Preamble. One byte SOF (Start of Frame)
Therefore, TCP/IP packets feature a little amount of protocol overhead, typically between 40 and 80 bytes in each packet.
Learn more about TCP/IP here:
https://brainly.com/question/27742993
#SPJ1
Your site is dependent upon the use of the rlogin utility for remote access. For security reasons, you want to prevent the hosts in the marketing department from accessing the payroll server, but allow all others to do so. Which file should you use to create this restriction?
So to the hosts can be denied in the marketing department and to give access to other we have to use the file (hosts. deny)
What is meant by hosts deny?
The hosts. allow file is used in conjunction with hosts to determine whether to accept or deny a connection attempt. deny. The hosts. allow file is just a plain text configuration file with a simple syntax.
So to the hosts can be denied in the marketing department and to give access to other we have to use the file hosts. deny
What is meant by hosts deny?
The hosts. allow file is used in conjunction with hosts to determine whether to accept or deny a connection attempt deny. The hosts. allow file is just a plain text configuration file with a simple syntax.
Essentially, hosts
Deny, which we also employ here when configuring hosts, is just the act of denying the undesired source in a common language.
Deny is used to stop the marketing division from using the server and instead assigns another as the host.
allow
Thus hosts. deny is used in this case
To know more about remote access follow this link:
https://brainly.com/question/29032807
#SPJ4