Answer:
C
Explanation:
If you stay at 90 degrees Celsius and a gas in a liquid solution has a pressure of 2 atm, what solubility should it have if it has a solubility of 64 g/L at a pressure of 8 atm?
Answer:
im not sure
Explanation:
in your notebook,write the appropriate tempo for the following actions.Then demostrate the actions then,demostrate the action in front of your parents,guardian
Answer:
cell :—
•They lack a well-defined nucleus, have a nucleoid instead.
•Usually have double-stranded, circular DNA.
•Do not have mitochondria.
Eukaryotic cell :—
•Have a well-defined nucleus enclosed in the nuclear membrane.
•Have a linear double-stranded nucleus.
•Mitochondria are present.
What is the single replacement reaction of Zinc + Lead(iv) Chloride
Answer:
[tex]2Zn+PbCl_4\rightarrow 2ZnCl_2+Pb[/tex]
Explanation:
Hello there!
In this case, when referring to single replacement reactions, it is crucial for us to figure out the formula of the starting reactants; thus, we know zinc is Zn and lead (IV) chloride is PbCl₄. In such a way, the reaction proceeds as follows:
[tex]Zn+PbCl_4\rightarrow ZnCl_2+Pb[/tex]
Which must be balanced as shown below:
[tex]2Zn+PbCl_4\rightarrow 2ZnCl_2+Pb[/tex]
Regards!
Find the pH of a solution with a [H+] of 0.045M.
Answer:
1.35Explanation:
The pH of a solution can be found by using the formula
[tex]pH = - log ([ {H}^{+} ])[/tex]
From the question
[H+] = 0.045 M
We have
[tex]pH = - log(0.045) \\ = 1.346787...[/tex]
We have the final answer as
1.35Hope this helps you
Answer:
1.35
Explanation:
How many atoms are there in 6.8g of S?
Which procedure is an attempt to correct a genetic disorder by replacing a mutated gene with a normal allele?
O selective breeding
• cloning
O artificial selection
•
gene therapy
gene therapy
Explanation:
Gene therapy, also called gene transfer therapy, the introduction of a normal gene into an individual's order to repair a mutation that causes a genetic disease.
Answer:
C artificial selection
Explanation:
Brainly please
Explain why is it a good idea for the eco-house to have both a wind turbine and solar panels?
Answer:
Explanation:
Wind is more of an efficient power source than solar. Compared to solar panels, wind turbines release less CO2 to the atmosphere, consume less energy, and produce more energy.
PLEASE HELP
Referring to the energy diagram below which arrow segment represents the activation
energy of this reaction?
O Arrow B
O Arrow D
O Arrow A
O Arrow C
Answer:
Arrow B
Explanation:
Which example in the video is a physical change?
A) Burning steel wool
B) Mixing chemicals
C) Rusting nail
D) Melting ice cream
D melting ice cream because if u know what a physical change is its a change that you can reverse chimical change are changes you cant reverse so u can freeze back ice cream so :D
PLS HELP ASAP NO LINKS
What type of scientist studies matter and its composition?
Biologist
Chemist
Physicist
Engineer
Answer:
.biology and maybe physics
Answer:
Biologist
ExplanationBiologist Unlike the above type of scientist, geoscientists’ work involves exploring the earth and its internal environment. They study the composition, structure, and processes of the earth by being indoors and outdoors. They contribute to the discovery of mines, petroleum deposits, minerals, and other aspects of the earth.
Which product is made from nonmetallic mineral resources?
a. Stainless steel
b. iron nails
c. Copper wires
d. concrete
Answer:
Concrete
Explanation:
What type of wave has the SHORTEST wavelength and the highest frequency?
Answer:
The answer is gamma rays.
Explanation:
Gamma rays have the highest energies, the shortest wavelengths, and the highest frequencies on the electromagnetic spectrum.
Why is carbon dioxide a covalent bond?
Explanation:
One atom of carbon (2.4) combines with two atoms of oxygen (2.6) to form the compound carbon dioxide CO2 (only the outer shell of carbon's electrons are shown). ... The carbon dioxide molecule is held together by the strong C=O. carbon–oxygen double covalent bonds by sharing electrons.
The first organisms to arrive in an ecosystem?
Convert 6.71 moles NH3 to number of molecules.
Answer: There are [tex]40.41 \times 10^{23}[/tex] molecules present in 6.71 moles of [tex]NH_{3}[/tex].
Explanation:
Given: Moles of [tex]NH_{3}[/tex] = 6.71 mol
According to the mole concept, 1 mole of every substance contains [tex]6.022 \times 10^{22}[/tex] molecules.
Therefore, molecules present in 6.71 moles are calculated as follows.
[tex]Molecules = moles \times 6.022 \times 10^{23}\\= 6.71 \times 6.022 \times 10^{23}\\= 40.41 \times 10^{23}[/tex]
Thus, we can conclude that there are [tex]40.41 \times 10^{23}[/tex] molecules present in 6.71 moles of [tex]NH_{3}[/tex].
This gardener started with much smaller plants in this park. Over time, the garden has grown into a large display of brilliant flowers. What would you tell the gardener to explain how the plants have grown and flourished so successfully?
Select the correct answer.
A circuit is used in which process?
OA. electricity
OB. magnetism
OC. velocity
OD. gravity
Answer:
electricity
Explanation:
A circuit is used in every electrical and electronics operation.
Why do you think certain countries favored military solutions to the great depression while other contries did not
Answer:
The answer is below
Explanation:
Certain countries like Germany under Adolf Hitler favored military solutions to the great depression because the government felt that having a mass production of military weapons and recruitment of unemployed people or citizens into the army would change the dire situation.
On the other hand, countries like the United States did not favor the military solutions but instead choose the NEW DEAL under Franklin D Roosevelt; the reason could be linked to their democratic culture, the isolation belief tendency.
A gas has a volume of 25 ml, at a pressure of 1 atmosphere (1 atm). Increase the volume to 125 ml and the temperature remains constant. What is the new pressure? please help
Explanation:
The new pressure can be found by using the formula for Boyle's law which is
[tex]P_1V_1 = P_2V_2 \\[/tex]
Since we're finding the new pressure
[tex]P_2 = \frac{P_1V_1}{V_2} \\[/tex]
We have
[tex]P_2 = \frac{25 \times 1}{125} = \frac{25}{125} = \frac{1}{5} = 0.2 \\ [/tex]
We have the final answer as
0.2 atmHope this helps you
Beryllium hydrogen carbonate is more than 3% hydrogen by mass.
True
False
Work out the relative formula mass of ammonium nitrate, NH4NO3.
Relative atomic masses: H 1; N 14; O 16.
...........................................................................................................................
...........................................................................................................................
Relative formula mass of ammonium nitrate = ...............................
Answer:
The relative molecular mass of ammonium nitrate is 80 gm
Explanation:
[tex]M_{NH4NO3}[/tex] = 14 + (4 × 1) + 14 + (16 × 3) = 80 (gm)
what will litmus paper turn when it reacts with sodium nitrate?
The pH of a solution is 8. Some hydrochloric acid is added to the solution. Suggest the pH of the solution after mixing. pH=.......??
Answer:
Probably around 6 because the ph of hydrochloric acid is 3
Explanation:
What are carbohydrates?
A. a type of base
B. a type of glyceride
C. a type of macromolecule
D. a type of amino acid
Answer:
a
Explanation:
me say so
Answer:
C
Explanation:
Please and thank you in advance. Due today
Answer:
Sorry I really don't know but can you help with one of my question I posted please thanks.
How much heat, in kilojoules, is needed to raise the temperature of 236 g of silver from 8.5oC to 34.9 °C? (cAg = 0.24 J/g°C)
Answer:
1.49kJ
Explanation:
Using the formula as follows;
Q = m × c × ∆T
Where;
Q = amount of heat (joules)
m = mass (g)
c = specific heat of silver (J/g°C)
∆T = change in temperature (°C)
According to the information given in this question;
mass of Silver (Ag) = 236g
c of Ag = 0.24 J/g°C
initial temperature (T1) = 8.5°C
final temperature (T2) = 34.9°C
∆T = T2 - T1 = 34.9 - 8.5 = 26.4°C
Using Q = m × c × ∆T
Q = 236 × 0.24 × 26.4
Q = 1,495.3 Joules
Amount of heat needed to raise the temperature of Silver (Q) in kilojoules is 1495.3/1000 = 1.4953
Q = 1.49kJ
How many formula units are in 325 grams of iron (III) chloride?
Answer:
1.204 × 10^24 formula units
Explanation:
Using the following formula to convert mass of iron (III) chloride to moles;
mole = mass/molar mass
Molar mass of FeCl3 = 56 + 35.5(3)
= 56 + 106.5
= 162.5g/mol
Mole = 325/162.5
mole = 2mol
Next, to calculate the formula units of FeCl3, we multiply the number of moles of FeCl3 by Avagadro number (6.02 × 10^23)
Formula units of FeCl3 = 2 × 6.02 × 10^23
12.04 × 10^23
= 1.204 × 10^24 formula units.
A volume of 3.0 L of air is warmed from 50 degrees celsius to 100 degrees celsius. What is the new volume if the pressure remains constant?
Answer:
3.45 L
Explanation:
Temperature and volume are linearly related (when one increases or decreases, so does the other).
Convert the temperature to Kelvin:
50 °C = 323 K
100 °C = 373 K
To find the rate of change, divide 373 by 323 to get roughly 1.15
Multiply the amount of liters by this factor to get your answer
How many moles of KCl are produce when 61.5 g of KClO3 are decomposed?
Answer:
0.502mol
Explanation:
The balanced chemical equation of the reaction described in this question is as follows:
2KClO3 → 2KCl+ 3O2
According to the equation above, 2 moles of KClO3 will produce 2 moles of KCl.
Using mole = mass/molar mass to convert mass of KClO3 to moles
Molar mass of KClO3 = 39 + 35.5 + 16(3)
= 39 + 35.5 + 48
= 122.5g/mol
mole = 61.5 g ÷ 122.5g/mol
mole = 0.502mol
Since 2 moles of KClO3 will decompose to produce 2 moles of KCl.
0.502 mol of KClO3 will decompose to produce 0.502 × 2/2
= 0.502mol of KCl.
If 125 mL of 0.56 MH2SO4, is diluted to a volume of 0.250 L, what is the molarity of the resulting solution?
Answer:
0.28M H2SO4
Explanation:
The molarity of a solution is defined as the ratio between the moles of the solute (In this case, H2SO4) and its volume in liters.
In the problem, the volume of the solution is increased from 125mL to 250mL. That means the solution is diluted:
250mL / 125mL = 2 times.
As the solution is diluted 2 times, the concentration is decreased in 2, that is:
0.56M / 2 =
0.28M H2SO4