The Venmo diagram compares protons with electrons. Which shared property belongs in the region marked B?

Answer:

1.70 L

Explanation:

From the question given above, the following data were obtained:

Pressure (P) = constant = 1.2 atm

Initial volume (V1) = 1.25 L

Initial temperature (T1) = 293 K

Final temperature (T2) = 398 K

Final volume (V2) =?

Since the pressure is constant, the gas is obeying Charles' law. Thus, we can obtain the new volume (V2) of the gas by applying the Charles' equation as shown below:

V1/T1 = V2/T2

1.25 / 293 = V2 /398

Cross multiply

293 × V2 = 1.25 × 398

293 × V2 = 497.5

Divide both side by 293

V2 = 497.5 / 293

V2 = 1.70 L

Therefore, the new volume of the gas is 1.70 L.

Answer:

The four main categories of mineral formation are: (1) igneous, or magmatic, in which minerals crystallize from a melt, (2) sedimentary, in which minerals are the result of sedimentation, a process whose raw materials are particles from other rocks that have undergone weathering or erosion, (3) metamorphic, in which new minerals form at the expense of earlier ones owing to the effects of changing—usually increasing—temperature or pressure or both on some existing rock type, and (4) hydrothermal, in which minerals are chemically precipitated from hot solutions within Earth.

The mineral can be formed from volcanic gases, oxidation, crystallization from magma, sediment formation, or deposition from a saline fluid.

A rock can be described as a collection of minerals. A rock that becomes so hot it melts and many minerals come out in liquids that are hot enough to melt rocks.

Magma can be defined as a melted rock inside Earth, a molten mixture of substances that can be hot to more than 1,000°C. When the magma cools slowly inside the earth, which provides mineral crystals time to grow large enough.

Granite is a rock that produces from slowly cooled magma, consisting of the minerals quartz, plagioclase feldspar which is shiny white, pink potassium feldspar, and black biotite.

When magma will erupt onto the surface of the Earth, it is known as lava. Lava cools more rapidly than magma when it is below the surface and mineral crystals do not have time to form. But the chemical composition remains the same as if the magma cooled slowly.

The mineral can be formed through hydrothermal processes, weathering, and metamorphic and igneous environments.

Learn more about minerals, here:

https://brainly.com/question/1333886

#SPJ2

This quantity = 0.298 nanograms(ng)

Mass is one of the principal quantities, which is related to the matter in the object

The main mass unit consists of 7 units of other than other units of mass such as quintals, tons, pounds, ounces:

Kilogram, kg

Hectogram, hg

Decagram, dag

gram, g

Desigram, with

centigram, cg

milligram, mg

Each unit descends then multiplied by 10, and if one unit increases then divided by 10

Conversion of other mass units:

10⁻³ g ⇒mg-milligrams

10³ g ⇒kg-kilograms

10⁻⁶ g ⇒µg-micrograms (mcg)

10⁶ g ⇒Mg-megagrams (tons)

10⁻⁹ g ⇒ng-nanograms

10⁹ g ⇒Gg-gigagram

10⁻¹² g ⇒pg-pikogram

2.98 x 10⁻¹⁰ g to nanograms(ng)

[tex]\tt 2.98\times 10^{-10}\times 10^9=0.298~ng[/tex]

Answer:

167 mL.

Explanation:

We'll begin by calculating the number of moles in 45 g of aluminum (Al). This can be obtained as follow:

Mass of Al = 45 g

Molar mass of Al = 27 g/mol

Mole of Al =?

Mole = mass /Molar mass

Mole of Al = 45/27

Mole of Al = 1.67 moles

Next, the balanced equation for the reaction. This is given below:

2Al + 3H2SO4 → Al2(SO4)3 + 3H2

From the balanced equation above,

2 moles of Al reacted with 3 moles of H2SO4.

Next, we shall determine the number of mole of H2SO4 needed to react with 45 g (i.e 1.67 moles) of Al. This can be obtained as:

From the balanced equation above,

2 moles of Al reacted with 3 moles of H2SO4.

Therefore, 1.67 moles of Al will react with = (1.67 × 3)/2 = 2.505 moles of H2SO4.

Thus 2.505 moles of H2SO4 is needed for the reaction.

Next, we shall determine the volume of H2SO4 needed for the reaction. This can be obtained as follow:

Molarity of H2SO4 = 15.0 M

Mole of H2SO4 = 2.505 moles

Volume =?

