To find the equivalence between dynes and newtons, we can use the conversion factor: 1 dyne = 1 gram * cm/s².
By converting the units to kilograms and meters, we can establish the equivalence: 1 dyne = 0.00001 newton.
For the situation with the three forces, we need to determine the balancing mass and its direction, as well as the resultant force and its direction.
We can solve this using both the algebraic and graphical methods. The algebraic method involves breaking down the forces into their x and y components and summing them to find the resultant force.
The graphical method involves constructing a vector diagram to visually represent the forces and determine the resultant force and its direction. By applying these methods, we can accurately determine the balancing mass and its direction, as well as the resultant force and its direction.
Learn more about force here: brainly.com/question/30507236
#SPJ11
One long wire lies along an x axis and carries a current of 53 A in the positive × direction. A second long wire is perpendicular to the xy plane, passes through the point (0, 4.2 m, 0), and carries a current of 52 A in the positive z direction. What is the magnitude of the
resulting magnetic field at the point (0, 1.4 m, 0)?
The magnitude of the resulting magnetic field at the point (0, 1.4 m, 0) is approximately 8.87 × 10⁻⁶ T.
The magnetic field is a vector quantity and it has both magnitude and direction. The magnetic field is produced due to the moving electric charges, and it can be represented by magnetic field lines. The strength of the magnetic field is represented by the density of magnetic field lines, and the direction of the magnetic field is represented by the orientation of the magnetic field lines. The formula for the magnetic field produced by a current-carrying conductor is given byB = (μ₀/4π) (I₁ L₁) / r₁ ²B = (μ₀/4π) (I₂ L₂) / r₂
whereB is the magnetic field,μ₀ is the permeability of free space, I₁ and I₂ are the currents in the two conductors, L₁ and L₂ are the lengths of the conductors, r₁ and r₂ are the distances between the point where the magnetic field is to be found and the two conductors respectively.Given data:Current in first wire I₁ = 53 A
Current in second wire I₂ = 52 A
Distance from the first wire r₁ = 1.4 m
Distance from the second wire r₂ = 4.2 m
Formula used to find the magnetic field
B = (μ₀/4π) (I₁ L₁) / r₁ ²B = (μ₀/4π) (I₂ L₂) / r₂For the first wire: The wire lies along the x-axis and carries a current of 53 A in the positive × direction. Therefore, I₁ = 53 A, L₁ = ∞ (the wire is infinite), and r₁ = 1.4 m.
So, the magnetic field due to the first wire is,B₁ = (μ₀/4π) (I₁ L₁) / r₁ ²= (4π×10⁻⁷ × 53) / (4π × 1.4²)= (53 × 10⁻⁷) / (1.96)≈ 2.70 × 10⁻⁵ T (approximately)
For the second wire: The wire is perpendicular to the xy plane, passes through the point (0, 4.2 m, 0), and carries a current of 52 A in the positive z direction.
Therefore, I₂ = 52 A, L₂ = ∞, and r₂ = 4.2 m.
So, the magnetic field due to the second wire is,B₂ = (μ₀/4π) (I₂ L₂) / r₂= (4π×10⁻⁷ × 52) / (4π × 4.2)= (52 × 10⁻⁷) / (4.2)≈ 1.24 × 10⁻⁵ T (approximately)
The magnitude of the resulting magnetic field at the point (0, 1.4 m, 0) is the vector sum of B₁ and B₂ at that point and can be calculated as,
B = √(B₁² + B₂²)= √[(2.70 × 10⁻⁵)² + (1.24 × 10⁻⁵)²]= √(7.8735 × 10⁻¹¹)≈ 8.87 × 10⁻⁶ T (approximately)
To know more about magnitude:
https://brainly.com/question/28714281
#SPJ11
An unpolarized ray is passed through three polarizing sheets, so that the ray The passing end has an intensity of 2% of the initial light intensity. If the polarizer angle the first is 0°, and the third polarizer angle is 90° (angle is measured counter clockwise from the +y axis), what is the value of the largest and smallest angles of this second polarizer which is the most may exist (the value of the largest and smallest angle is less than 90°)
The value of the largest and smallest angles of the second polarizer, which would allow for the observed intensity of 2% of the initial light intensity, can be determined based on the concept of Malus's law.
Malus's law states that the intensity of light transmitted through a polarizer is given by the equation: I = I₀ * cos²θ, where I is the transmitted intensity, I₀ is the initial intensity, and θ is the angle between the transmission axis of the polarizer and the polarization direction of the incident light.
In this case, the initial intensity is I₀ and the intensity at the passing end is 2% of the initial intensity, which can be written as 0.02 * I₀.
Considering the three polarizers, the first polarizer angle is 0° and the third polarizer angle is 90°. Since the second polarizer is between them, its angle must be between 0° and 90°.
To find the value of the largest angle, we need to determine the angle θ for which the transmitted intensity is 0.02 * I₀. Solving the equation 0.02 * I₀ = I₀ * cos²θ for cos²θ, we find cos²θ = 0.02.
Taking the square root of both sides, we have cosθ = √0.02. Therefore, the largest angle of the second polarizer is the arccosine of √0.02, which is approximately 81.8°.
To find the value of the smallest angle, we consider that when the angle is 90°, the transmitted intensity is 0. Therefore, the smallest angle of the second polarizer is 90°.
Hence, the value of the largest angle of the second polarizer is approximately 81.8°, and the value of the smallest angle is 90°.
learn more about "intensity":- https://brainly.com/question/28145811
#SPJ11
A meter stick balances horizontally on a knife-edge at the 50.0 cm mark. With two 6.04 g coins stacked over the 21.6 cm mark, the g stick is found to balance at the 31.9 cm mark. What is the mass of the meter stick? Number i Units
12.08 g * 21.6 cm = M * 31.9 cm
M = (12.08 g * 21.6 cm) / 31.9 cm
M ≈ 8.20 g
The mass of the meter stick is approximately 8.20 grams.
Let's denote the mass of the meter stick as M (in grams).
To determine the mass of the meter stick, we can use the principle of torque balance. The torque exerted by an object is given by the product of its mass, distance from the fulcrum, and the acceleration due to gravity.
Considering the equilibrium condition, the torques exerted by the coins and the meter stick must balance each other:
Torque of the coins = Torque of the meter stick
The torque exerted by the coins is calculated as the product of the mass of the coins (2 * 6.04 g) and the distance from the fulcrum (21.6 cm). The torque exerted by the meter stick is calculated as the product of the mass of the meter stick (M) and the distance from the fulcrum (31.9 cm).
(2 * 6.04 g) * (21.6 cm) = M * (31.9 cm)
Simplifying the equation:
12.08 g * 21.6 cm = M * 31.9 cm
M = (12.08 g * 21.6 cm) / 31.9 cm
M ≈ 8.20 g
Therefore, the mass of the meter stick is approximately 8.20 grams.
Learn more about torque:
https://brainly.com/question/17512177
#SPJ11
A mop is pushed across the floor with a force F of 41.9 N at an angle of 0 = 49.3°. The mass of the mop head is m = 2.35 kg. Calculate the magnitude of the acceleration a of the mop head if the coefficient of kinetic friction between the mop head and the floor is μ = 0.330. a = 3.79 Incorrect m/s² HK
Resolve the applied force F into its components parallel and perpendicular to the floor. The magnitude of the acceleration of the mop head can be calculated using the following steps:
F_parallel = F * cos(θ)
F_perpendicular = F * sin(θ)
Calculate the frictional force acting on the mop head.
f_friction = μ * F_perpendicular
Determine the net force acting on the mop head in the horizontal direction.
