Answer:
Mitochondria
Hydraulic Dams
Ribosomes
Small Shops
Nucleus
Town Hall
Endoplasmic Reticulum
Railroad Tracks
Golgi Bodies
Post Office
Cytoplasm
Clean Air and Water
Protein
Widget
Cell Membrane
Fence
Lysosomes
Scrap Yard
Nucleolus
Carpenter's Union
Vacoule
Warehouse
here is some ideas
water and Air are needed for iron rust answer true or false
Answer:True
Explanation:
PLZ GIVE ME BRAINLIEST, I NEED IT
How many moles are in 454 Liters of a gas?
Answer:
20.27 mol
Explanation:
454 L x (1 mol/22.4 L) = 20.27 mol
Be sure to answer all parts. For an aqueous solution of sodium chloride (NaCl), determine the molarity of 4.05 L of a solution that contains 195 g of sodium chloride. M Determine the volume of this solution that would contain 4.63 moles of sodium chloride. L Determine the number of moles of sodium chloride in 25.35 L of this solution. mol
Answer:
[tex]0.824\ \text{M}[/tex]
[tex]5.62\ \text{L}[/tex]
[tex]20.89\ \text{mol}[/tex]
Explanation:
Molar mass of NaCl = 58.44 g/mol
Mass of NaCl = 195 g
Volume of solution = 4.05 L
Molarity of solution is
[tex]\dfrac{195}{4.05}\times \dfrac{1}{58.44}=0.824\ \text{M}[/tex]
The molarity of the solution is [tex]0.824\ \text{M}[/tex]
Moles of NaCl = 4.63 mol
Volume is given by
[tex]\dfrac{4.63}{0.824}=5.62\ \text{L}[/tex]
The volume of the solution that contains the required amount NaCl is [tex]5.62\ \text{L}[/tex]
Volume of solution = [tex]25.35\ \text{L}[/tex]
Moles of solution is given by
[tex]0.824\times 25.35=20.89\ \text{mol}[/tex]
The number of moles of NaCl is [tex]20.89\ \text{mol}[/tex].
3. Determine the enthalpy of formation for propane. 3C(s, gr) + 4H2(g) ---> C3H2(g) CzH3(g) AH = -2219.9 kJ C(s, gr) AH = -393.5 kJ H,(g) AH = -285.8 kJ a. -205.7 /mol b. -103.8 kJ/mol Å C. + 205.7 /mol d. + 103.8 /mol
Answer:
b I hope this is right good luck
Question 6 of 30 Carbon dioxide subliming is an example of which of the following?
Answer:
dry ice or solid carbon(iv)oxide
Explanation:
carbon(iv)oxide that sublimes is known as dry ice or solid CO2 and it is used to refrigerate food instead of ordinary ice which will just melt when exposed to hot conditions and there4 will lead to the destruction of food. dry ice will sublime the moisture from the food there4 keeping out any moisture
Addition of sugar to water will result in increase of boiling point
TRUE OR FALSE
Answer:
true
Explanation:
b) A piece of solid gold was heated from 274K to 314K using 55.7J of energy to raise the
temperature. What mass of gold was present?
Answer:
Explanation:
So we know q = mc[tex]\Delta[/tex]T.
q = 55.7 J
c = 0.129j/g°C
and [tex]\Delta[/tex]T = 314-274 = 40°C.
and m is mass which can solve since we got every other variable. We will get m = 10.8g.
1.20×10−8s to nanoseconds
Answer:
There are 12 nanoseconds in [tex]1.2\times 10^{-8}\ s[/tex].
Explanation:
We need to convert [tex]1.2\times 10^{-8}\ s[/tex] to nanoseconds.
We know that,
[tex]1\ s=10^9\ ns[/tex]
Now using unitary method to solve it such that,
[tex]1.2\times 10^{-8}\ s=1.2\times 10^{-8}\ \times 10^9\\\\=1.2\times 10\\\\=12\ ns[/tex]
So, there are 12 nanoseconds in [tex]1.2\times 10^{-8}\ s[/tex].
A 38.22 mL aliquot of weak acid that has a concentration of 0.882 M will be titrated with 0.289 M NaOH. Calculate the pH of of the solution upon neutralization of half of the weak acid. The Ka of the acid is 6.8×10-7.
Answer:
pH = 6.167
Explanation:
The weak acid, HX, reacts with NaOH as follows:
HX + NaOH → NaX + H₂O
Where 1 mole of HX with 1 mole of NaOH produce 1 mole of NaX (The conjugate base of the weak acid).
Now, using H-H equation:
pH = pKa + log [NaX] / [HX]
Where pH is the pH of the buffer
pKa is -log Ka = 6.167
And [NaX] [HX] are the molar concentrations of each specie
Now, at the neutralization of the half of HX, the other half is as NaX, that means:
[NaX] = [HX]
And:
pH = pKa + log [NaX] / [HX]
pH = 6.167 + log 1
pH = 6.167Although the Devil's Finger Fungus looks much like a plant, it is classified
in the kingdom Fungi. Which is a characteristic of fungi that is not found
in organisms of the plant kingdom?
