Answer:
Carbonyl Groups
Explanation:
Electron-withdrawing substituents stabilize the carbon atoms in its surrounding. These chemical groups are Carbonyl groups which withdraw electrons because of the inductive effect and presence of double bond between C and O and also because of the polarity of the two atoms (Carbon and oxygen)
What compound(s) does pure water contain?
Draw the major organic product in the reaction scheme. Be sure to clearly show stereochemistry (if applicable). The starting material is an alkyne where carbon 1 is bonded to cyclopentane and carbon 2 is bonded to H. Step 1 is N a N H 2. Step 2 is C H 3 I. Step 3 is sodium in liquid ammonia. Draw the major organic product.
Answer:
See answer below
Explanation:
The picture below will show you the final product and mechanism.
In the first step, the NaNH₂ is a strong base, so, this base will substract the hydrogen from carbon 2, to generate a negative charge there, and then, carbon 2 becomes a nucleophyle.
As a nucleophyle it will attack to the CH₃I in the next step, and it will attach to the CH₃.
The second step is just a regular step to reduce the triple bond of the alkyne to alkane or alkene, this will depend on the quantity of the reactant. In this case, an alkene.
Hope this helps,,,,,,k
How many moles are in 3.72 x 10^27 atoms of iron?
Answer: There are [tex]0.617 \times 10^{4}[/tex] moles present in [tex]3.72 \times 10^{27}[/tex] atoms of iron.
Explanation:
According to the mole concept, there are [tex]6.022 \times 10^{23}[/tex] atoms present in one mole of a substance.
Hence, moles present in [tex]3.72 \times 10^{27}[/tex] atoms are calculated as follows.
[tex]Moles = \frac{3.72 \times 10^{27}}{6.022 \times 10^{23}}\\= 0.617 \times 10^{4} mol[/tex]
Thus, we can conclude that there are [tex]0.617 \times 10^{4}[/tex] moles present in [tex]3.72 \times 10^{27}[/tex] atoms of iron.
HCN
H:C:N:
3.
Is this Lewis Structure correct?
Answer:
No, your missing some bonds
I need guidance on this question
Answer:
(C) NO2 has covalent bonds.
Give the ratio that balances out the following equation: ___Cr + ___Pb(NO3)4 ---> ___ Cr(NO3)3 + ____ Pb
Answer: Ratio : 4, 3, 4, 3 are the answers.
Explanation:
Octane (C8H18) is found in gasoline. It is burned for fuel in a combustion
reaction. The unbalanced combustion reaction for octane is shown below.
C8h18+ O2 → C02 + H2O + heat
When the reaction is balanced, how many carbon dioxide molecules are
produced for every octane molecule burned?
Answer:
Explanation:
It's 8
Do u believe that you are beautiful/handsome?
Yes or No?
in writing a chemical equation that produces hydrogen gas, the correct representation of hydrogen gas is
a.H
b.2H
c.H2
d.OH
Answer:
h2
Explanation:
Question 5 (5 points)
Complete the following sentences:
a)
is the least reactive alkall metal.
b)
is the most reactive alkali metal.
is the least reactive alkaline earth metal.
d)
is the most reactive alkaline earth metal.
e)
is the most reactive halogen
Blank 1:
Blank 2:
Blank 3:
Blank 4:
Blank 5:
Question 6.12
Ice melts after adding heat. The free energy is ————— !
A. Exothermic
B. Not temperature dependent
C. Temperature dependent
D. Depended on how it is heated
E. React with active metals to form h2 gas
F. Endothermic
How do the equilibrium concentrations of the reactants compare to the equilibrium concentrations of the product?
Answer: It depends equilibrium constant K
Explanation: You need to to have reaction formula.
If K >> 1 then concentrations of products are much bigger than
concentrations of reactants. If K < < 1, concentration of products is small.
1. How many grams of water are in a cup containing
0.1 moles of H2O?
Answer:
Explanation:
fdcdf
Which of the following substances can be dissolved in pure water to give a basic solution?
Hydrogen chloride
Sodium bromide
Sodium hydroxide
Sodium chloride
I think it's sodium hydroxide
Explanation:
sodium hydroxide is a base
Is This An Igneous Rock Or Metamorphic Or Sedimentary?
