The AMPLITUDE of a wave is the maximum distance that the particles in a medium move from their rest position as the wave passes.
Which option best describes electromagnetic waves that have enough energy to change atoms or molecules into ions?
A. Waves with low frequency
B. Ionizing radiation
C. Waves with long wavelength
D. Non-ionizing radiation
Answer:
B.Ionizing radiation is the correct answer.
Explanation:
Ionizing radiation has sufficient energy that it can convert atoms and molecules into ions.
It has a sufficient amount of energy that it can separate tightly confined electrons from the orbit of an atom and causing that atom to become ionized.
Answer: lonizing radiation
Explanation:
Got it right
A chunk of beef has a mass of 11.6 grams and a volume of 58 cm3. What is the density of the chucky beef?
Group of answer choices
46.4
0
672.8
0.2
5
Answer:
0.2g/cm³
Explanation:
Given parameters:
Mass of the beef = 11.6g
Volume = 58cm³
Unknown:
Density = ?
Solution:
Density is the mass per unit volume of a substance.
Density = [tex]\frac{mass}{volume}[/tex]
So;
Density = [tex]\frac{11.6}{58}[/tex] = 0.2g/cm³
A golfer collected data on the distance a golf cart traveled in a straight line and plotted it on a graph
Which of these does NOT describe the cart’s motion on this graph?
The cart was at rest between 5 s and 7 s.
The cart moved toward the starting point between 7 s and 12 s.
The cart moved away from the starting point between 8 s and 10 s.
The cart moved away from the starting point between 2 s and 5 s.
Answer:
The cart moved away from the starting point between 8 s and 10 s.
Explanation:
Given that :
Which of these does NOT describe the cart’s motion on this graph?
The cart was at rest between 5 s and 7 s : From the distance of golf cart Vs time graph ; the car was at rest between 5s and 7s as the graph was flat with that time interval, meaning there was no change in distance.
The cart moved toward the starting point between 7 s and 12 s. : The graph depicts a negative slope at this time interval as the distance from starting point fell from about 26 m to 10 m
The cart moved away from the starting point between 8 s and 10 s. : At this time interval, the cart moved towards the starting not and not away. This could be seen in the decrease in Distance from starting point between the tune interval.
The cart moved away from the starting point between 2 s and 5 s. - - > The cart moved away from the starting point, with the positive slope signifying an increase in distance.
Therefore, The cart moved away from the starting point between 8 s and 10 s does not describe the motion of the cart on the graph.
Refer to your Expeditions in Reading book for a complete version of this text.
Based on “Solar Power for Public Buildings,” which answer best states the author’s position on the use of solar power in California?
A The use of solar energy will double the pollution produced in California.
B The state’s tap water will be purer if processed in solar-powered plants.
C Increasing the use of solar power will positively impact the environment.
D Solar panels remove most of the toxic chemicals found in the atmosphere.
Answer:
d
Explanation:
Answer:
D. Solar panels remove most of the toxic chemicals found in the atmosphere.
People do not believe it is possible to use the sun's energy to create electricity.
Explanation:
I did the test.
Explain the Difference between genetic diversity and ecosystem diversity?
Answer:
1. Genetic diversity are the differences in DNA among individuals within a species or population while ecosystem diversity is the number or variety of ecosystems within a particular area.
2. Genetic diversity is the genetic material of microorganisms, plants and animals contains information that determines the characteristics of all species and individuals that make up the diversity of the living world while the ecosystem diversity is the enormous range of terrestrial and aquatic environments on earth has been classified into a number of ecosystems.
4. A baseball is pitched with a speed of 35 m/s. If the baseball has a mass of 0.146 kg, what is its
Kinetic energy? (35 m/s = 78 mph just FYI - use the m/s)
Answer: 89 J
Explanation:
The kinetic energy of the baseball with the given mass and speed is 89.425 Joules.
What is the Kinetic energy of the baseball?Kinetic energy is simply a form of energy a particle or object possesses due to its motion.
It is expressed as;
K = (1/2)mv²
Where m is mass of the object and v is its velocity.
