Zinc (Zn) has less than 34 protons, 30 to be exact, and is a transition metal in Group 12. Note: it is also called a "post-transition metal."
Why is balance important in organisms?
Which of the following is the correct chemical equation and is properly balanced for:
Iron III oxide reacts with potassium iodide to produce iron III iodide and potassium oxide
Answer:are there any abc or do you have to make an answer?
Explanation:
How many neutrons does calcium have?
.20. 60. 79. 40
Answer:
20
Explanation:
Atomic number/proton number = 20 (protons in nucleus)
Atomic mass number = 40 (protons + neutrons in nucleus)
40 - 20 = 20
CHCl3 has how many double bonds?
Answer:
It has two sigma bonds ( the single bonds between each H and C) plus one pi bond and one sigma bond that consitute the double bond between C and O. It contains three covalent bonds, one . Hydrogen Bond Donor Count: 0: Computed by Cactvs 3.4.
Explanation:
Hope it helps you!
10 points
What is the molar mass of argon?
Answer:
39.948 u
Explanation:
Solve and show work. Li2S + 2 HNO3 --> 2 LiNO3 + H2S (a) Calculate the mass of lithium sulfide that will react with 250 mL of 0.65 M nitric acid (b) How many mL of 9.6 M HNO3 are needed to make 250 mL of 0.65 M HNO3 solution? (c) How many grams of nitric acid are needed to make 750 mL of 9.6 M HNO3.
Li2S + 2 HNO3 --> 2 LiNO3 + H2S
Li2 S + H2 N2 O2 --> Li2 N2 O5 + H2 S
Li S + H2 N2 O5 -> Li N2 O5 + H2 S
Li2 S2 + H4 N4 O10 --> Li2 N4 O10 + H4 S2
Li^2 S^2 + H^4 N^4 O^10 --> Li^2 N^4 O^10 + H^4 S^2
Are humans more similar to trees or bacteria? How do you know?(1 point)
A
Humans are more similar to bacteria because trees cannot move around their environment.
B
Humans are more similar to trees because bacteria are too small to see.
C
Humans are not similar to trees or bacteria. Humans are a special species that is not related to any other species on Earth.
D
Humans are more similar to trees because all plants and animals are part of the same domain.
Answer:
Humans and trees are interdependent - we breathe in oxygen and breathe out carbon dioxide, while trees take in carbon dioxide and release oxygen.
Humans have about a thousand genes similar to those of bacteria, presumably because the genes are so vital that their DNA structure has remained much the same over millions of years of descent from a common ancestor.
Explanation:
please if you know help
please
the formula of copper sulfate crystals is CuSo4.5H2O. 400ml of 0.02mol/l copper (ii) sulfate solution is needed to be prepered .
a. calculate the molar mass of the solute .
b. calculate the mass of the solute that sould be weighted to prepare this solution .
c. describe in details the steps of preperation of the solution
Answer: a. 249.5 g/mol
b. 1.996 g
c. Measure 1.996 g of [tex]CuSO_4.5H_2O[/tex] and dissolve in water until the volume is 400 ml
Explanation:
Molar mass is the sum of atomic masses of all the elements present.
Thus molar mass of [tex]CuSO_4.5H_2O[/tex] = 1(63.5)+1(32)+4(16)+5(18) = 249.5 g/mol
Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.
To calculate the number of moles for given molarity, we use the equation:
[tex]\text{Molarity of the solution}=\frac{\text{given mass of solute}\times 1000}{\text {Molar mass of solute}}\times \text{Volume of solution in ml}}[/tex]
[tex]0.02mol/L=\frac{x\times 1000}{249.5g/mol\times 400}[/tex]
[tex]x=1.996 g[/tex]
c. We need to measure 1.996 g of [tex]CuSO_4.5H_2O[/tex] and dissolve it in water to make the volume 400 ml.
How much will atmospheric carbon change in one year?
Answer:
Carbon dioxide is a greenhouse gas: a gas that absorbs heat. Warmed by sunlight, Earth’s land and ocean surfaces continuously radiate thermal infrared energy (heat). Unlike oxygen or nitrogen (which make up most of our atmosphere), greenhouse gases absorb that heat and release it gradually over time, like bricks in a fireplace after the fire goes out. Without this natural greenhouse effect, Earth’s average annual temperature would be below freezing instead of close to 60°F. But increases in g...
Explanation:
True or False: Different substances, like shortening and soap, will melt at the same temperature. True False
Answer:
false
Explanation:
different things will have different melting points
Explain the ways that carbon dioxide is added to the atmosphere. How is it removed? Does most carbon enter the atmosphere as carbon dioxide or is it in another form? How do increased levels of carbon dioxide in the atmosphere affect the earth?