Answer:
Metamorphic
Explanation:
Answer: thats metamorphic rock
How much heat must be absorbed by 375 grams of water to raise its temperature by 25 degrees Celsius? Specific heat for water= 4.184 J/g/C or K
Answer:
[tex]3.9*10^4 J[/tex]
Explanation:
See image for explanation!Answer:
[tex]\boxed {\boxed {\sf 39, 225 \ Joules}}}[/tex]
Explanation:
Since we are given the mass, temperature, and specific heat, we should use the following formula to calculate heat energy.
[tex]q=mc \Delta T[/tex]
We have 375 grams of water, the specific heat of water is 4.184 J/g ° C, and the temperature is raised 25 degrees Celsisus. Therefore:
m= 375 g c= 4.184 J/g °C ΔT= 25°CSubstitute the values into the formula.
[tex]q= (375 \ g)(4.184 \ J/g \textdegree C)(25 \textdegree C)[/tex]
Multiply the first two values together. The units of grams will cancel.
[tex]q=1569 \ J/ \textdegree C(25 \textdegree C)[/tex]
Multiply again. This time, the degrees Celsius cancel, so we are left with only the units of Joules.
[tex]q= 39225 \ J[/tex]
39,255 Joules of heat must be absorbed by the water.
The exact mechanism of this reaction is a little complicated, as it involves the copper ions. However, the process involves the formation of small amounts of bromine in situ. Draw the mechanism of the bromination of 4-tert-butyl phenol with Br2. -g
Answer:
see picture below
Explanation:
The mechanism is in the following picture.
In the first step, the lone pair of oxygen (from the OH) as it's a strong activating group in the molecule, will go to the ring. This will cause that the double bond of the ring of the ortho position, attacks as nucleophyle to the Br2, causing the breaking of the bond.
In the second step, the bromine ion substract the hydrogen from the ortho position, and then, by resonance, the pair of electrons returns to the oxygen of the phenol.
A sample of aluminum requires 341 J of energy to raise the temperature from 18.0ºC to 55.0ºC. Calculate the mass of the aluminum sample.
Answer:
10.22g
Explanation:
Using the formula as follows:
Q = m × c × ∆T
Where;
Q = amount of heat required (J)
m = mass of substance (g)
c = specific heat of substance (J/g°C)
∆T = change in temperature (°C)
According to the information given in this question;
Q = 341J
m = ?
∆T = 55.0ºC - 18.0ºC = 37°C
c of aluminum = 0.902J/g°C
Using Q = m × c × ∆T
341 = m × 0.902 × 37
341 = 33.374m
m = 341 ÷ 33.374
m = 10.22g
In which phase of wound healing is fibrin most involved?
Answer:
Finally, coagulation occurs and reinforces the platelet plug with threads of fibrin which are like a molecular binding agent. The hemostasis stage of wound healing happens very quickly.
Explanation:
Hope it helps u
FOLLOW MY ACCOUNT PLS PLS
mrs tuckers class is doing an experiment they fill up a cup with ice water they measure the temperature of both the water and the classroom after one hour . what will mrs tucker observe about the temperature of ice water after one hour
A. The temperature will increase
B. The temperature Will remain the same
C. The temperature will decrease greatly
D. The temperature Will decrease slightly
Answer:
Ofc D. bc if the temp decreases, that means it is getting colder u dummy! But if it increases, it is getting warmer.
Explanation:
I got it right on USATestprep for using common sense, mark me the brainliest.
What occurs when a reaction reaches equilibrium?
1)The concentration of the reactants increases.
2)The concentration of the products increases
3)The rate of the forward reaction is equal to the rate of the reverse reaction
4)The rate of the forward reaction is slower that the rate of the reverse reaction.
Answer:
3)The rate of the forward reaction is equal to the rate of the reverse reaction
Answer:
The Rate of Forward Reaction is equal to the rate of the reverse reaction.
Explanation:
Hope this helps :)
Which of the following is true for a gas under conditions of very high pressure? (5
points)
1) PV > nRT, because the real volume of the gas would be more than the ideal
volume.