Given the data in the question;
Mass of the baseball m = 0.146kgVelocity v = 35m/sKinetic energy of the baseball K = ?K = (1/2)mv²
K = (1/2) × 0.146kg × (35m/s)²
K = 0.5 × 0.146kg × 1225m²/s²
K = 89.425kgm²/s²
K = 89.425J
The kinetic energy of the baseball with the given mass and speed is 89.425 Joules.
Learn more about kinetic energy here: brainly.com/question/12669551
#SPJ9
1. If a rock is dropped from a 600 meter cliff, how long will it take to hit the ground?
Dl
Answer:
11.1s
Explanation:
Given parameters:
Height of cliff = 600m
Unknown:
How long it takes to hit the ground = ?
Solution:
To solve this problem, we use one of the kinematics equation;
H = ut + [tex]\frac{1}{2}[/tex]gt²
H is the height
u is the initial velocity = 0m/s
t is the time taken
g is the acceleration due to gravity
600 = [tex]\frac{1}{2}[/tex] x 9.8 x t²
600 = 4.9t²
t² = 122.5
t = 11.1s
Which electromagnetic waves have the shortest wavelength and the highest frequency?
waves
Answer: Gamma rays (violet) have the shortest wavelengths and the highest frequencies.
Explanation: The wavelength of the gamma rays is less than 0.01 nanometers. The frequency of a wave is inversely proportional to its wavelength. That means that waves with a high frequency have a short wavelength, while waves with a low frequency have a longer wavelength.
The electromagnetic waves have the shortest wavelength and the highest frequency is Gamma rays (violet).
What are gamma rays?Gamma radiation, from gamma rays (γ), is a type of electromagnetic radiation usually produced by radioactive elements. Gamma rays, due to their high energy, are able to penetrate matter more deeply than alpha or beta radiation.
Gamma ray is a type of high frequency electromagnetic radiation usually produced by radioactive elements.
See more about Gamma rays at brainly.com/question/23281551
How does the sun maintain its high temperature and energy output?
Answer:
The core of the sun is the region that extends from the center to about 20–25% of the solar radius. It is here, in the core, where energy is produced by hydrogen atoms (H) being converted into nuclei of helium (He). ... The core is the only part of the sun that produces an appreciable amount of heat through fusion.
Explanation:
I got you
By not running out of fuel (Hydrogen).
Rest assured ... When the sun runs low on Hydrogen, it'll go through several complex changes, and it'll end up at much much lower temperature, with much much lower energy output.
Two children, totaling 200 kg, are traveling at 10 m/sec in a 100-kg bumper car during an
amusement park ride. They deliberately collide with an empty second car, mass 100 kg, which is
at rest. What is the momentum of the empty car?
Answer:
0kgm/s
Explanation:
The momentum of the empty car is zero.
Momentum is the quantity of motion a body possess. The more the mass and velocity by which a body moves, the higher is its momentum.
Momentum = mass x velocity
Since the second car is at rest, the velocity is 0m/s;
So;
Momentum = 100 x 0 = 0kgm/s
Therefore, a body at rest has zero momentum
What type of cells provide humoral immunity ?
Answer:
Antibody molecules that are secreted by plasma cells mediate the humoral immune response. The antigen that binds to the receptor of the B-cell antigen signals B cells and is internalized and transformed into peptides that activate the armed helper at the same time.
Explanation:
Answer:
B cells
Explanation:
Humoral immunity or humoural immunity is the aspect of immunity that is mediated by macromolecules found in extracellular fluids such as secreted antibodies, complement proteins, and certain antimicrobial peptides. Humoral immunity is named so because it involves substances found in the humors, or body fluids. It contrasts with cell-mediated immunity. Humoral immunity is also referred to as antibody-mediated immunity.
The bottom of a ladder must be placed 4 feet from a wall. The ladder is 12 feet long. How far above the ground does the ladder touch the wall? Estimate your answer to the nearest tenth.
Answer:
Height of wall (Perpendicular) = 11.31 ft (Approx)
Explanation:
Given:
Base Distance (Base) = 4 feet
Height of ladder (Hypotenuse) = 12 feet
Find:
Height of wall (Perpendicular)
Computation:
Perpendicular = √Hypotenuse² - Base²
Height of wall (Perpendicular) = √12² - 4²
Height of wall (Perpendicular) = √144 - 16
Height of wall (Perpendicular) = √128
Height of wall (Perpendicular) = 11.31 ft (Approx)
help me!
