Answer:What is the volume of 37% HCl?
If however you meant to say 0.025M and assuming you want to prepare 1L solution then the volume of 37% HCl needed should be= (1000 X 0.025X 36.5)/ (37X1.19X10)=2.07 mL diluted to 1 L using DI water. Good day. If you want 0.025 mole HCl solution, you should take a 2.09 ml of your acid.
Explanation:To prepare 5% solution from this acid; simply take 5 ml. of the acid and add it to 95 ml of distilled water.You get a 5%HCl solution. By the way, Hydrogen Chloride is the name designated to the gas evolved from HCl acid
To determine the volume of a 5% solution that can be made from 25 mL of HCl, we need to use the equation: C1V1 = C2V2
Where:
C1 = Initial concentration of HCl
V1 = Initial volume of HCl
C2 = Final concentration of the solution (5% or 0.05 in decimal form)
V2 = Final volume of the solution (unknown)
What is HCl?HCl stands for hydrochloric acid. It is a strong, highly corrosive acid that is commonly used in various industrial, laboratory, and chemical applications. In its pure form, hydrochloric acid is a colorless liquid with a pungent odor. It is composed of hydrogen (H) and chlorine (Cl) and is known for its acidic properties.
Let's plug in the known values:
C1 = 100% (since the initial HCl is undiluted)
V1 = 25 mL
C2 = 5% or 0.05
V2 = Unknown
Solving for V2:
C1V1 = C2V2
(1)(25 mL) = (0.05)(V2)
25 mL = 0.05V2
Divide both sides by 0.05 to isolate V2:
V2 = 25 mL / 0.05
V2 = 500 mL
Therefore, from 25 mL of HCl, you can make a 500 mL solution with a concentration of 5%.
Learn more about HCl at:
https://brainly.com/question/29204122
#SPJ2
During a combustion reaction, 9.00 grams of oxygen reacted with 3.00 grams of CH4.
What is the amount of the leftover reactant?
0.74 grams of methane
0.89 grams of methane
1.22 grams of oxygen
1.45 grams of oxygen
Answer:d
Explanation:
Colligative properties of solutions include all of the following except: a. an increase in the osmotic pressure of a solution upon the addition of more solute b. elevation of the boiling point of a solution upon addition of a solute to a solvent c. an increase of reaction rate with increase in temperature d. depression of the freezing pont of a solution upon addition of a solute to a solvent e. depression of vapor pressure upon addition of a solute to a solvent
Answer:
Option C, an increase of reaction rate with increase in temperature
Explanation:
Colligative properties are as follows
a) Decrease of vapor pressure
b) Increase of boiling point
c) Reduction of freezing point
d) Increase of osmotic pressure
There is no impact on reaction rate and hence it is not a colligative property.
Thus, option c is the right choice
An increase of reaction rate with increase in temperature isn't an example
of colligative properties of solutions
Colligative properties of solutions depend on the ratio of the number of
solutes to that of the solvent(concentration) and not on the nature of the
substances involved.
Examples of colligative properties include vapor pressure lowering, boiling
point elevation, freezing point depression, and osmotic pressure. Increase of
reaction rate with increase in temperature is therefore not an example of
colligative properties of solutions.
Read more on https://brainly.com/question/24260365
Answer both of these true or false correctly
brainliest if correct
Answer:
There both true.
Explanation:
Hope this helps
Answer:
The first one is True
The second one is false
Explanation:
Ar
Si
K
Al
An atom of which element in the table above has the highest
number of neutrons?
Answer: ar
Explanation:
Can someone give me an example of balancing equations with a solution that is simple?
Explanation:
[tex]H _{2}O _{2(aq)} →H _{2}O _{(l)} + O _{2}(g) \\ solution : 2 \: and\: 2[/tex]
5
Which of the following is a factual statement about
hormones?
A They are the sole cause of mood swings
B
They cause boys' and girls' bodies to develop
C
They are a type of blood cell
D They are extremely difficult to deal with
Answer:
They cause boys' and girls' bodies to develop
For each event stated below, indicate how the concentration of each species in the chemical equation will then change to reach equilibrium.
