Answer:
Because the unit of area depends upon the other fundamental units.
Explanation:
Unit of Area = m^2
actual metre is the unit of length.
so metre × metre makes ?^2
Which symbol represents a type of radiation that has the same mass as an
electron and a positive charge?
Answer:
the answer is D
as an electron is composed of positive charges
Answer:
D.+1°e symbol represents a type of radiation that has the same mass as an electron and a positive charge.
Explanation:
it is 100% correct!
how does Newton's law of motion describe when and how objects move?
Answer:
Newton's laws of motion relate an object's motion to the forces acting on it.Newton's first law states that every object will remain at rest or in uniform motion in a straight line unless compelled to change its state by the action of an external force.
Explanation:
.
A sample of an ideal gas is contained at initial volume 34 L, temperature 450 K, and pressure 7.7 × 104 Pa. It then is allowed to expand to a volume of 40 L. To calculate the work involved in the expansion, which additional information, if any, must be known about the gas? Assume that known information includes the values of physical constants, such as the ideal-gas constant R.
A.the final pressure of the gas
B.The path of the change from initial to final conditions
C. the final temperature of the gas
Answer:
it have to be a
Explanation:
There are two sets of resistors joined in series in a circuit. Set 1 has two resistors of 10Ω and 40Ω in parallel combination. Set 2 has three resistors of 20 Ω, 30 Ω and 60 Ω in parallel combination. A potential difference of 12 V is applied across the combination.
[tex]\huge\boxed{\fcolorbox{black}{red}{ QUESTION}}[/tex]
There are two sets of resistors joined in series in a circuit. Set 1 has two resistors of 10Ω and 40Ω in parallel combination. Set 2 has three resistors of 20 Ω, 30 Ω and 60 Ω in parallel combination. A potential difference of 12 V is applied across the combination.
[tex] \orange{\underline{\huge{\bold{\textit{\green{\bf{GIVEN}}}}}}}[/tex]
Two set of Parallel resistors
Contains two resistors of --> 10Ω and 40Ω
Contains three resistors of --> 20 Ω, 30 Ω and 60Ω
Potential Difference Of 12 V
[tex]{\bold{\orange {To \: Find }}}[/tex]
Draw a circuit diagram to represent this arrangement Calculate
(a) the total resistance and
(b) the total current flowing in the circuit.
[tex] \huge\mathbb{\red A \pink{N}\purple{S} \blue{W} \orange{ER}}[/tex]
FOR DIAGRAM REFER ATTACHMENT!
[tex]{\bold{\green{\star{\red {Part \: 1:- The \: Total \: Resistance }}}}}[/tex]
First we calculate the total resistance of each parallel combination:-
FIRST SET Contains two resistors of 10Ω and 40Ω
so total resistance-->
[tex] \frac{1}{Rs1} = \frac{1}{R1} + \frac{1}{R2} \\ \\ \frac{1}{Rs1} = \frac{R1 + R2}{R1R2} \\ \\ \frac{1}{Rs1} = \frac{10 + 40}{400} \\ \\ \frac{1}{Rs1} = \frac{50}{400} \\ \\ \frac{1}{Rs1} = \frac{1}{8} \\ \\ Rs1 = 8 Ω[/tex]
SECOND SET Contains three resistors of 20 Ω, 30 Ω and 60Ω
so total resistance-->
[tex] \frac{1}{Rs2} = \frac{1}{R1} + \frac{1}{R2} + \frac{1}{R3} \\ \\ \frac{1}{Rs2} = \frac{R1 + R2 +R3}{R1R2R3} \\ \\ \frac{1}{Rs2} = \frac{3+ 2 + 1}{60} \\ \\ \frac{1}{Rs2} = \frac{6}{60} \\ \\ \frac{1}{Rs2} = \frac{1}{10} \\ \\ Rs2 = 10Ω[/tex]
Now by having Total Resistance of Set one and set two we can add them by series formula.
[tex]R = Rs1 + Rs2 \\ R = 8 + 10 = 18 \: Ω[/tex]
[tex]{\bold{\green{\star{\orange{Part \: 2:- The \: Total \: Current \: Flowing \: In \: The \: Circuit. }}}}}[/tex]
Total Resistance of the circuit = 18 Ω
Potential Difference Of the circuit = 12 V
So Total current-->
[tex] V = IR \\ 12 = 18 \times I \\ \\ I = 0.66 \: A[/tex]
2.
A charge particle is moved through a potential difference of 154.5 V and experiences a
change of electric potential energy of 4.26 x 10-8 J. What is the charge of the particle?
Answer:
2.76×10⁻¹⁰ C
Explanation:
Applying,
V = W/q................... Equation 1
Where V = Electric Potential, E = Electric potential energy, q = charge.
make q the subject of the equation
q = W/V................ Equation 2
From the question,
Given: W = 4.26×10⁻⁸ J, V = 154.5 V
Substitute these values into equation 2
q = 4.26×10⁻⁸/154.5
q = 2.76×10⁻¹⁰ C
Numerical: A capacitor of 200 picofarad is charged to a potential difference of 100 volts. It's plates are then connected parallel to another capacitor them potential difference in this combination fall to 60 volts. What is the capacitance of second capacitor?
