There are three naturally occurring isotopes of magnesium. Their masses and percent natural abundancesare 23.985042 u, 78.99%; 24.985837 u, 10.00%; and 25.982593 u, 11.01%. Then the weighted- average atomic mass of magnesium is 24.305 u.
Given the following data, we can find the weighted-average atomic mass of Magnesium. The three naturally occurring isotopes of Magnesium are 23.985042 u, 78.99%; 24.985837 u, 10.00%; and 25.982593 u, 11.01%.
Weighted-average atomic mass of magnesium (Mg):
We know that:
Weighted-average atomic mass of magnesium (Mg)
= (Mass of isotope 1 × % abundance of isotope 1) + (Mass of isotope 2 × % abundance of isotope 2) + (Mass of isotope 3 × % abundance of isotope 3) / 100
Whereas,
Mass of isotope 1 (A) = 23.985042 u
% abundance of isotope 1 (a) = 78.99%
Mass of isotope 2 (B) = 24.985837 u
% abundance of isotope 2 (b) = 10.00%
Mass of isotope 3 (C) = 25.982593 u
% abundance of isotope 3 (c) = 11.01%
Putting the values in the above formula,
Weighted-average atomic mass of magnesium (Mg)
= [(23.985042 u × 78.99%) + (24.985837 u × 10.00%) + (25.982593 u × 11.01%)] / 100
= 24.305 u
The weighted-average atomic mass of Magnesium is 24.305 u.
To learn more about weighted average: https://brainly.com/question/18554478
#SPJ11
Gas is $5 a gallon. The vehicle gets 20 mpg. Tech makes $30 an hour. He speeds 15 mph over the speed limit. The speeding increases thebfule cost bt 30%. How much money per minute does the speeding cost extra in fuel? How much $ per minute does the speeding save the company in tech pay?
The speeding cost extra $0.38025 per minute in fuel. The speeding saves the company $2 per minute in tech pay.
Gas is $5 a gallon. The vehicle gets 20 mpg. Tech makes $30 an hour. He speeds 15 mph over the speed limit. The speeding increases the fuel cost by 30%.To calculate the cost per minute of speeding in fuel, we need to first calculate how much fuel the car uses per minute. The vehicle gets 20 miles per gallon of fuel. Thus, it uses 1 gallon of fuel every 20 miles. Suppose the speed limit is 55 mph. When Tech speeds at 15 mph over the speed limit, his speed becomes 70 mph. At 70 mph, the car travels 1.17 miles in a minute [(70 miles/hour) x (1 hour/60 minutes)].Thus, the car uses 1/20 gallons of fuel to travel 1 mile, so it uses 1.17/20 = 0.0585 gallons of fuel in a minute.
When the speeding increases the fuel cost by 30%, the cost of fuel per gallon becomes $5.00 × 1.3 = $6.50.
Therefore, the cost per minute of speeding in fuel is: Cost per minute of speeding in fuel = 0.0585 gallons × $6.50 per gallon= $0.38025
Thus, the speeding cost extra $0.38025 per minute in fuel.
To calculate how much money per minute does the speeding save the company in tech pay, we need to calculate the difference in Tech's pay between his regular pay and overtime pay. Overtime pay = Regular pay + (Pay rate x 1.5)Tech's regular pay is $30 an hour, and he is speeding, so he will reach the destination faster. Assuming the destination is 30 minutes away, his regular pay would be: Regular pay = ($30/hour) x (0.5 hours) = $15
If he is driving 15 mph over the speed limit, he would reach the destination in 25 minutes instead of 30. Thus, his overtime pay would be: Overtime pay = $30 + ($30 × 1.5) = $30 + $45 = $75
Therefore, speeding saves the company $75 - $15 = $60 per half hour or $2 per minute ($60 ÷ 30).
Thus, the speeding saves the company $2 per minute in tech pay.
More on speeding cost: https://brainly.com/question/1012136
#SPJ11
Consider a differential equation df (t) =\ƒ(0), ƒ(0) = 1 (1) (i) Apply n iterations of the first-order implicit Euler method to obtain an analytic form of the approximate solution () on the interval 0/≤I. 15 marks] (ii) Using analytic expressions obtained in (i), apply the Runge rule in an- alytic form to extrapolate the approximate solutions at = 1 to the continuum limit St 0. x with not = 1. 5 marks (iii) Compare the exact solution of the ODE (1) with an approximate solution with n steps at t = 1 as well as with its Runge rule extrapolation. Demonstrate how discretization errors scale with n for of = 1/m) in both cases. 5 marks]
Given differential equation isdf (t) = ƒ(0), ƒ(0) = 1 (1)Where df (t)/dt= ƒ(0), and initial condition f (0) = 1.(i) Apply n iterations of the first-order implicit Euler method to obtain an analytic form of the approximate solution () on the interval 0≤t≤1.Here, the differential equation is a first-order differential equation.
The analytical solution of the differential equation isf (t) = f (0) e^t. Differentiating the above function with respect to time we getdf (t)/dt = ƒ(0) e^t On applying n iterations of the first-order implicit Euler method, we have: f(n) = f(n-1) + h f(n) And f(0) = 1Here, h is the time step and is equal to h = 1/nWe get f(1/n) = f(0) + f(1/n) × 1/n∴ f(1/n) = f(0) + (1/n) [f(0)] = (1 + 1/n) f(0)After 2 iterations, we get: f(1/n) = (1 + 1/n) f(0)f(2/n) = (1 + 2/n) f(0)f(3/n) = (1 + 3/n) f(0). Similarly(4/n) = (1 + 4/n) f(0).....................f(5/n) = (1 + 5/n) f(0) ........................f(n/n) = (1 + n/n) f(0) = 2f (0) Therefore, we have the approximate solution as: f(i/n) = (1 + i/n) f(0).
The approximate solution of the given differential equation is given by f(i/n) = (1 + i/n) f(0) obtained by applying n iterations of the first-order implicit Euler method on the differential equation. The solution is given by f(t) = f(0) e^t. Also, Runge rule has to be applied on this analytical expression to extrapolate the approximate solutions to the continuum limit of x with not equal to 1.
To Know More About Differential Equations, Visit:
brainly.com/question/32538700
#SPJ11
Past experience indicates that the time for high school seniorsto complete standardized test is a normal random variable with astandard deviation of 6 minutes. Test the hypothesis that σ=6against the alternative thatσ < 6 if a random sample of 20high school seniors has a standard deviation s=4.51. Use a 0.05level of significance.
