The two data sets show the number of videos streamed by a group of subscribers during two weeks.
What conclusion can you draw from the data​ display?
Select all that apply.

A. This​ week's IQR is the same as last​ week's IQR. The number of videos streamed this week was as consistent as last week.
B. This​ week's IQR is less than last​ week's IQR. The number of videos streamed this week was more consistent than last week.
C. This​ week's median is greater than last​ week's median. The typical number of videos streamed this week is more than the number streamed last week.
D. This​ week's IQR is greater than last​ week's IQR. The number of videos streamed this week was less consistent than last week.
E. This​ week's median is the same as last​ week's median. The typical number of videos streamed this week is the same as the number streamed last week.
F. This​ week's median is less than last​ week's median. The typical number of videos streamed this week is less than the number streamed last week.

In the year 2000, there were 44 hazardous waste sites in State Y.

Hazardous materials and activities are those that pose a risk to human health, safety and the environment. Examples of hazardous materials include chemicals, flammable and combustible substances, radioactive materials, explosives, biological agents and other substances that may cause harm. Examples of hazardous activities include working with hazardous materials, operating machinery, working with electricity, and performing construction activities. It is important to understand the potential risks associated with hazardous materials and activities in order to protect oneself and others from potential harm.

n + 8 = 2(34 - 8)
n + 8 = 2(26)
n + 8 = 52
n = 44
In the year 2000, there were 44 hazardous waste sites in State Y.

To learn more about construction
https://brainly.com/question/28564643
#SPJ1

From the given data, the probability of Z less than 1.56, greater than 1.56, between 1.56 and 1.81 and less than 1.56 or greater than 1.81 is 0.9406, 0.0359, 0.0235 and 0.9765 respectively.

a. From the cumulative standardized normal distribution table, we can look up the value 1.56 in the left column and find the corresponding value of 0.9406 in the intersecting row. Therefore, the probability that Z is less than 1.56 is 0.9406.

b. From the cumulative standardized normal distribution table, we can look up the value 1.81 in the left column and find the corresponding value of 0.9641 in the intersecting row. Since we want the probability that Z is greater than 1.81, we subtract this value from 1 to get 1 - 0.9641 = 0.0359 (rounded to four decimal places as needed). Therefore, the probability that Z is greater than 1.81 is 0.0359.

c. To find the probability that Z is between 1.56 and 1.81, we need to subtract the probability that Z is less than 1.56 from the probability that Z is less than 1.81. From the table, we know that the probability that Z is less than 1.56 is 0.9406 and the probability that Z is less than 1.81 is 0.9641. Therefore, the probability that Z is between 1.56 and 1.81 is 0.9641 - 0.9406 = 0.0235 (rounded to four decimal places as needed).

d. The probability that Z is less than 1.56 or greater than 1.81 is the sum of the probabilities that Z is less than 1.56 and Z is greater than 1.81, since these events are mutually exclusive. From parts (a) and (b), we know that the probability that Z is less than 1.56 is 0.9406 and the probability that Z is greater than 1.81 is 0.0359. Therefore, the probability that Z is less than 1.56 or greater than 1.81 is 0.9406 + 0.0359 = 0.9765 (rounded to four decimal places as needed).

Learn more about probability here: brainly.com/question/24756209

#SPJ1

[tex]\textit{volume of a cone}\\\\ V=\cfrac{\pi r^2 h}{3}~~ \begin{cases} r=radius\\ h=height\\[-0.5em] \hrulefill\\ V=3.6\\ h=4.2 \end{cases}\implies 3.6=\cfrac{\pi r^2(4.2)}{3}\implies 10.8=4.2\pi r^2 \\\\\\ \cfrac{10.8}{4.2\pi }=r^2\implies \sqrt{\cfrac{10.8}{4.2\pi }}=r\hspace{5em}\stackrel{\textit{diameter = 2r}}{2\sqrt{\cfrac{10.8}{4.2\pi }}} ~~ \approx ~~ \text{\LARGE 1.8}[/tex]

The measurements that does not express volume is (a) 4ft^2

From the question, we have the following parameters that can be used in our computation:

The list of options

The measure of volume is represented by cubic unit

Using the above as a guide, we have the following:

The measurement that does not express volume is 4ft^2.