(Working of this solution)
Answer:
The capacitance of the other capacitor is 1333.3 pF.
Explanation:
C' = 200 pF, V' = 100 V, C'' , V''= 0
Common potential, V = 60 V
Use the formula of the common potential
[tex]V = \frac{C' V' + C'' + V''}{C'+ C''}\\\\60 = \frac{200\times 100 + 0}{200 + C''}\\\\1200+ 6 C''= 2000\\\\C'' = 1333.3 pF[/tex]
describe one example of light being refracted in the living room
Answer:
television
Explanation:
a television refracts light (the light bounces off of the screen
Answer:
Suppose you have a glass slab as a paper weight, if you keep it on the paper, dont you see something strange? The paper becomes elevated in the glase slab. Everyone sees a waterbottle or glass everyday, while seeing through it, does everything seem normal? Nope. That's refraction.
Explanation:
You must have seen a prism, right? It makes light split into the visible electromagnetic spectrum.
Q2. A cube of side 2 cm has a density of 6 g cm. What is the mass of the cube?
[tex]given \: the \: length \: of \: one \: side \: of \: a \: cube \: \\ = 2cm \\ so \: we \: know \: the \: volume \: of \: a \: cube \: = {side}^{3} \\ so \: the \: volume \: of \: the \: cube \: here \: = {2}^{3} {cm}^{3} = \: 8 {cm}^{3} \\ we \: know \: density \: of \: a \: substance \: = \: \frac{mass}{volume} \\so \: mass \: = density \times volume \\ density = 6 \frac{g}{ {cm}^{3} } \\ volume \: = 8 {cm}^{3} \\ so \: \: mass \: = (6 \times 8)( {cm}^{3} \times \frac{g}{ {cm}^{3} }) \\ 48gram \: (ans) [/tex]
HOPE IT HELPS
After finishing using free weights, the next step is to?
Answer:
g
Explanation:
bhhhhhhjjjhhuydszzzzzzzxz
A person ran westward for 1600 meters in 8 minutes. What was their speed?
Answer:
3.33 m/s
Explanation:
1600 divided by 8 comes out to 200, so supposing we're measuring the speed in terms of Meters Per Second, we would need to divide 200 by 60 to take account of the individual seconds as opposed to simply 200 meters per minute.
An iron rod and a copper rod of equal length are each held by hand at one end, with the other end in the flame from a Bunsen burner. The copper rod becomes too hot to hold much sooner than the iron rod. What does this information tell you about iron and copper?
Answer:
Iron has a higher heat capacity than copper
Explanation:
The heat capacity of a substance is defined as the amount of heat required to raise the temperature of an object by 1°C.
The higher the heat capacity of a substance, the longer the time it takes for the substance to become hot when heated.
Since the copper rod becomes too hot to hold much sooner than the iron rod, it means that iron has a higher heat capacity than copper.
Which element is found in group 16 and period 5
Answer:
Po (Polonium)
Explanation:
Which organism is structurally similar to this organism
Answer:
The correct answer is "Common Ancestry." Scientists notice structural similarities between fossils of a land animal and an aquatic organism. They know the similarities are not a result of the two organisms having to adapt to similar environments. The similarities are brought by the common ancestry of the two organisms.
Read more on Brainly - https://brainly.com/sf/question/1115688
Answer: middle one that looks like a bird
Explanation:
What is an impulse? (select all that apply)
J=Ft
change in momentum
V=m/a
a rash decision
Answer:
change in momentum
Explanation:
using newton's second law,
F = m ( v - u ) / t....
Ft = mv - mu
impulse is either Ft ( product of force applied and the time taken for its action )
or impulse is mv - mu ( change in momentum )
the magnificat of image produced by a concave lens is always less than 1. why?
Answer: Concave lens makes the virtual image. So the image distance turns to be negative which also cause the magnification to be negative.
What fraction of a wavelength of a standing wave pattern is between resonances in a closed end tube?
Answer:
[tex]25\%[/tex] of the wavelength is between resonances in a closed end tube.
Explanation:
In an one end closed tube, the fundamental resonance occurs when a node is created at the closed end and an antinode is created in the open end.
Thus, for fundamental resonance, the entire length of the tube encloses one-fourth of the wavelength of the standing wave.
The formula to calculate the percentage of the wavelength in a closed end tube is given by
[tex]f=\frac{L}{\lambda}\times100\%........................(1)[/tex]
Here, [tex]f[/tex] is the required percentage, [tex]L[/tex] is the length of the tube and [tex]\lambda[/tex] is the wavelength of the standing wave.
