treatment of the following stereoisomer of 1-bromo-1,2-diphenylpropane with sodium ethoxide in ethanol gives a single stereoisomer of 1,2-diphenylpropene. draw the e2 elimination product of the reaction. take into account that the starting stereochemistry affects the resulting double bond stereochemistry.

The amount of alkyl groups connected to the positive carbon, the degree of substitution on the positive carbon, and the presence of electron-donating or electron.

withdrawing groups all influence the stability of carbocations. Carbocation (C)  CH3CH2CH2+ is thought to be more stable than carbocation (B) (CH3)3C+ based on these reasons. This is due to the fact that carbocation (C) contains three alkyl groups connected to the positive carbon, converting it to a tertiary carbocation, which is more stable than a secondary carbocation (B). In addition, carbocation (D) CH3 CH+ CH2CH3 is thought to be more stable than carbocation (C) CH3CH2CH2+. This is due to the fact that the positive carbon in carbocation (D) is surrounded by both methyl and ethyl groups, converting it to a tertiary allylic carbocation, which is much more stable.

learn more about carbon  here:

https://brainly.com/question/22530423

#SPJ4

The density of the iron plate in g/cm³, given that it has a mass of 25.0 Kg and a volume of 3180 cm³ is 7.86 g/cm³

The density of a material is defined as the mass of the material per unit volume of the material. This is written as:

Density = mass / volume

Using the above formula, we can obtain the density of the iron plate as illustrated below:

Density = mass / volume

Density of iron plate = 25000 / 3180

Density of iron plate = 7.86 g/cm³

Thus, from the above calculation, we can conclude that the density of the iron plate is 7.86 g/cm³

Learn more about density:

https://brainly.com/question/952755

#SPJ1

Answer:

Beer's law (sometimes called the Beer-Lambert law) states that the absorbance is proportional to the path length, b, through the sample and the concentration of the absorbing species, c: A α b · c. The proportionality constant is sometimes given the symbol a, giving Beer's law an alphabetic look: A = a · b · c.

Explanation:

I found some useful info for you. Hope it helps! Great to be of service to you! ⚔

Reduction is an activity to reduce something. In chemistry there is also a reduction reaction that is related to the oxygen content of a substance.

When a reduction reaction occurs, the substance will experience an increase in electrons, making it more negative. The following are examples of reduction reactions that occur in everyday life:

In the extraction of iron oxide (iron ore) is reduced to remove the oxygen in it. This is done to obtain pure iron (Fe) with the help of carbon monoxide (CO) as a reducing agent.

Copper purification reaction using a voltaic cell. Where Cu2+ ions will undergo a reduction reaction with a reducing agent in the form of magnesium to produce a precipitate of pure copper (Cu). From the reaction it can be seen that Cu has increased by 2 electrons so that its charge becomes neutral.

According to Chemical Equations, this reaction is a reaction between magnesium (Mg) powder and black copper (II) oxide (CuO) powder to produce pure copper (Cu) and white magnesium oxide (MgO) powder.

Learn more about reduction at

https://brainly.com/question/28813812.

#SPJ4

Histidine was unique among amino acids in that it could exist in neutral or positively charged states inside the functional pH range of 5.0 to 7.0.

As a result, histidine may interact with the other aromatic residues and establish hydrogen bonds between polar but also charged residues.

Histidine seems to be a semi-essential amino acid (which children should get from food) that's also required in humans for growth as well as tissue repair. It is also essential for the preservation of myelin sheaths which protect nerve fibers and therefore is metabolized towards the neurotransmitter histamine.

Histamines perform a variety of roles in immune function, gastrointestinal secretion, as well as sexual function. Histidine too is essential for the production of blood cells and protects tissues from harm due to radiation as well as heavy metals.

Thus, the correct answer is (B)

The question is incomplete, the complete question is :

Below is the amino acid histidine at pH 7. Select all the atoms that are part of a plane of three or more atoms.