2) PV = nRT, because intermolecular forces are considerable at very high
pressures.
3) PV = nRT, because all gases behave as ideal gases at very high pressures.
04) PV = nRT, because the volume of the gas would become negligible.
Answer:
1) PV > nRT, because the real volume of the gas would be more than the ideal
volume.
Explanation:
According to the ideal gas equation; PV = nRT. Let us recall that this equation only holds under ideal conditions.
Gases exhibit ideal behavior under high temperature and low pressure. At higher pressure, the real volume of the gas is larger than the ideal volume of the gas.
Thus, at high pressure, PV > nRT, because the real volume of the gas would be more than the ideal volume.
Answer:
1) PV > nRT, because the real volume of the gas would be more than the ideal volume.
Explanation:
just took the test :)
what do adamantium,vibranium and unobtainum have in common
Answer:
they're all fake
Explanation:
1. For each of the following formulas:
1) if ionic, write the formulas of the ions; if covalent, draw the Lewis structure
2) For each covalent compound, describe the electronic and molecular geometry
3) For each covalent compound, describe the hybridization of the central atom
4) Name each compound, except the organic one.
5) How many sigma and how many pi bonds does each compound have?
MnSO4 CH3NH2 PCl5 O2 LiF
Answer:
See Explanation
Explanation:
The ionic compounds are; MnSO4 and LiF
The covalent compounds are; CH3NH2, PCl5 and O2
1) The formulas of the ions are;
MnSO4 - Mn^2+ SO4^2-
LiF - Li^+ F^-
The structure of each of the three covalent molecules is shown in the images attached to this answer.
2) CH3NH2 - Has a tetrahedral molecular geometry and electronic geometry
PCl5 - Has a trigonal bipyramidal molecular geometry and electronic geometry
O2 - Has a linear molecular geometry and electronic geometry.
3) CH3NH2 is sp3 hybridized
PCl5 is sp3d hybridized
O2 - is sp2 hybridized
4) MnSO4 - Manganese II sulphate
PCl5 - Phosphorus pentachloride
O2 - Oxygen molecule
LiF- Lithium fluoride
5) PCl5 - Five sigma bonds and no pi bond
CH3NH2 - 6 sigma bonds and no pi bond
O2 - 1 sigma bond and 1 pi bond
A community located downwind from a coal-fired power plant has seen a recent increase in the number of dead and dying trees. A so scientist measured values for the following parameters before and after the trees died off. Which of the following oil data should be used to determine if the coalfired power plant emiations were the cause of the damage to the trees
a. Moisture content and water retention
b. Parent material composition
c. Pesticide and herbicide residue levels
d. Calcium and aluminum levels
Answer:
Option D, Calcium and Aluminum levels
Explanation:
The coal fired power plant releases huge amount of particulate and gaseous emissions such as mercury, sulphur dioxide, nitrogen oxide etc. When there is rain, these gaseous and particulate matter comes to the ground along with rain water and pollute the soil. There are also chances of acid rain due to the presence of sulphur dioxide. Polluted soil and acid rain negatively impact the growth of the plants and causes leaching of Aluminium thereby decreasing the availability of calcium for the plants. Thus, the trees die. Hence, if the amount of Aluminium and Calcium in soil is determined, one can easily deduce the cause of death of trees.
Hence, option D is correct
UV light can damage biological molecules because it has sufficient energy to break bonds within molecules. A carbon-carbon single bond typically requires 348 kJ/mol of energy to break it. What is the longest wavelength of light with energy sufficient to break this bond
Answer:
5.72 × 10⁻³¹ m
Explanation:
Step 1: Given and required data
Energy to break 1 mole of C-C single bonds (E): 348 kJPlanck's constant (h): 6.63 × 10⁻³⁴ J.sSpeed of light (c): 3.00 × 10⁸ m/sStep 2: Calculate the longest wavelength of light (λ) with energy sufficient to break this bond
We will use the Planck-Einstein relation.