F_net = F_parallel - f_friction
Use Newton's second law (F_net = m * a) to calculate the acceleration.
a = F_net / m
Substituting the given values into the equations:
F_parallel = 41.9 N * cos(49.3°) = 41.9 N * 0.649 = 27.171 N
F_perpendicular = 41.9 N * sin(49.3°) = 41.9 N * 0.761 = 31.8489 N
f_friction = 0.330 * 31.8489 N = 10.5113 N
F_net = 27.171 N - 10.5113 N = 16.6597 N
a = 16.6597 N / 2.35 kg = 7.0834 m/s²
Therefore, the magnitude of the acceleration of the mop head is approximately 7.08 m/s².
Summary: a = 7.08 m/s²
To learn more about acceleration click here.
brainly.com/question/31946450
#SPJ11
If the net charge on the oil drop is negative, what should be
the direction of the electric field that helps it remain
stationary?
Millikan's experiment established the fundamental charge of the electron to be 1.592 x 10-19 coulombs, which is now defined as the elementary charge.
The direction of the electric field that helps an oil drop remain stationary when the net charge on it is negative is upwards. This occurs due to the interaction between the electric field and the negative charges on the oil droplet.
Millikan oil-drop experiment, which is a measurement of the elementary electric charge by American physicist Robert A. Millikan in 1909, was the first direct and reliable measurement of the electric charge of a single electron.
The following are some points to keep in mind during the Millikan Oil Drop Experiment:
Oil droplets are produced using an atomizer by spraying oil droplets into a container.
When oil droplets reach the top, they are visible through a microscope.
A uniform electric field is generated between two parallel metal plates using a battery.
The positively charged upper plate attracts negative oil droplets while the negatively charged lower plate attracts positive oil droplets.
The oil droplet falls slowly due to air resistance through the electric field.
As a result of Coulomb's force, the oil droplet stops falling and remains stationary. The upward electric force balances the downward gravitational force. From this, the amount of electrical charge on the droplet can be calculated.
Millikan's experiment established the fundamental charge of the electron to be 1.592 x 10-19 coulombs, which is now defined as the elementary charge.
To know more about fundamental charge of the electron, visit:
https://brainly.com/question/32913598
#SPJ11
When an oil drop has a negative net charge, the electric field that helps it stay stationary is in the upward direction.
Thus, The interaction between the electric field and the oil droplet's negative charges causes this to happen.
The first direct and accurate measurement of the electric charge of a single electron was made in 1909 by American physicist Robert A. Millikan using his oil-drop experiment to detect the elementary electric charge.
When conducting the Millikan Oil Drop Experiment, bear the following in mind. Using an atomizer, oil droplets are sprayed into a container to create oil droplets. Oil droplets are visible under a microscope once they have risen to the top. Between two people, a consistent electric field is created.
Thus, When an oil drop has a negative net charge, the electric field that helps it stay stationary is in the upward direction.
Learn more about Electric field, refer to the link:
https://brainly.com/question/11482745
#SPJ4
Given that d=4.3 meters and L=3.5 meters, determine the magnitude of the field at point P in N/C. Assume that P is at the midpoint between the spherical charge and the left edge of the rod.
The magnitude of the electric field at point P is 63 N/C.
The charge of the spherical charge (q_sphere) is 2 μC (2 x 10⁻⁶ C).
The charge of the rod (q_rod) is 5 μC (5 x 10⁻⁶ C).
The distance between the spherical charge and the rod (d) is 2 meters.
Step 1: Calculate the electric field contribution from the spherical charge.
Using the formula:
E_sphere = k * (q_sphere / r²)
Assuming the distance from the spherical charge to point P is r = d/2 = 1 meter:
E_sphere = (9 x 10⁹ N m²/C²) * (2 x 10⁻⁶ C) / (1² m²)
E_sphere = (9 x 10⁹ N m²/C²) * (2 x 10⁻⁶ C) / (1 m²)
E_sphere = 18 N/C
Step 2: Calculate the electric field contribution from the rod.
Using the formula:
E_rod = k * (q_rod / L)
Assuming the length of the rod is L = d/2 = 1 meter:
E_rod = (9 x 10⁹ N m²/C²) * (5 x 10⁻⁶ C) / (1 m)
E_rod = 45 N/C
Step 3: Sum up the contributions from the spherical charge and the rod.
E_total = E_sphere + E_rod
E_total = 18 N/C + 45 N/C
E_total = 63 N/C
So, the magnitude of the electric field at point P would be 63 N/C.
To know more about the Magnitude, here
https://brainly.com/question/28556854
#SPJ4
In the diagram below, each unit on the horizontal axis is 9.00 cm and each unit on the vertical axis is 4.00 cm. The equipotential lines in a region of uniform electric field are indicated by the blue lines. (Note that the diagram is not drawn to scale.)Determine the magnitude of the electric field in this region.
Determine the shortest distance for which the change in potential is 3 V.
The magnitudes of the currents through R1 and R2 in Figure 1 are 0.84 A and 1.4 A, respectively.
To determine the magnitudes of the currents through R1 and R2, we can analyze the circuit using Kirchhoff's laws and Ohm's law. Let's break down the steps:
1. Calculate the total resistance (R_total) in the circuit:
R_total = R1 + R2 + r1 + r2
where r1 and r2 are the internal resistances of the batteries.
2. Apply Kirchhoff's voltage law (KVL) to the outer loop of the circuit:
V1 - I1 * R_total = V2
where V1 and V2 are the voltages of the batteries.
3. Apply Kirchhoff's current law (KCL) to the junction between R1 and R2:
I1 = I2
4. Use Ohm's law to express the currents in terms of the resistances:
I1 = V1 / (R1 + r1)
I2 = V2 / (R2 + r2)
5. Substitute the expressions for I1 and I2 into the equation from step 3:
V1 / (R1 + r1) = V2 / (R2 + r2)
6. Substitute the expression for V2 from step 2 into the equation from step 5:
V1 / (R1 + r1) = (V1 - I1 * R_total) / (R2 + r2)
7. Solve the equation from step 6 for I1:
I1 = (V1 * (R2 + r2)) / ((R1 + r1) * R_total + V1 * R_total)
8. Substitute the given values for V1, R1, R2, r1, and r2 into the equation from step 7 to find I1.
9. Calculate I2 using the expression I2 = I1.
10. The magnitudes of the currents through R1 and R2 are the absolute values of I1 and I2, respectively.
Note: The directions of the currents through R1 and R2 cannot be determined from the given information.
For more such questions on magnitudes, click on:
https://brainly.com/question/30337362
#SPJ8
A parallel plate capacitor is charged to a potential of 3000 V and then isolated. Find the magnitude of the charge on the positive plate if the plates area is 0.40 m2 and the diſtance between the plate
The magnitude of the charge on the positive plate if the plates area is 0.40 m² and the diſtance between the plate is 0.0126 C.
The formula for the capacitance of a parallel plate capacitor is
C = εA/d
Where,C = capacitance,
ε = permittivity of free space,
A = area of plates,d = distance between plates.
We can use this formula to find the capacitance of the parallel plate capacitor and then use the formula Q = CV to find the magnitude of the charge on the positive plate.
potential, V = 3000 V
area of plates, A = 0.40 m²
distance between plates, d = ?
We need to find the magnitude of the charge on the positive plate.
