The two dry sand samples are examined by changing one parameter. The independent variable, the one that is intentionally manipulated between the two samples, is the. Besides the amount of material, there is also another variable that is manipulated within each of the two mass groups and represented as three types. This independent variable is the. In each case, the dependent variable, the one that you measure the response in, is the.

The volume of 3.5 mol of an ideal gas at a pressure of 3 atm and at temperature of 0°C is 26.227 L

The volume of the ideal gas can be solved using the ideal gas equation of state:

PV=nRT

Where

p is the gas pressure

V is its volume

n is the number of moles

R is the gas constant

T is the absolute temperature of the gas

For the ideal gas of this problem:

n = 3.5 mol (number of moles)

p = 3 atmospheres (pressure)

T = 0°C= 0+273°K =273 °K

R= the gas constant = 0.082Latm/mol °K

Solving for V gives the volume of the gas.

V= nRT

      P

V = 3.5 mol x 0.082Latm/mol °K x 273 °K

                              3 atm

V =  26.227 L

learn more about gas ideal at https://brainly.com/question/15479404

#SPJ4

The volume of H₂ gas required with an excess of nitrogen at STP to prepare 45.0 g of ammonia is 88.7 L.

45 gm ammonia is to be prepared.

The reaction to produce NH₃ is as below-

N₂ ₊ 3H₂ → 2NH₃

First let us calculate the number of moles

number of moles= mass/ molecular mass

number of moles= 45g/ 17 g/mol

number of moles= 2.6 mol

Since 2 moles of NH₃ is produced from 3 moles of H₂.

So, 1 mole of NH₃ will be produced from 1.5 moles of H₂

Hence, 2.6 moles of NH₃ will be produced from 1.5 x 2.6 moles of H₂

So NH₃ produced will be 3.9

Volume = number of moles x 22.4L

Volume= 3.9 x 22.4 L

Volume= 88.7 L

Hence, the volume of H₂ required is 88.7 L.

To learn more about STP refer- https://brainly.com/question/18914403

#SPJ4

The major product of the second stereochemistry reaction is alkyl iodide, which is formed from alcohol.

When an alkene is hydrated, it produces alcohol. When Asymmetric Alkenes are treated with water in the presence of acid, the Markovnikoff rule is followed, and the Hydrogen of the incoming reagent goes to the carbon with the most Hydrogen atoms. The reverse (Anti-Markovnikoff) reaction is carried out by carrying out the Hydroboration reaction. In this case, the incoming reagent's Hydrogen atom is directed to the carbon with the fewest stereochemistry Hydrogen atoms. Both -H and -OH add in sync in this reaction. The hydroboration reaction of cholestrol is depicted below. The image below depicts the products of the reaction for the first reaction scheme, which follows the sn2 mechanism and thus results in the inversion of the configurations.

To learn more about stereochemistry please click on below link

https://brainly.com/question/13266148

#SPJ4

The pH decreases and the ocean becomes more acidic as more co2 is absorbed into oceans.

Because of human-driven increased levels of carbon dioxide in the atmosphere, there is more CO2 dissolving into the ocean. The ocean's average pH is now around 8.1, which is basic (or alkaline), but as the ocean continues to absorb more CO2, the pH decreases and the ocean becomes more acidic.

What happens when co2 is absorbed in seawater?

Ocean acidification occurs when carbon dioxide (CO2) is absorbed rapidly into the ocean. It reacts with water molecules (H2O) to form carbonic acid (H2CO3). This compound then breaks down into a hydrogen ion (H+) and bicarbonate (HCO3-). These hydrogen ions decrease seawater pH.

What happens if there is more carbon in the ocean?

Excess carbon in the atmosphere warms the planet and helps plants on land grow more. Excess carbon in the ocean makes the water more acidic, putting marine life in danger.

What is ocean acidification?

As Carbon dioxide in the atmosphere increases, it sinks into the ocean and dissolves in water creating carbonic acid which is bad for marine organisms. the PH decreased in the ocean and the ocean water becomes more acidic.