In this problem, we are testing the hypothesis that the standard deviation (σ) of the time taken by high school seniors to complete a standardized test is equal to 6 minutes against the alternative hypothesis that σ is less than 6 minutes. We are given a random sample of 20 high school seniors, and the sample standard deviation (s) is found to be 4.51. The significance level is set at 0.05, and we need to determine if there is enough evidence to reject the null hypothesis.
To test the hypothesis, we can use the chi-square test statistic with (n-1) degrees of freedom, where n is the sample size. In this case, since we have a sample size of 20, the degrees of freedom would be 19.
The test statistic is calculated as (n-1)(s^2) / (σ^2), where s is the sample standard deviation. Substituting the given values, we get (19)(4.51^2) / (6^2) ≈ 14.18.
Next, we compare the test statistic with the critical value from the chi-square distribution table at a significance level of 0.05 and 19 degrees of freedom. If the test statistic is smaller than the critical value, we reject the null hypothesis; otherwise, we fail to reject the null hypothesis.
By referring to the chi-square distribution table, we find that the critical value is approximately 30.14 for a significance level of 0.05 and 19 degrees of freedom.
Since the calculated test statistic (14.18) is less than the critical value (30.14), we do not have enough evidence to reject the null hypothesis. Therefore, based on the given sample, we cannot conclude that the standard deviation of the time taken to complete the standardized test is less than 6 minutes.
To learn more about standard deviation, refer:
brainly.com/question/13498201
#SPJ11
The enzymatic activity of a particular protein is measured by counting the number of emissions of a radioactively labeled molecule. For a particular tissue sample, the counts in consecutive time periods of ten seconds can be considered (approximately) as repeated independent observations from a normal distribution. Suppose the mean count (H) of ten seconds for a given tissue sample is 1000 emissions and the standard deviation (o) is 50 emissions. Let Y be the count in a period of time of ten seconds chosen at random, determine: 11) What is the dependent variable in this study. a. Protein b. the tissue c. The number of releases of the radioactively labeled protein d. Time
Based on the information provided, the dependent variable is the number of releases of the radioactively labeled protein.
What is the dependent variable and how to identify it?The dependent variable refers to the main phenomenon being studied, which is often modified or affected by other variables involved. To identify this variable just ask yourself "What is the main variable being measured'?".
According to this, in this case, the dependent variable is " the number of releases of the radioactively labeled protein."
Learn more about variables in https://brainly.com/question/15078630
#SPJ4
Find the transition matrice from the ordered basis [(1,1,1), (1,0,0), (0,2,1) of IR³ to the ordered basis [ 12, 1.0), (91, 0ff -(1,2,1)+] of R³.
The transition matrix from the ordered basis[tex][(1,1,1), (1,0,0), (0,2,1)][/tex]of [tex]IR³[/tex] to the ordered basis [tex][ 12, 1.0), (91, 0ff -(1,2,1)+][/tex]of [tex]R³[/tex] is given by: [tex]C=\begin{bmatrix} 5 & -7 & -1\\-1 & -1 & 1\\1 & 1 & 1 \end{bmatrix}[/tex]
To find the transition matrix from the ordered basis [(1,1,1), (1,0,0), (0,2,1)] of IR³ to the ordered basis [ 12, 1.0), (91, 0ff -(1,2,1)+] of R³, follow the steps below:
Step 1: Write the coordinates of the basis [(1,1,1), (1,0,0), (0,2,1)] as columns of a matrix A and the coordinates of the basis [ 12, 1.0), (91, 0ff -(1,2,1)+] as columns of a matrix B.
[tex]A= \begin{bmatrix} 1 & 1 & 0\\1 & 0 & 2\\1 & 0 & 1 \end{bmatrix}\\B= \begin{bmatrix} 1 & 9 & 0\\2 & 1 & -1\\1 & 0 & 2 \end{bmatrix}[/tex]
Step 2: Find the matrix C such that B = AC. C is the transition matrix.
[tex]C = B A^{-1}[/tex]
Let's find the inverse of matrix A.
[tex]A^{-1}=\frac{1}{det(A)}adj(A)[/tex]
where adj(A) is the adjugate of A, which is the transpose of the cofactor matrix.
[tex]A^{-1}= \frac{1}{2} \begin{bmatrix} 2 & -2 & 2\\2 & 1 & -1\\-2 & 2 & -1 \end{bmatrix}[/tex]
Step 3: Find the product
[tex]B A^{-1}[/tex]
[tex]C=B A^{-1}=\begin{bmatrix} 1 & 9 & 0\\2 & 1 & -1\\1 & 0 & 2 \end{bmatrix} \frac{1}{2} \begin{bmatrix} 2 & -2 & 2\\2 & 1 & -1\\-2 & 2 & -1 \end{bmatrix}\\=\begin{bmatrix} 5 & -7 & -1\\-1 & -1 & 1\\1 & 1 & 1 \end{bmatrix}[/tex]
Therefore, the transition matrix from the ordered basis [tex][(1,1,1), (1,0,0), (0,2,1)][/tex]of IR³ to the ordered basis [tex][ 12, 1.0), (91, 0ff -(1,2,1)+][/tex] of[tex]R³[/tex] is given by:
[tex]C=\begin{bmatrix} 5 & -7 & -1\\-1 & -1 & 1\\1 & 1 & 1 \end{bmatrix}[/tex]
Know more about the matrix here:
https://brainly.com/question/27929071
#SPJ11
2. Starting salaries of 75 college graduates who have taken a statistics course have a mean of $43,250. Suppose the distribution of this population is approximately normal and has a standard deviation of $8,117.
Using an 81% confidence level, find both of the following:
(NOTE: Do not use commas nor dollar signs in your answers.)
(a) The margin of error:
(b) The confidence interval for the mean
a) The margin of error is given as follows: 1227.8.
b) The confidence interval is given as follows: (42022.2, 44477.8).
What is a z-distribution confidence interval?The bounds of the confidence interval are given by the rule presented as follows:
[tex]\overline{x} \pm z\frac{\sigma}{\sqrt{n}}[/tex]
In which:
[tex]\overline{x}[/tex] is the sample mean.z is the critical value.n is the sample size.[tex]\sigma[/tex] is the standard deviation for the population.The confidence level is of 81%, hence the critical value z is the value of Z that has a p-value of [tex]\frac{1+0.81}{2} = 0.905[/tex], so the critical value is z = 1.31.
