this very slow wired technology uses the phone line; an inexpensive isp subscription should be the only additional cost, but you cannot connect to the internet and use your phone on the same line simultaneously.

Answer: occupational safety and health, also commonly referred to as occupational health and safety, occupational health, or occupational safety, is a multidisciplinary field concerned with the safety, health, and welfare of people at work.

Since you are familiar with SSH and are happy with the level of security it provides and you want similar secure communication for file transfers on your network. The thing that you should  use is SFTP.

In regards to computing, Your personal information might also be leaked online due to data exposure. To reduce the amount of information you leave behind, confidentiality in communication is crucial.

When you secure your communication, you essentially hide the information from sources that are accessible to the general public. Encryption is a key component of most methods of communication privacy.

Note that the Secure File Transfer Protocol (SFTP) is a network protocol for managing and transferring large files and sensitive data in a secure manner. The Internet Engineering Task Force created SFTP as a Secure Shell (SSH) extension to allow for the access, transfer, and management of files over a network.

Therefore, in the context of the question above, Secure Shell Encryption is used by SFTP, also known to be the Secure File Transfer Protocol, can help to give or offer a high level of security for sending and receiving file transfers.

Learn more about secure communication from

https://brainly.com/question/15021716
#SPJ1

According to the statement, the tool you should use is Event log.

Because, event logs are the best way to monitor and track firewall activity. Thus, they will provide a comprehensive record of all packets that have been rejected.

Firewalls are essential components of any secure network, providing a first line of defense against malicious actors and unwanted connections. As such, it is important to have a reliable and comprehensive record of the traffic that passes through the firewall.

Event logs are one of the most effective tools for monitoring and tracking the activity of the firewall, allowing administrators to quickly identify any suspicious activity, potential threats, or blocked connections.

Learn more about Firewall Management:

https://brainly.com/question/12130487

#SPJ4

No, there won't be any kind of speed improvement.

To learn more about Ethernet and wifi are both linked refer to:

https://brainly.com/question/26956118

#SPJ4

Using the knowledge in computational language in python it is possible to write a code that write an if statement that assigns deliverycomplete with 1 if bricksdelivered is equal to bricksexpected.

%Define the function CheckDelivery()

function deliveryComplete = CheckDelivery( brickDelivered, bricksExpected)

%Start the if-else statements to check if delievery is completed.

%Delievery completed

if ( brickDelivered == bricksExpected)

deliveryComplete = 1;

%Delievery not completed.

else

deliveryComplete = 0;

%End of if-else

end

%Print the result.

fprintf("deliveryComplete: %d\n",deliveryComplete);

%End of the function.

end

%demo.m

%Call the function for the output 0.

CheckDelivery(10,11);

%Call the function for the output 1.

CheckDelivery(10,10);

function deliveryComplete = CheckDelivery(bricksDelivered, bricksExpected)

   deliveryComplete = 0;

   if bricksDelivered == bricksExpected

       deliveryComplete = 1;

   end

end

See more about python at brainly.com/question/18502436

#SPJ1

Simply put, an algorithm is a series of processes used to solve a problem. The steps are often a "case-type declaration," a "sequence," a "selection," and a "iteration."

An algorithm is a method for addressing a problem that specifies the activities to be taken and the order in which they should be taken. Simply put, an algorithm is a series of processes used to solve problems. The steps are often a "case-type declaration," a "sequence," a "selection," and a "iteration."

Sequence statements are imperatives in the C language. Iteration is satisfied by a number of statements, including "while," "do," and "for," while the case-type statement is satisfied by the "switch" statement. The "selection" is the "if then else" statement.

Pseudocode is a made-up, informal language that aids in the creation of algorithms by programmers. A "text-based" detail (algorithmic) design tool is pseudocode.

The Pseudocode rules are not too complicated. Statements that demonstrate "dependence" must all be indented.