Thus, oceans become more acidic.

To know more about ocean acidification:

https://brainly.com/question/7604502

#SPJ4

As can be seen, the valence shell of aluminum has three electrons. To achieve the electronic configuration of neon, aluminum can simply lose three electrons. So, the most stable oxidation state for it is +3.

Monoatomic ions always have an oxidation number equal to their associated net charge. Positive oxidation is present in the hydrogen atom (H). When this element is joined to another element that has a lower electronegativity than it, the oxidation number of the combined element is -1.

For simple ions, the charge of the ion is equal to its oxidation number. For instance, the sodium ion, Na+, has an oxidation number of 1, while the chlorine ion, Cl-, has an oxidation number of -1.

To know more about aluminum visit:

https://brainly.com/question/28830934

#SPJ1

For SN1 solvolysis of t-butyl chloride, the solvents from the fastest reaction will be water and the slowest reaction will be Acetic acid

The SN1 reaction is a substitution reaction in organic chemistry. The Hughes-Ingold symbol, which depicts how the reaction occurs, gave rise to its name. The letters "SN" stand for "nucleophilic substitution," and the number "1" denotes that the rate-determining step is unimolecular.

A chemical reaction known as solvolysis occurs when a solvent, such as water or alcohol, is used in excess and functions as one of the reagents. As a result, water, formic acid, methanol, and ethanol are the fastest.

Yes, solvolysis can continue the SN1 reaction. A nucleophilic substitution reaction with a unimolecular rate-determining step is known as the SN1 reaction. Carbocation-containing intermediates are produced during SN1 reactions.

Learn more about solvolysis:

https://brainly.com/question/29555642

#SPJ4

Answer: 35.7632

Explanation:

For SiS₂, silicon disulfide, the electron dot formula could be seen in the attached picture. The total nonbonding electron pairs in a SiS₂ molecule is: 4 pairs.

The electron dot formula, also known as the Lewis structure, is a representation of the total valence electrons of atoms within a molecule. By writing an electron dot formula, we can visualize the existence of valence electrons and whether they are within bonds or just stand as lone pairs.

The nonbonding electron or the lone pairs are electrons within an atom that are not forming a bond with the other atoms in a molecule. In the SiS₂ molecules, the 4 nonbonding pairs exist both in S atoms.

Learn more about bond order here https://brainly.com/question/9713842

#SPJ4

Typically, If these chemicals were present in methanol-acetone, the solvolysis process would proceed at the quickest to slowest relative rate. solvolytic reactions involve the replacement of one atom or group of atoms.

The solvents operate as or produce nucleophiles (atoms or groups of atoms with plenty of electrons), which displace an atom or group in the substrate molecule. The pace of solvolysis may be defined in terms of how easy carbocation formation. The carbocation in structure (I) that solvolysis results from methanol-acetonethe elimination of Br is an antiaromatic molecule, and it will be the least stable. When Br is removed from structure (II), a carbocation of methanol-acetonethe that results is an aromatic compound.

learn more about solvolysis here:

https://brainly.com/question/29672487

#SPJ4

The chemical reactions and their equilibrium constants for imidazole and imidazole hydrochloride are given below.

A chemical reaction is a process in which chemical bonds between atoms and molecules are broken and formed, resulting in the formation of new substances with distinct chemical properties.

Imidazole ([tex]\rm C_3H_4N_2[/tex]) is a weak base and can react with water to form the imidazole ion and hydronium ion. The equation for this reaction is:

[tex]\rm C_3H_4N_2 + H_2O \rightleftharpoons C_3H_4N_2H^+ + OH^-[/tex]

The equilibrium constant for this reaction is called the base dissociation constant ([tex]\rm K_b[/tex]) of imidazole.