Let's start by finding the distance between the plates from the formula,
C = εA/d
=> d = εA/C
where, ε = permittivity of free space
= 8.85 x 10⁻¹² F/m²
C = capacitance
A = area of plates
d = distance between plates
d = εA/Cd
= (8.85 x 10⁻¹² F/m²) × (0.40 m²) / C
Now we know that Q = CV
So, Q = C × V
= 3000 × C
Q = 3000 × C
= 3000 × εA/d
= (3000 × 8.85 x 10⁻¹² F/m² × 0.40 m²) / C
Q = (3000 × 8.85 x 10⁻¹² × 0.40) / [(8.85 x 10⁻¹² × 0.40) / C]
Q = (3000 × 8.85 x 10⁻¹² × 0.40 × C) / (8.85 x 10⁻¹² × 0.40)
Q = 0.0126 C
The magnitude of the charge on the positive plate is 0.0126 C.
Learn more about capacitor :
brainly.com/question/30614136
#SPJ11
Set 1: Gravitation and Planetary Motion NOTE. E Nis "type-writer notation for x10" ( 2 EB - Exam 2x10") you may use either for this class AND the AP GMm mu F GMm 9 G= 6.67 11 Nm /kg F = mg 9 GMm = mg GM 12 т GM V = 1 GM 9 GM V = - 21 T F 9 = mac T 1. A whale shark has a mass of 2.0 E4 kg and the blue whale has a mass of 1.5 E5 kg a. If the two whales are 1.5 m apart, what is the gravitational force between them? b. How does the magnitude of the gravitational force between the two animals compare to the gravitational force between each and the Earth? c. Explain why objects on Earth do not seem to be attracted 2. An asteroid with a mass of 1.5 E21 kg orbits at a distance 4E8 m from a planet with a mass of 6 E24 kg a. Determine the gravitational force on the asteroid. b. Determine the gravitational force on the planet. C Determine the orbital speed of the asteroid. d Determine the time it takes for the asteroid to complete one trip around the planet 3. A 2 2 14 kg comet moves with a velocity of 25 E4 m/s through Space. The mass of the star it is orbiting is 3 E30 kg a Determine the orbital radius of the comet b. Determine the angular momentum of the comet. (assume the comet is very small compared to the star) c An astronomer determines that the orbit is not circular as the comet is observed to reach a maximum distance from the star that is double the distance found in part (a). Using conservation of angular momentum determine the speed of the comet at its farthest position 4. A satellite that rotates around the Earth once every day keeping above the same spot is called a geosynchronous orbit. If the orbit is 3.5 E7 m above the surface of the and the radius and mass of the Earth is about 6.4 E6 m and 6.0 E24 kg respectively. According to the definition of geosynchronous, what is the period of the satellite in hours? seconds? a. Determine the speed of the satellite while in orbit b. Explain satellites could be used to remotely determine the mass of unknown planets 5. Two stars are orbiting each other in a binary star system. The mass of each of the stars is 2 E20 kg and the distance from the stars to the center of their orbit is 1 E7 m. a. Determine the gravitational force between the stars.. b. Determine the orbital speed of each star
In this set of questions, we are exploring the concepts of gravitation and planetary motion. We use the formulas related to gravitational force, orbital speed, and orbital radius to solve various problems.
Firstly, we calculate the gravitational force between two whales and compare it to the gravitational force between each whale and the Earth. Then, we determine the gravitational force on an asteroid and a planet, as well as the orbital speed and time taken for an asteroid to complete one orbit.
Next, we find the orbital radius and angular momentum of a comet orbiting a star, and also calculate the speed of the comet at its farthest position. Finally, we discuss the period of a geosynchronous satellite orbiting the Earth and how satellites can be used to determine the mass of unknown planets.
a. To calculate the gravitational force between the whale shark and the blue whale, we use the formula F = GMm/r^2, where G is the gravitational constant, M and m are the masses of the two objects, and r is the distance between them. Plugging in the values, we find the gravitational force between them.
b. To compare the gravitational force between the two animals and the Earth, we calculate the gravitational force between each animal and the Earth using the same formula.
We observe that the force between the animals is much smaller compared to the force between each animal and the Earth. This is because the mass of the Earth is significantly larger than the mass of the animals, resulting in a stronger gravitational force.
c. Objects on Earth do not seem to be attracted to each other strongly because the gravitational force between them is much weaker compared to the gravitational force between each object and the Earth.
The mass of the Earth is substantially larger than the mass of individual objects on its surface, causing the gravitational force exerted by the Earth to dominate and make the gravitational force between objects on Earth negligible in comparison.
Learn more about satellite click here:
brainly.com/question/28766254
#SPJ11
A two-stage rocket moves in space at a constant velocity of +4010 m/s. The two stages are then separated by a small explosive charge placed between them. Immediately after the explosion the velocity of the 1390 kg upper stage is +5530 m/s. What is the velocity (magnitude and direction) of the 2370-kg lower stage immediately after the explosion?
The velocity of the 2370-kg lower stage immediately after the explosion is -3190 m/s in the opposite direction.
Initially, the two-stage rocket is moving in space at a constant velocity of +4010 m/s.
When the explosive charge is detonated, the two stages separate.
The upper stage, with a mass of 1390 kg, acquires a new velocity of +5530 m/s.
To find the velocity of the lower stage, we can use the principle of conservation of momentum.
The total momentum before the explosion is equal to the total momentum after the explosion.
The momentum of the upper stage after the explosion is given by the product of its mass and velocity: (1390 kg) * (+5530 m/s) = +7,685,700 kg·m/s.
Since the explosion only affects the separation between the two stages and not their masses, the total momentum before the explosion is the same as the momentum of the entire rocket: (1390 kg + 2370 kg) * (+4010 m/s) = +15,080,600 kg·m/s.
To find the momentum of the lower stage, we subtract the momentum of the upper stage from the total momentum of the rocket after the explosion: +15,080,600 kg·m/s - +7,685,700 kg·m/s = +7,394,900 kg·m/s.
Finally, we divide the momentum of the lower stage by its mass to find its velocity: (7,394,900 kg·m/s) / (2370 kg) = -3190 m/s.
Therefore, the velocity of the 2370-kg lower stage immediately after the explosion is -3190 m/s in the opposite direction.
To learn more about velocity click here:
brainly.com/question/30559316
#SPJ11
Lifting an elephant with a forklift is an energy intensive task requiring 200,000 J of energy. The average forklift has a power output of 10 kW (1 kW is equal to 1000 W)
and can accomplish the task in 20 seconds. How powerful would the forklift need to be
to do the same task in 5 seconds?
Lifting an elephant with a forklift is an energy intensive task requiring 200,000 J of energy. The average forklift has a power output of 10 kW (1 kW is equal to 1000 W) and can accomplish the task in 20 seconds. The forklift would need to have a power output of 40,000 W or 40 kW to lift the elephant in 5 seconds.
To determine the power required for the forklift to complete the task in 5 seconds, we can use the equation:
Power = Energy / Time
Given that the energy required to lift the elephant is 200,000 J and the time taken to complete the task is 20 seconds, we can calculate the power output of the average forklift as follows:
Power = 200,000 J / 20 s = 10,000 W
Now, let's calculate the power required to complete the task in 5 seconds:
Power = Energy / Time = 200,000 J / 5 s = 40,000 W
Therefore, the forklift would need to have a power output of 40,000 W or 40 kW to lift the elephant in 5 seconds.
