The rollercoaster has a speed of 176 ft/sec. This can be converted to miles per hour. The speed is equivalent to 120 mph.
What is speed ?Speed is a physical quantity measuring the distance travelled by an object per unit time. Speed is a scalar quantity. The rate of speed is called velocity.
The speed can be expressed in different units. such as m/s, km/h, ft./s miles per hour etc. These units can be interconverted using specific relations.
One ft/s = 0.682 mph
then, 176 ft./s = 0.682 × 176 = 120 mph.
Therefore, the speed of the roller coaster is 120 mph.
Find more on speed:
https://brainly.com/question/7359669
#SPJ1
50mL of ethanol (density=0.79 g/mL) is dissolved by 400 mL of water. What is the concentration of ethanol in this solution?
The concentration of ethanol in this solution : 2.14 M
Further explanationMolarity is a way to express the density of the solution
Molarity shows the number of moles of solute in every 1 liter of solute or mmol in each ml of solution
[tex]\tt \large{\boxed{\bold {M ~ = ~ \dfrac {n} {V}}}[/tex]
Where
M = Molarity
n = Number of moles of solute
V = Volume of solution
Ethanol(C₂H₅OH) MW =46,06844 g/mol[
mass of solute (Ethanol)[tex]\tt 50\times 0.79=39.5~g[/tex]
mol of Ethanol[tex]\tt \dfrac{39.5}{46.06844}=0.8574[/tex]
molarity[tex]\tt \dfrac{0.8574}{0.4}=2.14~M[/tex]
what is the mass in grams of 0.00125 mole of sodium Na=23
Answer:
0.03g
Explanation:
Given parameters:
Number of moles of Na = 0.00125mole
Unknown:
Mass in grams of Na = ?
Solution:
To find the mass of this substance, we simply multiply the number of moles with the given molar mass of Na.
Mass of Na = number of moles x molar mass
Mass of Na = 0.00125 x 23 = 0.03g
Calculate the energy and frequency of red light having a wavelength of 6.55 x 10⁻7m.
Answer:
E = 3.035× 10-¹⁹J = 1.9eV
f = 4.58 × 10¹⁴Hz
Explanation:
wavelength = 6.55 × 10-⁷m
c = 3 × 10⁸m/s
f = ?
E = ?
a) f = c/wavelength
f = 3 × 10⁸/6.55 × 10-⁷
f = 4.58 × 10¹⁴Hz
b) E = hc/wavelength
E = 6.626×10-³⁴ × 3 × 10⁸/ 6.55 × 10-⁷
E = 3.035 × 10-¹⁹J
1ev = 1.6 × 10-¹⁹J
Therefore E = 3.035/1.6 = 1.9eV
What is the relationship between plastic and gasoline?
Answer:
Explanation:
Both plastic and gasoline are products of pretroleum
Which of the following would be a clue that rock is igneous?
A.It has crystals.
B.It has a complete fossil in it.
C.It has bands.
D.It is very soft.
Answer:
A is the answer to your question
They usually have crystals since they are formed from lava
__________ occurs when a gas changes directly into a solid without going through a liquid phase. *
sublimation
vaporization
condensation
deposition
Answer:
Deposition
Explanation:
Deposition is the phase transition in which gas transforms into solid without passing through the liquid phase. Deposition is a thermodynamic process. The reverse of deposition is sublimation and hence sometimes deposition is called desublimation.
How can you separate sand, sugar and gravel
Answer:
Grating
Explanation:
I think you need to grate it
Answer: The sugar would dissolve in water. You could then pour off the solution and wash the remaining sand with a bit more water. Heat the water to evaporate it from the sugar, and the two are separate
Explanation:
Yo I need help with 1 and 2
Answer:
1-
A) H2O B) HCO3-
2-
A) NH3 B) SO3-2
Explanation:
25 pointss How do the plates and mantle interact at each type of plate boundary?
Answer:
what that girl said lol
Answer:
honestly.. idk lol
Explanation:
10.8 1.0
Electronegativity difference of Mg and O:
yes
no
Answer:
2.3 / yes
Explanation:
edg 2020
Answer: 2.3 and yes
Explanation:
A compound composed of only C and H contains 79.88 % C by mass. What is its empirical formula?