The parameters for this problem are given as follows:
[tex]\overline{x} = 43250, \sigma = 8117, n = 75[/tex]
The margin of error is given as follows:
[tex]M = z\frac{\sigma}{\sqrt{n}}[/tex]
[tex]M = 1.31 \times \frac{8117}{\sqrt{75}}[/tex]
M = 1227.8.
Hence the bounds of the interval are given as follows:
43250 - 1227.8 = 42022.2.43250 + 1227.8 = 44477.8.More can be learned about the z-distribution at https://brainly.com/question/25890103
#SPJ4
Evaluate the line integral ∫C F⋅dr, where F(x,y,z)=−3xi+2yj−zk and C is given by the vector function r(t)=〈sint,cost,t〉, 0≤t≤3π/2.
To evaluate the given line integral, you need to follow the below steps:Step 1: Find the derivative of vector function r(t)=⟨sin(t), cos(t), t⟩. option (d) is the correct answer.
Step 2: Substitute the value of r'(t) and r(t) in the line integral ∫CF.dr to get the integral in terms of t.Step 3: Evaluate the integral by finding antiderivative of F with respect to t. Evaluation of given line integral using vector function[tex]`r(t)=⟨sin(t), cos(t), t⟩`, 0≤t≤3π/2 and `F(x,y,z)=−3xi+2yj−zk`[/tex]is as follows:
Step 1: First find r'(t) by differentiating r(t) with respect to t.[tex]`r'(t) = ⟨cos(t), -sin(t), 1⟩[/tex]
`Step 2: Substitute the value of r'(t) and r(t) in the line integral ∫CF.dr to get the integral in terms of [tex]t. ∫CF.dr = ∫C ⟨-3x, 2y, -z⟩.⟨⟨cos(t), -sin(t), 1⟩⟩ dt= ∫C ⟨-3sin(t), 2cos(t), -t⟩ dt[/tex] where 0≤t≤3π/2
Step 3: Now evaluate the above integral using the Fundamental Theorem of Calculus. ∫C ⟨-3sin(t), 2cos(t), -t⟩ dt =⟨[3cos(t)]t=0^(3π/2),[2sin(t)]t=0^(3π/2),[-t^2/2]t=0^(3π/2)⟩ =⟨0, 2, -[(9π^2)/(8)]⟩
So, the value of given line integral[tex]∫CF.dr is `⟨0, 2, -[(9π^2)/(8)]⟩[/tex]`.Hence, option (d) is the correct answer.
To know more about line integral visit:
https://brainly.com/question/31703032
#SPJ11
Find the absolute maximum and absolute minimum values of f on the given interval. f(x)=6x 3−9x 2−216x+1,[−4,5] absolute minimum value absolute maximum value [2.5/5 Points] SCALCET9 4.2.016. 1/3 Submissions Used Does the function satisfy the hypotheses of the Mean Value Theorem on the given interval? f(x)=x 3−3x+5,[−2,2] Yes, it does not matter if f is continuous or differentiable; every function satisfies the Mean Value Theorem. Yes, f is continuous on [−2,2] and differentiable on (−2,2) since polynomials are continuous and differentiable on R. No, f is not continuous on [−2,2]. No, f is continuous on [−2,2] but not differentiable on (−2,2). There is not enough information to verify if this function satisfies the Mean Value Theorem. c= [0/5 Points ] SCALCET9 4.2.029.MI. 1/3 Submissions Used If f(3)=9 and f′(x)≥2 for 3≤x≤7, how small can f(7) possibly be?
We select the largest and smallest y-value as the absolute maximum and absolute minimum. The function is continuous on [-2, 2] and differentiable on (-2, 2).
To find the absolute maximum and absolute minimum values of f(x) = 6x^3 - 9x^2 - 216x + 1 on the interval [-4, 5], we start by finding the critical points. The critical points occur where the derivative of the function is either zero or undefined.
Taking the derivative of f(x), we get f'(x) = 18x^2 - 18x - 216. To find the critical points, we set f'(x) equal to zero and solve for x:
18x^2 - 18x - 216 = 0.
Factoring out 18, we have:
18(x^2 - x - 12) = 0.
Solving for x, we find x = -2 and x = 3 as the critical points.
Next, we evaluate the function at the critical points and endpoints. Plug in x = -4, -2, 3, and 5 into f(x) to obtain the corresponding y-values.
f(-4) = 6(-4)^3 - 9(-4)^2 - 216(-4) + 1,
f(-2) = 6(-2)^3 - 9(-2)^2 - 216(-2) + 1,
f(3) = 6(3)^3 - 9(3)^2 - 216(3) + 1,
f(5) = 6(5)^3 - 9(5)^2 - 216(5) + 1.
After evaluating these expressions, we compare the values to determine the absolute maximum and absolute minimum values.
Finally, we select the largest y-value as the absolute maximum and the smallest y-value as the absolute minimum among the values obtained.
For the Mean Value Theorem question, the function f(x) = x^3 - 3x + 5 does satisfy the hypotheses of the Mean Value Theorem on the given interval [-2, 2]. The function is continuous on [-2, 2] and differentiable on (-2, 2) since polynomials are continuous and differentiable on the real numbers.
To learn more about function click here, brainly.com/question/31062578
#SPJ11
Evaluate the integral. (Remember to use absolute values where appropriate. Use C for the constant of integration.)
∫ x²-x+ 28 / x^3 + 7x dx = _____
The value of the integral is 4ln|x| - 4ln|x² + 7| + C.
To evaluate the integral ∫(x² - x + 28)/(x³ + 7x) dx, we can first decompose the rational function into partial fractions. Let's perform the partial fraction decomposition:
(x² - x + 28)/(x³ + 7x) = A/x + (Bx + C)/(x² + 7),
where A, B, and C are constants to be determined.
Multiplying both sides by (x³ + 7x), we have:
x² - x + 28 = A(x² + 7) + (Bx + C)x.
Expanding and collecting like terms, we get:
x² - x + 28 = Ax² + 7A + Bx² + Cx.
Comparing the coefficients of like powers of x, we have the following system of equations:
A + B = 1 (for the x² term)
C = -1 (for the x term)
7A = 28 (for the constant term)
From the last equation, we find A = 4. Substituting this into the first equation, we find B = -3. Finally, from the second equation, we find C = -1.
Therefore, the partial fraction decomposition is:
(x² - x + 28)/(x³ + 7x) = 4/x - (3x + 1)/(x² + 7).