For more such questions on power, click on:
https://brainly.com/question/2248465
#SPJ8
(a) A defibrillator connected to a patient passes 15.0 A of
current through the torso for 0.0700 s. How much charge moves? C
(b) How many electrons pass through the wires connected to the
patient? ele
1.05 Coulombs of charge moves through the torso and approximately 6.54 × 10^18 electrons pass through the wires connected to the patient.
(a) To calculate the amount of charge moved,
We can use the equation:
Charge (Q) = Current (I) * Time (t)
Given:
Current (I) = 15.0 A
Time (t) = 0.0700 s
Substituting the values into the equation:
Q = 15.0 A * 0.0700 s
Q = 1.05 C
Therefore, 1.05 Coulombs of charge moves.
(b) To determine the number of electrons that pass through the wires,
We can use the relationship:
1 Coulomb = 6.242 × 10^18 electrons
Given:
Charge (Q) = 1.05 C
Substituting the value into the equation:
Number of electrons = 1.05 C * 6.242 × 10^18 electrons/Coulomb
Number of electrons ≈ 6.54 × 10^18 electrons
Therefore, approximately 6.54 × 10^18 electrons pass through the wires connected to the patient.
Learn more about Coulomb's law from the given link :
https://brainly.com/question/506926
#SPJ11
Required information A scuba diver is in fresh water has an air tank with a volume of 0.0100 m3. The air in the tank is initially at a pressure of 100 * 107 Pa. Assume that the diver breathes 0.500 l/s of air. Density of fresh water is 100 102 kg/m3 How long will the tank last at depths of 5.70 m² min
In order to calculate the time the tank will last, we need to consider the consumption rate of the diver and the change in pressure with depth.
As the diver descends to greater depths, the pressure on the tank increases, leading to a faster rate of air consumption. The pressure increases by 1 atm (approximately 1 * 10^5 Pa) for every 10 meters of depth. Therefore, the change in pressure due to the depth of 5.70 m²/min can be calculated as (5.70 m²/min) * (1 atm/10 m) * (1 * 10^5 Pa/atm).
To find the time the tank will last, we can divide the initial volume of the tank by the rate of air consumption, taking into account the change in pressure. However, we need to convert the rate of air consumption to cubic meters per second to match the units of the tank volume. Since 1 L is equal to 0.001 m³, the rate of air consumption becomes 0.500 * 10^-3 m³/s.
Finally, we can calculate the time the tank will last by dividing the initial volume of the tank by the adjusted rate of air consumption. The formula is: time = (0.0100 m³) / ((0.500 * 10^-3) m³/s + change in pressure). By plugging in the values for the initial pressure and the change in pressure, we can calculate the time in seconds or convert it to minutes by dividing by 60.
In the scuba diver's air tank with a volume of 0.0100 m³ and an initial pressure of 100 * 10^7 Pa will last a certain amount of time at depths of 5.70 m²/min. By considering the rate of air consumption and the change in pressure with depth, we can calculate the time it will last. The time can be found by dividing the initial tank volume by the adjusted rate of air consumption, taking into account the change in pressure due to the depth.
learn more about scuba diver here:
brainly.com/question/20530297
#SPJ11
Question 38 1 pts What caused Earth's lithosphere to fracture into plates? volcanism, which produced heavy volcanoes that bent and cracked the lithosphere tidal forces from the Moon and Sun internal temperature changes that caused the crust to expand and stretch impacts of asteroids and planetesimals convection of the underlying mantle
The lithosphere of the Earth fractured into plates as a result of the convection of the underlying mantle. The mantle convection is what is driving the movement of the lithospheric plates
The rigid outer shell of the Earth, composed of the crust and the uppermost part of the mantle, is known as the lithosphere. It is split into large, moving plates that ride atop the planet's more fluid upper mantle, the asthenosphere. The lithosphere fractured into plates as a result of the convection of the underlying mantle. As the mantle heats up and cools down, convection currents occur. Hot material is less dense and rises to the surface, while colder material sinks toward the core.
This convection of the mantle material causes the overlying lithospheric plates to move and break up over time.
Learn more about lithosphere visit:
brainly.com/question/454260
#SPJ11
1. Which of the following are conditions for simple harmonic
motion? I. The frequency must be constant. II. The restoring force
is in the opposite direction to the displacement. III. There must
be an
The conditions for simple harmonic motion are:
I. The frequency must be constant.
II. The restoring force is in the opposite direction to the displacement.
Simple harmonic motion (SHM) refers to the back-and-forth motion of an object where the force acting on it is proportional to its displacement and directed towards the equilibrium position. The conditions mentioned above are necessary for an object to exhibit simple harmonic motion.
I. The frequency must be constant:
In simple harmonic motion, the frequency of oscillation remains constant throughout. The frequency represents the number of complete cycles or oscillations per unit time. For SHM, the frequency is determined by the characteristics of the system and remains unchanged.
II. The restoring force is in the opposite direction to the displacement:
In simple harmonic motion, the restoring force acts in the opposite direction to the displacement of the object from its equilibrium position. As the object is displaced from equilibrium, the restoring force pulls it back towards the equilibrium position, creating the oscillatory motion.
III. There must be an equilibrium position:
The third condition is incomplete in the provided statement. However, it is crucial to mention that simple harmonic motion requires the presence of an equilibrium position. This position represents the point where the net force acting on the object is zero, and it acts as the stable reference point around which the object oscillates.
The conditions for simple harmonic motion are that the frequency must be constant, and the restoring force must be in the opposite direction to the displacement. Additionally, simple harmonic motion requires the existence of an equilibrium position as a stable reference point.
To know more about harmonic motion ,visit:
https://brainly.com/question/26114128
#SPJ11
An electron has a total energy of 2.38 times its rest energy. What is the momentum of this electron? (in) Question 5 A proton has a speed of 48 km. What is the wavelength of this proton (in units of pm)? 8
(a) The momentum of the electron is 2.16 times its rest momentum.(b) The wavelength of the proton is 8246 picometers.
(a) The momentum of an electron with a total energy of 2.38 times its rest energy:
E² = (pc)² + (mc²)²
Given that the total energy is 2.38 times the rest energy, we have:
E = 2.38mc²
(2.38mc²)² = (pc)² + (mc²)²
5.6644m²c⁴ = p²c² + m²⁴
4.6644m²c⁴ = p²c²
4.6644m²c² = p²
Taking the square root of both sides:
pc = √(4.6644m²c²)
p = √(4.6644m²c²) / c
p = √4.6644m²
p = 2.16m
The momentum of the electron is 2.16 times its rest momentum.
(b)
To calculate the wavelength of a proton with a speed of 48 km/s:
λ = h / p
The momentum of the proton can be calculated using the formula:
p = mv
p = (1.6726219 × 10⁻²⁷) × (48,000)
p = 8.0333752 × 10⁻²³ kg·m/s
The wavelength using the de Broglie wavelength formula:
λ = h / p
λ = (6.62607015 × 10⁻³⁴) / (8.0333752 × 10⁻²³ )
λ ≈ 8.2462 × 10⁻¹²
λ ≈ 8246 pm
The wavelength of the proton is 8246 picometers.
To know more about the wavelength:
https://brainly.com/question/32900586
#SPJ4
A skydiver will reach a terminal velocity when the air drag equals their weight. For a skydiver with a mass of 95.0 kg and a surface area of 1.5 m 2
, what would their terminal velocity be? Take the drag force to be F D
=1/2rhoAv 2
and setting this equal to the person's weight, find the terminal speed.