To know more about Histidine

https://brainly.com/question/29718665

#SPJ4

The formula for iron(II) phosphide is Fe₂P.

This is a term used in chemistry which is used to identify each constituent element by its chemical symbol and indicates the proportionate number of atoms of each element.

In this scenario, the chemical compound of iron and phosphorus, with a formula of Fe₂P and it has a physical appearance is grey, hexagonal needles which is formed from the reaction between the elements Iron and phosphorus at an elevated or high temperature and the product which is formed is a phosphorylated molecule thereby making it the most correct choice.

Read more about Iron phosphide here https://brainly.com/question/1995376

#SPJ1

The density would be 0.5929 g/cm3.

The density of an object is the ratio of the mass of the object to its volume.

This can be expressed mathematically as: Density = mass/volume

In this case, the dimension of the object is 20.8 cm x 5.3 cm x 4.4 cm. Thus, the volume of the object would be:

20.8 x 5.3 x 4.4 = 485.056 cm3

The mass of the object is given as 287.57 g.

Thus, density of the object = 287.57/485.056 =

In other words, the density of the object would be 0.5929 g/cm3

More on density can be found here: https://brainly.com/question/29775886

#SPJ1

It is a double displacement reaction since new products are produced by displacement both reaction molecules Ca +  AlCl₃ → Cacl₂ + Al

2. AgNo₃ + MgCl₂ → AgCl + Mg(NO₃)₂

   3. H₃PO₄ + NaOH   →   Na₃PO₄ + H₂O

4. Zn + AgCl       →       ZnCl₂ + Ag

  5. H₂SO₄ + NaCN    →  Na₂SO₄ + HCN

6. HClO₃ + Ca(OH)₂ →   Ca(ClO₃)₂ + H₂O

    7. FeO + Cl₂    →      FeCl₂ + O₂

8. BaO + H₂O  →      Ba(OH)₂ + H₂O

9. Mg + HBr     →      MgBr₂ + H₂

10. NO +Cl₂     →      NOCl

When atoms establish or break chemical bonds, chemical processes take place. Reactants are the substances that begin a chemical reaction, while products are the compounds that are created as a result of the reaction. A chemical change is the transformation of one substance into another, the emergence of new compounds with distinct properties, or any combination of these. It happens when two compounds mix to create a new material (synthesis or either decomposes to form more substances).

When atoms establish or break chemical bonds, chemical processes take place. Reactants are the substances that start a chemical reaction, while products are the substances that come out of the process.

Learn more about Chemical reaction :

brainly.com/question/25769000

#SPJ1

The mass of Dichloromethane used in the above reaction has a similar density throughout the reaction.

The density and mass concentration of a pure substance is numerically equivalent. Density can affect buoyancy, purity, and packing. Varied materials typically have different densities. At normal temperatures and pressures, osmium and iridium have the highest densities of any known elements.

mass is occasionally substituted by the dimensionless quantity "relative density" or "specific gravity," i.e. the ratio of the material's density to that of a standard material, typically water, to make density comparisons across different systems of units easier. In other words, if a substance's relative density is less than one in relation to water, it floats.

Temperature and pressure affect a substance's density.

We know that density will be the same throughout mixing.

Hence, density = mass/ volume

now comparing density for both the condition we get

33.13 / 25= mass / 252.5

Mass = 33461 g

To learn more about Density from the given link

https://brainly.com/question/29775886

#SPJ1

The molar heat of solution of AICI₃ is 56.8 kJ/mol.

To determine the molar enthalpy of the solution, we can use the equation:

q = mcΔT

where q is the heat absorbed or released by the solution, m is the mass of the solvent (in this case, water), c is the specific heat of the solvent, and ΔT is the change in temperature of the solution.

Calculate the heat absorbed or released by the solution using the equation:

q = mcΔT

q = (10 g) (4.18 J/g·°C) (250 - 46.3)

q = 8526.882 J

Then we can calculate the number of moles of solute using the molar mass of the solute:

n = m / M

n = (20 g) / (133.34 g/mol)

n = 0.15 mol

Finally, use this value of n to calculate the molar enthalpy of solution using the formula:

ΔH = (q / n)

Where n is the number of moles of solute (AlCl₃) and ΔH is the molar enthalpy of solution.

ΔH = (8526.882 J) / (0.15 mol)

ΔH = 56845.88 J/mol

ΔH = (56845.88 J/mol)(1 kJ/1000 J)

ΔH = 56.8 kJ/mol

Hence, the molar heat of solution is 56.8 kJ/mol (3 sig figs).

Learn more about molar enthalpy of solution here: https://brainly.com/question/11628413

#SPJ4

The chemical compound Barium Carbonate (BaCO3) is composed of one Barium atom (Ba), one Carbon atom (C) and three Oxygen atoms (O3). Therefore, the number of carbon atoms in Barium Carbonate is 1.

The compound Barium Carbonate has 1 carbon atom.

The chemical formula for Barium Carbonate is BaCO3, which means it contains 1 atom of Barium (Ba), 1 atom of Carbon (C), and 3 atoms of Oxygen (O). Therefore, the compound Barium Carbonate has 1 carbon atom.

For more information on Carbon atoms in Barium Carbonate:

https://brainly.com/question/29822909

The four quantum numbers that identify the highest energy electron in a francium, fr, atomic orbital are n, ℓ, m, and s.

The energy levels of an atom are connected by a set of quantum numbers. The entire and singular quantum state of a single electron in an atom, also known as its wave function or orbital, is described and explained by the four quantum numbers, n, l, m, and s. Accordingly, the four quantum numbers are n, l, m, and s.

The quantum number is used to define the location of electrons, and an orbital is a place inside the atom where an electron can be found. The quantum number of the shell orbitals of an atom depends on the number of electron shells it contains.

Learn more about quantum here: brainly.com/question/5927165

#SPJ4

Ascorbic acid will not interfere with the reagent strip test for leukocytes.

Ascorbic acid, often known as vitamin C, is an organic molecule that occurs naturally. It is a water-soluble vitamin that is necessary for the immune system to operate properly, for the skin to produce collagen, and for the body to absorb iron.

Because ascorbic acid cannot be detected by the test. Leukocyte reagent strip tests often involve the use of a particular chemical reagent, such as nitrofurantoin or esculin, which reacts with the enzymes contained in leukocytes to generate a noticeable color shift.

Ascorbic acid does not react with the reagent used in the test because it does not share the same chemical characteristics as leukocytes.

Which of the following factors will not interfere with the reagent strip test for leukocytes?

A) ascorbic acid

B) formaldehyde

C) nitrite

D) urinary protein level of 500 mg/dL

To know more about ascorbic acid, visit:

brainly.com/question/13961146

#SPJ4

When a proton is coupled to two different neighboring proton sets with identical or very close coupling constants.

Define unique atoms?

To learn more about atoms refers to:

https://brainly.com/question/17545314

#SPJ4

Answer:

endothermic reaction; need more info on the reactants to answer the other questions

Explanation:

Given the change in bond energy of 187 kJ/mol, you can determine whether the reaction is endothermic or exothermic. If the bond energy is positive, the reaction is endothermic, meaning it absorbs energy. If the bond energy is negative, the reaction is exothermic, meaning it releases energy. In this case, the bond energy is positive so it's an endothermic reaction.

Ethanol (C2H6O), an alcohol has a much higher boiling point than dimethyl ether (C2H60) because hydrogen bonds found in the former are typically much stronger attractions than ordinary dipole moments in the latter.

This is referred to as the temperature at which the vapor pressure of a liquid equals the pressure surrounding the liquid and the liquid changes into a vapor.