[tex]\rm K_b = \dfrac { [C_3H_4N_2H^+][OH^-]} {[C_3H_4N_2]}[/tex]

Imidazole hydrochloride ([tex]\rm C_3H_4N_2HCl[/tex]) is a weak acid and can react with water to form the imidazole ion and hydronium ion.  The equation for this reaction is:

[tex]\rm C_3H_4N_2HCl + H_2O \rightleftharpoons C_3H_4N_2H^+ + Cl^- + H_2O[/tex]

The equilibrium constant for this reaction is called the acid dissociation constant ([tex]\rm K_a[/tex]) of imidazole hydrochloride.

[tex]\rm K_a = \dfrac {[C_3H_4N_2H^+][Cl^-] }{ [C_3H_4N_2HCl]}[/tex]

Therefore, the chemical reactions with their equilibrium constants for the given compound's imidazole and imidazole hydrochloride in aqueous solution are mentioned above.

Learn more about chemical reaction here:

https://brainly.com/question/29762834

#SPJ12

As a precipitating agent, potassium nitrate is utilized. Precipitation The analytical technique of gravimetry uses a precipitation process to separate ions from a solution. The chemical that is utilized to produce is precipitating agent.

The required element is converted into a substance (of known composition) using the precipitation quantitative chemical analysis method known as gravimetric analysis so that it may be removed from the sample and weighed. The following steps are commonly involved in gravimetric precipitation analysis:

(1) making a solution with an established sample weight;

(2) removing the wanted component;

(3) measuring the separated component's weight;

(4) using the observed weight of the separated material to calculate the quantity of the specified ingredient in the sample.

learn more about Gravimetric precipitation analysis here:

https://brainly.com/question/6163057

#SPJ4

8 mol NH3 X (5 mol O2 / 4 mol NH3) = 10 mol O2The stoichiometric ratio of the two reactants is used to mix them. If the reaction is successful, neither reactant will be left behind.

Knowing a product's mass and molar mass—the mass of one mole of the product—is necessary to compute the moles of a given substance. After that, you divide the product's mass by its molar mass.

Molar mass of NaOH = (23.0 + 16.0 + 1.0) g/mol = 40.0 g/mol

Molar mass of Ni(OH)₂ = (58.7 + 16.0×2 + 1.0×2) g/mol = 92.7 g/mol

Initial no. of moles of NaOH = (31.0 g) / (40.0 g/mol) = 0.775 mol

Initial no. of moles of Ni(NO₃)₂ = (1.00 mol/L) × (0.550 L) = 0.550 mol

Balanced equation for the reaction:

2NaOH(aq) + Ni(NO₃)₂(aq) → Ni(OH)₂(s) + 2NaNO₃(aq)

Mole ratio NaOH : Ni(NO₃)₂ : Ni(OH)₂ = 2 : 1 : 1

If NaOH completely reacts, Ni(NO₃)₂ needed = (0.775 mol) × (1/2) = 0.3875 mol < 0.550 mol

Hence, Ni(NO₃)₂ is in excess, and NaOH is the limiting reactant.

No. of moles of NaOH reacted = 0.775 mol

No. of moles of Ni(OH)₂ formed = (0.775 mol) × (1/2) = 0.3875 mol

Mass of Ni(OH)₂ formed = (0.3875 mol) × (92.7 g/mol) = 35.9 g

In a chemical equation, the substance or substances to the left of the arrow are referred to as reactants. A substance that is present when a chemical reaction first begins is known as a reactant. Products refer to the material or substances to the right of the arrow.

Learn more about molar mass here:

https://brainly.com/question/12127540

#SPJ4

0.2ml is required as 1 : 4 dilution to make 4ml of 1 : 80 dilution.  

Dilution is the addition of solvent, which decreases the concentration of the solute in the solution.

Concentration on the other hand, is the removal of solvent, which increases the concentration of the solute in the solution.

The volume of solution needed to make the solution can be calculated by the formula,

V1 x N1 = V2 x N2

4 ml of 1:80 diluted solution has to be made from 1:4 solution.