The terminal velocity of the skydiver is approximately 35.77 m/s. This means that the skydiver reaches this speed, the drag force exerted by the air will equal the person's weight, and they will no longer accelerate.
The terminal velocity of a skydiver with a mass of 95.0 kg and a surface area of 1.5 m^2 can be determined by setting the drag force equal to the person's weight. The drag force equation used is F_D = (1/2) * ρ * A * v^2, where ρ represents air density, A is the surface area, and v is the velocity. By equating the drag force to the weight, we can solve for the terminal velocity.
To find the terminal velocity, we need to set the drag force equal to the weight of the skydiver. The drag force equation is given as F_D = (1/2) * ρ * A * v^2, where ρ is the air density, A is the surface area, and v is the velocity. Since we want the drag force to equal the weight, we can write this as F_D = m * g, where m is the mass of the skydiver and g is the acceleration due to gravity.
By equating the drag force and the weight, we have:
(1/2) * ρ * A * v^2 = m * gWe can rearrange this equation to solve for the terminal velocity v:
v^2 = (2 * m * g) / (ρ * A)
m = 95.0 kg (mass of the skydiver)
A = 1.5 m^2 (surface area)
g = 9.8 m/s^2 (acceleration due to gravity)The air density ρ is not given, but it can be estimated to be around 1.2 kg/m^3.Substituting the values into the equation, we have:
v^2 = (2 * 95.0 kg * 9.8 m/s^2) / (1.2 kg/m^3 * 1.5 m^2)
v^2 = 1276.67Taking the square root of both sides, we get:
v ≈ 35.77 m/s Therefore, the terminal velocity of the skydiver is approximately 35.77 m/s. This means that the skydiver reaches this speed, the drag force exerted by the air will equal the person's weight, and they will no longer accelerate.
Learn more about drag force Click here:
brainly.com/question/13258892
#SPJ11
What is the best possible coefficient of performance COPret for a refrigerator that cools an environment at -13.0°C and exhausts heat to another environment at 39.0°C? COPrel= How much work W would this ideal refrigerator do to transfer 3.125 x 10 J of heat from the cold environment? W = What would be the cost of doing this work if it costs 10.5¢ per 3.60 × 106 J (a kilowatt-hour)? cost of heat transfer: How many joules of heat Qu would be transferred into the warm environment?
The best possible coefficient of performance (COPret) for the given temperatures is approximately 5.0. The work done by the refrigerator is calculated to be 6.25 x 10 J. The cost of performing this work is approximately 0.0182¢. Finally, the amount of heat transferred into the warm environment is determined to be 9.375 x 10.
The coefficient of performance (COP) of a refrigerator is a measure of its efficiency and is defined as the ratio of the amount of heat transferred from the cold environment to the work done by the refrigerator. For an ideal refrigerator, the COP can be determined using the formula:
COPret = Qc / W
where Qc is the amount of heat transferred from the cold environment and W is the work done by the refrigerator.
To find the best possible COPret for the given temperatures, we need to use the Carnot refrigerator model, which assumes that the refrigerator operates in a reversible cycle. The Carnot COP (COPrel) can be calculated using the formula:
COPrel = Th / (Th - Tc)
where Th is the absolute temperature of the hot environment and Tc is the absolute temperature of the cold environment.
Converting the given temperatures to Kelvin, we have:
Th = 39.0°C + 273.15 = 312.15 K
Tc = -13.0°C + 273.15 = 260.15 K
Substituting these values into the equation, we can calculate the COPrel:
COPrel = 312.15 K / (312.15 K - 260.15 K) ≈ 5.0
Now, we can use the COPrel value to determine the work done by the refrigerator. Rearranging the COPret formula, we have:
W = Qc / COPret
Given that Qc = 3.125 x 10 J, we can calculate the work done:
W = (3.125 x 10 J) / 5.0 = 6.25 x 10 J
Next, we can calculate the cost of doing this work, considering the given cost of 10.5¢ per 3.60 × 10^6 J (a kilowatt-hour). First, we convert the work from joules to kilowatt-hours:
W_kWh = (6.25 x 10 J) / (3.60 × 10^6 J/kWh) ≈ 0.0017361 kWh
To calculate the cost, we use the conversion rate:
Cost = (0.0017361 kWh) × (10.5¢ / 1 kWh) ≈ 0.01823¢ ≈ 0.0182¢
Finally, we need to determine the amount of heat transferred into the warm environment (Qw). For an ideal refrigerator, the total heat transferred is the sum of the heat transferred to the cold environment and the work done:
Qw = Qc + W = (3.125 x 10 J) + (6.25 x 10 J) = 9.375 x 10 J
In summary, the best possible coefficient of performance (COPret) for the given temperatures is approximately 5.0. The work done by the refrigerator is calculated to be 6.25 x 10 J. The cost of performing this work is approximately 0.0182¢. Finally, the amount of heat transferred into the warm environment is determined to be 9.375 x 10.
Learn more about coefficient here,
https://brainly.com/question/1038771
#SPJ11
The owner of a large dairy farm with 10,000 cattle proposes to produce biogas from the manure. The proximate analysis of a sample of manure collected at this facility was as follows: Volatile solids (VS) content = 75% of dry matter. Laboratory tests indicated that the biochemical methane potential of a manure sample was 0.25 m³ at STP/ kg VS. a) Estimate the daily methane production rate (m³ at STP/day). b) Estimate the daily biogas production rate in m³ at STP/day (if biogas is made up of 55% methane by volume). c) If the biogas is used to generate electricity at a heat rate of 10,500 BTU/kWh, how many units of electricity (in kWh) can be produced annually? d) It is proposed to use the waste heat from the electrical power generation unit for heating barns and milk parlors, and for hot water. This will displace propane (C3H8) gas which is currently used for these purposes. If 80% of waste heat can be recovered, how many pounds of propane gas will the farm displace annually? Note that (c) and (d) together become a CHP unit. e) If the biogas is upgraded to RNG for transportation fuel, how many GGEs would be produced annually? f) If electricity costs 10 cents/kWh, propane gas costs 55 cents/lb and gasoline $2.50 per gallon, calculate farm revenues and/or avoided costs for each of the following biogas utilization options (i) CHP which is parts (c) and (d), (ii) RNG which is part (e).