Substitute [tex]\frac{\lambda}{4}[/tex] for [tex]L[/tex] into equation (1) o calculate the required percentage.
[tex]f=\dfrac{\frac{\lambda}{4}}{\lambda}\times100\%\\~~~=25\%[/tex]
What is cultural discontinuity?
Answer:
Disconnections and discrepancies
between school-based norms and values and those of
some pupils, especially those from
nondominant cultures, are referred to
as cultural discontinuity.
☆-----------------------------☆
☆Hope it helps...
☆Have a great day!!!
How much power is consumed by the circuit above?
Power is dissipated, not consumed.
This circuit dissipates 4.5 watts.
NEED HELP
A 0.558 kg block of copper at 117°C comes in contact with a 1.11 kg block of aluminum at 15.8°C. What is their equilibrium temperature?
there it is fella tried on ma own consciousness
Answer:
33.8
Explanation:
(Acellus)
What type of glass absorbs light and does not allow light to pass through it?
reflective
transparent
opaque
refractive
opaque glass does not allow light to pass through it.
Explain how a truss bridge is so stable.
Answer:
Truss bridge, bridge with its load-bearing structures composed of a series of wooden or metal triangles, known as trusses. Given that a triangle cannot be distorted by stress, a truss gives a stable form capable of supporting considerable external loads over a large span.
Explanation:
Load-bearing capacity of truss bridges is huge due to the structure of interconnecting triangles. The structure effectively manages both compression and tension by spreading the load from the roadway throughout its intricate structure
What is the total resistance of a 6 ohm and a 8 ohm resistor connected in series?
(1 Point)
Answer:
Total Resistance in circuit is Fourteen Ohms (14 Ω).
Explanation:
How do we know, if the resistors are connected in series, the total resistance is the sum of all the resistors.
(Important: The total resistance can only be added just when the resistors are connected in series)
Then, total resistance (TR ) is the sum of all resistors (T1 + T2, in this case)
TR = T1 + T2
According to problem data, we have:
TR = 8 Ω + 6 Ω
TR = 14 Ω
║Sincerely, ChizuruChan║
The source of electromagnetic waves is _____.
vibrating atoms
magnetic fields
electric fields
vibrating electric charges
Answer:
D. Electric Charges
How to write about Bar graph in english
Answer:
A bar chart is orientated horizontally, whereas a column chart is arranged vertically. Sometimes “bar chart” refers to both forms. These types of charts are usually used for comparison purposes (unlike line charts, which describe change).
if a statement is true, select true. if it's false, select false.
3 is false 2 is true and the rest true
Answer;
True, False, False, True, True
If each metal is hit with light at a minimum wavelength, can I vary the intensity of the light to start emitting electrons?
It is true that the metal will begin to emit electrons at varied speeds depending on the intensity of the light when it is struck at a minimal wavelength.
What is meant by wavelength?When a waveform signal is propagated in space or over a wire, the wavelength is the separation between two identical locations (adjacent crests) in the adjacent cycles.
If you are employing light with a high enough frequency, the number of electrons ejected grows as the light source's brightness rises.
The velocity of the expelled electrons increases as the frequency is raised above the threshold.
Thus, the metal will begin to emit electrons at varied speeds depending on the intensity of the light when it is struck at a minimal wavelength.
To learn more about Wavelength, refer to the below link:
https://brainly.com/question/1263539
# SPJ2
A hydraulic jack is used to lift a car by applying a force of 120N at the pump piston,if the area of the ram and pump piston are 100cm squared and 1m squared respectively
Complete question:
A hydraulic jack is used to lift a car by applying a force of 120N at the pump piston, if the area of the ram and pump piston are 100cm squared and 1m squared respectively. What is the weight of the car?
Answer:
the weight of the car is 1.2 N
Explanation:
Given;
applied force, F₁ = 120 N
area of the effort (pump), A₁ = 1 m²
area of the load (ram), A₂ = 100 cm² = 1 x 10⁻² m²
let the weight of the car = F₂
The applied pressure is constant and the following equations can be used to calculate the weight of the car.
[tex]P = \frac{F_1}{A_1} = \frac{F_2}{A_2} \\\\F_2 = \frac{F_1 \times A_2}{A_1} \\\\F_2 = \frac{120 \times (1\times 10^{-2})}{1} \\\\F_2 = 1.2 \ N[/tex]
Therefore, the weight of the car is 1.2 N
Next
Comparative Anatomy: Mastery Test
Subm
Which organism is structurally similar to this organism?
Answer:
maybe it is the first one
power of a crane is 25000 watt calculate the time required by it to lift a load of 6000 kg up tp the height of 20 m
define fundamental unit ? write its two example.
the International System of Units, the fundamental units are: The meter (symbol: m), used to measure length. The kilogram (symbol: kg), used to measure mass. The second (symbol: s), used to measure time. The ampere (symbol: A), used to measure electric current.