Applying these values in the above formula,

V1 x (1/4) = 4 x (1/80)

V1/4 = 1/20

V1 = 4/20

V1 = 0.2 ml

To know more about dilution and concentration click on https://brainly.com/question/24881505

#SPJ4

0.447 is the mole fraction of Nitrogen in this mixture.

mole fraction of nitrogen= moles of nitrogen/total moles

mole fraction of nitrogen=0.85/1.90

mole fraction of nitrogen=0.447

The product of the moles of a component and the total moles of the solution yields a mole fraction, which is a unit of concentration measurement. Because it is a ratio, mole fraction is a unitless statement. The sum of the components of the mole fraction of a solution is one. In a mixture of 1 mol benzene, 2 mol carbon tetrachloride, and 7 mol acetone, the mole fraction of the acetone is 0.7. This is computed by dividing the sum of the moles of acetone in the solution by the total number of moles of the solution's constituents:

To know more about mole fraction visit : https://brainly.com/question/8076655

#SPJ4

Steps 3, 4, 6 and 8 are the energetically favoured steps in a citric acid cycle, and in these steps, decarboxylation and Oxidative dehydrogenation reactions are taking place.

What is the Citric acid cycle?

The citric acid cycle, often referred to as the Krebs cycle or the TCA cycle is a sequence of chemical reactions that oxidize acetyl-CoA, which is obtained from carbs, lipids, and proteins, to release stored energy. Organisms that respire (as opposed to organisms that ferment) use the Krebs cycle to produce energy, either through anaerobic or aerobic respiration. The cycle additionally supplies the reducing agent NADH and precursors of a few amino acids that are needed in a variety of other processes.

What is Oxidative decarboxylation?

In the process of oxidative decarboxylation, a carbon group is removed as a result of oxidation processes, producing carbon dioxide. Many biological activities, like the citric acid cycle, depend on them. It is used three times in the citric acid cycle to produce CO2 and convert NAD+ to NADH. First, pyruvate is transformed into acetyl CoA by a complex of pyruvate dehydrogenases. The enzyme Isocitrate dehydrogenase is then used to convert isocitrate to ketoglutarate, and ketoglutarate dehydrogenase is then used to convert ketoglutarate to succinyl CoA.

Hence, in a citric acid cycle, the chemical reactions which are energetically favoured are oxidative decarboxylation and dehydrogenation.

To Know more about the Citric acid cycle, check out:

https://brainly.com/question/17089080

#SPJ4

Bombardment of uranium-238 with a deuteron (hydrogen-2) generates neptunium-237 and 3 neutrons.

Uranium-238 + 1H3 = Neptunium-237 + 3 neutrons

The process of nuclear fission involves the splitting of an atom's nucleus into two or more smaller nuclei. Even by the energetic standards of radioactive decay, the fission process releases a very high quantity of energy and frequently results in gamma photons.

Uranium-238 is converted into Uranium-239 by neutron capture, which then undergoes a quick conversion to Neptunium-239 by beta radiation. After about three days, beta radiation changes this neptunium into a new nucleus called plutonium-239. Like uranium-235, this radionuclide is fissile.

To know more about nuclear fission, click here,

brainly.com/question/3992688

#SPJ4

If the Earth didn't rotate, winds would travel either north or south due to differences in temperature and pressure. But since the Earth does rotate, the Coriolis effect deflects these winds to the right in the Northern Hemisphere and to the left in the Southern Hemisphere.

Circulating air is diverted to the right in the Northern Hemisphere and to the left in the Southern Hemisphere when the Earth revolves on its axis. The Coriolis effect is the name given to this deflection.

Air would simply flow directly from high-pressure areas to low-pressure regions if the Coriolis effect didn't exist. The Coriolis effect affects the world's wind patterns and determines the predominant south-westerlies in the UK.

Thus, option A is correct.

To learn more about coriolis effect, follow the link;

https://brainly.com/question/2478442

#SPJ1

that non-polar molecules will typically dissolve in non-polar solvents while polar molecules will typically dissolve well in polar solvents.

