Explanation:
weight= mass* 9.8N
100 kg mass weighs about 980 Newtons on Earth.
There are 122.6L of argon gas in a tank. How many moles is this?
A)
2.76mols
B)
3.25mols
09
1.56mols
D)
5.5mols
There are 5.5 moles of Argon gas in tank
Further explanationGiven
122.6 liters of Argon gas
Required
The number of moles
Solution
Assume at STP
Conditions at T 0 ° C and P 1 atm are stated by STP (Standard Temperature and Pressure). At STP, Vm is 22.4 liters / mol.
So for 122.6 L :
= 122.6 L : 22.4 L
= 5.47 moles ≈ 5.5 moles
How do the two desalination processes differ from the atmospheric water generator in terms of where the processes can be used?
Answer:
Water Desalination Processes. Water desalination processes separate dissolved salts and other minerals from water. Feedwater sources may include brackish, seawater, wells, surface (rivers and streams), wastewater, and industrial feed and process waters. Membrane separation requires driving forces including pressure (applied and vapor)
Explanation:
Salinized water cannot be consumed by humans, but it can be converted into freshwater, which has a variety of purposes. Desalination is the procedure, and it is being employed increasingly frequently all over the world to supply people with the freshwater they require.
What is desalination process?Desalination is the procedure used to remove the dissolved mineral salts from water. Currently, one of the most popular methods for obtaining fresh water for use in agriculture or human consumption when applied to seawater.
When seawater evaporation occurs, salt is left behind, and clouds are formed, which eventually result in rain. Da Vinci realised that it was easy to obtain using a still. Aristotle had observed that seawater would evaporate and condense into fresh water.
Seawater desalination was mostly utilised on ships and submarines over the next centuries to supply the crew with fresh water during lengthy voyages. Nevertheless, this method was not widely accessible until the industrial revolution and, more specifically, until the creation of desalination facilities.
To know more about desalination, visit;
https://brainly.com/question/31182435
#SPJ3
What is salinity? (giving you 30 points if you answer it and I give brainlist)
Question 1 options:
a liquid mixture in which the smaller component (solute) is distributed evenly through the major component (solvent)
The concentration of dissolved salt in a liquid
to become incorporated with a liquid in forming a solution
the total amount of salt dissolved in the sea
Answer:
D
Explanation:
Salinity is the saltiness or amount of salt dissolved in a body of water
Answer:
its b trust me i got it right
Explanation:
is melting plastic adding energy?
Answer:
Answer: Plastics, in particular, contain mainly carbon and hydrogen, with similar energy content to conventional fuels such as diesel. ... It's possible to convert all plastics directly into useful forms of energy and chemicals for industry, using a process called “cold plasma pyrolysis”.
Explanation:
How many atoms are in 5.00g of carbon
Question 1 options:
3.62 x 1025 atoms C
2.51 x 1023 atoms C
2.51 x 1024 molecules C
3.62x 1023 atoms C
Answer:
2.51 x 1023 atoms C
Explanation:
MW C = 12.011
5g x (1mol/12.011g) =0.416 mol
0.416 mol x (6.022x10^23) = 2.51 x 1023 atoms C
A bottle of shampoo is shaped like a right cylinder. The cylinder is six inches high with a radius
of 0.9 inches. One cubic inch is the same as 16.4 milliliters. What is the capacity of the bottle in
milliliters? Round to the nearest whole number. Use the following formula to help you decide:
Vegy = 17p• where Vcy is the volume of a right cylinder, ne is about 3.14, ris the radius
of the base, and h is the height of the cylinder
A 250 ml
B 200 ml
C 150 ml
D 100 ml
Answer:
A) 250 ml
Explanation:
Vcyl= π • r2 • h -----> Vcyl= π· 0.9^2 · 6= 15.2681402964464 x 16.4 millimetres = 250.3975008617209 rounded off to 250 millimetres :)
The transfer of nitrogen from the atmosphere to the soil, to living things, and back to the atmosphere is...
a
The water cycle
b
evaporation
c
The Nitrogen Cycle
d
Denitrification
Answer:
c
Explanation:
please give me brainliest
PLs help mweee Ill mark brainliest
the 3rd one is the answer
how many vitamin c tablets is 250mg? (i’ll give brainliest)
If you need 2.5 moles of Rb2Cr7, how many grams do you need?