Now, let's integrate each term separately:
∫(4/x - (3x + 1)/(x² + 7)) dx.
The integral of 4/x is 4ln|x|.
For the second term, we can perform a substitution u = x² + 7, du = 2x dx:
∫-(3x + 1)/(x² + 7) dx = ∫-(3x + 1)/u du.
This integral can be evaluated by using the natural logarithm:
-∫(3x + 1)/u du = -3∫(x/u) du - ∫(1/u) du = -3ln|u| - ln|u| + C = -4ln|u| + C.
Substituting back u = x² + 7, we have:
-4ln|x² + 7| + C.
Putting it all together, the integral becomes:
∫(x² - x + 28)/(x³ + 7x) dx = 4ln|x| - 4ln|x² + 7| + C.
Therefore, the value of the integral is 4ln|x| - 4ln|x² + 7| + C.
To learn more about integration click here:
brainly.com/question/31775095
#SPJ11
Which of the following sets of vectors in R³ are linearly dependent? Note. Mark all your choices.
a. (-2,0, 8), (-9, 4, 7), (8, -4, 5), (2, -9,0) b. (4,9,-1), (8, 18, -2) c. (-6,0, 8), (8, 7, 9), (6, 3, 5)
The set of vectors in R³ that are linearly dependent are as follows:-a. (-2,0, 8), (-9, 4, 7), (8, -4, 5), (2, -9,0)- The main answer is that the given set of vectors is linearly dependent. Let's have a detailed explanation to understand the concept of linear dependence of vectors.
Detailed a set of vectors is linearly dependent if there exist non-zero scalars c1, c2, ... cn such that
c1v1 + c2v2 + ... + cnvn = 0 where vi is the ith vector.Let us check for the above set of vectors whether the given set of vectors are linearly dependent or not using a determinant.
determinant of A.If det(A) = 0, then the given vectors are linearly dependent. If det(A) ≠ 0, then the given vectors are linearly independent.Using row operations to reduce matrix A into an upper triangular form.
learn more about vectors
https://brainly.com/question/28028700
#SPJ11
Prove each of the following statements using mathematical induction.
(f)
Prove that for any non-negative integer n ≥ 4, 3n ≤ (n+1)!.
We will prove this statement using mathematical induction.
Base case: For n = 4, we have 3n = 3(4) = 12 and (n+1)! = 5! = 120. Clearly, 12 ≤ 120, so the statement is true for the base case.
Induction hypothesis: Assume that the statement is true for some non-negative integer k ≥ 4, i.e., 3k ≤ (k+1)!.
Induction step: We need to prove that the statement is also true for k+1, i.e., 3(k+1) ≤ (k+2)!.
Starting with the left-hand side:
3(k+1) = 3k + 3
By the induction hypothesis, we know that 3k ≤ (k+1)!, so:
3(k+1) ≤ (k+1)! + 3
We can rewrite (k+1)! + 3 as (k+1)(k+1)! = (k+2)!, so:
3(k+1) ≤ (k+2)!
This completes the induction step.
Therefore, by mathematical induction, we have proven that for any non-negative integer n ≥ 4, 3n ≤ (n+1)!.
To know more about mathematical induction visit:
https://brainly.com/question/29503103
#SPJ11
(1 point) Consider the ordered bases B = ((5, −9), (−1,2)) and C = ((3, 1), (−4, 3)) for the vector space R². a. Find the transition matrix from C to the standard ordered basis E = ((1, 0), (0, 1)). TE = b. Find the transition matrix from B to E. TE= c. Find the transition matrix from E to B. TË: d. Find the transition matrix from C to B. TB = e. Find the coordinates of u = (-2,-1) in the ordered basis B. Note that [u] B = TB[u]E. [u]B= f. Find the coordinates of u in the ordered basis B if the coordinate vector of u in C is [v]C = (-2, 1). [v]B=
a) system of equations in the variables of the matrix T=[[3,4],[−1,3]]`.
b)[tex]`T= [[2,1/3],[1/5, −9/5]]`.[/tex]
c) [tex]`T =[[5, −1],[−9, 2]]` .[/tex]
d) [tex]`T=[[4,1],[−1/5,2/5]]`.[/tex]
e) [tex]`[u]B=−1/7`[/tex] and
[tex]`[v]B=−5/7`[/tex];
f) the coordinate vector of u with respect to the basis B is `[-7/5,9/5]`.
a) Find the transition matrix from C to the standard ordered basis E:
Here, we know that the coordinates of the first vector in C with respect to E is (3, 1) and the coordinates of the second vector in C with respect to E is (-4, 3).
Let T be the required transition matrix. The matrix T should map the vector (3,1) to (1,0) and the vector (-4,3) to (0,1).
Thus, we have a system of equations in the variables of the matrix T as follows:
`3a−4b=1a+3b=0`
Solving this system, we get `T=[[3,4],[−1,3]]`.
b) Find the transition matrix from B to E:
We have B=((5, −9), (−1,2)).
The transition matrix T is obtained by expressing the first basis vector (5, −9) as a linear combination of the standard basis vectors (1, 0) and (0, 1) and the second basis vector (−1, 2) also as a linear combination of the standard basis vectors (1, 0) and (0, 1).
So, we need to solve the following system:`5a−b=1−9a+2b=0`
Solving this system of equations we obtain the transition matrix `T= [[2,1/3],[1/5, −9/5]]`.
c) Find the transition matrix from E to B:
Since B is a basis for R², every vector in R² can be expressed uniquely as a linear combination of the two basis vectors in B.
In other words, given a vector in R², we can always find the coefficients of the linear combination that expresses it as a linear combination of the basis vectors in B.
These coefficients will be precisely the coordinates of the vector with respect to the basis B.
Thus, the transition matrix from E to B is simply the matrix whose columns are the coordinates of the basis vectors of B with respect to the standard basis E.
So we have:`T =[[5, −1],[−9, 2]]`
d) Find the transition matrix from C to B:
First we convert u from C to E by applying the transition matrix found in part
(a):`[u]E = [[3,4],[−1,3]] [−2−1]
=[−11,−7]`
Next, we convert the vector [u]E to the coordinate vector [u]B with respect to the basis B by applying the transition matrix found in part
(c):`[u]B=[[5,−1],[−9,2]][−11−7]
=[4,1]`
So the required transition matrix from C to B is:`T=[[4,1],[−1/5,2/5]]`
e) Find the coordinates of u = (-2,-1) in the ordered basis B.