Answer:
Carbon dioxide is added to the atmosphere by human activities. When hydrocarbon fuels (i.e. wood, coal, natural gas, gasoline, and oil) are burned, carbon dioxide is released. During combustion or burning, carbon from fossil fuels combine with oxygen in the air to form carbon dioxide and water vapor.Carbon moves from fossil fuels to the atmosphere when fuels are burned. When humans burn fossil fuels to power factories, power plants, cars and trucks, most of the carbon quickly enters the atmosphere as carbon dioxide gas. Each year, five and a half billion tons of carbon is released by burning fossil fuels.Carbon dioxide causes about 20 percent of Earth's greenhouse effect; water vapor accounts for about 50 percent; and clouds account for 25 percent.Likewise, when carbon dioxide concentrations rise, air temperatures go up, and more water vapor evaporates into the atmosphere—which then amplifies greenhouse heating
what dose the atomic number of an element represent
Answer:
No. of electrons of the element
Give 3 examples of a solution
Answer:
Comrade, figures, and sad
Explanation
The solution of sugar, salt etc in water.
Sublimation of substances like iodine, camphor etc into the air.
Hydrated salts, mercury in amalgamated zinc,
Alcohol in water, benzene in toluene
HELPPPP A student has 32.3 g of carbon dioxide (CO2). How many moles of carbon
dioxide are contained in this sample?
Do you have the answers for this test ?!?Im taking it right now and grades are due this friday so I need to pass this test
HELP IS IT:
A.
Model 2 is an isotope; Model 3 is an ion
B.
Model 1 is an ion; Model 3 is an isotope
C.
Model 1 is an isotope; Model 2 is an ion
D.
Model 1 is an ion; Model 2 is an isotope
Answer:
i thjink its b
Explanation:
Which is the mass of 0.13 moles of potassium chloride, KCl
Answer:
9.69 grams
Explanation:
e
Answer:
9.69g KCl
Explanation:
[tex]0.13 molesKCl\frac{74.55gKCl}{1moleKCl} =9.69gKCl[/tex]
Which type of molecule is shown below?
The type of molecule is to be considered as the option a. Alkyne. And, the same is to be considered.
What is alkyne?In terms of the chemical compound, Alkynes refer to Molecules which comprise of the triple bond that arise between 2 carbon atoms.
Also, the triple bond should be made up of one σ bond and two π bonds.
hence, The type of molecule is to be considered as the option a. Alkyne. And, the same is to be considered.
Learn more about molecule here: https://brainly.com/question/16273896
please help as soon as possible!
Answer:
1st one
Explanation:
Answer:
B
Explanation:
chlorine 2×3= 6 not sure
Consider the following representation of a reaction mechanism.
Step 1: A+A → C+E (slow)
Step 2: E + B → A+D (fast)
Overall reaction: A + B → C + D
What should appear in the rate law for the reaction above?
A) only A and B because they are reactants in the overall reaction
B) only C and C because they are products in the overall reaction
C) only A because it is the reactant in the rate-determining step
D) only E and B because they are the reactants in the rate-determining step
Answer:
The rate determining step is step 1
Explanation:
In the rate law for the given reaction,
only A appears because it is the reactant in the rate-determining step.So, option C is correct one.
Which step is rate determining steps?The slowest steps is rate determining step of the reaction.It is because in rate determining step the intermediate is formed.What is intermediate ?The short lived species formed in the mechanism of reaction is called intermediate.The intermediates is formed in slowest step because it is unstable species.What is rate law for the reaction?The rate law is also known as rate equationIt is the expression that provides relationship between rate and concentration of the reaction in a chemical reaction.The rate law is determined by the experimentally.If the reaction occurs in multi steps then the rate of the reaction is depends upon slowest step of the reaction.learn about rate law,
https://brainly.com/question/4222261
#SPJ2
4 Which pair of ions is isoelectronic?
A Ca2+ and 02-
B Na+ and 02-
OC Lit and Cl-
OD Mg2+ and CI-
Answer:
B. Na+ and O2-
Explanation:
Na+ plus has 10 electrons and O2- also has 10 electrons
Calculate the reaction rate given the following:
After 2 minutes (120 seconds), the concentration of a product was measured to
increase from 0.0012 M to 1.48 M.
1.48 M/s
0.0123 M/s
0.0012 M/s
-0.0123 M/s
Answer:
0.0123 M/s
Explanation:
The reaction rate is the rate at which the reaction takes place and results in an increased concentration of the products. The rate of the reaction is 0.0123 M/s.
What is the reaction rate?
The reaction rate is the increase of the concentration of the product with respect to time in seconds. The rate of reaction is given by,
[tex]\rm rate = \rm \dfrac {\Delta C}{\Delta t}[/tex]
Given,
Change in product concentration = 1.478
Time period = 120 seconds
Substituting values in the above equation:
[tex]\begin{aligned} \rm rate &= \rm \dfrac {\Delta C}{\Delta t}\\\\& = \dfrac{1.478}{120}\\\\&= 0.0123 \end{aligned}[/tex]
Therefore, option B. 0.0123 M/s is the reaction rate.
Learn more about reaction rate here:
https://brainly.com/question/13440548
What is the molarity of a solution with a 10.0 g AgNO3 dissolved in 0.5 L of solution ?
PLEASE HELP ASAP!!!!!!!!!! WILL GIVE BRAINLIEST TO CORRECT ANSWER!