According to the adage "like dissolves like," polar and ionic chemicals will dissolve in any substance if it is polar. Only non-polar compounds can be dissolved in it if the solvent is non-polar. Hexane in benzene, for instance.

If the intermolecular interactions between the two components are similar, a substance will dissolve in a solvent; for instance, polar solutes will dissolve in polar solvents and non-polar solutes will dissolve in non-polar solvents, proving that "like dissolves like".

Learn more about non-polar here:

https://brainly.com/question/15173422

#SPJ4

The ideal gas constant, r, has a unit of (l atm/mol k) of 0.0821 l atm/ mol k.

The formula for the ideal gas constant is

PV = nRT

P = pressure

V=volume

n= number of moles,

R=ideal gas constant, and

T=kelvin temperature.

When all the values are entered into the formula, we get:

[tex]R= \frac{PV}{nT} \\R=\frac{ 0.9720* 0.0806}{0.0032*297.2}[/tex]

[tex]R= \frac{0.0783}{0.9510}[/tex]

[tex]R= 0.0821[/tex]

To learn more about the ideal gas constant, refer:-

https://brainly.com/question/22854014

#SPJ4

The Ka of a weak acid is the acid dissociation constant, which is a measure of the strength of the acid.

The Ka of a weak monoprotic acid is basically 1.80×10−5, which is a very weak acid.

To calculate the pH of a 0.0769 m solution of this acid, we first need to calculate the concentration of the hydrogen ions (H+). So, the Ka expression for a weak acid is:

Ka = [H+][A-] / [HA]

Where [H+] is the concentration of hydrogen ions, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the acid.

As we know the Ka and the concentration of the acid (0.0769 M), we can rearrange the equation to solve for [H+]:

[H+] = Ka * [HA]

[H+] = 1.80 x 10-5 * 0.0769

[H+] = 1.38 x 10-6 M

Now that we have the concentration of hydrogen ions, we can calculate the pH of the solution using the equation:

pH = -log[H+]

pH = -log(1.38 x 10-6)

pH = 5.85

What is a Monoprotic acid?

In a chemical reaction, a monoprotic acid can donate one proton (H+) per molecule. A single hydrogen atom is typically bonded to an oxygen, sulfur, or nitrogen atom in these acids. Hydrochloric acid, acetic acid, and sulfuric acid are all examples of monoprotic acids. When a proton is donated, monoprotic acids can form conjugate bases. These conjugate bases are known as monobasic anions and are frequently used in acid-base equilibrium reactions as conjugate pairs.

What is pH?

The pH of a solution determines its acidity or alkalinity. It is measured on a scale of 0 to 14, with 7 representing neutral. Solutions with a pH less than 7 are considered acidic, while solutions with a pH greater than 7 are considered basic or alkaline. The lower the pH number, the greater the acidity, and the higher the pH number, the greater the alkalinity.

To know more about Monoprotic acid,

LINK- https://brainly.com/question/28556909

CODE- #SPJ4

The increasing order of average molecular speed at 25 °C of the mentioned gases are as follows:

CO₂ < O₂ < N₂ < He

It is known that relation between average molecular speed  is directly proportional to its speed and inversely proportional to its molar mass. Average molecular speed depends on its molar mass the lighter the molar mass the faster will be the molecular speed and vice versa.

Molecular speed ∝[tex]\frac{1}{molar mass}[/tex]

Hence,

molar mass of nitrogen= 14 g/mol

Molar mass of helium (He) = 2 g/mol

Molar mass of oxygen  = 16 g/mol

Molar mass of carbon dioxide = 44 g/mol

Thus, given gases are arranged in increasing order of average molecular speed at  as follows;

CO₂ < O₂ < N₂ < He

To look more about Molecular speed click here

brainly.com/question/23946379

#SPJ4

The Calvin cycle is a cyclic pathway that produces three-carbon carbohydrates from CO2.