We need to find the coordinate vector `[u]B
` such that `u = [u]B[5,−9]+[v]B[−1,2]`.
Equating coefficients, we obtain the system of equations:```−2=5[u]B−[v]B−1
=−9[u]B+2[v]B```
Solving this system of linear equations we get `[u]B= −1/7` and `[v]B=−5/7`.
So the coordinates of u with respect to the basis B are: `[u]B=−1/7` and `[v]B=−5/7`
f) Find the coordinates of u in the ordered basis B if the coordinate vector of u in C is [v]C = (-2, 1).
We know that `[u]B = TB[u]C`,
where T is the transition matrix from C to B found in part (d).
So we have:`[u]B = [[4,1],[−1/5,2/5]] [−2 1]ᵀ
= [−7/5,9/5]`
Therefore, the coordinate vector of u with respect to the basis B is `[-7/5,9/5]`.
Know more about the transition matrix
https://brainly.com/question/32572810
#SPJ11
Assume the joint pdf of X and Y is f(x,y)=xye 2 x,y> 0 otherwise 0 Are x and y are independent? Verify your answer.
X and Y are not independent, as the joint pdf cannot be factored into separate functions of X and Y.
To determine whether the random variables X and Y are independent, we need to check if their joint probability density function (pdf) can be factored into separate functions of X and Y.
The joint pdf
f(x, y) = xy × e²ˣ
where x > 0, y > 0, and 0 otherwise, we can proceed to verify if X and Y are independent.
To test for independence, we need to examine whether the joint pdf can be decomposed into the product of the marginal pdfs of X and Y.
First, let's calculate the marginal pdf of X by integrating the joint pdf f(x, y) with respect to y:
f_X(x) = ∫[0,infinity] xy × e²ˣ dy
= x × e²ˣ × ∫[0,infinity] y dy
= x × e²ˣ × [y²/2] | [0,infinity]
= x × e²ˣ × infinity
Since the integral diverges, we can conclude that the marginal pdf of X does not exist. Hence, The lack of a valid marginal pdf for X indicates a dependency between X and Y. In conclusion, X and Y are not independent based on the given joint PDF.
To learn more about Joint pdf - brainly.com/question/32519650
#SPJ11
Daniel is a category manager at one of the top FMCG companies. He earns a fixed yearly performance bonus of $2,00,000 if his category makes a positive yearly profit and nothing otherwise. Suppose historical records show that the yearly profits of the category are normally distributed with a mean of $40 million and a standard deviation of $30 million, what is the standard deviation of his yearly bonus?
a. 0.057 million
b. 0.098 million
c. 0
d. 27.5 million
To calculate the standard deviation of Daniel's yearly bonus, we need to consider the standard deviation of the category's yearly profits.
Since Daniel's bonus is dependent on the category's profit, we can use the same standard deviation value. Given that the yearly profits of the category are normally distributed with a mean of $40 million and a standard deviation of $30 million, the standard deviation of Daniel's yearly bonus would also be $30 million.
Therefore, the correct option is d. 27.5 million. This corresponds to the standard deviation of the category's yearly profits, which is also the standard deviation of Daniel's yearly bonus. It indicates the variability in the profits and consequently, the potential variability in Daniel's bonus depending on the category's performance.
To learn more about standard deviation click here: brainly.com/question/29115611
#SPJ11
One day, upon tossing the same single die 120 times, I got: 12 ones, 28 twos, 17 threes, 26 fours, 13 fives, and 24 sixes. 2 Compute X² and find P for this experiment. a. X² b. P = ? c. Is the die b
In this question, we are given that we have tossed a die 120 times, and got the following outcomes: 12 ones, 28 twos, 17 threes, 26 fours, 13 fives, and 24 sixes. We need to find X² and P for this experiment. a. X² = 4.6b. P = not enough evidence to reject null hypothesisc. The die is not biased
The formula for finding X² is given as:[tex]$$ X² = \sum \frac{(O - E)²}{E} $$[/tex] Where O is the observed frequency and E is the expected frequency. To find E, we need to divide the total number of tosses by the number of sides on the die. Here, we have a single die, which has 6 sides, so E = 120/6 = 20.
Now, we can find X² using the formula as follows:[tex]$$ X² = \frac{(12-20)²}{20} + \frac{(28-20)²}{20} + \frac{(17-20)²}{20} + \frac{(26-20)²}{20} + \frac{(13-20)²}{20} + \frac{(24-20)²}{20} $$[/tex] . Looking up the table, we find that the critical value for 5 degrees of freedom at 0.05 significance level is 11.070. Since X² = 4.6 < 11.070, we can say that there is not enough evidence to reject the null hypothesis that the die is fair. Therefore, we conclude that the die is not biased.
To know more about hypothesisc visit:
https://brainly.com/question/30513805
#SPJ11
Do Only 19% of High School Students Take Calculus? In the United States, Calculus is used to test student's abilities to use math to solve problems of continuous change. Though, it seems that calculus has now become a class for those who are looking to be admitted into selective universities, and often kids take it because it looks good on a transcript." While calculus is crucial in many STEM fields, colleges still favor those who took it over those who didn't. A study done by Admissions Insider, in the article "Does Calculus Count Too Much in Admissions?" stated that only 19% of students in the United States take calculus. With this, I will find if my private school, Phoenix Country Day School, aligns with that statistic, or if attending a private school pushes students to strive for the best colleges. I (Wade Hunter) have taken a dom sample of 65 juniors and seniors and asked them the question: Do you or will you take calculus in high school? The responses showed that 6 are taking or are going to be taking calculus in high school, and that 59 are going to be taking calculus in high school. This means that 90.7% of my sample is or plans on taking calculus in their high school, Phoenix Country Day School Is there convincing statistical evidence that only 19% of high schoolers take calculus? SRS- Large Counts (Central Limit Theorem n> or equal to 30) - 10% Rule -
Since the p-value is less than the significance level of 0.05, we reject the null hypothesis. This provides convincing statistical evidence that the proportion of high school students taking calculus is not 19%.
Using the normal approximation, we can calculate the test statistic (z-score) and the corresponding p-value. Assuming a significance level of 0.05, we can determine if there is enough evidence to reject the null hypothesis.
Let's calculate the test statistic and p-value using the provided data:
Sample size (n): 65
Number of students taking calculus (x): 59
Sample proportion (p):
= x/n
= 59/65
≈ 0.908
Population proportion (p₀): 0.19
Calculating the standard error of the proportion:
SE = √[(p₀ * (1 - p₀)) / n]
SE = √[(0.19 * (1 - 0.19)) / 65]
≈ 0.049
Calculating the test statistic (z-score):
z = (p - p₀) / SE
z = (0.908 - 0.19) / 0.049
≈ 15.388
To know more about null hypothesis,
https://brainly.com/question/20115045
#SPJ11
Homework art 1 012 Points: 0 of 1 Save A poll by a reputable research center asked, " you won 10 million dollars in the lottery, would you continue to work or stop working? Of the 1009 adults from a certain country surveyed, 703 said that they would continue working. Use the one-proportion plus-four z-interval procedure to obtain a 90% confidence interval for the proportion of all adults in the country who would continue working if they won 10 million dollars in the lottery Interpret your results, The plus-four 90% confidence interval in from to Round to three decimal places as needed. Use ascending order)
The 90% confidence interval for the proportion of all adults in the country who would continue working if they won 10 million dollars in the lottery is from 0.660 to 0.770.
To obtain the 90% confidence interval using the one-proportion plus-four z-interval procedure, we start by calculating the sample proportion, which is the proportion of adults who said they would continue working in the survey.
In this case, 703 out of 1009 adults said they would continue working, so the sample proportion is 703/1009 = 0.695.
Next, we calculate the margin of error, which is the critical value multiplied by the standard error. The critical value for a 90% confidence interval is 1.645.
The standard error is calculated as the square root of (p(1-p)/n), where p is the sample proportion and n is the sample size. Plugging in the values, we get a standard error of √((0.695(1-0.695))/1009) = 0.015.
The margin of error is then 1.645 * 0.015 = 0.025.
Finally, we construct the confidence interval by subtracting and adding the margin of error to the sample proportion.
The lower bound is 0.695 - 0.025 = 0.670, and the upper bound is 0.695 + 0.025 = 0.720. Rounding to three decimal places, the 90% confidence interval is from 0.660 to 0.770.
Based on the survey data, we can say with 90% confidence that the proportion of all adults in the country who would continue working if they won 10 million dollars in the lottery is estimated to be between 0.660 and 0.770.
This means that in the population, anywhere from 66% to 77% of adults would choose to continue working even after winning the lottery.
The confidence interval provides a range of plausible values for the true proportion in the population.
It is important to note that the interval does not guarantee that the true proportion falls within it, but it gives us a level of certainty about the estimate. In this case, we can be 90% confident that the true proportion lies within the reported interval.
Learn more about confidence intervals
brainly.com/question/13067956
#SPJ11
find the value of z such that 0.13 of the area lies to the left of z. round your answer to two decimal places.
The value of z such that 0.13 of the area lies to the left of z is z = (1.14). Rounding this to two decimal places gives us z = 1.14 (rounded to two decimal places).
A z-score (aka, a standard score) indicates how many standard deviations an element is from the mean.
A z-score can be calculated from the following formula: z = (X - μ) / σwhere:z = the z-scores = the value of the elementμ = the population meanσ = the standard deviation
Let z be the value such that 0.13 of the area lies to the left of z.
This means that 87% (100% - 13%) of the area lies to the right of z.
Using the standard normal distribution table, we find the z-score that corresponds to an area of 0.87.
We can also solve this using the inverse normal distribution function of a calculator or statistical software.
The z-score that corresponds to an area of 0.87 is 1.14.
Know more about decimal places here:
https://brainly.com/question/28393353
#SPJ11
Circular swimming pool and is 10 feet across the center. How far will Jana swim around the pool?
A.62.8 ft
B.52 ft
C.31.4 ft
D.20 ft
Jana will swim approximately 31.4 feet around the circular swimming pool. The correct option is c.
To calculate the distance Jana will swim around the pool, we need to find the circumference of the circle.
The circumference of a circle can be calculated using the formula C = πd, where C represents the circumference and d represents the diameter of the circle.
In this case, the diameter of the pool is given as 10 feet, so we can substitute the value of d into the formula:
C = π * 10
Using an approximate value of π as 3.14, we can calculate the circumference of a circle:
C ≈ 3.14 * 10
C ≈ 31.4 feet
Therefore, Jana will swim approximately 31.4 feet around the pool. Option c is the correct answer.
To know more about circumference refer here:
https://brainly.com/question/28757341#
#SPJ11
Exponential Expressions: Half-Life and Doubling Time Question 7 of 20 SUITERALLempertugruas Write the given function in the form Q = ab. Give the values of the constants a and b. Q = 1/2 6 NOTE: Enter the exact answers. a b= II 11
The given function Q = 1/2^6 can be written in the form Q = ab, where we need to determine the values of the constants a and b.
To express Q = 1/2^6 in the form Q = ab, we need to find the values of a and b. In this case, Q is equal to 1/2^6, which means a = 1 and b = 1/2^6.
The constant a represents the initial quantity or value, which is 1 in this case. The constant b represents the rate of change or growth factor, which is equal to 1/2^6. This indicates that the quantity Q decreases by half every 6 units of time, representing the concept of half-life.
Therefore, the function Q = 1/2^6 can be expressed in the form Q = ab with a = 1 and b = 1/2^6.
To learn more about growth factor click here :
brainly.com/question/12052909
#SPJ11
The following are the grades of 50 students who took the test in mathematics. Make a frequency distribution table. 75 78. 70. 80. 82 77 84. 82. 92. 95 85. 87. 71. 72. 88 93. 91. 74 83. 81 77. 85. 74 86. 79 75. 88. 76. 74. 70 78. 80. 73. 86. 94 92. 90. 89 79. 75 76. 75. 80. 84. 90 92. 90. 87. 77. 96
The frequency distribution table, when using intervals of 5, based on the scores in math, is shown.
How to find the frequency distribution ?According to the data in the table, the grade range of 75-79 was the most frequently occurring with 6 students earning a grade within that range.
Following that, 5 students acquired a grade within the range of 80-84, making it the second most prevalent grade range. Out of all the grade intervals, the smallest number of students - only two - were awarded grades between 95 and 99.
According to the data displayed in the table, the mean score was 82. To obtain the average, you need to sum all the grades and then divide the result by the total number of grades.