(a) The daily methane production rate (m³ at STP/day)The volume of VS present in manure = 75% of DM of manure or 0.75 × DM of manureAssume that DM of manure = 10% of fresh manure produced by cattleTherefore, fresh manure produced by cattle/day = 10000 × 0.1 = 1000 tonnes/dayVS in 1 tonne of fresh manure = 0.75 × 0.1 = 0.075 tonneVS in 1000 tonnes of fresh manure/day = 1000 × 0.075 = 75 tonnes/dayMethane produced from 1 tonne of VS = 0.25 m³ at STPTherefore, methane produced from 1 tonne of VS in a day = 0.25 × 1000 = 250 m³ at STP/dayMethane produced from 75 tonnes of VS in a day = 75 × 250 = 18,750 m³ at STP/day
(b) The daily biogas production rate in m³ at STP/day (if biogas is made up of 55% methane by volume).Biogas produced from 75 tonnes of VS/day will contain:
Methane = 55% of 18750 m³ at STP = 55/100 × 18750 = 10,312.5 m³ at STPOther gases = 45% of 18750 m³ at STP = 45/100 × 18750 = 8437.5 m³ at STPTherefore, the total volume of biogas produced in a day = 10,312.5 + 8437.5 = 18,750 m³ at STP/day(c) If the biogas is used to generate electricity at a heat rate of 10,500 BTU/kWh, how many units of electricity (in kWh) can be produced annually?One kWh = 3,412 BTU of heat10,312.5 m³ at STP of methane produced from the biogas = 10,312.5/0.7179 = 14,362 kg of methaneThe energy content of methane = 55.5 MJ/kgEnergy produced from the biogas/day = 14,362 kg × 55.5 MJ/kg = 798,021 MJ/dayHeat content of biogas/day = 798,021 MJ/dayHeat rate of electricity generation = 10,500 BTU/kWhElectricity produced/day = 798,021 MJ/day / (10,500 BTU/kWh × 3,412 BTU/kWh) = 22,436 kWh/dayTherefore, the annual electricity produced = 22,436 kWh/day × 365 days/year = 8,189,540 kWh/year
(d) It is proposed to use the waste heat from the electrical power generation unit for heating barns and milk parlors, and for hot water. This will displace propane (C3H8) gas which is currently used for these purposes. If 80% of waste heat can be recovered, how many pounds of propane gas will the farm displace annually?Propane energy content = 46.3 MJ/kgEnergy saved by using waste heat = 798,021 MJ/day × 0.8 = 638,417 MJ/dayTherefore, propane required/day = 638,417 MJ/day ÷ 46.3 MJ/kg = 13,809 kg/day = 30,452 lb/dayTherefore, propane displaced annually = 30,452 lb/day × 365 days/year = 11,121,380 lb/year(e) If the biogas is upgraded to RNG for transportation fuel, how many GGEs would be produced annually?Energy required to produce 1 GGE of CNG = 128.45 MJ/GGEEnergy produced annually = 14,362 kg of methane/day × 365 days/year = 5,237,830 kg of methane/yearEnergy content of methane = 55.5 MJ/kgEnergy content of 5,237,830 kg of methane = 55.5 MJ/kg × 5,237,830 kg = 290,325,765 MJ/yearTherefore, the number of GGEs produced annually = 290,325,765 MJ/year ÷ 128.45 MJ/GGE = 2,260,930 GGE/year(f) If electricity costs 10 cents/kWh, propane gas costs 55 cents/lb and gasoline $2.50 per gallon, calculate farm revenues and/or avoided costs for each of the following biogas utilization options (i) CHP which is parts (c) and (d), (ii) RNG which is part (e).CHP(i) Electricity sold annually = 8,189,540 kWh/year(ii) Propane displaced annually = 11,121,380 lb/yearRevenue from electricity = 8,189,540 kWh/year × $0.10/kWh = $818,954/yearSaved cost for propane = 11,121,380 lb/year × $0.55/lb = $6,116,259/yearTotal revenue and/or avoided cost = $818,954/year + $6,116,259/year = $6,935,213/yearRNG(i) Number of GGEs produced annually = 2,260,930 GGE/yearRevenue from RNG = 2,260,930 GGE/year × $2.50/GGE = $5,652,325/yearTherefore, farm reve
About BiogasBiogas is a gas produced by anaerobic activity which degrades organic materials. Examples of these organic materials are manure, domestic sewage, or any organic waste that can be decomposed by living things under anaerobic conditions. The main ingredients in biogas are methane and carbon dioxide.
Learn More About Biogas at https://brainly.com/question/32179195
#SPJ11
If you double an object's velocity, its kinetic energy increases by a factor of four. True False
True. Doubling an object's velocity increases its kinetic energy by a factor of four.
The relationship between kinetic energy (KE) and velocity (v) is given by the equation [tex]KE=\frac{1}{2}*m * V^{2}[/tex]
where m is the mass of the object. According to this equation, kinetic energy is directly proportional to the square of the velocity. If we consider an initial velocity [tex]V_1[/tex], the initial kinetic energy would be:
[tex]KE_1=\frac{1}{2} * m * V_1^{2}[/tex].
Now, if we double the velocity to [tex]2V_1[/tex], the new kinetic energy would be [tex]KE_2=\frac{1}{2} * m * (2V_1)^2 = \frac{1}{2} * m * 4V_1^2[/tex].
Comparing the initial and new kinetic energies, we can see that [tex]KE_2[/tex] is four times larger than [tex]KE_1[/tex]. Therefore, doubling the velocity results in a fourfold increase in kinetic energy.
Learn more about velocity here:
https://brainly.com/question/18084516
#SPJ11
Write a question appropriate for this exam about how much more heat radiates away from a metal teapot that contains boiling water compared to one that contains water at X degrees Celsius. Then answer the question
The teapot containing boiling water will radiate significantly more heat than the teapot with water at X degrees Celsius due to the higher temperature.
Question:
A metal teapot contains boiling water, while another identical teapot contains water at X degrees Celsius. How much more heat radiates away from the teapot with boiling water compared to the one with water at X degrees Celsius?
Answer:
The amount of heat radiated by an object is directly proportional to the fourth power of its absolute temperature. Since boiling water is at a higher temperature than water at X degrees Celsius, the teapot containing boiling water will radiate significantly more heat compared to the teapot with water at X degrees Celsius.
Learn more about temperature:
https://brainly.com/question/27944554
#SPJ4
"A 4-cm high object is in front of a thin lens. The lens forms a
virtual image 12 cm high. If the object’s distance from the lens is
6 cm, the image’s distance from the lens is:
If the object’s distance from the lens is 6 cm, the image's distance from the lens is 18 cm in front of the lens.
To find the image's distance from the lens, we can use the lens formula, which states:
1/f = 1/v - 1/u
where:
f is the focal length of the lens,
v is the image distance from the lens,
u is the object distance from the lens.
Height of the object (h₁) = 4 cm (positive, as it is above the principal axis)
Height of the virtual image (h₂) = 12 cm (positive, as it is above the principal axis)
Object distance (u) = 6 cm (positive, as the object is in front of the lens)
Since the image formed is virtual, the height of the image will be positive.
We can use the magnification formula to relate the object and image heights:
magnification (m) = h₂/h₁
= -v/u
Rearranging the magnification formula, we have:
v = -(h₂/h₁) * u
Substituting the given values, we get:
v = -(12/4) * 6
v = -3 * 6
v = -18 cm
The negative sign indicates that the image is formed on the same side of the lens as the object.
Learn more about distance -
brainly.com/question/26550516
#SPJ11
A flat piece of diamond is 10.0 mm thick. How long will it take for light to travel across the diamond?
The time it takes for light to travel across the diamond is approximately 8.07 x 10^(-11) seconds.
To calculate the time it takes for light to travel across the diamond, we can use the formula:
Time = Distance / Speed
The speed of light in a vacuum is approximately 299,792,458 meters per second (m/s). However, the speed of light in a medium, such as diamond, is slower due to the refractive index.
The refractive index of diamond is approximately 2.42.
The distance light needs to travel is the thickness of the diamond, which is 10.0 mm or 0.01 meters.
Using these values, we can calculate the time it takes for light to travel across the diamond:
Time = 0.01 meters / (299,792,458 m/s / 2.42)
Simplifying the expression:
Time = 0.01 meters / (123,933,056.2 m/s)
Time ≈ 8.07 x 10^(-11) seconds
Therefore, it will take approximately 8.07 x 10^(-11) seconds for light to travel across the diamond.
To learn more about refractive index, Visit:
https://brainly.com/question/83184
#SPJ11
: Suppose 45 cm of wire is experiencing a magnetic force of 0.55 N. 50% Part (a) What is the angle in degrees between the wire and the 1.25 T field if it is carrying a 6.5 A current?