C a CH 3
Ob.CH 2
Oc CH 4
0 0 CH
Оe. Сэн
Answer:
a. CH3
Hope this helps.
i need help on this its due Monday
The properties of the elements can be determined from their electron configuration
Further explanationMg ⇒electron configuration :[Ne] 3s²outer electron : 2 (3s²)
lose(2 electron)
charge : +2
cation (positive)
symbol : Mg²⁺
Br⇒electron configuration : [Ar] 4s²3d¹⁰4p⁵outer electron : 7 (4s²4p⁵)
gain ( 1 electron)
charge : -1
anion (negative)
symbol : Br⁻
Helium⇒electron configuration : 1s²
outer electron : 2 (1s²)
stabil(no gain/no lose)
charge : 0
neutral
symbol : He
Nitrogen ⇒electron configuration : [He] 2s²2p³outer electron : 5 ( 2s²2p³)
gain(3 electron)
charge : -3
anion
symbol : N³⁻
Ionic compound to name ai2o3
Explanation:
aluminium oxide had the chemical formula Al2O3
The name of ionic compound Al₂O₃ is aluminium oxide.
The naming of ionic compounds involves using the names of the constituent ions to form the compound's name. The name of the cation (positively charged ion) comes first, followed by the name of the anion (negatively charged ion).
Here are the general steps to name an ionic compound:
Name the cation: Use the name of the metal or polyatomic ion as it appears in the periodic table or ion list. If the metal has multiple oxidation states, use Roman numerals in parentheses to indicate the charge.Name the anion: For monatomic anions (single atoms), use the root name of the nonmetal element and add the suffix "-ide." For polyatomic anions (multiple atoms bonded together), use their specific names as listed in tables or formulas.Combine the names: Put the cation name first, followed by the anion name.Learn more about Naming of ionic compounds, here:
https://brainly.com/question/1502766
#SPJ6
state the volume of SO2 and O2 at RTP that would produce 180cm3 of SO3
Answer:
(180 cm^3 SO3) x (2 mol SO2 / 2 mol SO3) = 180 cm^3 SO2
(180 cm^3 SO3) x (1 mol O2 / 2 mol SO3) = 90 cm^3 O2
Which has a lower freezing point oxygen or ethanol
Answer:
Oxygen
Explanation:
i REALLY think it is
A forensic chemist performs a flame test on a substance found at a crime scene. What can the scientist conclude it the sample produces a green flame?
Answer: The forensic examination of substances involve a preliminary flame test.
Explanation:
The forensic chemical analysis of samples involves the flame testing which is one of the preliminary test. The materials are burned on a flame and the color of the flame is considered indicative of the elements present in the material.
The substances like Borax (sodium borate), Copper(II) sulfate, and boric acid burn with a characteristic green flame.
**WHOEVER SOLVES THIS GETS A LOT OF POINTS
***Look at img below
Answer:
what
Explanation:
I cant see your question yet
Answer:
the question really said :
Substance A is tested to see if it is an acid or a base. A piece of iron is placed
in substance A and the iron starts to wear away over time (corrosive).
Substance A has a sour taste, and will produce a burning/tingling feeling
when touched with a bare hand. Is Substance A an acid or a base?
Answer:
[tex]\huge\boxed{\sf Acid}[/tex]
Explanation:
An acid has the following properties:
=> Is corrosive to Iron and reacts with it.
=> Has a sour taste.
=> Produces a burning sensation when touched.
So, Substance A is an acid.
[tex]\rule[225]{225}{2}[/tex]
Hope this helped!
~AnonymousHelper1807Copper sulfate, when it is dissolved in water, has a blue color. When steel wool is mixed with a copper sulfate solution, the steel wool disappears, a brownish solid forms, and the color of the solution changes from blue to green.
Choose one answer that gives the best evidence that a chemical reaction took place.
A. The color change from blue to green happens in nature.
B. The disappearance of the steel wool shows that a new substance has formed.
C. The solid precipitate is a waste product in the reaction.
D. Energy is lost in this reaction like all other reactions.
Which answer did you choose? Explain your reasoning.
Answer:
A. The color change from blue to green happens in nature.
Explanation:
The color change is an indicator of a chemical reaction that has occurred. Although color changes are not necessarily good diagnostic tool to measure if a chemical reaction has occurred or not.
In this reaction, color changes is quite an effective tool Chemical changes usually involves the formation of a new product from the chemical reaction. Also, the steps are not easily reversible.For this reaction, color change is the most appropriate signal for a chemical change.The evidence that shows that a chemical reaction has taken place is the disappearance of the steel wool shows that a new substance has formed.
The electrochemical series is arrangement of elements in order of decreasing reactivity. It is important to note that the elements that are high up in the electrochemical series can displace the elements that are lower in the series from their aqueous solution.