4ft^2 is a measurement of area (square footage), whereas the other three options are measurements of volume.

This is so because:

So, the unit is (a) 4ft^2

Read more about volume at

https://brainly.com/question/463363

#SPJ1

Around 76.5% of the 200 students polled said they would eat two or three servings, with 48.2% saying they would eat two and 28.3% saying they would eat three.

To get the percentage of students who select two or three servings, we must first add the 48 and 73 students who select two and three servings, respectively, for a total of 121 students.

The percentage is then calculated by dividing this sum by the total number of students polled (200), and multiplying the result by 100: (121/200) x 100 = 60.5%

As a result, 2. or 3. servings were selected by 60.5% of the students questioned. It's important to note that this estimate makes the assumption that each student will only select one option (2 servings or 3 servings), not both.

learn more about student here:

https://brainly.com/question/17332524

#SPJ4

d is not a polynomial coz it has negative power

Proved that if the function f(x,y)=e^(ax+by) with a^2+b^2=1, then f''(xx)+f''(yy)=1

To find the second partial derivatives of f(x, y), we differentiate f(x, y) twice with respect to x and y:

f'(x, y) = ae^(ax + by) and f''(xx) = a^2e^(ax + by)

f'(x, y) = be^(ax + by) and f''(yy) = b^2e^(ax + by)

Adding these second partial derivatives, we get:

f''(xx) + f''(yy) = a^2e^(ax + by) + b^2e^(ax + by)

Since a^2 + b^2 = 1, we have:

f''(xx) + f''(yy) = e^(ax+by)

But f(x, y) = e^(ax+by), so:

f''(xx) + f''(yy) = f(x, y)

Therefore, we have proved that f''(xx) + f''(yy) = 1.

Learn more about second partial derivatives here

brainly.com/question/6732578

#SPJ4

For rectangle type books,  the difference in the heights of their stacks of books is 15 3/4 inches.

What exactly is a rectangle?

A rectangle is a type of quadrilateral (a four-sided polygon) that has four straight sides and four right angles. It is a two-dimensional shape, meaning it lies flat in a plane, and is defined by its two sets of parallel sides, each pair of which are equal in length.

In a rectangle, opposite sides are parallel and congruent (equal in length), and adjacent sides are perpendicular (meet at a right angle). The diagonals of a rectangle bisect each other (divide each other into two equal parts) and are congruent.

The area of a rectangle is calculated by multiplying its length and width, while its perimeter is found by adding the lengths of all its sides. The formula for the area of a rectangle is A = l x w, where A is the area, l is the length, and w is the width. The formula for the perimeter of a rectangle is P = 2l + 2w, where P is the perimeter, l is the length, and w is the width.

Now,

To solve this problem, we need to first find out the height of Rick's stack of books. We know that his stack is 3 times as tall as Trevor's stack, so:

Rick's stack = 3 x Trevor's stack

Rick's stack = 3 x 7 7/8 inches

Rick's stack = 23 5/8 inches

Now that we know the height of both stacks, we can find the difference between them:

Difference = Rick's stack - Trevor's stack

Difference = 23 5/8 inches - 7 7/8 inches

Difference = 15 6/8 inches

Difference = 15 3/4 inches

Therefore, the difference in the heights of their stacks of books is 15 3/4 inches.

To know more about rectangles visit the link

https://brainly.com/question/29123947?referrer=searchResults

#SPJ1

The area of the shape that includes squares will be 9 m² and perimeter will be 16m.

What are squares?

A square has four equal sides and four right angles. It is a special type of rectangle, and like rectangles, it is also a two-dimensional shape with all its sides lying in a plane.

A square has several important properties. Its sides are equal in length, and its diagonals are congruent (equal in length) and bisect each other at right angles. All angles in a square are also right angles, which means that it is a special type of rectangle where all angles measure 90 degrees.

The area of a square is calculated by squaring the side. For example, if a square has a side length of s, its area would be A = s². The perimeter of a square is found by adding up the lengths of all four sides, which is P = 4s.

Now,

The sides of the squares will be 2m, 2m and 1 m.

then area of the figure will be =2²+2²+1²

=4+4+1

=9 m²

and

Perimeter = sum of all sides

then Perimeter=5+2+2+2+2+1+1+1

=16 m

Hence,

          The area of the shape that includes squares will be 9 m² and perimeter will be 16m.