To know more about Pseudocode click here:

https://brainly.com/question/13208346

#SPJ4

Answer:

- hping

- tcpreplay

Explanation:

Collate is the printer setting that enables several copies of the a document to be written in site 1, page 2, and page 3 order as opposed simply printing all of page 1, all of page 2, and then all of page 3.

What is a printer?

A printer is a computer accessory that creates a permanent representation of text or graphics typically on paper. Although the majority of output is understandable by humans, bar code scanners are an example of the a printer's wider application.  3d printing, inkjet printers, laser printers, and heat printers are a few of the several types of printers.

To know more about printer
https://brainly.com/question/5039703
#SPJ1

The current concern regarding the advancement of quantum computing, is existing cryptography may be easily cracked. Correct answer: letter D.

This is due to its ability to quickly process large amounts of data and solve complex mathematical problems. This means that existing cryptography could be quickly and easily cracked by a quantum computer, potentially compromising the security of sensitive information.

Is a type of computing that uses quantum-mechanical phenomena, such as superposition and entanglement, to perform operations on data. It has the potential to significantly outperform traditional computing systems in certain tasks. Quantum computing is still in its infancy, but has the potential to revolutionize the way we compute.

Learn more about quantum computing:

https://brainly.com/question/15188300

#SPJ4

The command that can be used to display any email messages awaiting delivery alongside the reason that they were not delivered is known as Mailq.

Email stands for Electronic mail. It may be defined as a type of method that significantly involves the exchange of computer-stored messages from one user to one or more recipients via the internet.

The command "Mailq" stands for mail queue. It is the command in Linux that prints the queued mail gain in form of sending it to the user. This command prints a list of messages that are in the mail queue. It is the same as the Sendmail-bp command.

Therefore, "mailq" is the command that can be used to display any email messages awaiting delivery alongside the reason that they were not delivered.

To learn more about Email, refer to the link:https://brainly.com/question/24688558

#SPJ1

Renewable energy opens opportunities for democratic energy development. •. Tensions for energy democracy concern governance, technologies

On-premises computing means the organization owns their IT infrastructure and maintains it in their data centers. This approach allows the organization to customize their IT infrastructure to their specific needs and to control their IT environment.

This also allows the organization to be more agile and to respond quickly to changing business requirements. On-premises computing also allows the organization to maintain the highest levels of data security and to ensure that all of their data is protected and secure.

Additionally, on-premises computing allows the organization to reduce long-term costs by eliminating the need for additional hardware and software licenses, as well as the need to pay for additional cloud storage services. Finally, on-premises computing allows the organization to have greater control over their IT infrastructure and the services that it provides.

Learn more about Computing: https://brainly.com/question/23275071

#SPJ4

returntype methodname(){  

//code to be executed  

methodname();//calling same method  

}  

Java Recursion Example 1: Infinite times

public class RecursionExample1 {  

static void p(){  

System.out.println("hello");  

p();  

}  

public static void main(String[] args) {  

p();  

}  

}  

What is Recursion in Java?

The technique of making a function call itself is known as recursion. This technique allows you to break down complex problems into simpler ones that are easier to solve.

Adding two numbers is simple, but adding a range of numbers is more difficult. Recursion is used in the following example to add a range of numbers together by breaking it down into the simple task of adding two numbers:

public class Main {

 public static void main(String[] args) {

   int result = sum(10);

   System.out.println(result);

 }

 public static int sum(int k) {

   if (k > 0) {

     return k + sum(k - 1);

   } else {

     return 0;

   }

 }

}

To know more about Java Recursion, visit: https://brainly.com/question/14367547

#SPJ4

Sizing handles are the white circles that show up on a placeholder's sides and corners and allow the user to modify the object's height and width.

What is sizing handles ?

Users can resize an object using the sizing handle, also known as a handle, drag handle, sizing grip, or resize corner, which is a GUI (graphical user interface) tool. For instance, the Microsoft Windows operating system typically contains a size handle in the window's lower-right corner, as seen in the illustration. The window's size can be altered by clicking and dragging this indicator.