Molarity = mole /Volume

15 = 2.505 / volume

Cross multiply

15 × volume = 2.505

Divide both side by 15

Volume = 2.505/15

Volume = 0.167 L

Finally, we shall convert 0.167 L to mL. This can be obtained as follow:

1 L = 1000 mL

Therefore,

0.167 L = 0.167 L × 1000 mL / 1 L

0.167 L = 167 mL

Thus, 0.167 L is equivalent to 167 mL.

Therefore, 167 mL H2SO4 is needed for the reaction.

Answer:

2-5

Explanation:

I just did it.

The oxidation numbers of the atoms in this reaction are 0 for Mg(s) and H in H₂, -1 for Cl in HCl, +1 for H in HCl and +2 for Mg in MgCl₂

An oxidation number is a number assigned to atoms in molecules to show the general distribution of the electrons.

Oxidation state or number helps us describe the transfer of electrons.

The oxidation number/state is also used to determine the changes that occur in redox reactions.

Overall, the oxidation number of an atom in a molecule is the charge that the atom would have if all polar covalent and ionic bonds resulted in a complete transfer of electrons from the less electronegative atom to the more electronegative one.

Therefore, The oxidation numbers of the atoms in this reaction are 0 for Mg(s) and H in H₂, -1 for Cl in HCl, +1 for H in HCl and +2 for Mg in MgCl₂

Learn more about Oxidation number, here:

https://brainly.com/question/29263066

#SPJ2

Answer:

B.

Explanation:

i think its B

Answer:

Trioxocarbonate (iv) are salts derived from trioxocarbonate (iv) acid when it reacts with metals and metallic oxides. All trioxocarbonate (iv) salts of Sodium (Na), Potassium (K) and Ammonium(NH4+) are soluble while all others are insoluble.

Answer:

A

Explanation:

its A

facts o.o

Nuclear power plants pollute the environment and causes cancer in populations that use nuclear energy instead of traditional electricity. Hence option A is correct.

Nuclear power plant is defined as a particular kind of power plant that produces electricity by nuclear fission. Nuclear power plants use the heat generated by nuclear fission to transform water into steam in a controlled environment, which then powers generators to produce electricity.  Low-enriched uranium fuel is used in nuclear power plants to generate electricity through a process known as fission, which involves breaking uranium atoms in a nuclear reactor.

A clean energy source with no emissions is nuclear. It produces energy by fission, which is the splitting of uranium atoms to release energy. Without the toxic consequences that come from burning fossil fuels, electricity is produced using the heat from fission to produce steam, which turns a turbine.

Thus, nuclear power plants pollute the environment and causes cancer in populations that use nuclear energy instead of traditional electricity. Hence option A is correct.

To learn more about nuclear power plant, refer to the link below:

https://brainly.com/question/424603

#SPJ2

Answer:

Warm Water

Explanation:

In warm temperatures, cold-blooded animals are more active and can travel more quickly. This occurs because heat activated reactions provide energy to move muscles. In the absence of heat the animal becomes slow and sluggish. So they are usually inactive and rest when it is cold. As they do not need to feed much, they spend less time looking for food, so this life strategy works for them.

Brainliest?

Answer warm water Explanation:i have the same question

Answer:

1. molarity is = 0.1174

2. molarity is = 9.3

3. molarity is =0.009392

Explanation:

Q#1.

mass of sucrose is 14.07g

molar mass of sucrose is 342 3g/mol

so, 14.07x1/342.3 = 0.0411

now the volume is of water is 0.35

so, 0.0411/0.35 = 0.1174

Q#2.

concentration is 4.5

so, 4.5x1/1000= 0.0045

then, 0.0411/0.0045 = 9.13

Q#3.

M1M1=M2M2

molarity of the same sucrose is 0.1174

so, diluted in 40mL

and the volumetric flask is 500mL

so, 0.1174x40/500= 0.009392

Answer:

D. Thermal energy increases as the atoms and molecules in a system move more.

Explanation:

Thermal energy is a form of kinetic energy possessed by molecules of a system. The measure of this kinetic energy in an atom is called heat.

The average kinetic energy of a system is the temperature.

Answer: c. Water

Explanation:

Heat capacity can be defined as the physical property of the matter. It is the amount of heat which is required to produce a unit change in the temperature of the material.

Water requires more amount of energy per gram of the liquid to change its temperature as compare to any other liquid like ethanol and oil. Ethanol is a volatile liquid so it will require less heat to boil but heat capacity of oil will be more than the oil. The heat capacity of water will be the highest, and it will require more heat.

Answer:

two of the above

Explanation:

cK-12 Bond Polarity

Answer:

fehrf beviubeibchvbiscv kie v sjb rlj jsrubw

Explanation:

Answer:

############################

Explanation:

.