2CO(g) + O2(g) ⇌ 2CO2(g)
a. increasing the concentration of CO
b. decreasing the amount of O2
c. decreasing the the volume of the system
Answer:
See Explanation
Explanation:
When a constraint such as a change in temperature, concentration or pressure is imposed on a reaction system in equilibrium, the system will readjust itself in such a way as to annul the constraint. This readjustment occurs when the equilibrium position shifts towards the left or right in order to annul the constraint.
a. increasing the concentration of CO: When the concentration of CO is increased, the equilibrium position shifts to the right in order to annul the constraint. This means that more CO2 is produced in the system while the concentration of CO and O2 are decreased until equilibrium is reestablished.
b. decreasing the amount of O2: When the amount of O2 is decreased, the equilibrium position will shift to the left and more CO and O2 are produced while the concentration of CO2 decreases until equilibrium is reestablished.
c. decreasing the the volume of the system: When the volume of the system is decreased, the equilibrium position shifts towards the right hand side where there is less total volume. Hence the concentration of CO and O2 decreases while the concentration of CO2 increases.
Can someone please help me with this question.
Answer:
A-Sphalerite + Dioxygen+Zinc Oxide+Sulfur Trioxide
B-Sodium+Magnesium+Sodium iodide
Explanation:
Heyyy love good luck i may be wrong on letter B so if it is thats my bad but A should be correct :)
The ionization potential of Be atom is more than expected because it has -
(a) half filled valence p orbitals
(b) fully filled valence s orbitals
(c) both a and b
Answer:
(b) fully filled valence s orbitals
Explanation:
Electron configuration of Be: 1s22s2
2s2 is fully filled
What is the Molar mass of zinc
Answer:
the molar mass of zinc is 65.38u or 65.38 grams(g).
How much ammonia would it take to neutralize 5ml of apple cider and 5ml of white vinegar if the ammonia had a molarity of 0.25?
Answer:
[tex]m_{NH_3}=0.0213gNH_3[/tex]
Explanation:
Hello there!
In this case, since it is known that the reaction between ammonia and acetic acid is:
[tex]CH_3COOH+NH_3\rightarrow CH_3COONH_4[/tex]
It is possible for us to realize that the mole ratio of acetic acid (vinegar) to ammonia is 1:1, that is why we can relate the concentrations as follows:
[tex]M_{acid}V_{acid}=M_{base}V_{base}\\\\[/tex]
In such a way, by knowing that the volume of these two are the same, we infer that their concentrations is also de same; and therefore, the mass of ammonia is calculated as:
[tex]m_{NH_3}=0.005L*0.25\frac{molNH_3}{L}*\frac{17.04gNH_3}{1molNH_3}\\\\m_{NH_3}=0.0213gNH_3[/tex]
Regards!
You studied the body of someone who died in their sleep and found that your assistant accidentally left the body facedown while you were away. Knowing that the person, in life, slept face-up, you can see that the blood is pooled at their backside. What has your assistant accidentally revealed about the victim?
A. The victim probably died only a few hours before the assistant’s accident
B. The victim was probably poisoned to death
C. The victim died at least 8 hours before the body was flipped
D. The victim was probably moved after they had died by someone else—or they didn’t die in their sleep!
Answer:
D
Explanation:
If you have a solution that is 15 percent by mass of KCl in benzene, what is the new boiling point?
Answer:
https://www.chegg.com/homework-help/questions-and-answers/1-10-points-solution-15-percent-mass-kcl-benzene-new-boiling-point--901-c-b-921-c-c-821-c--q63751186
Explanation: Thats your answer
mplete the following Charles' Law calculations. If the current temperature is 25 degrees C and you have a 2L balloon, identify the new volume of the balloon if you increase the temperature to 30 degrees C. Remember to change Celsius to Kelvin: K= C + 273.
Answer:
New volume = 2.03 L
Explanation:
Given that
Initial temperature, T₁ = 25°C = 298 K
Initial volume, V₁ = 2L
Final temperature, T₂ = 30°C = 303 K
We need to find the final volume. The mathematical form of Charle's law is given by :
[tex]\dfrac{V_1}{V_2}=\dfrac{T_1}{T_2}\\\\V_2=\dfrac{V_1T_2}{T_1}[/tex]
Put all the values,
[tex]V_2=\dfrac{2\times 303}{298}\\\\V_2=2.03\ L[/tex]
so, the new volume is equal to 2.03 L.
g A closed-end manometer was attached to a vessel containing argon. The difference in the mercury levels in the two arms of the manometer was 9.60 cm. Atmospheric pressure was 783 mm Hg. The pressure of the argon in the container was ________ mm Hg. Selected Answer: Incorrect 773 Answers: 882 793 661 773 Correct 96.0
Answer:
Answer: 882mmHg
Explanation:
In a closed-end manometer, the gas added is under a pressure that is measured against atmospheric pressure. The difference in pressure between both gases is equal to the difference in mercury levels. Thus, the pressure of the argon can be:
783 mmHg - 96.0mmHg = 687mmHg
783 mmHg - 96.0mmHg = 879mmHg
Based on the options, the possible answer (The nearest to the second value) is:
Answer: 882mmHgHow many grams of water can be heated from 15.0 oC to 55oC using 4250.0 J.
Answer:
25.42 grams
Explanation:
The specific heat of water is 4.18 J/g •°C, so that means that it takes 4.18 joules of energy to raise one gram of water 1 °C.
Change in temp = 55 - 15 = 40°C
So we can calculate how much energy it would take to raise the temp of one gram of water by one degree using the following
(4.18 J/g•°C) * (40°C) * (1 gram) = 167.2 J
So if it takes 167.2 J of energy to raise on gram of water 40°C, we now we can calculate the amount of grams of water that can heated with 4250 J of energy
(4250 J) ÷ (167.2 J) = 25.42 grams of water can be heated from 15°C to 55°C
Question 4 (10 points)
If a sollition has a pOH of 5.2 the [OH-] of the solution is
оа
6x 10-6 M
Ob
6.3 x 10-6 M
Oc
1.58 x 10-5M
Od
2x10-5M
Answer:
Explanation:
to find the mass in g of 3 moles Al .
Answer:
81 gm
Explanation:
The mass of 1 mole is 27 gSo, Mass of 3 moles of Aluminium would be 3 × 27 = 81 gm
Thus mass of 3 Moles of Aluminium is 81 gm.
what it meant by executive mention the function of Executive
[tex]\huge{\textbf{\textsf{{\color{pink}{An}}{\red{sw}}{\orange{er}} {\color{yellow}{:⌐■-■}}}}}[/tex]
Definition:-
The organ of government that primarily looks after the function of implementation and administration is called the executive.
Function:-
Executive is the branch of government responsible for the implementation of laws and policies adopted by the legislature.
ThanksHope it helps.a warm air is rising as cooler air es in to take its place. what is the name for that?
Answer:
convection
hope this helps
have a good day :)
Explanation:
Which of the following compounds would have the lowest
solubility?
ОНczА
O Nm3R
O Bv3(AX)2
O Hn(EX2)2
O MRD2
balance the equation P + O2 → P4O10
A scientist wants to investigate several problems. In which of the following situations is using a simulation LEAST suitable for solving a problem?
a. When a scientific study requires performing a large number of trials that need to be conducted very quickly
b. When the solution to the problem requires real-world data inputs that are continually measured at regular intervals.
c. When performing an experiment that would be too costly or dangerous to conduct in the real world
d. When it is considered acceptable to make simplifying assumptions when modeling a real-world object or phenomenon
Answer:
A
Explanation:
got from another website
The simulation which is least suitable to scientists for solving a problem is when performing an experiment that would be too costly or dangerous to conduct in the real world.
What is scientific approach?Scientific approach is an empirical method of acquiring knowledge and result. This method involved the careful observation of the problem, applying skepticism about the problem and giving cognitive assumptions also.
If a scientist wants to investigate several problems, then they will perform a large no. of trials at regular intervals to get the required result. But if performing of any experiment is dangerous to conduct in the real world then scientists will ignore to solve that problem.
Hence, option (C) is correct.
To know more about scientific approach, visit the below ink:
https://brainly.com/question/497944
A sample of ideal gas at room temperature occupies a volume of 10.0 L at a pressure of 302 torr. If the pressure changes to 1510 torr
with no change in the temperature or moles of gas, what is the new volume, V2?
Explanation:
boyles law; P1V1=P2V2
302×10=1510×V2
V2=2L
Which of the following is an example
of a chemical property?
A. Iron has a tendency to rust.
B. The boiling point of water is 100°C.
C. Salt will dissolve in water.
D. Chlorine does not conduct
electricity
Answer:
Examples of chemical properties include flammability, toxicity, acidity, reactivity (many types), and heat of combustion.
in a hypothetical element ,two energy levels are separated by an energy of 282kj mol-1 . what wavelength of light (in nma) is evolved for an electron to change between these two levels?
Answer:
7.05 × 10⁻²² nm
Explanation:
Step 1: Given and required data
Energy evolved when a mole of electrons changes between the 2 levels (E): 282 kJPlanck's constant (h): 6.63 × 10⁻³⁴ J.sSpeed of light (c): 3.00 × 10⁸ m/sStep 2: Calculate the wavelength (λ) of the light evolved
We will use Planck-Einstein's relation.
E = h × c/λ
λ = h × c/E
λ = (6.63 × 10⁻³⁴ J.s) × (3.00 × 10⁸ m/s)/(282 × 10³ J) = 7.05 × 10⁻³¹ m
We will convert λ to nm using the conversion factor 1 m = 10⁹ nm.
7.05 × 10⁻³¹ m × 10⁹ nm/1 m = 7.05 × 10⁻²² nm
Suppose that you must go into court and testify as to the level of X in the river water. Your lawyer is concerned that your analytical results are lower than they should be because you cannot extract with benzene (distribution Ratio K=4) all of X from your samples. Assume the concentration of X in the 1.00 L river water sample is 1.06 x 10-4 M.
a. How many extracts would be required to remove all but 1000 molecules of X from the sample with repeated 10.00 mL portions of extract?
b. How many extractions are required for a 99.99% chance of extraction of the last molecule remaining (0.01% chance of a single molecule left behind)
Answer:
The appropriate solution is:
(a) n ≈ 900
(b) n ≈ 1165
Explanation:
According to the question,
(a)
The final number of molecules throughout water will be:
= [tex](\frac{1000}{1000}\times 4\times 10 )^n[/tex]
where, n = number of extractions
Now,
The initial number of molecules will be:
= [tex]1.06\times 10^{-4}\times 6.023\times 10^{23}[/tex]
= [tex]6.387\times 10^{19}[/tex]
Final number of molecule,
⇒ [tex]1.566\times 10^{-16}=(\frac{1000}{1040} )^n[/tex]
[tex]n \approx 900[/tex]
(b)
Final molecules of X = left (0.01%)
hence,
⇒ [tex]initial = 6.384\times 10^{19}[/tex]
[tex]\frac{1}{6.384\times 10^{19}} =(\frac{1000}{1040} )^2[/tex]
[tex]n \approx 1165[/tex]
a transverse wave moves a medium at an abtuse angle to the wave , true or false ?
Answer:
True! A transverse wave does move a medium at an obtuse angle to the wave!!
Answer:
False
Explanation:
Suppose you have a solution that might contain any or all of the following cations: Cu 2, Ag , Ba 2, and Mn2 . The addition of HBr causes a precipitate to form. After the precipitate is filtered off, H2SO4 is added to the supernate, and another precipitate forms. This precipitate is filtered off, and a solution of NaOH is added to the supernatant liquid until it is strongly alkaline. No precipitate is formed. Which ions are present in each of the precipitates
Answer:
Ag⁺, Ba²⁺,
Explanation:
We can solve this question using the solubility rules:
When an Halide as Br- is added to a solution, the ions that can be precipitate are Ag⁺, Hg₂²⁺ and Pb²⁺.
That means the first ion present is Ag⁺
When sulfates, SO₄²⁻ are added, the ions that precipitates are: Ag⁺, Ca²⁺, Sr²⁺, Ba²⁺, Hg₂²⁺ and Pb²⁺
The second ion present is Ba²⁺
Hydroxides of Cu²⁺ and Mn²⁺ are insolubles but as no precipitate are formed when the solution is strongly alkaline those ions are not present.
Which of the following solutions is the most dilute.
a. 0.32 M
b. 1.5 M
c. 2.5 mol / L
d. 0.23 mol / L
e. 0.23 mol / L
Answer:
d and e
Explanation:
We have 5 solutions with different molar concentrations, that is, the quotient between the number of moles of solute and the liters of solution. This can be expressed as mol/L or M. The most dilute would be the one having the less number of moles of solute per liters of solution, that is, solution d or e, which have the same concentration. If we order them from the most diluted to the most concentrated, we get:
d = e < a < b < c