To find the angle between the wire and the magnetic field, we can use the formula for the magnetic force on a current-carrying wire:
F = BILsinθ
Where:
F = Magnetic force
B = Magnetic field strength
I = Current
L = Length of the wire
θ = Angle between the wire and the magnetic field
We are given:
F = 0.55 N
B = 1.25 T
I = 6.5 A
L = 45 cm = 0.45 m
Let's rearrange the formula to solve for θ:
θ = sin^(-1)(F / (BIL))
Substituting the given values:
θ = sin^(-1)(0.55 N / (1.25 T * 6.5 A * 0.45 m))
Now we can calculate θ:
θ = sin^(-1)(0.55 / (1.25 * 6.5 * 0.45))
Using a calculator, we find:
θ ≈ sin^(-1)(0.0558)
θ ≈ 3.2 degrees (approximately)
Therefore, the angle between the wire and the magnetic field is approximately 3.2 degrees.
Learn more about angle on:
https://brainly.com/question/30147425
#SPJ4
The angle is approximately 6.6°.
The formula for finding the magnetic force acting on a current carrying conductor in a magnetic field is,
F = BILSinθ Where,
F is the magnetic force in Newtons,
B is the magnetic field in Tesla
I is the current in Amperes
L is the length of the conductor in meters and
θ is the angle between the direction of current flow and the magnetic field lines.
Substituting the given values, we have,
F = 0.55 NB
= 1.25 TI
= 6.5 AL
= 45/100 meters (0.45 m)
Let θ be the angle between the wire and the 1.25 T field.
The force equation becomes,
F = BILsinθ 0.55
= (1.25) (6.5) (0.45) sinθ
sinθ = 0.55 / (1.25 x 6.5 x 0.45)
= 0.11465781711
sinθ = 0.1147
θ = sin^-1(0.1147)
θ = 6.6099°
= 6.6°
Learn more about magnetic force from the given link
https://brainly.com/question/2279150
#SPJ11
Score 1 Starting from rest, a turnable rotates at angular acceleration of 0.13 rad/s2. How long does it take for it speed to get to 6 rad/s? 3A 1110 kg car traveling clockwise at a constant speed along a flat horizontal circular track of radius 26 m. The car takes 21 s to complete one lap around the track. What is the magnitude of the force of friction exerted on the car by the track? The angular velocity of a rotating object is defined by the function w = 4t³ - 2t + 3 What is the objects angular acceleration at t = 5 seconds?
The angular acceleration at t = 5 seconds is 298 rad/s².
Angular acceleration, α = 0.13 rad/s²
Initial angular velocity,
ω₁ = 0Final angular velocity,
ω₂ = 6
We have to find the time it takes to reach this final velocity. We know that
Acceleration, a = αTime, t = ?
Initial velocity, u = ω₁Final velocity, v = ω₂Using the formula v = u + at
The final velocity of an object, v = u + at is given, where v is the final velocity of the object, u is the initial velocity of the object, a is the acceleration of the object, and t is the time taken for the object to change its velocity from u to v.
Substituting the given values we get,
6 = 0 + (0.13)t6/0.13 = t461.5 seconds ≈ 62 seconds
Therefore, the time taken to get to 6 rad/s is 62 seconds.3) The given parameters are given below:
Mass of the car, m = 1110 kg
Radius of the track, r = 26 m
Time taken to complete one lap around the track, t = 21 sWe have to find the magnitude of the force of friction exerted on the car by the track.
We know that:
Centripetal force, F = (mv²)/r
The force that acts towards the center of the circle is known as centripetal force.
Substituting the given values we get,
F = (1110 × 6.12²)/26F
= 16548.9 N
≈ 16550 N
To find the force of friction, we have to find the force acting in the opposite direction to the centripetal force.
Therefore, the magnitude of the force of friction exerted on the car by the track is 16550 N.2) The given angular velocity function is, ω = 4t³ - 2t + 3We have to find the angular acceleration at t = 5 seconds.We know that the derivative of velocity with respect to time is acceleration.
Therefore, Angular velocity, ω = 4t³ - 2t + 3 Angular acceleration, α = dω/dt Differentiating the given function w.r.t. t we get,α = dω/dt = d/dt (4t³ - 2t + 3)α = 12t² - 2At t = 5,α = 12(5²) - 2 = 298 rad/s².
To know m ore about angular acceleration visit:-
https://brainly.com/question/1980605
#SPJ11
1. The electric field in a region of space increases from 00 to 1700 N/C in 2.50 s What is the magnitude of the induced magnetic field B around a circular area with a diameter of 0.540 m oriented perpendicularly to the electric field?
b=____T
2.
Having become stranded in a remote wilderness area, you must live off the land while you wait for rescue. One morning, you attempt to spear a fish for breakfast.
You spot a fish in a shallow river. Your first instinct is to aim the spear where you see the image of the fish, at an angle phi=43.40∘ϕ=43.40∘ with respect to the vertical, as shown in the figure. However, you know from physics class that you should not throw the spear at the image of the fish, because the actual location of the fish is farther down than it appears, at a depth of H=0.9500 m.H=0.9500 m. This means you must decrease the angle at which you throw the spear. This slight decrease in the angle is represented as α in the figure.
If you throw the spear from a height ℎ=1.150 mh=1.150 m above the water, calculate the angle decrease α . Assume that the index of refraction is 1.0001.000 for air and 1.3301.330 for water.
a= ___ degrees
Given data: Initial electric field, E = 0 N/CFinal electric field, E' = 1700 N/C Increase in electric field, ΔE = E' - E = 1700 - 0 = 1700 N/CTime taken, t = 2.50 s.
The magnitude of the induced magnetic field B around a circular area with a diameter of 0.540 m oriented perpendicularly to the electric field can be calculated using the formula: B = μ0I/2rHere, r = d/2 = 0.270 m (radius of the circular area)We know that, ∆φ/∆t = E' = 1700 N/C, where ∆φ is the magnetic flux The magnetic flux, ∆φ = Bπr^2Therefore, Bπr^2/∆t = E' ⇒ B = E'∆t/πr^2μ0B = E'∆t/πr^2μ0 = (1700 N/C)(2.50 s)/(π(0.270 m)^2)(4π×10^-7 T· m/A)≈ 4.28×10^-5 T Therefore, b = 4.28 x 10^-5 T2.
In the given problem, the angle of incidence is φ = 43.40°, depth of the fish is H = 0.9500 m, and height of the thrower is h = 1.150 m. The angle decrease α needs to be calculated. Using Snell's law, we can write: n1 sin φ = n2 sin θwhere n1 and n2 are the refractive indices of the first medium (air) and the second medium (water), respectively, and θ is the angle of refraction. Using the given data, we get:sin θ = (n1 / n2) sin φ = (1.000 / 1.330) sin 43.40° ≈ 0.5234θ ≈ 31.05°From the figure, we can write:tan α = H / (h - H) = 0.9500 m / (1.150 m - 0.9500 m) = 1.9α ≈ 63.43°Therefore, the angle decrease α is approximately 63.43°.So, a = 63.43 degrees.
To know more about electric visit:
https://brainly.com/question/31173598
#SPJ11
Describe how the ocean floor records Earth's magnetic field."
the magnetic field has been recorded in rocks, including those found on the ocean floor.