Find out more on frequency distributions at https://brainly.com/question/27820465
#SPJ1
Given av av 25202 +S= _V, ат as² as find a change of variable of S to x(S) so that this equation has constant coefficients. =
To find a change of variable that transforms the equation av av 25202 + S = √(as² + as) into an equation with constant coefficients, we can use a substitution method. By letting x = x(S), we can determine the appropriate transformation that will make the equation have constant coefficients.To begin, we need to determine the appropriate transformation that will eliminate the variable S and yield constant coefficients in the equation. Let's assume that x = x(S) is the desired change of variable.
We can start by differentiating both sides of the equation with respect to S to obtain:
dv/dS = d(√(as² + as))/dSNext, we can rewrite the equation in terms of x(S) by substituting S with the inverse transformation x⁻¹(x):
av av 25202 + x⁻¹(x) = √(as² + as).
By simplifying and rearranging the equation, we can find the specific transformation x(S) that will yield constant coefficients. The exact form of the transformation will depend on the nature of the equation and the specific values of a and s.Once the transformation x(S) is determined, the equation will have constant coefficients, allowing for easier analysis and solution.
learn more about variable here:brainly.com/question/15078630
#SPJ11
if x = u2 – v2, y = 2uv, and z = u2 + v2, and if x = 11, what is the value of z ?
Based on the information abover, the value of z is (-1 + √45) / 2.
From the question above, x =u² – v² ... Equation (1)
y = 2uv ... Equation (2)
z = u² + v² ... Equation (3)
Also given that
x = 11 ... Equation (4)
Using equations (1) and (4), we get:
u² – v² = 11 ... Equation (5)
From equations (2) and (3), we have:
y² + z² = (2uv)² + (u² + v²)²= 4u²v² + u4 + v4 + 2u²v²+ 2u²v² + 2uv²= u4 + 6u²v² + v4 ... Equation (6)
Adding equations (5) and (6), we get:
u² + v² + u⁴ + 6u²v² + v⁴ = 11 + u⁴ + 2u²v² + v⁴= 11 + (u² + v²)²= 11 + z²
So,z² = 11 + u² + v²= 11 + z (from equation 3)
Thus,z² = 11 + z
On solving the above equation, we get:z² - z - 11 = 0
On solving the quadratic equation, we get:z = - ( - 1 ± √45) / 2
The positive value of z is given by:
z = (-1 + √45) / 2
Learn more about equations at:
https://brainly.com/question/29670281
#SPJ11
The number of bacteria in refrigerated food has a function of the temperature of the food in Celsius is modeled by the function B(t) = 20t^2-20t+120.
At what temperature will there be no bacteria in the food?
There will be no bacteria in the food when the temperature of the food is 115°C.
The given function is [tex]B(t) = 20t² - 20t + 120.[/tex]
The function represents the number of bacteria in refrigerated food as a function of the temperature of the food in Celsius.
We are to determine at what temperature there will be no bacteria in the food.
To find the temperature at which there will be no bacteria in the food, we need to determine the minimum value of the function B(t). We can do this by finding the vertex of the quadratic function B(t).
We know that the vertex of a quadratic function [tex]y = ax² + bx + c[/tex] is given by the formula:
[tex]x = \frac{-b}{2a},\ y = \frac{-\Delta}{4a}[/tex]
where Δ is the discriminant of the quadratic function, which is given by:
\Delta = b^2 - 4ac
Comparing this formula with the function [tex]B(t) = 20t² - 20t + 120[/tex], we get:
[tex]a = 20, b = -20, c = 120[/tex]
Therefore,
[tex]\Delta = (-20)^2 - 4(20)(120)\\\Delta = 400 - 9600 = -9200[/tex]
Since Δ < 0, the vertex of the function [tex]B(t) = 20t² - 20t + 120[/tex] is given by:
[tex]t = \frac{-(-20)}{2(20)}\\t = \frac{1}{2}[/tex]
Substituting this value of t in the function B(t), we get:
[tex]B\left(\frac{1}{2}\right) = 20\left(\frac{1}{2}\right)^2 - 20\left(\frac{1}{2}\right) + 120\\B\left(\frac{1}{2}\right) = 20\left(\frac{1}{4}\right) - 10 + 120\\B\left(\frac{1}{2}\right) = 5 - 10 + 120\\B\left(\frac{1}{2}\right) = 115[/tex]
Therefore, there will be no bacteria in the food when the temperature of the food is 115°C.
Know more about function here:
https://brainly.com/question/2328150
#SPJ11
A factory engaged in the manufacturing of pistons, rings, and valves for which the profits per unit are Rs. 10, 6, and 4, respectively wants to decide the most profitable mix. It takes one hour of preparatory work, ten hours of machining, and two hours of packing and allied formalities for a piston. Corresponding time requirements for the rings and valves are 1, 4 and 2 and 1, 5 and 6 hours, respectively. The total number of hours available for preparatory work, machining, and packing and allied formalities are 100, 600 and 300, respectively. Determine the most profitable mix, assuming that what all produced can be sold. Formulate the LP. [SM]
Previous question
The LP model is Maximize [tex]Z = 10 x1 + 6 x2 + 4 x[/tex]3 subject to the following constraints: x[tex]1 + x2 + x3 ≤ 10010x1 + 4x2 + 5x3 ≤ 6002x1 + 2x2 + 6x3 ≤ 300.[/tex]
The time taken for preparatory work, machining, and packing and allied formalities for pistons are 1 hour, 10 hours, and 2 hours.
The time taken for preparatory work, machining, and packing and allied formalities for rings are 1 hour, 4 hours, and 2 hours.
The time taken for preparatory work, machining, and packing and allied formalities for valves are 1 hour, 5 hours, and 6 hours. The total hours available for preparatory work, machining, and packing and allied formalities are 100 hours, 600 hours, and 300 hours respectively.
Formulate the LP (Linear Programming) model.
Let x1, x2, and x3 be the number of pistons, rings, and valves produced respectively.
Total profit [tex]= 10 x1 + 6 x2 + 4 x3[/tex]
Maximize [tex]Z = 10 x1 + 6 x2 + 4 x3 …(1)[/tex]
subject to the following constraints:
[tex]x1 + x2 + x3 ≤ 100 …(2)\\10x1 + 4x2 + 5x3 ≤ 600 …(3)\\2x1 + 2x2 + 6x3 ≤ 300 …(4)[/tex]
The above constraints are arrived as follows:
The total hours available for preparatory work are 100.
The time taken for preparing one piston, ring, and valve is 1 hour, 1 hour, and 1 hour respectively.
Hence, the number of pistons, rings, and valves produced should not exceed the total hours available for preparatory work, i.e., 100 hours.