When using an image editor, handles are tiny black boxes that can be found all along an image's border. The size can be increased horizontally, vertically, or diagonally depending on where they are placed. Eight handles are available to the user in this image editor, one on each corner and one in the middle of each edge, as shown in the example image. There are two names for this user interface: The Transform Tool and Free Transform.

To know more about graphical user interface, check out:

https://brainly.com/question/14758410

#SPJ1

The HTML code for an event handler that changes the background color of the h1 tag to gold on mouseout is provided below:

Coding Part:

var h1Element = document.getElementsByTagName("h1")[0];

h1Element.addEventListener("mouseout", function() { h1Element.style.backgroundColor='gold'; };

What exactly is an event handler?

Events are signals that are sent from within the browser window to notify the user of changes in the browser or operating system environment. Programmers can write event handler code that runs when an event occurs, allowing web pages to respond appropriately to changes.

This page is intended to serve as a "reminder" of how to use events and event handlers.

Events are documented on the pages for the JavaScript objects that emit them as well as those that come after them.

To know more about Event handler, visit: brainly.com/question/20169706

#SPJ4

​On circuit switched portions of a PSTN, the set of standards that are established by the ITU which is used to handle call signaling is: D. SS7

In Computer technology, a modem can be defined as a type of networking device that is designed and developed to convert the signals from the wire such as a telephone line, so that data can be sent and received by a computer.

In Computer networking, a modem simply refers to a network connectivity device that must be used by an end user to access the Internet through an internet service provider (ISP) or the Public Telephone Service Network (PSTN).

In conclusion, SS7 is an abbreviation for Signaling System 7 and it can be defined as a set of standards that is established by the International Telecommunication Union (ITU) in order to effectively and efficiently handle call signaling on circuit switched portions of a Public Telephone Service Network (PSTN).

Read more on modem here: brainly.com/question/7320816

#SPJ1

Complete Question:

​On circuit switched portions of a PSTN, what set of standards established by the ITU is used to handle call signaling? (A) ​MCU (B) ​H.323 (C) ​H.225 D. SS7

The Windows Memory Diagnostic Tool is used to check the defect in the Memory RAM which is by default installed in the latest version.

To learn more about windows 7 refer to:

https://brainly.com/question/14103767

#SPJ4

Your data may typically be recovered from an initialized disk. After dividing the drive, keep in mind that you must restore data to a new place to prevent data loss. If data recovery efforts are unsuccessful, you can try again by restoring a prior disk backup.

Disk: A non-volatile data storage device is a computer hard disk drive (HDD).

Disk pack :Hard disk platters are arranged in a tiered pack called a disk pack.

Track: smaller than a road and frequently having an uneven surface, a track

Block: A solid object (such as a piece of stone or wood) that typically has one or more flat sides.

Cylinder: a Three-dimensional solid shape with two identical circular bases is known as a cylinder.

Sector:A sector is an economic area where enterprises engage in the same or similar types of operations, goods, or services.

Interlock gap; Concrete pavers that interlock are made with gaps between each stone as a special feature.

Read/write head; A hard disk's read/write head is a particular physical component that is in charge of both reading data from and writing data to the disk.

There are two different kinds of variable initialization: explicit and implicit. If a variable receives a value in the declaration statement, it has been explicitly initialized. Implicit initialization occurs when processing gives variables values.

So, Initialization prepares the hardware for an operating system to take over. An operating system manages the memory, processing time, and peripherals.

Learn more about disk here:

brainly.com/question/1483866

#SPJ1

Answer: false

Explanation:

To improve the company's information security program need to create a comprehensive security policy and implement strong firewalls.

STEP :

1. Create a comprehensive information security policy that outlines acceptable use of company resources and data.

2. Educate all staff on the importance of protecting data and the risks of not doing so.

3. Implement access control procedures such as multi-factor authentication, password complexity requirements, and regular password changes.