Select one:
О
Their cells have a nucleus
O
They are heterotrophic
O
Their cells have cell walls
о
The are multicellular
Answer:
O the multicellular
Explanation:
sana nakatulong
Given all properties are present in both plant kingdom as well as on fungi kingdom species.
What are cells?Cells are the functional and fundamental unit of any organism which may be they are from plants and animals.
In the fungi kingdom and plant kingdom, both species will have nucleus in their cells and they also have multi cells in their structure only except yeast and it belongs from fungi family. Cell are covered by the cell walls and they both are heterotrophic in nature.
Hence given all properties are present in both species.
To know more about fungi kingdom, visit the below link:
https://brainly.com/question/10878050
The different unit cell types have a different packing efficiency. The simple cubic has the least efficient packing and the face-centered cubic has the most efficient packing (sometimes the face-centered cubic is called cubic closest packing). You can determine what percent of the unit cell is occupied by (1) determining the volume of the whole unit cell and (2) determining the volume of the occupied space by the atoms in the unit cell. Remember that the volume of a cube is V
Answer:
The answer is "52.8".
Explanation:
Please find the graph file in the attachment.
They have the atoms in 8 corners with one unit cell in an one so mesh (SCC).
Atoms throughout the corner contribute [tex]\frac{1}{8}[/tex]to both the cell unit
Atom number per SCC unit cell, [tex]Z = (8 \times \frac{1}{8}) = 1[/tex]
Let 'r' become the atom's radius. [tex]r = 3.43\times 10^{-8}\ \ cm[/tex]
We can see from the diagram that edge length [tex]AB = a = 2r[/tex]
[tex]Packing\ efficiency = \frac{(1 \ atom \ Volume \times Z)}{Volume \ of \ unit\ cell \times 100}\\\\[/tex]
[tex]= \frac{\frac{4}{3}\times \pi \times r^3 \times 1}{a^3 \times 100}\\\\=\frac{\frac{4}{3}\times \pi \times r^3 \times 1}{(2r)^3 \times 100} \\\\=\frac{\frac{4}{3}\times \pi \times( 3.43\times 10^{-8}cm)^3 \times 1}{(2\times 3.43\times 10^{-8}cm)^3 \times 100}\\\\= 52.8 \%[/tex]
What is the formal charge on the phosphorus in the PO43- polyatomic ion?
Answer:
P has a formal charge of 0
Explanation:
Essentially P is in the middle of that ion, and its valence electrons are being used with the 4 Os. Hope that makes sense or helps at least. There's good videos that talk about how this works but I can't link them in brainly
What was the purpose of letting the transformed cells sit in LB for a few minutes before spreading them onto the plates?
A. This allows time for the cells to express the antibiotic resistance gene
B. This allows the cells to take up the plasmid after the heat shock procedure
C. This allows time for the cells to warm up before plating
D. This allows cells time to start glowing green
The weight for this compound is 74. what is the molecular formula
Explanation:
ur question is incomplete what elements make the compound and we talk of mass not weight and what are the units kjmol ,grams ,kgs
10. Which of the following group of colors of the visible light is listed from
lowest to highest frequency?
A. Blue, green, red
C. Red, violet, green
B. Green, blue, red
D. Red, green, violet
Answer:
The correct answer is - D. Red, green, violet.
Explanation:
Visible light is the spectrum of light that can be seen by the naked eyes of humans without any equipment. This spectrum has various frequency light that helps us see things in color. The frequency of light ranges between seven different colors in which violet has the highest frequency and red has the lowest.
The different frequencies are as follows:
color frequency
red (limit) 1.77
red 1.91
orange 2.06
yellow 2.14
green 2.25
cyan 2.48
blue 2.75
violet (limit) 3.10
On this basis of this the group of colors of the visible light is listed from
lowest to the highest frequency - Red, green, violet
How many molecules of O2 will be required to produce 28.8 g of water?
Coal, oil, and natural gas are called _______.
A.
fossil fuels
B.
renewable resources
C.
nuclear power
D.
solar energy
Answer:
I think it's A. I'm pretty sure.
Explanation:
Answer:
Coal, oil and natural gas are called _________A. fossil fuels
Zn(s), Zn(NO3)2 (0.3 M) || Cu(s), CuCl2 (0.5 M)
(Need help solving these questions, so I can solve the rest of the questions like this in my lab. It is greatly appreciated. Thank you)
2. Write the half reactions that occur at the anode and cathode in this electrochemical cell. Annotate which half reaction occurs at the anode and the cathode.