Ethanol (C2H6O), an alcohol has a much higher boiling point than dimethyl ether (C2H60) because hydrogen bonds have a stronger attraction which  makes it more difficult for the atoms to be broken down hence the reason why the boiling point will be higher in this scenario.

Read more about Boiling point here https://brainly.com/question/24675373

#SPJ1

a) The pH of the solution is 2.11

b) The pH of the solution is 2.96

c) The [H+] of the solution is 1.69 * 10^-8

d) The  [OH−]  of the solution is  7.1 * 10^-3

What we call the pH of the solution is the negative logarithm of the hydrogen ion concentration of the solution. In this case, we have been asked to obtain the pH of the solution at different points.

a) pH = -log (0.0078 )

= 2.11

pOH = 14 - 2.11 = 11.89

[OH−] = Antilog (-11.89)

= 1.3 * 10^-12

b) pH = -log (0.0011)

= 2.96

pOH = 14 - 2.96

= 11.04

[OH−] = Antilog (-11.04)

= 9.1 * 10^-12

c) [H+] = Antilog (-7.77)

= 1.69 * 10^-8

[OH−]  = 1 * 10^-14/1.69 * 10^-8

= 5.9 * 10^-7

pOH = -log( 5.9 * 10^-7)

= 6.22

d)  [OH−] = Antilog (-2.15)

= 7.1 * 10^-3

[H+]  = 1 * 10^-14/ 7.1 * 10^-3

= 1.41 * 10^-12

pH = -log( 1.41 * 10^-12)

= 10.9

Learn more about pH:https://brainly.com/question/15289714

#SPJ1

The pairs has been identified as lone or localized, N is a lone pair and NH₂ is localized.

Isoniazid, also known as nydrazid, is a popular antibiotic used to treat and prevent tuberculosis and other illnesses. For specific forms of tremor in multiple sclerosis (MS), isoniazid is administered. Usually, substantial dosages of the antibiotic (600–1200 mg daily) are needed to treat MS tremors. To avoid contracting active TB disease, you can take medication. The medications Isoniazid and Rifapentine (INH-RPT) are combined to treat LTBI. They eliminate the dormant tuberculosis bacteria before you become unwell. The TB bacteria are powerful and can be killed by the medication over several months. Isoniazid is used to treat or prevent tuberculosis (TB) (reactivation). It can be used either on its own or in conjunction with other medications to cure TB or stop it from coming back (reactivation).

To learn more about isoniazid click here

brainly.in/question/18176701

#SPJ4

The balanced redox reaction equation is written as;

[tex]2Cr_{2} O_{7} ^{2-} + 6Fe^{2+} +14H^+----- > 2Cr^{3+} + 6Fe^{3+} + 7H_{2} O[/tex]

We know that when we talk about the redox reaction, one of the species in the reaction has been oxidized while one of the species in the reaction has been reduced. As such, there would be a loos and gain of electrons in the process.

In this case, we can see that we have to write down the reaction equation and then we can be able to obtain the balanced reaction equation which would show the electrons that have been lost or gained.

Learn more about redox reaction:https://brainly.com/question/13293425

#SPJ1

1.) Chemist needs 79.02 g of KMnO4 to make 4.00 L of a 0.50 M solution. 2.)  You will need to use 0.12 L of 1.50 M solution to make 2.40 L of 0.0750 M solution. 3.) Solution has a molality of 0.00229 mol/kg.

Molality is defined as a measure of number of moles of solute in a solution corresponding to 1 kg or 1000 g of solvent.

1.) As, mass = moles x molar mass

Molar mass of KMnO4 is 158.03 g/mol

So, mass = 0.50 mol x 158.03 g/mol = 79.02 g

Therefore, the chemist needs 79.02 g of KMnO4 to make 4.00 L of a 0.50 M solution.

