Answer:
Current = 0.6 A
Explanation:
Given that,
Three resistors 2 ohms, 3 ohms and 5 ohms are connected in series with a battery of voltage 6 V.
In series combination of resistors, the current through each resistor is the same while the voltage divides.
The equivalent resistance in this case is given by :
[tex]R_{eq}=R_1+R_2+....[/tex]
Put all the values,
[tex]R_{eq}=2+3+5\\\\R_{eq}=10\ \Omega[/tex]
Let I be the current. Using Ohm's law,
[tex]V=IR\\\\I=\dfrac{V}{R}\\\\I=\dfrac{6}{10}\\\\I=0.6\ A[/tex]
So, the current through each resistor and the current through the battery is equal to 0.6 A.
According to the graph, how many atoms would remain after two half-lives?
20 atoms
80 atoms
40 atoms
50 atoms
Answer:
Let No be initial no of atoms
N = N0 / 2 after 1 half-life
N = N0 / 4 after 2 half-lives
So after 2 half-lives 20 of the 80 atoms remain
A solid metal ball with a mass of 10.0 kg is placed on a smooth floor what force would be needed to accelerate the ball at a rate of 2.0 m/s2.
40 N
20 N
5 N
0.2 N
I WILLL GIVE BRAINLYEST!!!
The following map was created using modern technology to determine the overall temperature change of the oceans. What can be concluded about the relationship between temperature and salinity from the map? (10 points)
Group of answer choices
Areas of water with higher precipitation have a greater salinity.
Decreasing temperatures evaporate water slowly, causing an increase in salinity.
Increasing temperatures evaporate water faster, causing an increase in salinity.
The areas of water without temperature changes will have a greater salinity.
Answer:
Increasing temperatures evaporate water faster, causing an increase in salinity.
Explanation:
When the water molecules of the ocean become heated, they expand. ... Since warmer water thus can hold more salt and other molecules than cold water; it can have a higher salinity.
The correct option is C, increasing temperatures cause faster evaporation of water which results in an increase in salinity.
What does the map represent?Due to the link between ocean temperature and salinity, this map of ocean temperature can easily be compared to a map of ocean salinity.Salinity rises as water temperature rises, and vice versa: the lower the water's temperature, the higher the salinity. The Timor Sea, Arafura Sea, and the northern portion of the Coral Sea can all be seen on this map as having higher temperatures than most of the nearby waters. These regions' shallow water and proximity to the equator, as well as the influence of warm ocean currents, are the main causes of these higher temperatures. In turn, that would imply that they experience greater water evaporation, which adds to greater salt concentration, resulting in more salinity in the water than in other locations.Hence we can conclude that as the temperature rises, the process of evaporation takes place more rapidly which decrease the concentration of salt in water, which leads to higher salinity.
Learn more about temperature mapping here:
https://brainly.com/question/1418606
#SPJ10
what does thermal energy do
Answer:
Thermal energy can be transferred to one object to another in the form of heat. It causes molecules and atoms to collide with each other because of the rising of heat.
Explanation: Well thermal energy is a example of kinetic energy. It is heated by motion. It is heat that can be measured
the spring constant for each of these springs 100 000 N m-1. Calculate the distance that each of these rear springs is compressed by this vehicle as shown in the diagram above
Answer:
sorry
Explanation:
Suppose your class invites a person to give a speech. When you test out the sound system in the gym you find there are so many echoes the speaker cannot be understood. What needs to be done to fix this problem?
Answer:
You either need to lower the volume so the sounds intensity is lessened. Or you can pad the walls to absorb the sound rather than defect.
Explanation:
Sound intensity allows it to be heard further, but in an enclosed room it will start returning. Sound will deflect off of hard objects do to its interactions with solids. A softer and foamy material can dampen it.
true or false? rocks have organic materials and fossil remains in them
Answer:
trueeeee
Explanation:
calculate the heat required to change 2.0kg of ice at 0°C to water at 0°C
Answer:
160000 calories or 669440 Joules
Explanation:
Using the formula as follows;
Q = L × m
Where;
Q = amount of heat (J)
L = specific latent heat
m = mass (g)
* Latent heat (L) required for melting of ice is 80 calories/grams.
* Mass of ice in grams = 2kg × 1000 = 2000g.
Hence, Q = 80 × 2000
= 160000 Calories
1 calorie = 4.184J
160000 calorie = 160000 × 4.184
= 669440J
An area experiences thunderstorms with high winds and a drop in temperature. Which weather event most likely occurred? A. A stationary front moved through the area. B. A fast-moving warm front moved trough the area. C a fast-moving cold front moved through the area. D. A slow-moving warm front followed a fast-moving cold front through the area
Answer:
C a fast-moving cold front moved through the area.
Explanation:
This is because, since there is a there is a thunderstorm and high winds in the area, this can only be caused by a fast moving front. Also there is a temperature drop, this can only be caused by the fast moving cold front since a cold front has a low temperature.
Thus, for the area to experience thunderstorms with high winds and a drop in temperature, a fast-moving cold front moved through the area.
Heat is the measurement of energy from all the particles that are in a substance.