Bill left a hammer out in the rain all day. The next morning it had rust on it.
Oxygen and a metal chemically combine to form rust. What is rust an example of?
O a mixture
• a solution
an element
a compound
Answer:D.Compound
Explanation: internet
Find the acceleration of a 600 kg car that experiences an impulse of 18,000 kgm/s in 0.05 seconds.
I need help with this question, i don’t understand it
Answer:
what?
Explanation:
Answer:
600m/s²
Explanation:
Given parameters:
Mass of car = 600kg
Impulse = 18000kgm/s
Time = 0.05s
Unknown:
Acceleration = ?
Solution:
To solve this problem, let us find the force that cause the impact first;
Impulse = Force x time
Force = [tex]\frac{impulse}{time}[/tex] = [tex]\frac{18000}{0.05}[/tex] = 360000N
So;
Force = mass x acceleration
Acceleration = [tex]\frac{Force }{mass}[/tex] = [tex]\frac{360000}{600}[/tex]
Acceleration = 600m/s²
What was the name of the first oil well in the UAE?
A.Murban
B.ADNOC
C.Murhabba
D.OLPEC
Answer:
B.ADNOCExplanation:
the Abu Dhabi Petroleum Company
The first commercially viable oil discovery was made at Bab in 1960. In 1962, the company was renamed the Abu Dhabi Petroleum Company. Exports began to flow from the Jebel Dhanna terminal on December 14, 1963.
Answer:
hiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
An unknown element has been studied in the lab. It has been shown to be malleable, ductile, and a good conductor of heat. Which element best fits this description?
1.) What type of energy is associated with motion?
2)List 3 items that store chemical energy ?
What are 2 benefits from vitamin b and 2 food sources?
0.0135 kg of steam at 100°C is
cooled, which turns it into water at
50.0°C. How much heat has been
removed? (Remember, it has to
change phase before cooling
down.)
Boil Pt (°C)
Material Melt Pt (°C) 4 0/kg)
Water
0
3.33.105
L(/kg) c (J/(kg*C))
2.26.106 4186
100
(Unit = J)
Answer:
33333.35 kg
Explanation:
I got it right on Acellus, rounded to 33300 sigfigs
When 0.0135 kg of steam at 100°C is cooled, turns it into water at 50.0°C. Then 33,342.45 J of heat has been removed.
What is latent heat?Latent heat is the heat absorbed or released by a substance during a change in its physical state without a corresponding change in temperature. This means that the heat energy is being used to break or form intermolecular bonds between the particles in the substance, rather than raising or lowering the temperature. Examples of processes that involve latent heat include melting, freezing, vaporization, and condensation. The amount of heat required or released during these phase transitions is dependent on the substance and the amount of material undergoing the change.
Here in the question,
To solve this problem, we need to use the formula for the heat required to change the phase of a substance, which is given by:
Q = m * L
where Q is the heat required, m is the mass of the substance, and L is the specific latent heat of the substance.
In this case, we need to find the heat required to change 0.0135 kg of steam at 100°C to water at 100°C, and then cool it down to 50°C.
First, we need to find the heat required to change the phase of the steam to water at 100°C. Using the table given, we can see that the specific latent heat of vaporization for water is 2.26 × 10^6 J/kg. So the heat required to change 0.0135 kg of steam to water at 100°C is:
Q1 = m * L = 0.0135 kg * 2.26 × 10^6 J/kg = 30,510 J
Next, we need to find the heat required to cool the water from 100°C to 50°C. Using the specific heat capacity of water, which is 4186 J/(kg°C), we can calculate the heat required as:
Q2 = m * c * ΔT = 0.0135 kg * 4186 J/(kg°C) * (100°C - 50°C) = 2832.45 J
The total heat removed is the sum of the heat required to change the phase of the steam and the heat required to cool the water:
Q = Q1 + Q2 = 30,510 J + 2832.45 J = 33,342.45 J =33.34245 kJ.
Therefore, 33,342.45 J of heat has been removed.
To learn about specific heat click:
https://brainly.com/question/11297584
#SPJ2
In Florida, most of the rocks that are underground are a type of soft, white rock called limestone. If limestone is underwater for a long period of time, it begins to dissolve. Which of these processes most likely causes this change?