To know more about squares visit the link

https://brainly.com/question/28776767

#SPJ1

Answer:

47 - 6√10

Step-by-step explanation:

Area of a square of side a = a²

Here a = √2 -3√5

Area A = a² = (√2 -3√5)²

We know that (a - b)² = a² -2ab +b²

So

A = (√2 -3√5)²

= (√2)² - 2(√2)(3√5) + (3√5)²

(√2)² = 2   because (√a)² = a

(3√5)² = 3² x (√5)² = 9 x 5 = 45

2(√2)(3√5) = 2 (√2 · 3 · √5)

= 2 x 3 √2 √5

√2√5 = √10

2 x 3 √2 √5 = 2 · 3 · √10 = 6√10

Therefore area = 2 - 6√10 + 45

= 47 - 6√10

Answer:

64

Step-by-step explanation:

When you have 105+x=169

x=64

If you do 169-105 you get 64

64+105=169

The probabilities of the events are:

a) P(A and B) = 0

b) P(A or B)  = 0.9

c) P(notA) = 0.55

d) P(notB) = 0.55

e) P(not(A or B)) = 0.1

f) P(A and (not B)) = 0.45

Probability is the measure of the likelihood or chance of an event occurring. It deals with the study of random events and the analysis of their outcomes.

Since A and B are mutually exclusive, they cannot happen at the same time. This means that P(A and B) = 0.

a) P(A and B) = 0

b) P(A or B) = P(A) + P(B)

P(A or B) = 0.45 + 0.45 = 0.9

c) P(notA) = 1 - P(A)

P(notA) = 1 - 0.45 = 0.55

d) P(notB) = 1 - P(B)

P(notB) = 1 - 0.45 = 0.55

e) P(not(A or B)) = 1 - P(A or B)

P(not(A or B)) = 1 - 0.9 = 0.1

f) P(A and (not B)) = P(A) - P(A and B)

P(A and (not B)) = 0.45 - 0 = 0.45

Learn more about probability on:

https://brainly.com/question/24756209

#SPJ1

Answer:

B

Step-by-step explanation:

In answer choice B, there is the same number of medium bottles as the number of medium bottles that you are given in the question.

Because you know that there are 93 fluid ounces in six small bottles and four medium bottles, you know that any different amount of fluid ounces with the answer choice would be because of the increase in small bottles.

By having a consistent change with only one variable (which is the small bottle) you can find the rate of change. Once you figure out how many fluid ounces are in the small bottles, you can find the total amount of fluid ounces that are in the small bottles. The amount that remains is the total fluid ounces for medium bottles.

Answer:

Step-by-step explanation:

To determine whether (3, 20) is a solution of y = 4x + 8, we need to substitute x = 3 and y = 20 into the equation and check whether the equation is true:

y = 4x + 8

20 = 4(3) + 8

20 = 12 + 8

20 = 20

Since the equation is true, we can say that (3, 20) is a solution of y = 4x + 8.

Answer:

Step-by-step explanation:

y= 4x+8

substituting x=3,

y= 4(3)+8

y= 12+8

y=20

∴ (3,20) is a solution of y= 4x+8

The measure of angle PQR is 50 degrees thus correct option is C) 50 degrees.

What is proportion?

A proportion is a statement that two ratios or fractions are equal. In proportion, the numerator of one fraction is proportional to the numerator of another fraction, and the denominator of one fraction is proportional to the denominator of another fraction. For example, if we have two ratios, a/b, and c/d, we can write them as a proportion as follows:

a/b = c/d

This means that the ratio of a to b is equal to the ratio of c to d. We can also write this as a fraction:

a/b = c/d = (a/b)/(c/d)

If the measure of angle PQR to the measure of angle PQS is in the ratio of 5:9, and the measure of angle PQS is 90 degrees, we can use this information to find the measure of angle PQR.

Let x be the measure of angle PQR in degrees. Then we can set up the following proportion:

5/9 = x/90

To solve for x, we can cross-multiply:

9x = 5 * 90

9x = 450

x = 50

Therefore, the measure of angle PQR is 50 degrees. Answer choice C) 50 degrees is the correct answer.