E = h × c/λ
λ = h × c/E
λ = (6.63 × 10⁻³⁴ J.s) × (3.00 × 10⁸ m/s)/(348 × 10³ J) = 5.72 × 10⁻³¹ m
At a certain temperature the vapor pressure of pure benzene is measured to be . Suppose a solution is prepared by mixing of benzene and of heptane . Calculate the partial pressure of benzene vapor above this solution. Round your answer to significant digits.
Answer:
P(C₆H₆) = 0.2961 atm
Explanation:
I found an exercise pretty similar to this, so i'm gonna use the data of this exercise to show you how to do it, and then, replace your data in the procedure so you can have an accurate result:
"At a certain temperature the vapor pressure of pure benzene (C6H6) is measured to be 0.63 atm. Suppose a solution is prepared by mixing 79.2 g of benzene and 115. g of heptane (C7H16) Calculate the partial pressure of benzene vapor above this solution. Round your answer to 2 significant digits. Note for advanced students: you may assume the solution is ideal".
Now, according to the data, we want partial pressure of benzene, so we need to use Raoul's law which is:
P = Xₐ * P° (1)
Where:
P: Partial pressure
Xₐ: molar fraction
P°: Vapour pressure
We only have the vapour pressure of benzene in the mixture. We need to determine the molar fraction first. To do this, we need the moles of each compound in the mixture.
To get the moles: n = m / MM
To get the molar mass of benzene (C₆H₆) and heptane (C₇H₁₆), we need the atomic weights of Carbon and hydrogen, which are 12 g/mol and 1 g/mol:
MM(C₆H₆) = (12*6) + (6*1) = 78 g/mol
MM(C₇H₁₆) = (7*12) + (16*1) = 100 g/mol
Let's determine the moles of each compound:
moles (C₆H₆) = 79.2 / 78 = 1.02 moles
moles (C₇H₁₆) = 115 / 100 = 1.15 moles
moles in solution = 1.02 + 1.15 = 2.17 moles
To get the molar fractions, we use the following expression:
Xₐ = moles(C₆H₆) / moles in solution
Xₐ = 1.02 / 2.17 = 0.47
Finally, the partial pressure is:
P(C₆H₆) = 0.47 * 0.63
P(C₆H₆) = 0.2961 atmHope this helps
A 251 ml sample of 0.45M HCl is added to 455 mL of distilled water. What is the molarity of the
final solution?
We are given:
251 mL sample of 0.45M HCl added to 455 mL distilled water
Whack a mole! (finding the number of moles):
We know that in order to find molarity, we use the formula:
Molarity = number of moles / Volume (in L)
so, number of moles is:
Number of moles = Molarity * Volume(in L)
now let's plug the values for the HCl solution to find the number of moles
Number of moles = 0.45M * 0.251 L
Number of moles = 0.113 moles
Time to concentrate (finding the final concentration):
Total final volume = 251 mL + 455 mL = 706 mL = 0.706 L
Number of moles of HCl = 0.113 moles
Molarity = Number of moles / Volume (in L)
Molarity = 0.113 / 0.706
Molarity = 0.16 M
___________________________________________________________
BONUS METHOD TIME!!!
We know the relation:
M1 * V1 = M2 * V2
where M1 and M2 are the initial and final molarities and V1 and V2 are initial and final volumes respectively
notice that I didn't mention that the volume has to be in Liters, that's because of the units being concerned with both sides of the equation, say I have the volume in mL and want to convert both these volumes to L, I would divide both sides by 1000, which would NOT change the overall value
Now, plugging values in this equation
(0.45) * (251) = (251 + 455)* (M2)
112.95 = (706)(M2)
M2 = 112.97/706 [dividing both sides by 706]
M2 = 0.16 Molar
give an example of a primary income from the rest of the world
Answer:
(1) Income Associated with the Production Process
(a) Compensation of employees
(b) Taxes and subsidies on products and
production .
(2) Property Income
(a) Investment income:
• Dividends and withdrawals from income of
quasi-corporations
• Reinvested earnings
• Interest
(b) Rent .
I hope this is correct :-)
What number should be written in front of Na to balance the equation?
Na + MgCl2 → NaCl + Mg
1
2
3
4
In order to balance the chemical equation, the coefficient of Na should be 2.