A. chemical weathering
B. erosion
C. deposition
D. physical weathering
In Florida, most of the rocks that are underground are a type of soft, white rock called limestone. Long-term submergence in water causes limestone to disintegrate. These processes most likely causes this change is called Physical weathering. Hence, Option D is the correct answer.
What is Physical weathering?Physical weathering is also known as mechanical weathering. It is the weakening of rocks followed by the disintegration due to the physical or mechanical forces including the actions on the rocks by the abrasion, frost chattering, temperature fluctuations and the salt crystal growth. Eventually, after many cooling and heating events, the rocks cracks and break into smaller pieces.
This same mechanical process applies when water freezes and thaws in the cracks of a rock. The chemical composition of the rock, however, remains the same in the process. In Florida, most of the rocks that are underground are a type of soft, white rock called limestone. Long-term submergence in water causes limestone to disintegrate.
These processes most likely causes this change is called Physical weathering. Hence, Option D is the correct answer.
To know more about limestone,
brainly.com/question/15148363
#SPJ2
PLEASE HELP I WILL GIVE BRAINLYEST!!
Look at the world map shown below.
The picture shows the world map with a horizontal line labeled 'Equator' running across the middle of the map. A dotted line is shown slightly above the equator and parallel to it. This line is labeled 'Tropic of Cancer'. A dotted line is shown slightly below the equator and parallel to it. This line is labeled 'Tropic of Capricorn'. Florida is labeled on the left just above the Tropic of Cancer and Russia is labeled on the right closer to the north pole.
Public Domain
Which statement accurately describes the distribution of sunlight for the regions labeled? (3 points)
Group of answer choices
Florida has shorter seasons because it is more towards the west of the globe.
Russia has a greater number of longitudinal lines, which causes greater temperature differences.
Florida is situated closer to the Tropic of Cancer, which receives more constant and direct rays of the sun.
Russia is situated closer to the North Pole, which is tilted more towards the sun.
Answer:
Florida is situated closer to the Tropic of Cancer, which receives more constant and direct rays of the sun.
Explanation:
Took the test got it right C
A 2.00 kg ball is thrown upward at some unknown angle from the top of a 20.0 m high building. If the initial magnitude of the velocity of the ball is 20.0 m/s. What is the magnitude of the
FINAL VELOCITY when it strikes the ground? (Note: Ignore air resistance.)
Answer: 28.1
Explanation:
The total energy of the ball is the sum of its kinetic and potential energy. It is equal to 792 J. Then, the final velocity of ball when its strikes the ground is 28.1 m/s.
What is kinetic energy?Kinetic energy of an object is the energy gained by its motion whereas, potential energy is stored on the object when the object is at rest.
The total mechanical energy of the ball = Ke + Pe
given, mass of the ball = 2 Kg
height h= 20 m
initial velocity = 20 m/s
Then total energy = 1/2 mv² + mgh = 2 kg [(1/2(20 m/s)² + 9.8 m/s² ×20 m ] = 792 J.
The final velocity Vf = √(2E/m) =√(2×792 J/m)/2 Kg = 28.1 m/s
Therefore, the final velocity of the ball will be 28.1 m/s.
Find more on kinetic energy:
https://brainly.com/question/11749818
#SPJ5
True or false
John Watson worked with patients on analyzing their dreams
Answer:
true
Explanation:
Answer:its true i think im sorry if you get wrong
Explanation:
A tornado moving cross a street with a force of 600 N pushes a trailer a distance of 25 m.
How much work was performed in the process?
Answer:
W = 15,000 Joule
Explanation:
Mechanical Work
Mechanical work is the amount of energy transferred by a force. It's a scalar quantity, with SI units of joules.
If both the force and displacement are parallel, then we can use the scalar formula:
W=F.s
Where
F =Magnitude of the force
s = magnitude of the displacement
The tornado moved a trailer with a force of F=600 N for a distance of s=25 m. The work done was:
W = 600 N * 25 m
W = 15,000 Joule
A new Chevy truck comes out on the market. In an advertisement it says that it has a faster engine that Ford’s new truck. If this this statement is true, then it means that both engines do the same amount of ______________________ but different amount of _____________________.
work, power
power, work
not enough information is given
Which situations will NOT increase the reactions rate of most chemical reactions?