Answer:
0
Explanation:
What process is shown by letter A in the diagram
Answer:
21
Explanation:
2 + 2 = 21
What would be a likely climatic outcome of rising ocean temperatures?
A. Ocean current patterns would be affected
B. The ocean wouldn't be able to store as much additional heat, thereby increasing land surface temperatures
C. Regional and/or global land surface temperatures would also be affected
D. All of the above
Which best explains why fungi are often called natural recyclers?
They provide a continuous food resource for many other organisms.
They break down rotting materials and return nutrients to the soil.
They take in large amounts of carbon dioxide, helping to clean the air.
O They are found in nature and have many different practical uses,
They break down rotting materials and return nutrients to the soil.
( They don't do photosynthesis since they are much different from plants)
Answer:
B
Explanation:
Enzymes are catalysts in living things, including in the molds and bacteria that cause the spoiling reactions that decompose food. Use your knowledge of reaction rates to explain why food doesn’t rot as fast when it is covered and refrigerated. For full credit identify two different factors and explain how they are slowing down the reaction.
I already have that the cold temperature will slow down the reaction, and I'm sure the covering has something to do with it, but I'm not sure what the factor could be. I think my answer has to be one of the factors we learned in class (which are catalyst, concentration, surface area, and temperature).
Answer: Discover ZEISS Solutions
Investigate soft materials like polymers, catalysts, coatings and chemicals to gain a better understanding of their properties. Analyze surface topography, chemical composition, tensile deformation and fracture patterns. Scroll down this page and discover microscopy characterization techniques and solutions from ZEISS enabling you to perform soft materials research in your lab efficiently.
Answer: Discover ZEISS Solutions
Investigate soft materials like polymers, catalysts, coatings, and chemicals to gain a better understanding of their properties. Analyze surface topography, chemical composition, tensile deformation, and fracture patterns. Scroll down this page and discover microscopy characterization techniques and solutions from ZEISS enabling you to perform soft materials research in your lab efficiently.
Which is an example of kinetic friction?
friction between a car’s windshield and the air as you drive into the wind
friction between a sticky note and the page of a book as it marks your place
friction between your shoes and the ground when you stand still
friction between your skin and a pencil as it rests in your palm
Answer: friction between a car's windshield and the air as you drive into the wind.
Explanation: Hope this helps :)
Which of the following statements about salinity is true?
Question 1 options:
Ocean water near rivers has a lower salinity.
Ocean water near areas with low evaporation has higher salinity.
Ocean water in regions with high levels of precipitation has higher salinity.
Ocean water in areas with high humidity has a higher salinity.
Answer:
the answer is A
Explanation:
I took the test
Salinity of water is the total concentration of the salts present in unit volume of water. Ocean water in regions with high levels of precipitation has higher salinity. Hence option c is correct.
What is salinity ?The salinity of sea water is expressed as a salt (in g) to liter of water ratio. Each liter of sea water contains around 35 grams of dissolved salts. It is spelled 35. The usual range of ocean salinity is 33-37 g/L.
There is a lot of rain in some places of the ocean. Freshwater poured to the surface dilutes the seawater, reduces salinity, and hence makes the seawater less dense. Near land, where rivers provide freshwater, seawater may be less saline.
The seawater near Antarctica has a low salinity of little about 34 ppt, and it is as low as 30 ppt in some spots around the Arctic. Regions where, the precipitation is higher have higher salinity in oceans.
Find more on salinity :
https://brainly.com/question/14575146
#SPJ6
what is the advantage of highly diverse ecosystem
Answer:
Biodiversity boosts ecosystem productivity where each species, no matter how small, all have an important role to play. For example, A larger number of plant species means a greater variety of crops. Greater species diversity ensures natural sustainability for all life forms
Explanation:
I need help with this one question
Answer:
colder
Explanation:
For the balanced equation shown below, if the reaction theoretically
should produce 7.99g CaO but experimentally produces 6.81 grams of
CaO, what is the percent yield?
CaCO3---->CaO+CO2
85.23%
0 14.77%
54.41%
O 117.33%
Answer:
Percent yield = 85.23%
Explanation:
Given data:
Theoretical yield = 7.99 g
Actual yield = 6.81 g
Percent yield of CaO = ?