The Calvin cycle, also known as the light-independent reactions cycle, the bio synthetic phase, the dark reactions cycle, or the photosynthetic carbon reduction cycle, is a series of chemical reactions that convert carbon dioxide and hydrogen-carrier compounds into glucose.

The Calvin cycle reactions are divided into three major stages: carbon fixation, reduction, and molecule regeneration. The Calvin cycle is also known as the C3 cycle because the first stable compound in the cycle is a three carbon compound (3 phosphoglyceric acid). Calvin's cycle reactions occur in three stages.

Some Calvin cycle reactions necessitate the use of ATP (adenosine triphosphate), an energy transfer compound, and NADPH (reduced nicotinamide adenine dinucleotide phosphate), a source of hydrogen atoms for reduction reactions. ATP and NADPH are produced during photosynthesis's light-activated reactions.

To learn more about Calvin cycle, here

https://brainly.com/question/3199721

#SPJ4

As NO(g) is added the volume of oxygen in the measuring tube is decreasing. gives the best interpretation of the negative slope observed in this experiment.

The energy-producing chemical process known as respiration, which powers the metabolisms of most living organisms, depends heavily on oxygen. Many other organisms, including humans, depend on the oxygen in the air we breathe to maintain life.

Nitrogen is oxidized to produce the colorless, poisonous gas known as nitric oxide (NO), sometimes known as nitrogen monoxide. In both humans and other animals, nitric oxide (NO)is a key chemical signaling agent that also has a number of medical uses. It only has a few industrial uses.

Learn more about oxygen here:

https://brainly.com/question/13370320

#SPJ4

In order for the microcontroller to use the main oscillator as the oscillator source is 0x1

What is an oscillator?

A chemical oscillator is a mixture of chemical compounds that are interacting and whose concentration of one or more components changes on a regular basis. They belong to a group of processes that exhibit far from equilibrium non-equilibrium thermodynamics.

what is an configuration ?

A configuration is typically the arrangement of the elements that make up a whole, or the act of doing so.

Therefore, in order for the microcontroller to use the main oscillator as the oscillator source is 0x1

Learn more about oscillator from the given link.

https://brainly.com/question/15169199

#SPJ4

The velocity of a medicine ball is 1.33 × 10-35 m/s².

This refers to the space between identical points (adjacent crests) in the adjacent cycles of a waveform signal propagated win area or along a wire.

Wave is characterized by frequency, wavelength, amplitude, and velocity. When the frequency is constant the wavelength is directly proportional to velocity.

Hence,

Velocity, V ∝ wavelength, λ

Mass,m = 10.0 kg

the wavelength, λ =1.33 × 10-35 m.

Thus,

Assuming constant frequency,

Velocity, V ∝ wavelength, λ

velocity, V= 1.33 × 10-35 m/s²

Learn more about Wavelength on

https://brainly.com/question/13533093

#SPJ1

The two main absorption bands in the ultraviolet spectrum of beta-carotene are associated with transitions in electronic energy levels.

This means that when the molecule absorbs energy from ultraviolet light, electrons move from a lower energy level to a higher energy level, resulting in a decrease in absorbance.

The band in the region corresponding to shorter wavelengths has a lower absorbance than the band in the region corresponding to longer wavelengths because higher energy photons (shorter wavelength light) require more energy to excite the electrons and cause the transition, so less absorbance is observed.

Beta-carotene is an organic compound with an orange color. The diagram above shows the ultraviolet spectrum of beta-carotene. Which of the following statements is true about the absorption bands in the spectrum?

Learn more about the ultraviolet spectrum:

https://brainly.com/question/12222847

#SPJ4

0.04 mol is  the moles of acetic acid produced by the reaction of 2.40 of ethanol.

CH3CH2OH + O2 → H2O + CH3COOH

molar mass, oxygen = 15.999 g/mol

molar mass,carbon =  12.011 g/mol

molar mass, hydrogen = 1.008 g/mol

molar mass of CH3COOH = [ (12.011 x 2) + (1.008 x 4) + (15.999 x 2) ] = 60.052 g/mol

moles= given mass/molecular mass

moles=2.40/60= 0.04 mol

The mole concept is a helpful way to quantify the amount of a substance. When dealing with particles at the atomic (or molecular) level, it is known that even one gram of a pure element contains an enormous number of atoms. The mole concept is frequently used in this context. The most popular unit of measurement is the "mole," which is a count of a significant number of particles.