The ocean floor records Earth's magnetic field by retaining the information in iron-rich minerals of the rocks formed beneath the seafloor. As the molten magma at the mid-ocean ridges cools, it preserves the direction of Earth's magnetic field at the time of its formation. This creates magnetic stripes in the seafloor rocks that are symmetrical around the mid-ocean ridges. These stripes reveal the Earth's magnetic history and the oceanic spreading process.
How is the ocean floor a recorder of the earth's magnetic field?
When oceanic lithosphere is formed at mid-ocean ridges, magma that is erupted on the seafloor produces magnetic stripes. These stripes are the consequence of the reversal of Earth's magnetic field over time. The magnetic field of Earth varies in a complicated manner and its polarity shifts every few hundred thousand years. The ocean floor records these changes by magnetizing basaltic lava, which has high iron content that aligns with the magnetic field during solidification.
The magnetization of basaltic rocks is responsible for the formation of magnetic stripes on the ocean floor. Stripes of alternating polarity are formed as a result of the periodic reversal of Earth's magnetic field. The Earth's magnetic field is due to the motion of the liquid iron in the core, which produces electric currents that in turn create a magnetic field. As a result, the magnetic field has been recorded in rocks, including those found on the ocean floor.
Learn more about ocean and magnetic field https://brainly.com/question/14411049
#SPJ11
Plotting the stopping potential i.e. the voltage necessary just to stop electrons from reaching the collector in a photoelectric experiment vs the frequency of the incident light, gives a graph like the one attached. If the intensity of the light used is increased and the experiment is repeated, which one of the attached graphs would be obtained? ( The original graph is shown as a dashed line). Attachments AP 2.pdf A. Graph ( a ). B. Graph (b). c. Graph (c). D. Graph (d).
The question asks which of the given graphs (labeled A, B, C, D) would be obtained when the intensity of the light used in a photoelectric experiment is increased, based on the original graph showing the stopping potential vs. frequency of the incident light.
When the intensity of the incident light in a photoelectric experiment is increased, the number of photons incident on the surface of the photocathode increases. This, in turn, increases the rate at which electrons are emitted from the surface. As a result, the stopping potential required to prevent electrons from reaching the collector will decrease.
Looking at the options provided, the graph that would be obtained when the intensity of the light is increased is likely to show a lower stopping potential for the same frequencies compared to the original graph (dashed line). Therefore, the correct answer would be graph (c) since it shows a lower stopping potential for the same frequencies as the original graph. Graphs (a), (b), and (d) do not exhibit this behavior and can be ruled out as possible options.
Learn more about Graph:
https://brainly.com/question/17267403
#SPJ11
1. An 8-m-long double pipe heat exchanger is constructed of 4 -std. type M and 3 std type M copper tubing. It is used to cool unused engine oil. The exchanger takes water into the annulus at 10 ∘ C at a rate of 2.Ykg/s, which exits at 10.7 ∘ C, and oil into the pipe at 140 ∘ C at a rate of 0.2 kg/s. Determine the expected outlet temperature of the oil. Assume counter flow.
The expected outlet temperature of oil is 48.24°C.
Given Data:
Length of heat exchanger, L = 8 m
Mass flow rate of water, mw = 2.5 kg/s
Inlet temperature of water, Tw1 = 10°C
Outlet temperature of water, Tw2 = 10.7°C
Mass flow rate of oil, mo = 0.2 kg/s
Inlet temperature of oil, To1 = 140°C (T1)
Type of copper tube, Std. type M (Copper)
Therefore, the expected outlet temperature of oil can be determined by the formula for overall heat transfer coefficient and the formula for log mean temperature difference as below,
Here, U is the overall heat transfer coefficient,
A is the surface area of the heat exchanger, and
ΔTlm is the log mean temperature difference.
On solving the above equation we can determine ΔTlm.
Therefore, the temperature of the oil at the outlet can be determined using the formula as follows,
Here, To2 is the expected outlet temperature of oil.
Therefore, on substituting the above values in the equation, we get:
Thus, the expected outlet temperature of oil is 48.24°C.
Learn more about temperature, here
https://brainly.com/question/1461624
#SPJ11
State and derive all the components of field tensor in Electrodynamics with 16 components for each component and derive Biot-Savart law by only considering electrostatics and Relativity as fundamental effects?
This is the vector potential equation in electrostatics. Solving this equation yields the vector potential A, which can then be used to calculate the magnetic field B using the Biot-Savart law: B = ∇ × A
In electrodynamics, the field tensor, also known as the electromagnetic tensor or the Faraday tensor, is a mathematical construct that combines the electric and magnetic fields into a single entity. The field tensor is a 4x4 matrix with 16 components.
The components of the field tensor are typically denoted by Fᵘᵛ, where ᵘ and ᵛ represent the indices ranging from 0 to 3. The indices 0 to 3 correspond to the components of spacetime: 0 for the time component and 1, 2, 3 for the spatial components.
The field tensor components are derived from the electric and magnetic fields as follows:
Fᵘᵛ = ∂ᵘAᵛ - ∂ᵛAᵘ
where Aᵘ is the electromagnetic 4-potential, which combines the scalar potential (φ) and the vector potential (A) as Aᵘ = (φ/c, A).
Deriving the Biot-Savart law by considering only electrostatics and relativity as fundamental effects:
The Biot-Savart law describes the magnetic field produced by a steady current in the absence of time-varying electric fields. It can be derived by considering electrostatics and relativity as fundamental effects.
In electrostatics, we have the equation ∇²φ = -ρ/ε₀, where φ is the electric potential, ρ is the charge density, and ε₀ is the permittivity of free space.
Relativistically, we know that the electric field (E) and the magnetic field (B) are part of the electromagnetic field tensor (Fᵘᵛ). In the absence of time-varying electric fields, we can ignore the time component (F⁰ᵢ = 0) and only consider the spatial components (Fⁱʲ).
Using the field tensor components, we can write the equations:
∂²φ/∂xⁱ∂xⁱ = -ρ/ε₀
Fⁱʲ = ∂ⁱAʲ - ∂ʲAⁱ
By considering the electrostatic potential as A⁰ = φ/c and setting the time component F⁰ᵢ to 0, we have:
F⁰ʲ = ∂⁰Aʲ - ∂ʲA⁰ = 0
Using the Lorentz gauge condition (∂ᵤAᵘ = 0), we can simplify the equation to:
∂ⁱAʲ - ∂ʲAⁱ = 0
From this equation, we find that the spatial components of the electromagnetic 4-potential are related to the vector potential A by:
Aʲ = ∂ʲΦ
Substituting this expression into the original equation, we have:
∂ⁱ(∂ʲΦ) - ∂ʲ(∂ⁱΦ) = 0
This equation simplifies to:
∂ⁱ∂ʲΦ - ∂ʲ∂ⁱΦ = 0
Taking the curl of both sides of this equation, we obtain:
∇ × (∇ × A) = 0
Applying the vector identity ∇ × (∇ × A) = ∇(∇ ⋅ A) - ∇²A, we have:
∇²A - ∇(∇ ⋅ A) = 0
Since the divergence of A is zero (∇ ⋅ A = 0) for electrostatics, the equation
reduces to:
∇²A = 0
This is the vector potential equation in electrostatics. Solving this equation yields the vector potential A, which can then be used to calculate the magnetic field B using the Biot-Savart law:
B = ∇ × A
Therefore, by considering electrostatics and relativity as fundamental effects, we can derive the Biot-Savart law for the magnetic field produced by steady currents.
To know more about electrostatics refer here:
https://brainly.com/question/16489391#
#SPJ11