2.)As , C1V1 = C2V2

Here C1 is initial concentration, V1 is initial volume, C2 is final concentration and V2 is the final volume.

1.50 M x V1 = 0.0750 M x 2.40 L

Now, V1 = (0.0750 M x 2.40 L) / 1.50 M

So, V1 = 0.12 L

You will need to use 0.12 L of the 1.50 M solution to make 2.40 L of the 0.0750 M solution.

3.) Formula for molality is: m = (moles of solute) / (kg of solvent)

As, moles = (mass of solute) / (molar mass of solute)

= (20 g) / (58.44 g/mol) = 0.344 mol

m = (0.344 mol) / (150 g / 1000 g/kg) = 0.00229 mol/kg

So, the solution has a molality of 0.00229 mol/kg.

To know more about molality, refer

https://brainly.com/question/1370684

#SPJ1

propose five combinations of aqueous ionic reagents that likely would form a precipitate when they are mixed NaCl + AgNO3 (aq) (aq) CaCl2 (aq) + Na3PO4 (aq) CuSO4 (aq).

+ Zn(NO3)2 BaCl2 (aq) + Na2SO4 (aq) (aq) KI + Pb(NO3)2 (aq) (aq) Silver chloride (AgCl) precipitates from sodium chloride (NaCl) and silver nitrate (AgNO3). Lead (II) nitrate (Pb(NO3)2) and potassium iodide (KI) combine to generate lead (II) iodide (PbI2). Copper (II) sulfate (CuSO4) and sodium hydroxide (NaOH) combine to generate copper (II) hydroxide (Cu(OH)2).Aluminum chloride (AlCl3) reacts with sodium hydroxide (NaOH) to generate aluminum hydroxide (Al(OH)3). Barium chloride (BaCl2) and sodium sulfate (Na2SO4) react to generate barium sulfate (BaSO4).and silver nitrate (AgNO3). Lead (II) nitrate (Pb(NO3)2) and potassium iodide (KI) combine to generate lead (II) iodide (PbI2). Copper (II) sulfate (CuSO4) and sodium hydroxide (NaOH) combine to generate copper (II) hydroxide .

learn more about Copper  here:

https://brainly.com/question/13677872

#SPJ4

A surfer rides an ocean wave is fluid friction

A bowling ball travels down a bowling lane rolling friction

A baseball flies through the air is air resistance

A hose rests on the edge of a truck is static friction.

Friction is described as the force resisting the relative motion of solid surfaces, fluid layers, and material elements sliding against each other.

Static friction is that force that keeps an object at rest.

It is that  friction experienced when individuals try to move a stationary object on a surface, without actually triggering any relative motion between the body and the surface on which it is on.

Learn more about  friction at: https://brainly.com/question/24338873

#SPJ1

Complete question:

dentify the type of friction acting in each scenario.

A surfer rides an ocean wave.

A bowling ball travels down a bowling lane.

A baseball flies through the air.

A hose rests on the edge of a truck.

OPTIONS:

air resistance

fluid

rolling

sliding

static

The species would be the best choice if a chemist needs a substance that is more effective in its reducing ability = Na (option A)

An element's reducing ability is defined as its ability to lose electrons. It assists the other element in gaining electrons and thus functions as a reducing agent.

The substance with the highest positive reduction potential is always reduced and undergoes a reduction reaction. Alternatively, the substance with the highest negative reduction potential will always be oxidized and undergo an oxidation reaction.

Elemental sodium is a good reducing agent because it belongs to group I, and elements in group I have one electron in their valence sheet. As a result, they readily lose 1 electron to achieve noble gas configuration, undergoing oxidation (i.e. electron loss) and acting as a good reducing agent.

The standard reduction potential of sodium will be:

Na ⇒ Na⁺ + e⁻

E⁰ Na⁺ / Na = -2.71 V

Learn more about reducing substance here: https://brainly.com/question/7484765

#SPJ4

Giving the right relative importance of the bases and acids used in the reaction is H2PO4 > H2BO3 and HBO32 > HPO42.