To know more about proportion visit:

brainly.com/question/29765554

#SPJ1

Answer: The equation of a line can be written in slope-intercept form as:

y = mx + b

where m is the slope and b is the y-intercept.

We are given that the line has a slope of -3 and passes through the point (2, 2). We can use the point-slope form of the equation of a line to find the equation of this line:

y - y1 = m(x - x1)

where (x1, y1) is the given point and m is the slope.

Substituting the given values, we get:

y - 2 = -3(x - 2)

Expanding the right side:

y - 2 = -3x + 6

Adding 2 to both sides:

y = -3x + 8

Therefore, the equation of the line that has a slope of -3 and passes through the point (2, 2) is:

y = -3x + 8.

So the correct answer is:

y = -3x + 8

Step-by-step explanation:

Answer:

y=-3x+8

3x+y=8

y-2=-3(x-2)

u have a blessed day bru

Answer: One third

Step-by-step explanation: If you blow up a third of the balloons then you've blown 4 up because 12 divided by 3 is 4. Then you add the 5 balloons your friend blew up leaving you with 9 blown-up balloons in total. 9 blown-up balloons out of 12 is 2 thirds of the balloons leaving you with only one-third left to blow up.

Answer:

1/4

I hope this helps you <3

The dilation is an enlargement, and Tashi is correct.

To determine whether the dilation (scaling) is a reduction or an enlargement, we need to compare the distances between corresponding points on the original figure and the dilated figure.

Suppose a point P(x,y) is on the original figure. After the dilation with the rule (6/5x, 6/5y), the corresponding point P'(x', y') will be:

P' = (6/5x, 6/5y)

The distance between point P and the origin is given by:

d(P) = √(x² + y²)

The distance between point P' and the origin is:

d(P') = √((6/5x)² + (6/5y)²)

= 6/5 * √(x² + y²)

Since the dilation multiplies each coordinate by a factor of 6/5, the distance between any point and the origin is multiplied by a factor of 6/5.

Therefore, if 6/5 < 1, then the distances between corresponding points are reduced, and the dilation is a reduction. If 6/5 > 1, then the distances are increased, and the dilation is an enlargement.

In this case, we have:

6/5 > 1

Therefore, the dilation is an enlargement, and Tashi is correct.

Learn more about dilation

https://brainly.com/question/13176891

#SPJ1

Answer:

Slope = (-3/2)

Step-by-step explanation:

Slope(m) = (Y2 - Y1) / (X2 - X1)

= (0-3) / (2-0)

= (-3/2) Is the ans....

The rate of change of each given function are:

To find the rate of change of given functions, we have to differentiate the given function w.r.t the variable provided. We will solve each part of the question and differentiate the functions step by step.

The function is, f(x) = 5x² + 3x - 7

Differentiating the above function, we get;

f'(x) = (5x² + 3x - 7)/dx

f'(x) = 10x + 3

Therefore, the rate of change of function f(x) = 5x² + 3x - 7 is 10x + 3.

Now, let us solve the second part of the question.

The function is,[tex]\( g(x)=\frac{-5 x+7}{2 x-3} \)[/tex]

Differentiating the above function using the quotient rule, we get;

[tex]\[\begin{aligned} g'(x)&=\frac{(2x-3)\cdot (-5)-(7)\cdot(2)}{(2x-3)^2}\\ &=\frac{-10x+11}{(2x-3)^2}\end{aligned}\][/tex]

Therefore, the rate of change of function [tex][tex]\( g(x)=\frac{-5 x+7}{2 x-3} \) is \( \frac{-10x+11}{(2x-3)^2} \).[/tex][/tex]

Learn more about Rate of Change here: brainly.com/question/29518179

#SPJ11

The height of the cone is 11 mm and the slant height of the cone is 23 mm and the ant crawls 31 mm to get from the base of the cone to the top of the hill.

What is the volume of the right circular cone?

A right circular cone is a three-dimensional geometric shape that has a circular base and a vertex that is located directly above the center of the base. The axis of the cone is a line that passes through the vertex and the center of the base.