A) an increase in temperature
B) grind up the solute to increase surface area before mixing
C) by increasing the pressure in which the reaction takes place
D) decreasing the concentrations of the substances in the reaction
Answer:
D
Explanation:
Increasing temperature or pressure some times make the condition favorable to the reaction. Similarly increasing surface area of reacting mixture also helps to increase the reaction rate.
What is reaction rate ?The rate of a reaction is the rate of decrease in concentration of reactant or the rate of increase in concentration of the products. The rate of a reaction depends on several factors such as temperature, pressure, surface area etc.
Fir an endothermic reaction, as the temperature increases, reaction rate increases. Similarly, as the pressure increases, the reaction in which the number of moles of gaseous reactants is higher than that in products, rate increases.
The concentration of reactants must be sufficient for the reaction and decreasing the concentration of reactants does not favor an increase in reaction rate. Hence, option D is correct.
Find more on reaction rate :
https://brainly.com/question/8592296
#SPJ2
According to O*NET, what are common work styles needed by Chefs and Head Cooks? Select four options.
dependability
fitness
stress tolerance
leadership
common sense
attention to detail
The answer is 1, 3, 4, and 6; I just did the question on Edg and I thought that it would need to be posted on here to help others
Answer:
1-3-4-6
Explanation:
not taking the mans answer but just posting it here for people to see it clearly if brushed over on his.
What is the independent variable?
Diameter
Circumference
Answer:
Diameter
Explanation:
I know that circumference is dependent, so diameter has to be independent
The circumference is dependent, so diameter has to be independent.
What are independent variables?Even though everything can be almost always related to its reason, when we talk about two related things, there might happen that one of those things is dependent on other.
If a variable is taking its values independently of any visible direct cause, then that variable is called independent variable.
Diameter is the line from one point in the circle to the other point through the center of the circle.
The circumference of the circle that has a radius of r is the product of diameter to the pie value.
The circumference is dependent, so diameter has to be independent.
Learn more about independent variable;
https://brainly.com/question/1479694
#SPJ2
There are several ways to model a compound. One type of model is shown.
What is the chemical formula for the molecule represented by the model?
CHO
C4H9O2
C4H8O
C3H8O2
Answer:
What is the chemical formula for the molecule represented by the model?
[tex] →CHO\\ →C_4H_9O_2✓ \\→C_4H_8O \\ →C_3H_8O_2[/tex]
2) C4H9O2 is the right answer.A closed cylindrical tank of radius 3.5 m and height 2m is made from
a sheet of metal. How much sheet of metal is required ?
Explanation:
Total surface area of cylinder:
[tex]2\pi \times r(h + r) \\ 2 \times \pi \times 3.5(3.5 + 2) \\ 2\pi \times 19.25 = 120.951317 \\ 120.95 \: {cm}^{2} [/tex]
sheet of metal required = 120.95 cm^2
Explanation:
Answer:
Given :-
A closed cylindrical tank of radius 3.5 m and height 2 m is made from a sheet of metal.
To Find :-
How much sheet of metal is required.
Formula Used :-
[tex]{\red{\boxed{\large{\bold{T.S.A\: of\: cylinder\: =\: 2{\pi}r(r + h)}}}}}[/tex]
where,
r = Radius
h = Height
Solution :-
Given :
Radius = 3.5 m
Height = 2 m
According to the question by using the formula we get,
⇒ [tex]\sf T.S.A =\: 2 \times \dfrac{22}{7} \times 3.5(3.5 + 2)[/tex]
⇒ [tex]\sf T.S.A =\: 2 \times \dfrac{22}{7} \times 3.5(5.5)[/tex]
⇒ [tex]\sf T.S.A =\: 2 \times \dfrac{22}{7} \times 3.5 \times 5.5T.S.A=2×722×3.5×5.5
⇒ \sf T.S.A =\: 2 \times \dfrac{22}{7} \times 19.25[/tex]
⇒ [tex]\sf T.S.A =\: 2 \times 60.5[/tex]
➠ [tex]\sf\bold{\purple{T.S.A =\: 121\: {m}^{2}}}[/tex]
∴ 121 m² of sheet of metal is required.