Read the given chemical reaction.
C2H6 + O2 → CO2 + H2O
How many moles of H2O are produced during the complete combustion of 1.4 moles of C2H6?
A. 5.6 moles
B. 2.8 moles
C. 7.0 moles
D. 4.2 moles
1. waves that use matter to transfer energy
2. rhythmic disturbance that carries
energy
3. waves in which matter in the medium
moves in the same direction as the wave
4. example of a compressional wave
5. example of a mechanical wave
6. The matter in the medium moves up
and down or back and forth at right
angles to the direction the wave travels.
7. waves that do not require matter
to carry energy
8. ripples on the surface of a pond
9.the matter though which a mechanical wave travels
10.vibration of vocal chords creates this
Definitions: a. Water wave
b. Compressional waves
c. Transverse wave
d. wave
e.mechanical wave
f. electromagnetic wave
g. Sound wave
h. medium
Please match all the terms in the right spot and btw you will be able to use the same term more then once’s
Answer:
1. e
2. d
3. b
4. g
5. g, a both work
6. c
7. f
8. a, d both work
9. h
10. g
Explanation:
Plz help guys ASAP!
Thanks in advance
Answer:
3.6 moles
Explanation:
The balanced equation for the reaction is given below:
N₂ + 3H₂ —> 2NH₃
From the balanced equation above,
1 mole of N₂ reacted with 3 moles of H₂ to produce 2 moles NH₃.
Next, we shall determine the limiting reactant. This can be obtained as follow:
From the balanced equation above,
1 mole of N₂ reacted with 3 moles of H₂.
Therefore, 3.2 moles of N₂ will react with = 3.2 × 3 = 9.6 moles of H₂.
From the calculation made above, we can see that it will take a higher amount (i.e 9.6 moles) of H₂ than what was given (i.e 5.4 moles) to react completely with 3.2 moles of N₂.
Therefore, H₂ is the limiting reactant and N₂ is the excess reactant.
Finally, we the greatest quantity of ammonia, NH₃ produced from the reaction.
In this case, the limiting reactant will be use because all of it is consumed in the reaction.
The limiting reactant is H₂ and greatest quantity of ammonia, NH₃ produced can be obtained as follow:
From the balanced equation above,
3 moles of H₂ reacted to produce 2 moles NH₃.
Therefore, 5.4 of H₂ will react to produce = (5.4 × 2)/3 = 3.6 moles of NH₃
Thus, the greatest quantity of ammonia, NH₃ produced from the reaction is 3.6 moles
What is the organelle that contains DNA?
golgi apparatus
ribosomes
endoplasmic reticulum
chromosomes
6) What causes the stars to give off light when ignited?
Answer:
When fireworks explode in the sky, the gunpowder reactions create a lot of heat, causing the metallic substances pres- ent in the stars to absorb energy from the heat and emit light. ... These electrons absorb energy from the heat, which causes them to move from their original ground-energy state to an excited state.
Explanation:
:))
The process which generates energy in sun and other stars is nuclear fusion. The emission of light energy is thus the result of fusion reaction taking place in stars.
What is nuclear fusion?Nuclear fusion is a chemical process in which two light nuclei or isotopes of an atom fuse together to form a heavy nuclei with the release of million tons of energy.
The process in which a heavy atom breaks into lighter atoms is called nuclear fusion and it is also releasing massive energy but less than the from fusion because, the breaking of chemical bonds needs some energy to absorb.
Fusing two chemical bonds is needs no more energy and it is an energy releasing process. Millions of hydrogen atoms and its isotopes fuse together in several steps and form helium atoms.
This process of release million tons of heat energy and light energy. This will make the stars glow.
To find more about nuclear fusion, refer the link below:
https://brainly.com/question/12701636
#SPJ2
What are 2 facts about neon
Identify the elements that make up water and ozone .Name the element common between the two molecules .
Answer: Water is made up of elements hydrogen and oxygen. Ozone is made up of element oxygen. The common element between them is oxygen.
Explanation:
Element is a pure substance which is composed of atoms of similar elements. It can not be decomposed into simpler constituents using chemical reactions.Example: Hydrogen (H)
Water and ozone are compounds which are formed by the combination of elements in fixed ratio by mass.Water and ozone have molecular formulas of [tex]H_2O[/tex] and [tex]O_3[/tex] respectively.Water is made up of elements hydrogen (H) and oxygen (O). Ozone is made up of element oxygen (O).
Thus the common element between them is oxygen (O).
How would adding the catalyst nitrogen monoxide (NO) affect this reaction?
2SO2(g) + O2(g) → 2SO3(g)
A.
NO increases the rate at which SO3 molecules are formed.
B.
NO reacts with SO3 to produce more SO2 molecules.
C.
NO decreases collisions between the SO2 and O2 molecules.
D.
NO increases the concentration of the SO2 and O2 molecules.
E.
NO increases the activation energy of the SO2 and O2 molecules
Answer:
C
Explanation:
Answer: A. NO increases the rate at which SO3 molecules are formed.
Explanation: I got this right on Edmentum.