Steel contains iron which lies above copper in the electrochemical series hence a chemical change occurs when steel dissolves in the copper solution.
Hence, the evidence that shows that a chemical reaction has taken place is the disappearance of the steel wool shows that a new substance has formed.
Learn more: https://brainly.com/question/8646601
The source of alpha particles in a smoke detector is the
The source of alpha particles in a smoke detector is the Americium.
Ethanol is a:
A. substance
B. heterogeneous mixture
C. homogenous mixture
Answer: i think it is A
Explanation:
hope this helps!
PLEASE answer these for a brainlist
What are some examples of the flint water crisis? What are adults experiencing in their water and what are the effects on the kids?
What are the safe levels of Lead exposure?
What is the relationship between the blood levels in people and crime rate?
What was the decision made by Flint to save money on water?
What happened in October 2015? How did the water switch affect the people's blood lead levels?
Answer:
avada kadvera
Explanation:
what comes around goes around
WILL GIVE BRAINLIEST
Answer:
1 Mole
Explanation:
1 mole is equal to 1 moles NH4, or 18.03846 grams.
All elements are unstable except the noble gases
True or False
Answer:
True
Explanation:
Noble gases already have the maximum number of valence electrons they can hold so they are the only stable group
!PLEASE HELP ASAP!
Ammonium chloride reacts with calcium oxide to produce ammonia, calcium chloride, and water. If 7.4 grams of ammonia are produced, how many grams of calcium chloride are also
produced?
Answer:
Mass of calcium chloride produced = 24.14 g
Explanation:
Given data:
Mass of ammonia produced = 7.4 g
Mass of calcium chloride produced = ?
Solution:
Chemical equation:
2NH₄Cl + CaO → 2NH₃ + H₂O + CaCl₂
Number of moles of ammonia produced:
Number of moles = mass/molar mass
Number of moles = 7.4 g/ 17 g/mol
Number of moles = 0.435 mol
Now we will compare the moles of ammonia and calcium chloride.
NH₃ : CaCl₂
2 : 1
0.435 : 1/2×0.435 = 0.2175 mol
Mass of calcium chloride produced:
Mass = number of moles × molar mass
Mass = 0.2175 mol ×110.98 g/mol
Mass = 24.14 g
What is this please help
Answer:
I think the answer is A. I am only 50% sure I am correct, but hope it helps!
Explanation:
How many moles are in 35.0g of sodium (Na).
Answer:
2.5 I don't have a explanation
Which of the following are properties of ionic compounds?
A. hard solids with high melting and boiling points.
B. soft and good conductors of electricity.
C. both A and B
D. good conductors of electricity, but only when dissolved in water
Answer:a and d
Explanation:
The properties of ionic compounds are hard solids with high melting and boiling points and good conductors of electricity, but only when dissolved in water and the correct options are option A and D.
What are Ionic solids?Ionic solids are made up of ions joined together by ionic bonds. "Ionic bonding" is a type of chemical bond between a positive and a negatively charged ion where the transfer of electrons occurs.
They are too hard, and the ionic solids’ melting point is usually too high due to powerful forces between the anions and cations.
They are known as electrical insulators when they are in a solid-state. Apart from this, the molten salts do behave with electricity since the ions are not closed in the lattice.
Therefore, the properties of ionic compounds are hard solids with high melting and boiling points and good conductors of electricity, but only when dissolved in water and the correct options are option A and D.
Learn more about Ionic solids, here:
https://brainly.com/question/15241125
#SPJ2
why is iron important constructing bridges and houses?
A wave with a higher frequency has a longer wavelength
TRUE
FALSE
Answer:
FalseA wave with a higher frequency have a shorter wavelength, the higher the sound it, the closer the arcs of the wavelength are, the faster the sound is, the shorter they are.
According to scied.ucar.edu ~ "The frequency of a wave is inversely proportional to its wavelength. That means that waves with a high frequency have a short wavelength, while waves with a low frequency have a longer wavelength. Light waves have very, very short wavelengths."
Hope this helps
Explanation:
May I have brainliest please? :)
A wave with a higher frequency has a longer wavelength is a false.
Relation of frequency, energy and wavelengthA wave with a higher frequency has a longer wavelength is a false statement because shorter wavelength have higher frequency and also higher energy.
We know that longer wavelength of a wave having shorter frequency and shorter energy while on the other hand, the shorter wavelength of a wave having higher frequency and higher energy so we can conclude that the statement is false.
Learn more about frequency here: https://brainly.com/question/254161