3. Write the overall balance reaction of this electrochemical cell.
4. Calculate E°cell of this electrochemical cell. (include units)
5. Calculate the reaction quotient (Q) of this reaction.
6. Calculate the expected Ecell for this reaction
Answer:
See Explanation
Explanation:
At the anode;
Zn(s) -----> Zn^2+(aq) + 2e
At the cathode;
Cu^2+(aq) + 2e ------> Cu(s)
Overall electrochemical reaction;
Zn(s) + Cu^2+(aq) ------> Zn^2+(aq) + Cu(s)
E°cell = E°cathode - E°anode
E°cell = 0.34 - (-0.76)
E°cell = 1.1 V
Q = [0.3 M]/[0.5 M]
Q = 0.6
From Nernst equation;
Ecell = E°cell - 0.0592/n log Q
Ecell = 1.1 - 0.0592/2 log (0.6)
Ecell = 1.1 - 0.0296 log (0.6)
Ecell = 1.11 V
Why do we test for free chlorine in drinking water?
Answer:
The presence of free chlorine in drinking water is correlated with the absence of most disease-causing organisms, and thus is a measure of the potability of water
please help me please
Answer:
Two advantages are: Its cheap and it is a renewable energy source. Two disadvantages are it's not windy everyday and it will take up a lot of space for windmills.
Explanation:
Which of the following is a metal?
a.
silicon, Si, Z = 14
b.
phosphorus, P, Z = 15
c.
thallium, Tl, Z = 81
d.
arsenic, Z = 33
e.
nitrogen, N, Z = 7
Answer:
A.................. I think the answer
Why is a rotting apple a reaction in which energy is neither absorbed nor released?
A. The chemical energy in the reactants is almost equal to the chemical energy in the products.
B. The chemical energy in the reactants is much greater than the chemical energy in the products.
C. The chemical energy in the reactants is much less than the chemical energy in the products.
( don’t send links, I won’t click them)
Please help:
An object rolled 15m/s for 3 seconds. How far did it roll?
Hey can someone pls help me answer these questions? It should be easy maybe. It’s just science. The question just won’t to know where you would put the arrow above to show the motion of the plates. Where would I put it?
Calculate the pOH of this solution. pH = 1.90 pOH =
Answer:
12.1Explanation:
Since the pH has been given, the pOH can be found by using the formula
pH + pOH = 14
pOH = 14 - pH
From the question we have
pOH = 14 - 1.9
We have the final answer as
12.1Hope this helps you
Answer:
12.10
Explanation:
I NEED HELP WITH THIS ASAPP
A 36.6-mol sample of Co represents how many atoms?
Answer:
2.20 x 10²⁵ atoms
Explanation:
Atoms of CO= 36.6-mol sample
From Avogadro's constant, which is
(6.022 × 10^ 23 atoms per mole)
Then
Number of atoms=[ 6.022 × 10^ 23 atoms/mole] × [36.6-mol]
= 2.20 x 10²⁵ atoms
Hence, number of atom is 2.20 x 10²⁵ atoms
Calculate the value of the equilibrium constant for the following system, where the concentrations of reactants and products are: [NO]=1.2x10^-3M , [NO2]=1.5x10-^1M , [N2O]=2.4x10^-3M
Answer:
The equilibrium constant is 2.08x10⁵
Explanation:
Based on the reaction:
3NO ⇄ N₂O + NO₂
The equilibrium constant, k, is defined as:
k = [NO₂] [N₂O] / [NO]³
Where the [] is the molarity in equilibrium of each specie.
Computing te values of the problem:
k = [1.5x10⁻¹M] [2.4x10⁻³M] / [1.2x10⁻³M]³
k = 2.08x10⁵
The equilibrium constant is 2.08x10⁵
Which of the following limits a population's growth?
Answer:
hereeee
Explanation:
Limitations to population growth are either density-dependant or density-independent. Density-dependent factors include disease, competition, and predation. Density-dependant factors can have either a positive or a negative correlation to population size.
Answer: environmental factors
Explanation:
What happens to the conductivity of water when a base is dissolved in it.
Answer:
See Explanation
Explanation:
The conductivity of water refers to how much it conducts electricity. The electrical conductivity of water increases as more ions are dissolved in it.
Hence, increase in concentration of dissolved ions improves the electrical conductivity of water.
Therefore, when a base (which is an ionic substance) is dissolved in water, the concentration of ions present increases and the conductivity of the solution increases accordingly since ions are charge carriers in solution.
The addition of a base to the sample results in an increase in the conductivity of the sample.
Conductivity can be defined as the transfer of charge by the sample. The sample has consisted of the ions that mediate the transfer of charge.
The sample with a high number of ions has consisted of high conductivity and vice versa. The dissolution of acid or base to the solution results in an increase in the number of ions in the solution, and thereby there has been an increase in the charge transfer.
Thus, with the increase in the charge transfer, there has been an increase in the conductivity of the sample.
For more information about the conductivity of the sample, refer to the link:
https://brainly.com/question/6072723