A chemical that produces salts and release hydronium ions into water when it reacts with any of these metals. Acids have one sour taste and give some colours a reddish tint. Chemicals taste acidic whenever dissolved in water and conduct electricity, and combine with metals to produce oxygen and hydrogen. Litmus is one indicator compound that can be used to identify acids. Acids cause the blue litmus material to turn red. One type of acid is sodium hydroxide.

For example, pure sulfuric acid has a shocking pH of -12 while nitric acid has a pH of 1.08 and bleach has a pH of 1.6. So, the strongest "regular" acid you will encounter is weakly acidic.

To know more about acid visit:

https://brainly.com/question/29796621

#SPJ4

The material with the highest surface tension is the one that can hold the most drips on a penny. So, [tex]HF[/tex] is the correct answer.

It behaves as though its surface were an elastic membrane because of a liquid quality. The The strength of this membrane-like activity increases with a liquid's surface tension. Because of this, a liquid with a high surface tension will favor taking the shape of an object with a limited surface area. This explains why a high surface tension liquid develops into a more compact shape, allowing for the placement of more droplets on the coin, as opposed to a low surface tension liquid. In other words, the amount of droplets that can fit on a penny depends on the surface tension of the liquid.

A penny can hold the most drops on the substance with the highest surface tension. A liquid's surface's elastic tendency to reduce surface area is referred to as surface tension. As the most electronegative element, fluorine creates stronger hydrogen bonds, which contribute to higher surface tension.

To know more about surface tension:

brainly.com/question/28146435

#SPJ4

The complete question is:

On the surface of a penny, liquid droplets are put as part of an experiment. Assuming all are in the liquid phase, which of the following substances would you expect to be able to place the maximum number of drops of on the surface of the penny?

a) [tex]HF[/tex]

b) [tex]H_2O[/tex]

c) [tex]CH_3CH_2CHO[/tex]

d) [tex]CCl_4[/tex]

The reaction stops because the reaction is a decomposition reaction.

We have to note that there is a reaction when there is change of the reactants that are in the system to the products. We have to note that in this case. we have the decomposition of the mercury oxide.

Since it is a decomposition reaction, we can see that there is a break down of the mercury oxide to give rise to the oxygen and to the mercury as such if we remove the mercury oxide the reaction stops.

Learn more about reaction:https://brainly.com/question/28984750
#SPJ1

In contrast to the worldwide recycling of chemical elements, energy travels via ecosystems.

An ecosystem is a region where a bubble of life is created by plants, animals, and other organisms interacting with the weather, environment, and other factors. Abiotic variables, or nonliving components, coexist with biotic components in ecosystems.

The food chain and food web are used to transfer energy. Plants, who are the primary energy providers in the ecosystem, use their chloroplasts to collect sunlight, which is then partially converted into chemical energy during photosynthesis.

Joules or calories are used to measure the energy input, or the energy that enters the environment. As a result, the energy flow is sometimes referred to as the calorific flow.

To know about ecosystem

https://brainly.com/question/13979184

#SPJ4

Answer:

E. Refraction, reflection, and diffraction of light are essential in the formation of a rainbow.

According to the information provided, it is stated that the sun is always at your back when observing a rainbow, and that the time of day can indicate whether a shower is approaching or departing. This suggest that the formation of the rainbow is dependent on the position of the sun and the presence of water droplets in the air, which are refracted, reflected, and diffracted by the light from the sun. It doesn't indicate anything about the color intensity or dimension of the rainbow, nor whether it always occurs at the end of a powerful storm or when the sun is setting.

Answer:

58.44277 gram

Explanation:

This difference in ligand strength causes the two complexes to absorb different wavelengths of light, resulting in different colors.

To learn more about the ligand field theory refer to:

https://brainly.com/question/11856948

#SPJ1