The volume of a right circular cone can be found using the formula:

[tex]V = (1/3)\pi r^2h[/tex]

where V is the volume of the cone, r is the radius of the circular base, and h is the height of the cone.

1) To find the height of the cone, we need to use the formula for the volume of a cone, which is [tex]V = (1/3)\pi r^2h[/tex]. Rearranging this formula, we get:

[tex]h = 3V / \pi r^2[/tex]

Substituting the given values, we get:

[tex]h = 3(8792) / (3.14)(20^2)[/tex]

h ≈ 11

Therefore, the height of the cone is approximately 11 mm.

2) To find the slant height of the cone, we can use the Pythagorean theorem, which states that in a right triangle, the square of the hypotenuse (the longest side) is equal to the sum of the squares of the other two sides.

In the case of the cone, the slant height is the hypotenuse of a right triangle formed by the height and the radius of the base. Therefore, we have:

[tex]s^2 = r^2 + h^2[/tex]

Substituting the values we found in part 1, we get:

[tex]s^2 = 20^2 + 11^2[/tex]

s ≈ 23

Therefore, the slant height of the cone is approximately 23 mm.

3) To find the distance the ant crawls to get from the base of the cone to the top of the hill, we can use the Pythagorean theorem again. This time, we need to find the distance along the slant height from the base of the cone to the top of the hill. This distance is the hypotenuse of a right triangle formed by the distance from the base to the apex (which is the height of the cone) and the radius of the base. Therefore, we have:

[tex]d^2 = r^2 + s^2[/tex]

Substituting the values we found in parts 1 and 2, we get:

[tex]d^2 = 20^2 + 23^2[/tex]

d ≈ 31

Therefore, the ant crawls approximately 31 mm to get from the base of the cone to the top of the hill.

To know more about the volume of a right circular cone visit:

brainly.com/question/29767724

#SPJ1

The Pacific Ocean is roughly 100 times bigger than the Gulf of Mexico.

Ocean is the largest and most prominent feature of the Earth's surface. It covers more than 70% of the planet and contains 97% of its water. Oceans are vital to life on Earth, providing food and resources, regulating the climate, and supporting a vast array of marine life. They are home to a variety of habitats including coral reefs, deep sea trenches, and shallow coastal estuaries.

The Pacific Ocean covers an area of roughly 63.8 million square miles (165.2 million square kilometers), while the Gulf of Mexico covers an area of only 615,000 square miles (1.6 million square kilometers). This means that the Pacific Ocean is roughly 6 x 105 (or 600,000) times bigger than the Gulf of Mexico.

To learn more about Ocean
https://brainly.com/question/1824354
#SPJ1

The probability of either A or B occurring is 0.55625.

The probability of either A or B occurring when given that events A and B are independent, and P(A) = 0.25 and P(B) = 0.45, can be calculated as follows: 0.25 + 0.45 - 0.25*0.45= 0.55625.:

When the events A and B are independent, then the probability of the two events occurring together is given as:P(A ∩ B) = P(A) × P(B)This is a formula for independent events, and when events A and B are independent, it implies that P(A ∩ B) = 0.

Therefore:P(A ∪ B) = P(A) + P(B) - P(A ∩ B)When the probability of A and B is given as P(A) = 0.25 and P(B) = 0.45, we can substitute these values in the above equation as:P(A ∪ B) = P(A) + P(B) - P(A) × P(B)Thus:P(A ∪ B) = 0.25 + 0.45 - 0.25*0.45= 0.55625Therefore, the probability of either A or B occurring is 0.55625.

Learn more about Probability

brainly.com/question/30034780

#SPJ11

Answer:

Step-by-step explanation:

Square (top right), rectangle (middle bottom), and trapezoid (bottom right)

if u do it right then u should get this answer.

Answer:

a.4

Step-by-step explanation: You first work on the parentheses( 7+9)=16. Then you multiply m and 16. Which is 0.5(16) or 16/2=8 now it’s 8/2 which is 4 .

Answer:

Using the quadratic formula, we find that:

x = 0.555 or x = 89.445

We can ignore the first solution since it doesn't make sense for the speed of a train. Therefore, the speed of the slower train is approximately 89.445 mph, and the speed of the faster train is approximately 94.445 mph.