Please select the best answer from the choices provided : T/F
Explanation:
the correct answer is (true) if am not mistaking incase am wrong sorry
What element is formed in the following nuclear reaction
Answer:
Oxygen or more precisely, the O-15 isotope.
Next, given the equivalent resistance,
Req(23), what is the equivalent
resistance, Reg, of the series
combination of R1 and Req(23)?
Ri
Req(23)
100 12
120 12
Answer:
Req= 220 ohm
Explanation:
In series combination just add the resistances.
Req=R1+Req(23)
Req=100+120
Req= 220 ohm
All electric charge is based on the what in Atoms
Answer:
c. Protons and electrons
Explanation:
electrons carry out negative charge
protons carry out positive charges
A wire lying along a y axis form y=0 to y=0.25 m carries a current of 2.0 mA in the negative direction of the axis. the wire fully lies in a magnetic field given by (0.3y)i + (0.4y)j Tesla. what is The magnetic force on the wire
A: (0.15i+0.2j) N
B: (0.0015i+0.002j) N
C: (-6.25E-5 k) N
D:(6.25E-5 k) N
E: None of the above
Answer:
E: None of the above
Explanation:
Since the force on the wire F = ∫idL × B where i = current in wire = 2.0 mA = 2.0 × 10⁻³ A, dL = vector length of wire = dyj and we integrate from y₁ = 0 m and y₂ = 0.25 m, and B = magnetic field = (0.3y)i + (0.4y)j
So, F = ∫idL × B
and we integrate from y₁ = 0 m and y₂ = 0.25 m
F = 2.0 × 10⁻³ A∫₀⁰°²⁵[dyj m × (0.3y)i + (0.4y)j]
F = 2.0 × 10⁻³ A∫₀⁰°²⁵[dyj m × (0.3y)i + dyj m × (0.4y)j]
F = 2.0 × 10⁻³ A∫₀⁰°²⁵[(0.3y) × dy(j × i) + 0.25 × (0.4y)(j × j)]
F = 2.0 × 10⁻³ A∫₀⁰°²°⁵[(0.3ydy(-k) + 0.1y)(0)]
F = 2.0 × 10⁻³ A∫₀⁰°²⁵(-0.3ydy)k
F = 2.0 × 10⁻³ A[-0.3y²/2]₀⁰°²⁵k
F = -2.0 × 10⁻³ A[0.3(0.25)²/2 - 0.3(0)²/2]k
F = -2.0 × 10⁻³ A[0.3(0.0625)/2 - 0]k
F = -2.0 × 10⁻³ A[0.3(0.0625)/2]k
F = -1 × 10⁻³[0.01875]k N
F = -[0.01875 × 10⁻³]k N
F = -[1.875 × 10⁻⁵]k N
Since the answer is not contained in the options, the answer is E.
. A train passes a stationary observer. Which of the following best describes how the amplitude and the
apparent frequency of the sound waves heard by the observer change as the train moves away?
When 120 V is applied across a 20 m long wire, the magnitude of the current density was found to be 2 * 10 ^ 8 * A / (m ^ 2) . The resistivity of this wire is
Answer:
[tex]\rho=3\times 10^{-8}\ \Omega-m[/tex]
Explanation:
Given that,
Voltage, V = 120 V
The length of the wire, l = 20 m
The current density of the wire, [tex]\dfrac{I}{A}=2\times 10^8\ A/m^2[/tex]
We need to find the resistivity of this wire. We know that,
[tex]R=\rho \dfrac{l}{A}[/tex]
Where
[tex]\rho[/tex] is the resistivity of wire
Also, [tex]R=\dfrac{V}{I}[/tex]
So,
[tex]\dfrac{V}{I}=\rho \dfrac{l}{A}\\\\\rho=\dfrac{V}{l\dfrac{I}{A}}[/tex]
Put all the values,
[tex]\rho=\dfrac{120}{20\times 2\times 10^8}\\\\=3\times 10^{-8}\ \Omega-m[/tex]
So, the resistivity of this wire is equal to [tex]3\times 10^{-8}\ \Omega-m[/tex].
Help me please!!!!!!!!!!
Answer:
B because 17100 is the half of the carbon
9. Bryce drove his car 10 km from his house to Belle Plaine. It took him 8 minutes. He got stopped at a long
traffic light on the return home and so he took 2 minutes longer on the return trip. What was Bryce's average
speed in km per minute? (3 pt)
Answer:
2 km/minuteExplanation:
Here, we are asked to calculate the average speed in km/minute.
As we know that,
Average speed = Total distance ÷ Total time takenHere,
→ Total distance = 10 km + 10 km
Because, he first drove 10 km from his house to Belle Plaine and then he again came back to his house.→ Total distance = 20 km
→ Total time = 8 minutes + 2 minutes
→ Total time = 10 minutes
Substitute the values in the formula of average speed,
→ Average speed = Total distance ÷ Total time taken
→ Average speed = 20km ÷ 10 minutes
→ Average speed = 2 km per minuteUse the drop-down menu to answer the question.
According to "Take a Closer Look", what type of lens is used to correct nearsightedness?