.

[tex]

\bold{\huge{\fbox{\color{red}{answer}}}}[/tex]

b competition .

hope it helps u

Answer: pH = 10

Explanation: First solve for pOH using the equation pOH=-log[OH-] = 4

Then plug the pOH in the equation, pH + pOH =14

then solve for pH. pH =14 - 4 = 10

Answer:

pH= 10

Explanation:

The pH really depends on what your solution is.

For example, if we are assuming that the concentration of 1.0M is of a strong monoprotic acid e.g. HCl, it would be safe to assume that almost all of the 1.0M acid has dissociated into its H+ ion, and its conjugate base. Thus, the pH can be determined by taking the negative log(to base 10), of the concentration.

Inversely, if the solution is of a strong base, the pOH value would be found, assuming the steps above. This pOH value can be used to infer a pH from the formula - pH + pOH = 14 then 14 - 4 = 10

Finally, come the weak acids/bases, which follow the rules above, except as they only partially dissociate, one needs its equilibrium constant to determine its extent of ionisation, to substitute into the negative log. This also is the case for the second, and higher order dissociation of polyprotic acids e.g. H2SO4.the answer is 10

Hope it helps

Answer:

Topographical

Explanation:

When it comes to questions such as this one, the thing that could help you the most is a dictionary. A dictionary is an alphabetically arranged listing of words that contains various information about those words, such as their definitions, examples, origin, pronunciation, etc.

The term the given definition refers to is topographical. Topography is the study of the forms and features of land surfaces. The topography of an area refers to its physical properties and terrain or their description (e.g. how they're shown on a map).

Answer: The number of molecules of gas the flask contains is [tex]0.674\times 10^{23}[/tex]

Explanation:

According to ideal gas equation:

[tex]PV=nRT[/tex]

P = pressure of gas = 1 atm   (STP)

V = Volume of gas = 2.50 L

n = number of moles  = ?

R = gas constant =[tex]0.0821Latm/Kmol[/tex]

T =temperature = 273K (STP)

[tex]n=\frac{PV}{RT}[/tex]

[tex]n=\frac{1atm\times 2.50L}{0.0821 L atm/K mol\times 273K}=0.112moles[/tex]

According to Avogadro's law:

1 mole of gas at STP contains =[tex]6.023\times 10^{23}[/tex] molecules

Thus 0.112moles of gas at STP contains = [tex]\frac{6.023\times 10^{23}}{1}\times 0.112=0.674\times 10^{23}[/tex] molecules

The number of molecules of gas the flask contains is [tex]0.674\times 10^{23}[/tex]

Answer:

C

Explanation:

Answer:

I think is A

Explanation:

Hope it helps

The final temperature = 36 °C

The balanced combustion reaction for C₆H₆

2C₆H₆(l)+15O₂(g)⇒ 12CO₂(g)+6H₂O(l)  +6542 kJ

MW C₆H₆ : 78.11 g/mol

mol C₆H₆ :

[tex]\tt \dfrac{8.5}{78.11}=0.109[/tex]

Heat released for 2 mol C₆H₆ =6542 kJ, so for 1 mol

[tex]\tt \dfrac{0.109}{2}\times 6542=356.539~kJ/mol[/tex]

Heat transferred to water :

Q=m.c.ΔT

[tex]\tt 356.539=5.691~kg\times 4.18~kj/kg^oC\times (t_2-21)\\\\t_2-21=15\rightarrow t_2=36^oC[/tex]

Answer:

Explanation:

The density of a substance can be found by using the formula

[tex]density = \frac{mass}{volume} \\ [/tex]

From the question we have

[tex]density = \frac{690}{750} = \frac{69}{75} = \frac{23}{25} \\ [/tex]

We have the final answer as

Hope this helps you

Answer:

0.45 g

Explanation:

Step 1: Given data

Step 2: Calculate the moles of methionine (n)

We will use the following expression.

n = C × V

n = 150 × 10⁻³ mol/L × 20 × 10⁻³ L

n = 3.0 × 10⁻³ mol

Step 3: Calculate the mass of methionine (m)

We will use the following expression.

m = n × M

m = 3.0 × 10⁻³ mol × 149.21 g/mol

m = 0.45 g

Answer:

Mass is conserverd

Explanation:

Any chemical reaction must follow the law of conservation of mass. Meaning that mass cannot be created nor destroyed. Since all chemical reactions must follow this law, no matter what reaction happens, mass is conserved.

Answer:

d

Explanation: