translate the sum of x and one half of x into a mathematical expression

Answer:

In terms of construction, copying a line segment and an angle requires a fixed compass width as a basic tool

Step-by-step explanation:

The basic similarity is in both constructions, or copies is that we are going to use the same compass width in each case as the basic tool to copy a line segment or an angle.

hope this helpes

be sure to give brainliest

Answer:

An angle is form by two rays and the two line segment share a common points and we utilize a straightedge for drawing the comparative figure on paper.

At that point, utilize the straightedge and the compass used to copy this type of figure precisely. To duplicate the given figure, we should copy line as well as angle.

The line of segment are basically formed by adjusting the compass and makes it equal to the line segment length and then copy each point in the figure.

━━━━━━━☆☆━━━━━━━

▹ Answer

Area = 9

▹ Step-by-Step Explanation

A = b * h ÷ 2

A = 9 * 2 ÷ 2

A = 9

Hope this helps!

- CloutAnswers ❁

Brainliest is greatly appreciated!

━━━━━━━☆☆━━━━━━━

Answer:

246000 in scientific notation is 2.46e5, or 2.46 x 10^5

Step-by-step explanation:

246000, move the decimal place 5 places to the left.

2.4x10^5

Answer:

2.46 × 10⁵

Step-by-step explanation:

The decimal point is after the first non-zero digit.

⇒ 2.46

Multiply the number with base 10 and an exponent which will equal to 246,000.

⇒ 10⁵

Answer:

Step-by-step explanation:

Given the 3* 3 matrices [tex]\left[\begin{array}{ccc}0&4&1\\5&-3&0\\2&3&1\end{array}\right][/tex], to compute the determinant using the first row means using the row values [0 4 1 ] to compute the determinant. Note that the signs on the values on the first row are +0, -4 and +1

Calculating the determinant;

[tex]= +0\left[\begin{array}{cc}-3&0\\3&1\\\end{array}\right] -4\left[\begin{array}{cc}5&0\\2&1\\\end{array}\right] +1\left[\begin{array}{cc}5&-3\\2&3\\\end{array}\right] \\\\= 0 - 4[5(1)-2(0)] +1[5(3)-2(-3)]\\= 0 -4[5-0]+1[15+6]\\= 0-20+21\\= 1[/tex]

The determinant is 1 using the first row as co-factor

Similarly, using the second column [tex]\left[\begin{array}{c}4\\-3\\3\end{array}\right][/tex] as the cofactor, the determinant will be expressed as shown;

Note that the signs on the values are -4, +(-3) and -3.

Calculating the determinant;

[tex]= -4\left[\begin{array}{cc}5&0\\2&1\\\end{array}\right] -3\left[\begin{array}{cc}0&1\\2&1\\\end{array}\right] -3\left[\begin{array}{cc}0&1\\5&0\\\end{array}\right] \\\\= -4[5(1)-2(0)] - 3[0(1)-2(1)] -3[(0)-5(1)]\\= -4[5-0] -3[0-2]-3[0-5]\\= -20+6+15\\= -20+21\\= 1[/tex]

The determinant is also 1 using the second column as co factor.

It can be concluded that the same value of the determinant will be arrived at no matter the cofactor we choose to use.

Answer:

3.072km

Step-by-step explanation:

[tex]3072m*(\frac{1km}{1000m} )=3.072km[/tex]

Answer:

Its 2.4, glad to help ya out!

Step-by-step explanation:

Remember v/pi times r squared

Answer:

Validation

Step-by-step explanation: Validation is a term used to describe the processes involved when we compare a set of values and observations against a set standard or rules to ensure that they meet certain expectations or criteria.

Validation is meant to prove that something, a data set etc are acceptable based on known rules, the rules or standards which is used to evaluate what can be described as valid.

Answer:

[tex]\boxed{Costing Price = $675}[/tex][tex]\boxed{Costing Price = $675}[/tex]Costing Price = $675

Step-by-step explanation:

Selling Price = $432

Discount = 36% of the costing price (36/100 * CP)

Then, Costing Price:

Let costing price be x

=> x - 0.36 x = 432

=> 0.64 x = 432

Dividing both sides by 0.64

=> x = $675

So, the costing Price is $675

Answer:

Probability = 0.10565

Step-by-step explanation:

Given:

Mean, u = 2

x = 2.5

CV = 20% = 0.2

To find standard deviation [tex] \sigma[/tex] use the formula:

[tex] CV = \frac{\sigma}{u} [/tex]

[tex] 0.2 = \frac{\sigma}{2} [/tex]

[tex] \sigma = 0.2 * 2 [/tex]

[tex] \sigma = 0.4 [/tex]

Find Z, using the formula:

[tex] Z = \frac{x - u}{\sigma} [/tex]

[tex] Z = \frac{2.5 - 2}{0.4} [/tex]

[tex] Z = \frac{0.5}{0.4} [/tex]

[tex] Z = 1.25 [/tex]

Using the p value table,

P(x > 1.25) = 0.10565

Therefore, The probability that this building will settle more than 2.5 inches is 0.10565

Answer:

should be - 8

Step-by-step explanation:

-2*-2=4 4*-2=-8

Answer:

Sandy should have evaluated (negative 2) cubed as –8.

Step-by-step explanation:

Got it right on the test

Answer:

33% probability that a man in this age group is under 180 pounds

Step-by-step explanation:

When the distribution is normal, we use the z-score formula.

In a set with mean [tex]\mu[/tex] and standard deviation [tex]\sigma[/tex], the zscore of a measure X is given by:

[tex]Z = \frac{X - \mu}{\sigma}[/tex]

The Z-score measures how many standard deviations the measure is from the mean. After finding the Z-score, we look at the z-score table and find the p-value associated with this z-score. This p-value is the probability that the value of the measure is smaller than X, that is, the percentile of X. Subtracting 1 by the pvalue, we get the probability that the value of the measure is greater than X.

In this question:

[tex]\mu = 202.3, \sigma = 50.7[/tex]

Find the probability that a man in this age group is under 180 pounds if it is known that the distribution is approximately normal.

This is the pvalue of Z when X = 180.

[tex]Z = \frac{X - \mu}{\sigma}[/tex]

[tex]Z = \frac{180 - 202.3}{50.7}[/tex]

[tex]Z = -0.44[/tex]

[tex]Z = -0.44[/tex] has a pvalue of 0.33

33% probability that a man in this age group is under 180 pounds

Answer: -8

Step-by-step explanation: If he scored -2 four times then his score would be -8 (-2×4).

Answer:

We can find the critical value [tex]t_{\alpha/2}[/tex]

And for this case if the confidence increase the critical value increase so then this statement is True

Step-by-step explanation:

For a confidence level given c, we can find the significance level like this:

[tex] \alpha=1 -c[/tex]

And with the degrees of freedom given by:

[tex] df=n-1[/tex]

We can find the critical value [tex]t_{\alpha/2}[/tex]

And for this case if the confidence increase the critical value increase so then this statement is True

Answer:

The area formula of a triangle is (base * height) / 2 and the area of a square is s² where s is the length of one side.

Answer:

sorry but are you dyin why do u need help why do you need someone to save you just say i need answers to this equation pls

Answer:

Option C is correct.

The discriminant of the function is negative since the function doesn't have real roots as evident from the graph.

Step-by-step explanation:

The discriminant of a quadratic equation is the part of the quadratic formula underneath the square root symbol, that is, (b² - 4ac).

The discriminant tells us whether there are two solutions, one solution, or no solutions.

- When the discriminant is positive or greater than zero, that is, (b² - 4ac) > 0, the quadratic function has 2 real distinct roots.

- When the discriminant is equal to zero, that is, (b² - 4ac) = 0, the quadratic function has 1 repeated root.

- When the discriminant is negative or lesser than zero, that is, (b² - 4ac) < 0, the quadratic function has no real roots.

For this question, the graph of the quadratic function shows that it doesn't have real roots (this is evident because the graph doesn't cross the x-axis), hence, the duscriminant of this quadratic function has to bee negative.

Hope this Helps!!!

Answer:

x = -1, y = 7

Step-by-step explanation:

8x + 3y = 13

3x + 2y = 11

Multiply the first equation by -2 and the second equation by 3. Then add them.

     -16x - 6y = -26

(+)     9x + 6y = 33

--------------------------

       -7x         = 7

x = -1

Now substitute x = -1 in the first original equation and solve for y.

8x + 3y = 13

8(-1) + 3y = 13

-8 + 3y = 13

3y = 21

y = 7

Answer: x = -1, y = 7

Answer:

(4, 26)

(-6, -24)

Step-by-step explanation:

Step 1: Substitution

5x + 6 = x² + 7x - 18

Step 2: Move everything to one side

0 = x² + 2x - 24

Step 3: Factor

(x - 4)(x + 6) = 0

Step 4: Find roots

x = 4, -6

Step 5: Plug in x to find y

y = 5(4) + 6

y = 20 + 6

y = 26

y = 5(-6) + 6

y = -30 + 6

y = -24

Answer:

true

Step-by-step explanation:

doesn't over lap each other

The correct answer is D. Eleanor has collected 20 action figures. She plans to collect 2  additional figures per month

Explanation:

The purpose of using an equation is to express mathematically a situation or relation. This involves understanding accurately how factors or numbers relate. According to this, the equation y = 2x + 20 fits with the situation described in D because this equation can be used to calculate the number of books Eleanor has as y is the total; 2 is the number of new books per month; x the number of months; and 20 books Eleanor already has.

Also, the number of months is multiplied by 2, and this is added to 20 which equals the total number of books. For example, after three months the total of books would be 26 considering y (total of books) = 2 x 3 (months) + 20 ⇒ 26 books.

Answer:

There is enough paint to cover the tank with one layer of paint.

Step-by-step explanation:

Given the cilindrical configuration of the tank and supposing that only external face must be painted, the surface area of the section (lateral wall + lid) can be calculated by the following expression:

[tex]A_{s} = 2\pi\cdot r\cdot h + \pi\cdot r^{2}[/tex]

Where [tex]r[/tex] and [tex]h[/tex] represent the radius and the height of the cube, respectively.

If [tex]r = 0.55\,m[/tex] (a diameter is two times the length of radius) and [tex]h = 1.4\,m[/tex], the intended surface area is:

[tex]A_{s} = 2\pi\cdot (0.55\,m)\cdot (1.1\,m)+\pi\cdot (0.55\,m)^{2}[/tex]

[tex]A_{s} \approx 4.751\,m^{2}[/tex]

It is known that 250 mL of paint are needed to cover a square meter of the surface area, the needed amount of paint to cover the required area is estimated by simple rule of three:

[tex]Q = \frac{4.751\,m^{2}}{1\,m^{2}}\times (250\,mL)[/tex]

[tex]Q = 1187.75\,mL\,(1.188\,L)[/tex]

In consequence, there is enough paint to cover the tank with one layer of paint.

Answer: d) 95 degrees

Step-by-step explanation:

To find this solution, simply subtract -20 from 75, to get 95.  In reality, you would take the absolute value of one temperature - another, but all you need to remember is to always subtract the smaller temperature from the larger.

Answer:

95 degrees(answer d)

Step-by-step explanation:

when you have a negative temp. and a positive temp., you add the two numbers to find the difference.

that means, 20+75=95 degrees(take away the negative sign when adding only.)

That means the difference between the two temperatures is 95 degrees.

Answer:

B

Step-by-step explanation:

Took the test edge2021

The function g(x) = 4(x + 3)² - 68 is the function which is mapped to 32 at x = 2 option (B) g(x) = 4(x + 3)² - 68 is correct.

It is defined as a special type of relationship, and they have a predefined domain and range according to the function every value in the domain is related to exactly one value in the range.

We have:

A function which is at x = 2 mapped to 32

The above statement means that at x = 2

The value of the function will be 32

The given functions:

f(x) = -3x² - 4

Plug x = 2

f(2) = -3(2)² - 4

f(2) = -16

g(x) = 4(x + 3)² - 68

Plug x =2

g(2) = 4(2 + 3)² - 68

g(2) = 100 - 68

g(2) = 32

Thus, the function g(x) = 4(x + 3)² - 68 is the function which is mapped to 32 at x = 2 option (B) g(x) = 4(x + 3)² - 68 is correct.

Learn more about the function here:

brainly.com/question/5245372

#SPJ6

Answer:

A=0.25

B=0.35

C=1.05

Step-by-step explanation:

1. A+B=0.6

2. A+C=1.3

3. C=3B

2 subtract 1:

3 substituted:

Answer:

[tex]0.0553 - 1.96\sqrt{\frac{0.0553(1-0.0553)}{380}}=0.0323[/tex]

[tex]0.0553 + 1.96\sqrt{\frac{0.0553(1-0.0553)}{380}}=0.0783[/tex]

Step-by-step explanation:

The info given is:

[tex] X= 21[/tex] number of students who said that they planned to work in a rural community

[tex] n= 380[/tex] represent the sample size selected

[tex]\hat p =\frac{21}{380}= 0.0553[/tex] the estimated proportion of students who said that they planned to work in a rural community

In order to find the critical value we need to take in count that we are finding the interval for a proportion, so on this case we need to use the z distribution. Since our interval is at 95% of confidence, our significance level would be given by [tex]\alpha=1-0.95=0.05[/tex] and [tex]\alpha/2 =0.025[/tex]. And the critical value would be given by:

[tex]z_{\alpha/2}=-1.96, z_{1-\alpha/2}=1.96[/tex]

The confidence interval for the mean is given by the following formula:  

[tex]\hat p \pm z_{\alpha/2}\sqrt{\frac{\hat p (1-\hat p)}{n}}[/tex]

Replpacing we got:

[tex]0.0553 - 1.96\sqrt{\frac{0.0553(1-0.0553)}{380}}=0.0323[/tex]

[tex]0.0553 + 1.96\sqrt{\frac{0.0553(1-0.0553)}{380}}=0.0783[/tex]

A mean for estimation is the minimum-maximum variation estimate's C.I. The % of pupils planning to work in a rural community alters between 0.0323 and 0.0783.

Confidence interval:

Let's [tex]p^{}[/tex] represent the sampling fraction of the people who promised to work in a rural area.

Sample size:

[tex]n = 380[/tex]

x: the large number the pupils expected to work in a rural setting

[tex]p^{} = \frac{x}{n} \\\\p^{} = \frac{21}{ 380} = 0.0553\\\\(1- \alpha)\ \ 100\%[/tex]confidence for true proportion:

[tex]( p^{}\ \pm Z_{\frac{\alpha}{2}} \times \sqrt{p^{} \times \frac{(1-p^{})}{n}} ) \\\\[/tex]

For [tex]95\%[/tex]confidence interval:

[tex]\to 1 - \alpha = 0.95[/tex]

When:

[tex]\to \alpha = 0.05[/tex]

Calculating the value of Z by using the table:

[tex]\to Z_{0.025} = 1.96[/tex]

When the  [tex]95\%[/tex] of the confidence interval:

[tex]\to (0.0553 \pm Z_{0.025} \times \sqrt{(0.0553 \times \frac{(1- 0.0553)}{380}})\\\\\to (0.0553 - Z_{0.025} \times \sqrt{(0.0553 \times \frac{(1- 0.0553)}{380})},0.0553 + Z_{0.025} \times \sqrt{(0.0553 \times \frac{(1- 0.0553)}{380}))}\\\\[/tex]

by solving the value we get:

[tex]\to ( 0.0323 , 0.0783 )[/tex]

Find out more about the Confidence interval here:

brainly.com/question/2396419

Answer: 7/100

Step-by-step explanation:

In this question, ignore the 8 and the 3 and focus on the 7.  Isolate it and you will get 0.07.  0.07 in fraction from is 7/100.

The place value of 7 in the decimal number 0.873 is in the hundredth place thus it will be 7/100 or 0.07.

The number system is a way to represent or express numbers.

A decimal number is a very common number that we use frequently.

Since the decimal number system employs ten digits from 0 to 9, it has a base of 10.

Given the decimal,

0.873

8 → Tenth place (Fraction value 8/10)

7 → Hundredth place(Fraction value 7/100)

3 → Thousandth place (Fraction value 3/1000)

Since 7 is at hundredth place thus it will be 7/100.

Hence "The place value of 7 in the decimal number 0.873 is in the hundredth place thus it will be 7/100 or 0.07".

For more about the number system,

https://brainly.com/question/22046046

#SPJ2

Option  A.) Picture 1 is correct

in the problem inequality y ≤ 2x − 4 is given
Right graph for boundary line has been asked.

Inequality can be defined as the relation of the equation contains the symbol of ( ≤, ≥, <, >) instead of the equal sign in an equation.

For the boundary line
y ≤ 2x − 4  this equation transform into
y= 2x-4
above equation is the boundary condition for the given inequality
so in picture one the the dotted line shows the information of equation
y= 2x-4.

Thus, the boundary condition for inequality y ≤ 2x − 4 is in picture 1

Learn more about inequality here:
brainly.com/question/14098842

#SPJ2

Answer:

B. (-0.5, 5.75)

Step-by-step explanation:

Use a graphing calc and analyze the graph for the minimum value (vertex).

Answer:

-4/8

Step-by-step explanation:

Using rise over run would give you -4/8. Since the rise is going downward four times the number would be negative. Since the run is going to the right 8 times it would be positive.

Answer:  the slope is -1/2

Step-by-step explanation:  The rise is -4. Easy to see from the y-intercept, 4 below the origin. The run is 8, again easy to see from the distance between the x-intercept at -8, 8 unite away from the origin.

So slope = rise/run -4/8   simplify (by LCM, 4) So you get slope = -1/2

Answer:

We have this original function given:

[tex] g(x) =-x^2 +5[/tex]

And we want to transtale vertically downward 4 units this function and we will get the new fnction h(x) and on this case we have to do this transformation:

[tex] h(x)= g(x) -4[/tex]

And replacing we got:

[tex] h(x) = -x^2 +5 -4 =-x^2 +1[/tex]

Step-by-step explanation:

We have this original function given:

[tex] g(x) =-x^2 +5[/tex]

And we want to transtale vertically downward 4 units this function and we will get the new fnction h(x) and on this case we have to do this transformation:

[tex] h(x)= g(x) -4[/tex]

And replacing we got:

[tex] h(x) = -x^2 +5 -4 =-x^2 +1[/tex]