Answer: A.) concave lens
Explanation: i hope this helps shawtay :)
In general, a concave lens (also known as a diverging lens) is used to correct nearsightedness, as stated in "Take a Closer Look." Option C is correct.
What is the lens?A lens is an optical component that is used to refract (bend) and focus light. It is typically made of a transparent material, such as glass or plastic, and has a specific shape that allows it to alter the path of light as it passes through.
Here,
In general, a concave lens (also known as a diverging lens) is used to correct nearsightedness, as stated in "Take a Closer Look."
A concave lens is thinnest at the center and thicker at the edges, which causes light rays passing through the lens to diverge or spread out. By placing a concave lens in front of a nearsighted eye, the lens causes incoming light rays to diverge more before they reach the eye's lens, which then focuses them properly on the retina, resulting in clearer vision.
Learn more about the lens here:
https://brainly.com/question/2919483
#SPJ6
POSSIBLE 1. Which of the following are examples of a physical reactions: (1) ice melting, (2) pencil breaking, (3) iron rusting, (4) wood burning? a. 1.4 b. 3,4 c. 2.3 d. 1,2
Answer:
D) 1 & 2
Explanation:
Ice melting can be refrozen and although the pencil breaks, it doesn't change the chemical formula of the pencil
Which kind of wave is generated by a plucked guitar string as the molecules
of air around it begin to vibrate?
O A. Transverse
O B. Surface
O C. Electromagnetic
O D. Longitudinal
PLEASE HELP
Answer:
longitudinal
Explanation:
How much work is done by 0.070 m3 of gas, when the volume remains constant with pressure of 63 x 105 Pa?
Answer:
W = 0 J
Explanation:
The amount of work done by gas at constant pressure is given by the following formula:
[tex]W = P\Delta V[/tex]
where,
W = Work done by the gas
P = Pressure of the gas
ΔV = Change in the volume of the gas
Since the volume of the gas is constant. Therefore, there is no change in the volume of the gas:
[tex]W = P(0\ m^3)\\[/tex]
W = 0 J
A conducting bar moves along a circuit with a constant velocity. A constant magnetic field is perpendicular to the bar and circuit. The bar has covered 13.00 m2 of area by a certain time and then 15.60 m2 1.00 second later. The average EMF induced in the circuit over the 1.00 second time interval is 1.30 V. What is the strength of the magnetic field?
Answer:
0.500 T
Explanation:
Since the change in time and the number of coils are both 1, I set the problem up to be 1.3=(1.5(x)-13(x)). I then plugged in numbers for x until I got the answer to be 1.3 V.
can someone please help me please I will mark brainlist and give you 5 stars pleasee
Answer:
If I did my calculations correctly then the answer is 11 but I may be weong
Answer:
it's 11
gkccgkxcgikvxxkg
Which position has the least amount of kinetic energy?
the position that has least kinetic energy is option D
What is a disadvantage of using nuclear power to produce electricity?
Answer:
The further implementations of nuclear power are limited because although nuclear energy does not produce CO2 the way fossil fuels do, there is still a toxic byproduct produced from uranium-fueled nuclear cycles: radioactive fission waste.
Explanation:
Answer:
Disadvantages of Nuclear Power
The further implementations of nuclear power are limited because although nuclear energy does not produce CO2 the way fossil fuels do, there is still a toxic byproduct produced from uranium-fueled nuclear cycles: radioactive fission waste.
Explanation:
please dont waste my time with those 'answer is in the file"
The force exerted by water and air on the skier is 50 Newtons (N) to the left. The force exerted by the boat on the skier is 40 Newtons (N) to the right. How will the unbalanced forces change the motion of the skier
[tex]\mathfrak{\huge{\orange{\underline{\underline{AnSwEr:-}}}}}[/tex]
Actually Welcome to the concept of Net force on a body.
We know that net force on a body is the force that is calculated from all direction and added , if there is any force remained at last, then the forces are unbalanced,
and if the net force on a body is Zero, then it is a balanced force,
here,
Force to left on skier = 50 N
Force to right on skier = 40 N
hence the net force = left force - right force
Net force = 50 - 40 ==> 10 N
hence the Net force is 10 N in the left direction of the skier.
Martin rides his motorcycle at 20 m/s. suddenly he sees a row of stones
blocking the road 170 m ahead. He applies the brakes and the motorcycle is
decelerated at 2 m/s?. Justify will he be able to stop in time?
Answer: Yes
Explanation:
Given
Martin initial speed is [tex]u=20\ m/s[/tex]
Stones is at 170 m ahead
Deceleration [tex]a=2\ m/s^2[/tex]
Using the equation of motion [tex]v^2-u^2=2as[/tex]
Insert the values
[tex]0-20^2=2\times (-2)s\\s=\dfrac{400}{4}\\\\s=100\ m[/tex]
So, it took 100 m to stop completely. Hence martin will be able to stop in time.
Madeline is measuring wavelengths. Look at her notes above. What mistakes has she made in her measurement? What should she do differently to obtain the correct wavelength?
can someone help? i don’t need 14
Answer:
Explanation:
11.) d
12.) f
13.) c
15.) i
pls give me brainliest