The number 6.02214076*1023, also known as the Avogadro constant, is frequently denoted by the letter "NA". Among the elementary entities that can be represented in moles are atoms, molecules, monoatomic and polyatomic ions, as well as other particles (such as electrons).

To know more about  moles visit : brainly.com/question/15209553

#SPJ4

First, we need to calculate total moles of acetic buffer. Then, with H-H equation, we need to find ratio of moles of acetate and acetic acid.

The moles of acetate increased are due the addition of moles of NaOH. Thus, we can find the volume of 5.80M NaOH that must be added:

Moles acetic acid and sodium acetate:

Acetic acid: 0.550L * (0.0215mol/L) = 0.011825 moles

Acetate: 0.550L * (0.0255mol/L) = 0.014025 moles

Total moles = 0.02585 moles = [Acetate] + [Acetic acid] (1)

H-H equation:

pH = pKa + log [Acetate] / [Acetic acid]

Where pH is 5.75;

pKa of acetic acid is 4.74;

And [ ] could be taken as moles of each species.

5.75 = 4.74 + log [Acetate] / [Acetic acid]

10.2329 = [Acetate] / [Acetic acid] (2)

Replacing (1) in (2):

10.2329 = 0.02585 - [Acetic acid] / [Acetic acid]

10.2329[Acetic acid] = 0.02585 - [Acetic acid]

11.2329[Acetic acid] = 0.02585

[Acetic acid] = 0.002301 moles.

Moles acetate:

[Acetate] = 0.02585 moles - 0.002301 moles = 0.023549 moles

Initial moles were 0.014025 moles, moles of acetate added (Due the addition of NaOH) are:

0.023549 moles - 0.014025 moles = 0.009524 moles of NaOH

Therefore volume is 0.009524 moles of NaOH * (1L / 5.80mol) = 1.64x10⁻³L = 1.64mL of 5.80M are added

To learn more about moles, refer: https://brainly.com/question/28558113

#SPJ4

The chemical formula of the given compounds are :

a) chromium 3 nitrite : [tex]Cr(NO_{2} )_{3}[/tex]

b)sodium perchlorate:  [tex]NaClO_{4}[/tex]

c) magnesium hydrogen carbonate : [tex]Mg(HCO_{3} )_{2}[/tex]

d) calcium acetate: C₄H₆CaO₄

A chemical formula is a way to communicate information in chemistry about the proportions of atoms that make up a specific chemical compound or molecule. Chemical element symbols, numbers, and occasionally other symbols like parentheses, dashes, brackets, commas, and plus and minus signs are used to represent the chemical elements.

A chemical formula is a phrase that lists the constituent parts of a compound together with their relative proportions. No subscript is used if there is just one atom of a certain kind. A subscript is added to the symbol for an atom if it contains two or more of a certain type of atom.

For more information on chemical formula kindly visit to

https://brainly.com/question/29031056

#SPJ4

So the mass of the product equals the mass of the reactant, The material has holes in it so it is actually lighter in mass than it appears.

Mass of reactants equals mass of products. By inserting the word "moles" between each coefficient and formula, this equation can be read in "moles." A ratio of the moles for any two substances in an equation is known as a mole-mole factor. Acc0rding to the law of conservation of mass, the total mass of reactants and products in a chemical reaction is eq.ual. For instance, the mass of the finished substance, sodium chloride, is equal to the mass of sodium plus the mass of chlorine that reacts with the sodium. Additionally, in a chemical equation, the number of atoms of different elements on the reactants side equals the number of atoms on the products side.

Learn more about mass of the product here:

https://brainly.com/question/7921681

#SPJ4