So, the answer is:

The speed of the slower train is approximately 89.445 mph, and the speed of the faster train is approximately 94.445 mph.NOT SURE

Step-by-step explanation:

There are 44 Democratic senators and no Independent senators based on ratio.

Since the ratio of Republicans to Democrats is 5:4, we can represent the number of Republican senators as 5x and the number of Democratic senators as 4x, where x is a positive integer. The total number of senators is given as 100, so we have:

5x + 4x + Independent = 100

Simplifying:

9x + Independent = 100

To find the values of x and Independent, we need to solve for these variables. We can start by subtracting Independent from both sides of the equation:

9x = 100 - Independent

Now, we need to find a value of x that makes the right-hand side of the equation divisible by 9. Since the sum of the digits of 100 is 1 + 0 + 0 = 1, which is not divisible by 9, we need to find a value of Independent that makes the sum of the digits of 100 - Independent divisible by 9. The only value that works is Independent = 1, which gives us:

9x = 99

x = 11

Now we can substitute this value of x back into the equation to find the number of Republican and Democratic senators:

Republican = 5x = 5(11) = 55

Democrat = 4x = 4(11) = 44

Learn more about ratio here:

https://brainly.com/question/13419413

#SPJ4

The nth term of an AP with the first term a_1 and the common difference d is given by a_n = a_1 + (n-1)d. The nth term of the given AP is a_n = -54 + (n-1)7.

Arithmetic Progression (AP) is a sequence of numbers in which the difference between the two consecutive numbers is always the same. Each number in the sequence is called a term of the progression. It is a type of sequence where the difference between consecutive terms is constant.

The given expression is an arithmetic progression (AP), in which the common difference between consecutive terms is 7. An AP is a sequence of numbers where each term after the first is formed by adding a fixed value to the preceding one.

The first term of the AP is given as a_1=-54 and the common difference (d) is 7. Thus, the nth term of the given AP can be found using the formula a_n = a_1 + (n-1)d. Substituting the values in this formula, we get a_n = -54 + (n-1)7.

Therefore, the nth term of the given AP is a_n = -54 + (n-1)7.

For example, if n = 10, then the 10th term of the given AP is a_10 = -54 + (10-1)7 = -54 + 63 = 9.

In general, the nth term of an AP with the first term a_1 and the common difference d is given by a_n = a_1 + (n-1)d.

For more questions related to arithmetic progression

https://brainly.com/question/24191546

#SPJ1

The nth term of the given AP is [tex]a_n[/tex] = -54 + (n-1)7. The nth term of an Arithmetic Progression with the first term [tex]a_1[/tex] and the common difference d is given by [tex]a_n[/tex] =    [tex]a_1[/tex]  + (n-1)d.

It is a sequence of numbers in which the difference between the two consecutive numbers is always the same. Each number in the sequence is called a term of the progression.

The given expression is an arithmetic progression (AP), in which the common difference between consecutive terms is 7.

The first term of the AP is given as [tex]a_1[/tex] =-54 and the common difference (d) is 7.

Thus, the nth term of the given AP can be found using the formula

[tex]a_n[/tex] =  [tex]a_1[/tex] + (n-1)d.

Substituting the values in this formula, we get

[tex]a_n[/tex] = -54 + (n-1)7.

Therefore, the nth term of the given AP is

[tex]a_n[/tex] = -54 + (n-1)7.

In general, the nth term of an AP with the first term [tex]a_1[/tex] and the common difference d is given by [tex]a_n[/tex] =  [tex]a_1[/tex]  + (n-1)d.

For more questions related to arithmetic progression

https://brainly.com/question/24191546

#SPJ1

Question:

Find the nth term by using the given data.

[tex]a_1[/tex] =-54 ; [tex]a_n[/tex] = [tex]a_(n-1)[/tex] +7

The total length of oak wood the customer purchase is 198 feet

The required stem and leaf plot is missing

So, I will make use of the attached plot to answer the question

From the question, we understand that the customer purchase are:

From the attached stem and leaf plot, we have the following readings:

When these lengths are added, we have

Total = 21 + 23 + 61 + 93

Evaluate the sum

Total = 198

Hence, the length of purchase is 198 feet

Read more about stem plots at

https://brainly.com/question/8649311

#SPJ1