Solution:
Formula:
Percent yield = ( actual yield / theoretical yield ) × 100
by putting values,
Percent yield = (6.81 g/ 7.99 g) × 100
Percent yield = 0.8523× 100
Percent yield = 85.23%
Most meteors that fall into the Earth's atmosphere burn up before reaching
the ground. Why is this?
how much energy was added to the ice between point a and point d?
Answer: 26kj
Explanation:
Just took the test and got it right :D
wich atom contains exactly 15 protons
Answer:
phosphorus
Explanation:
15 is the atomic number, so you know phosphorus has 15 protons.
What are 3 similarities between physical changes and chemical changes
Answer:
Heat change is involved in both process.
II. Both result in change of state of matter
Explanation:
Physical change substance involves the alteration of physical state of a substance. Chemical change substance involves the alteration of the chemical composition of the substance
Chemical properties describe matter based on its ability to change into___
A. A new substance
B. The same thing
C. Water
D. A powder
Answer:
A. A new substance
Explanation:
sorry if its wrong if its right your welcome <3
Identify a human activity that impacts the land negativaly. Then describe a positive action that can help reduce the effects caused by the activity
Answer:
Pollution
•The number of trips one takes in a car should be reduced.
•Reduce or eliminate fireplace and wood stove use.
•Burning leaves, trash, and other materials should be avoided.
•Using gas-powered lawn and garden equipment should also be avoided.
In an ecosystem, pollution is a human activity that impacts the land negatively.Minimum use of vehicles and emission of smoke can help reduce the effects caused by the activity.
What is an ecosystem?An ecosystem is defined as a system which comprises of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through means of nutrient cycles and flow of energy.
Energy enters the ecosystem through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the ecosystem .Living organisms also influence the quantity of biomass which is present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.
Learn more about ecosystem,here:
https://brainly.com/question/13979184
#SPJ2
Which statements accurately describe volume? Check all that apply. Volume is a physical property of an object. Volume is measured using a balance. The volume of a solid changes with the shape of the container. One unit of volume is the milliliter. Liquids and solids have constant volumes
Answer:
Liquids and solids have constant volumes
Explanation:
I believe this is the most correct statement
Answer:
Volume is a physical property of an object.
One unit of volume is the milliliter.
Liquids and solids have constant volumes.
Hope this helps <3
Explanation:
Which graph above shows an object’s acceleration?
a or b
Why did you choose that graph in question above (explain why)
Answer:
A i just did it. And yes i do go to k12
Explanation:
1 Which of the following is a true statement about work?
A It measures how quickly an object accelerates incorrect answer
B It measures how much effort is applied over a certain distance incorrect answer
C It measures the change in an object's rate of speed incorrect answer
D It measures how much time it takes to move a massive object incorrect answer
Without a picture I can't answer
Properties that depend on the concentration of a solute in a solution but not on the identity of the solute are _________ properties.
Answer:
Colligative properties
Explanation:
Colligative properties are those properties of a solution that depend only on the concentration of solute molecules or solute ions present in the solution but not on the identity of the solute.
The following are examples of colligative properties; vapor pressure lowering, boiling point elevation, freezing point depression, and osmotic pressure.
Colligative properties depend on the nature of the solvent and on the solution concentration but not on the identity of the solute.
Hydrogen atoms fuse together to form helium atoms. This releases a huge amount of energy in the form of _______ and ______. (called Nuclear fusion)
Answer:
Hydrogen atoms fuse together to form helium atoms. This releases a huge amount of energy in the form of Kinetic energy of the alpha particle and Electromagnetic radiation.
Explanation:
Nuclear Fusion is the Nuclear process in which the energy is produced when two lighter elements are collided together which are having some kinetic energy in them after that the two lighter nuclei will fuse together into a single heavier nuclei. This is opposite to what happens in Fission process in which the breaking up of atomic specie happens.
Both Nuclear Fission and Nuclear fission occurs with the release of massive amount of energy.
There are conditions for nuclear fusion to happens like, it requires 100 million's kelvin of temperature, also fusion will occur when the pressure is very high because increased pressure will result into squeezing of the atomic specie and hence they will fuse.
When the Hydrogen atom fuse together to form helium atoms. This release a huge amount of energy in the form of Kinetic energy of the alpha particle and Electromagnetic radiation.