4. Implement strong perimeter security measures such as firewalls, intrusion detection systems, and antivirus software.

5. Establish regular auditing and monitoring of the system to detect any unauthorized access or usage of data.

6. Establish a process for responding to security incidents, including reporting, investigation, and remediation.

7. Implement a secure backup and recovery system to protect against data loss.

8. Establish an incident response team to investigate and respond to any security incidents.

9. Regularly review and update the security policies and procedures to ensure compliance with changing regulations.

10. Develop a policy for the secure disposal of confidential data.

To know more about security :
https://brainly.com/question/28581015
#SPJ4

Run the Ford-Fulkerson method and take the residual graph into consideration. In the residual graph, identify the collection of vertices that may be reached from the source. Minimum cut edges are all edges that connect a reachable vertex to an unreachable vertex. Write down all such edges.

A vertex is a corner point formed by the junction of an object's edges, faces, or facets, and it can be a polygon, polyhedron, or any higher-dimensional polytope.  If the internal angle of the polygon—the angle produced by the two edges at the vertices with the polygon inside the angle

In general, a polyhedron or polytope vertex is convex if the intersection with a suitably small sphere centered at the vertex is convex and concave otherwise.

The edge with the highest weight in a spanning tree is called a bottleneck edge. If there isn't a spanning tree with a smaller bottleneck edge weight in the graph, the tree is a minimum bottleneck spanning tree. A comparable issue is known as Minimum Bottleneck Spanning Arborescence for directed graphs (MBSA).

Therefore, All edges connect a reachable vertex to an unreachable vertex. Write down all such edges.

Learn more about vertex here:

https://brainly.com/question/29030495

#SPJ1

A constructor is a method that c: 'performs initialization or setup operations'.

In object-oriented programming, a constructor is a special type of method called to create an object. The constructor prepares the new object for use, often accepting arguments that are used by the constructor to set required member variables. Constructors have the same name as that of the declaring class. Constructors have the key task of initializing the data members of the object and setting up the operations to be performed on them.

You can learn more about constructor at

https://brainly.com/question/13267121

#SPJ4

Using the knowledge in computational language in SQL it is possible to write a code that write the SQL to build a database schema to support the following business operations.

INSERT INTO EMPLOYEE values(1, 'Adam', 'Address1', 'Doctor');

INSERT INTO EMPLOYEE values(2, 'Denis', 'Address2', 'Doctor');

INSERT INTO EMPLOYEE values(3, 'Mancy', 'Address3', 'Doctor');

INSERT INTO EMPLOYEE values(4, 'DIana', 'Address4', 'Nurse');

INSERT INTO EMPLOYEE values(5, 'Kerry', 'Address5', 'Nurse');

INSERT INTO EMPLOYEE values(6, 'Losti', 'Address6', 'Nurse');

INSERT INTO EMPLOYEE values(7, 'Handin', 'Address7', 'Nurse');

INSERT INTO EMPLOYEE values(8, 'Gray', 'Address8', 'Receptionist');

INSERT INTO EMPLOYEE values(9, 'Sonny', 'Address9', 'Receptionist');

INSERT INTO EMPLOYEE values(10, 'Emy', 'Address10', 'Receptionist');

INSERT INTO EMPLOYEE values(11, 'Liza', 'Address11', 'Receptionist');

INSERT INTO DOCTOR values (1, 'Surgen', 'MAsters');

INSERT INTO DOCTOR values (2, 'Neologist', 'M Bsc');

INSERT INTO DOCTOR values (3, 'Gynic', 'MBBS');

INSERT INTO NURSE values(4, 'GNM', 1);

INSERT INTO NURSE values(5, 'ANM', 1);

INSERT INTO NURSE values(6, 'DenMB', 2);

INSERT INTO NURSE values(7, 'BSC', 3);

INSERT INTO RECEPTIONIST values(8, 'English', 5, 1);

INSERT INTO RECEPTIONIST values(9, 'English', 1, 2);

INSERT INTO RECEPTIONIST values(10, 'French', 15, 1);

INSERT INTO RECEPTIONIST values(11, 'English', 10, 3);

See more about SQL at brainly.com/question/19705654

#SPJ1

Malicious software that replicates itself on other computers is known as a worm.