[tex]x1 + x2 + x3 ≤ 100[/tex] …(2)
The total hours available for machining are 600.
The time taken for machining one piston, ring, and valve is 10 hours, 4 hours, and 5 hours respectively.
Hence, the total time taken for machining should not exceed the total hours available for machining, i.e., 600 hours. [tex]10x1 + 4x2 + 5x3 ≤ 600[/tex]…(3)
The total hours available for packing and allied formalities are 300.
The time taken for packing and allied formalities for one piston, ring, and valve is 2 hours, 2 hours, and 6 hours respectively.
Hence, the total time taken for packing and allied formalities should not exceed the total hours available for packing and allied formalities, i.e., 300 hours. [tex]2x1 + 2x2 + 6x3 ≤ 300[/tex] …(4)
Thus, the LP model is Maximize [tex]Z = 10 x1 + 6 x2 + 4 x[/tex]3 subject to the following constraints: x[tex]1 + x2 + x3 ≤ 10010x1 + 4x2 + 5x3 ≤ 6002x1 + 2x2 + 6x3 ≤ 300.[/tex]
Know more about constraints here:
https://brainly.com/question/30655935
#SPJ11
The diameter of a circle is 24 yards. What is the circle's circumference?
(3) Determine if the geometric series converges or diverges. If a series converges, find its sum 2 4 3 (a) › ¹ + (?) + (? ) ² + ( 3 ) ² + ( 3 ) * + ) ) + ()* - * - )* + + ( ( * +....(b) · +...
a) The given geometric series diverges.
(b) The given series is not specified, so we cannot determine if it converges or diverges.
(a) To determine if the series converges or diverges, we need to examine the common ratio, which is the ratio between consecutive terms. However, in the given series 2 4 3 (a) › ¹ + (?) + (? ) ² + ( 3 ) ² + ( 3 ) * + ) ) + ()* - * - )* + + ( ( * +..., the pattern or values of the terms are not clear. Without a clear pattern or values, it is difficult to determine the common ratio and analyze convergence. Therefore, the
convergence
of this series cannot be determined.
(b) The given series is not specified, so we cannot determine if it converges or diverges without additional information. To determine convergence or
divergence
of a series, we usually examine the common ratio or apply various convergence tests. However, in this case, without any specific information about the series, it is not possible to make a determination.
In summary, for part (a), the given geometric series is indeterminate as the pattern or values of the terms are not clear, making it difficult to determine convergence or divergence. For part (b), without any specific information about the series, we cannot determine if it converges or diverges.
To learn more about
diverges
brainly.com/question/31778047
#SPJ11
be the Find two numbers whose difference is 82 and whose product is a mi smaller number 41 larger number 41 Read 2. [-/2 Points] DETAILS MY NOTES ASK YOUR TEACHER A poster is to have an area of 510 cm
To find two numbers whose difference is 82 and whose product is a minimum, we can set up a system of equations and solve for the numbers. Let's assume the smaller number is x and the larger number is y. From the given conditions, we have the following equations:
y - x = 82 (the difference is 82)
xy = y + 41 (the product is a smaller number 41 larger number 41)
To find the minimum product, we need to minimize the value of y. We can rewrite equation 2 as y = (y + 41)/x and substitute it into equation 1:
(y + 41)/x - x = 82
Now, we can simplify and rearrange the equation:
(y + 41) - x^2 = 82x
x^2 + 82x - y - 41 = 0
Solving this quadratic equation will give us the value of x. Once we have x, we can substitute it back into equation 1 to find y. The two numbers that satisfy the given conditions will be the solutions to this system of equations.
It is important to note that there might be multiple solutions to this system of equations, depending on the nature of the quadratic equation.
Learn more about quadratic equation here: brainly.com/question/30098550
#SPJ11
7. Prove that, for any two vectors à and b, là × b | = |(à. â) (b. b) – (ã. b)²
To prove that for any two vectors a and b, |a × b| = |(a·a)(b·b) – (a·b)², we need to use the properties of cross products and dot products.
We start by computing the left-hand side: |a × b| = ||a|| ||b|| sin θ, where θ is the angle between a and b. But we can express the magnitude of the cross product in terms of dot products using the identity:[tex]|a × b|² = (a · a)(b · b) – (a · b)².So,|a × b| = sqrt[(a · a)(b · b) – (a · b)²][/tex]
Next, we use the distributive property of dot products and write:[tex](a · a)(b · b) – (a · b)^2 = (a · a)(b · b) – 2(a · b)(a · b) + (a · b)² = (a · a)(b · b) – (a · b)^2[/tex]We can then substitute this expression into the previous equation to get:|a × b| = sqrt[(a · a)(b · b) – (a · b)²], [tex]|a × b| = sqrt[(a · a)(b · b) – (a · b)²][/tex]which is the right-hand side of the equation. Therefore, we have proven that |a × b| = |(a·a)(b·b) – (a·b)², for any two vectors a and b.
To know more about cross products visit -
brainly.com/question/29097076
#SPJ11
Substance A decomposes at a rate proportional to the amount of A present. It is found that 12 lb of A will reduce to 6 lb in 3.1 hr. After how long will there be only 1 lb left? There will be 1 lb left after hr (Do not round until the final answer. Then round to the nearest whole number as needed.)
It is given that substance A decomposes at a rate proportional to the amount of A present. In other words, the decomposition of substance A follows first-order kinetics.
Suppose the initial amount of substance A present is A₀. After time t, the amount of A remaining is given byA = A₀e^(−kt)Here, k is the rate constant of the reaction.
We are also given that 12 lb of A will reduce to 6 lb in 3.1 hr. Using this information, we can calculate the rate constant k.Let A₀ = 12 lb, A = 6 lb, and t = 3.1 hr.
Substituting these values in the equation above, we get6 = 12e^(−k×3.1)Simplifying this expression, we gete^(−k×3.1) = 0.5Taking the natural logarithm on both sides, we get−k×3.1 = ln 0.5Solving for k, we getk ≈ 0.2236 hr^(-1)Using the value of k, we can find the time taken for the amount of substance A to reduce from 12 lb to 1 lb.Let A₀ = 12 lb, A = 1 lb, and k ≈ 0.2236 hr^(-1).
Solving for t, we gett ≈ 10.74 hrTherefore, there will be 1 lb left after 10.74 hours (rounded to the nearest whole number).Answer: 11.
to know more about amount visit:
https://brainly.com/question/19767319
#SPJ11