Any program or file that purposefully harms a computer, network, or server is referred to as malicious software, commonly known as malware.

Malware can take the form of spyware, ransomware, worms, trojan horses, and computer viruses. These dangerous applications hack computers, take important data, encrypt it, and delete it. They also change or hijack essential computing operations and track end users' online behavior.

Worms are software applications that reproduce themselves from one machine to another without using a host file. As opposed to viruses, which propagate through the host file they infect. Although worms typically reside within other files, frequently Word or Excel documents, there is a difference between how worms and viruses use the host file.

The worm typically releases a document that already contains the worm macro. Since the complete page will spread from computer to computer, it should be regarded as the worm.

To know more about worms visit:

https://brainly.com/question/12980616

#SPJ4

IPv4 unicast routes are supported for static routing SVI configuration using the LAN Base routing template.

To learn more about LAN Base routing refer

brainly.com/question/14294134

#SPJ4

config-register is the command used change the order of the router that looks for system bootstrap information.

To learn more about bootstrap refer to :

https://brainly.com/question/3521335

#SPJ4

The option is not an example of multi-factor authentication is option C: using your voice-print to access your phone.

Multi-factor authentication is a tiered strategy to protecting data and applications in which a system requests a user to login using a combination of two or more credentials.

A user is only permitted access to a website or application using the multi-factor authentication electronic authentication method after successfully submitting two or more pieces of evidence to an authentication mechanism, including knowledge, ownership, and inherence.

Therefore, These elements comprise:

Based on the option above, you can see that it is just one function and not two or three hence is the odd one out.

Learn more about multi-factor authentication from

https://brainly.com/question/14330595
#SPJ1

A reasonable proposed solution would be to uninstall and reinstall Microsoft Word to see if that resolves the issue. If the issue persists, it may be necessary to run a virus scan and an antimalware scan to ensure that there are no malicious programs on the computer that are causing the issue.

Additionally, updating the operating system and ensuring that the computer is running the latest version of Microsoft Word may also help to solve the issue.

Is a powerful word processing application that provides users with a wide range of features to create professional-looking documents. It has a user-friendly interface and offers tools to help users format and organize their documents, including:

Microsoft Word also offers a variety of tools to help users collaborate, including the ability to share documents with other users, track changes, and comment on documents.

Learn more about Microsoft Word:

https://brainly.com/question/20659068

#SPJ4

The line with the corresponding statement that will throw an error in the following Java code is mentioned below:

Compilation failed due to following error(s).

Main.java:2: error: illegal start of type

public:

Main.java:5: error: illegal start of type

private:

Main.java:10: error: class, interface, or enum expected

void Student::Display() {

Main.java:12: error: class, interface, or enum expected

Main.java:19: error: class, interface, or enum expected

Main.java:22: error: class, interface, or enum expected

stu1.Display();

Main.java:23: error: class, interface, or enum expected

Main.java:25: error: class, interface, or enum expected

Main.java:27: error: class, interface, or enum expected

b. stu1.Display();

Main.java:28: error: class, interface, or enum expected

c. int Student::Grade()

Main.java:31: error: class, interface, or enum expected

11 errors

To know more Java, visit: https://brainly.com/question/25458754

#SPJ4

Answer:

real estate owned

Explanation:

hope it helps!

There was no flag in the Re-Create Feature Branch option.

To learn more about deleting a custom object refer to:

https://brainly.com/question/29215750

#SPJ4